The "No D-channels available! Using Primary channel as D-channel anyway!"
WARNING message has been confusing on non-NFAS setups. The message refers
to things that are NFAS specific.
* Changed the warning to several different warnings to be more accurate
for the situation and less confusing as a result:
"No D-channels up! Switching selected D-channel from X to Y.",
"No D-channels up!", and
"D-channel is down!".
........
Merged revisions 342484 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 342485 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@342486 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r338323 | rmudgett | 2011-09-28 17:36:57 -0500 (Wed, 28 Sep 2011) | 12 lines
Merged revisions 338322 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r338322 | rmudgett | 2011-09-28 17:35:52 -0500 (Wed, 28 Sep 2011) | 5 lines
Make duplicate call ptr warning message more helpful.
* Adds the value of the call ptr to the duplicate call ptr message to help
trace why there is a duplicate call ptr.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@338324 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r337721 | rmudgett | 2011-09-22 16:37:41 -0500 (Thu, 22 Sep 2011) | 25 lines
Merged revisions 337720 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r337720 | rmudgett | 2011-09-22 16:29:46 -0500 (Thu, 22 Sep 2011) | 18 lines
Made ISDN not add numbering plan prefix strings to empty numbers.
When the Caller-ID is restricted, the expected behavior is for the
Caller-ID to be blank. In chan_dahdi, the national prefix is placed onto
the Caller-ID number even if it is restricted (empty) causing the
Caller-ID to be the national prefix rather than blank.
This behavior was lost when sig_pri was extracted from chan_dahdi.
* Made not add prefix strings to empty connected line, calling, and ANI
number strings.
(closes issue ASTERISK-18577)
Reported by: Kris Shaw
Patches:
jira_asterisk_18577_v1.8.patch (license #5621) patch uploaded by rmudgett
Tested by: Kris Shaw
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@337722 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r335078 | mjordan | 2011-09-09 11:27:01 -0500 (Fri, 09 Sep 2011) | 29 lines
Merged revisions 335064 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r335064 | mjordan | 2011-09-09 11:09:09 -0500 (Fri, 09 Sep 2011) | 23 lines
Updated SIP 484 handling; added Incomplete control frame
When a SIP phone uses the dial application and receives a 484 Address
Incomplete response, if overlapped dialing is enabled for SIP, then
the 484 Address Incomplete is forwarded back to the SIP phone and the
HANGUPCAUSE channel variable is set to 28. Previously, the Incomplete
application dialplan logic was automatically triggered; now, explicit
dialplan usage of the application is required.
Additionally, this patch adds a new AST_CONTOL_FRAME type called
AST_CONTROL_INCOMPLETE. If a channel driver receives this control frame,
it is an indication that the dialplan expects more digits back from the
device. If the device supports overlap dialing it should attempt to
notify the device that the dialplan is waiting for more digits; otherwise,
it can handle the frame in a manner appropriate to the channel driver.
(closes issue ASTERISK-17288)
Reported by: Mikael Carlsson
Tested by: Matthew Jordan
Review: https://reviewboard.asterisk.org/r/1416/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@335079 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r332265 | rmudgett | 2011-08-17 11:01:29 -0500 (Wed, 17 Aug 2011) | 33 lines
Merged revisions 332264 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r332264 | rmudgett | 2011-08-17 10:51:08 -0500 (Wed, 17 Aug 2011) | 26 lines
Outgoing BRI calls fail when using Asterisk 1.8 with HA8, HB8, and B410P cards.
France Telecom brings layer 2 and layer 1 down on BRI lines when the line
is idle. When layer 1 goes down Asterisk cannot make outgoing calls and
the HA8 and HB8 cards also get IRQ misses.
The inability to make outgoing calls is because the line is in red alarm
and Asterisk will not make calls over a line it considers unavailable.
The IRQ misses for the HA8 and HB8 card are because the hardware is
switching clock sources from the line which just brought layer 1 down to
internal timing.
There is a DAHDI option for the B410P card to not tell Asterisk that layer
1 went down so Asterisk will allow outgoing calls: "modprobe wcb4xxp
teignored=1". There is a similar DAHDI option for the HA8 and HB8 cards:
"modprobe wctdm24xxp bri_teignored=1". Unfortunately that will not clear
up the IRQ misses when the telco brings layer 1 down.
* Add layer 2 persistence option to customize the layer 2 behavior on BRI
PTMP lines. The new option has three settings: 1) Use libpri default
layer 2 setting. 2) Keep layer 2 up. Bring layer 2 back up when the peer
brings it down. 3) Leave layer 2 down when the peer brings it down.
Layer 2 will be brought up as needed for outgoing calls.
JIRA AST-598
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@332270 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r330051 | rmudgett | 2011-07-28 12:10:37 -0500 (Thu, 28 Jul 2011) | 29 lines
Merged revisions 330050 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r330050 | rmudgett | 2011-07-28 12:04:24 -0500 (Thu, 28 Jul 2011) | 22 lines
Merged revisions 330033 from
https://origsvn.digium.com/svn/asterisk/be/branches/C.3-bier
..........
r330033 | rmudgett | 2011-07-28 11:26:38 -0500 (Thu, 28 Jul 2011) | 15 lines
Datacalls with B410P fail.
Incoming and outgoing call legs of a data call are using different
formats: a-law, u-law. When the call is bridged, the media stream is run
through translation to convert the media formats. The translation is bad
for data calls.
* Make incoming call that does not explicitly specify u-law or a-law use
the DAHDI channel's default law. The outgoing call always uses the
default law from the DAHDI channel.
(closes issue ABE-2800)
Patches:
jira_abe_2800_companding.patch (license #5621) patch uploaded by rmudgett
..........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@330052 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The NEC SV8300 rejects the Q931_IE_TIME_DATE for Q.SIG.
Add option to specify if and how much of the current time is put in
Q931_IE_TIME_DATE.
* Send date/time ie never.
* Send date/time ie date only.
* Send date/time ie date and hour.
* Send date/time ie date, hour, and minute.
* Send date/time ie date, hour, minute, and second.
* Send date/time ie default: Libpri will send date and hhmm only when in
NT PTMP mode to support ISDN phones.
(closes issue #19221)
Reported by: kenner
JIRA SWP-3396
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@319427 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r318783 | rmudgett | 2011-05-12 20:47:05 -0500 (Thu, 12 May 2011) | 14 lines
PRI early media won't ring.
And another way to pass early media. Don't indicate that there is inband
information present, just assume that the B channel is connected.
* Restore clearing the dialing flag Rx squelch unconditionally when a
PROCEEDING message comes in.
(closes issue #19268)
Reported by: tbsky
Patches:
issue19268_v1.8.patch uploaded by rmudgett (license 664)
Tested by: tbsky
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@318784 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r318499 | rmudgett | 2011-05-10 18:41:08 -0500 (Tue, 10 May 2011) | 15 lines
Unable to pickup DAHDI/PRI call because call state is reported as DIALING.
The channel state is not updated to RINGING when an ALERTING message is
received. Regression caused when sig_pri.c (also sig_ss7.c) extracted
from chan_dahdi.c.
* Added missing channel state update to RINGING when the
AST_CONTROL_RINGING frame is queued for ISDN and SS7.
(closes issue #19257)
Reported by: alecdavis
Patches:
issue19257_v1.8_v2.patch uploaded by rmudgett (license 664)
Tested by: alecdavis, rmudgett
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@318500 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r318231 | rmudgett | 2011-05-09 11:57:18 -0500 (Mon, 09 May 2011) | 41 lines
Don't get early media for ISDN on outgoing calls.
It looks to be a long-standing misinterpretation of the progress indicator
ie values:
1 - Call is not end-to-end ISDN; further call progress information may be
available in-band.
8 - In-band information or an appropriate pattern is now available.
Only value 8 is handled by chan_dahdi/sig_pri. The 1 value is not handled
as early media probably because the meaning of the second half of it's
description was overlooked.
* Test to see if either PRI_PROG_CALL_NOT_E2E_ISDN(1) or
PRI_PROG_INBAND_AVAILABLE(8) bits are set to open the media path.
(closes issue #18868)
Reported by: isrl
Patches:
issue18868_19246_v1.8.patch uploaded by rmudgett (license 664)
Tested by: satish_lx
..........
No inband progress on PRI_EVENT_RINGING even if inband flag set.
My ISDN-PRI provider sends an ALERTING with "Inband information or
appropriate pattern now available", but Asterisk only generates and passes
the RING to the SIP extension, not the inband message. Unfortunately, the
inband message is not a ringback tone but a prompt that says the number is
not in service. The SIP extension then hears two rings and the call is
hungup which confuses the caller.
* Post an AST_CONTROL_PROGRESS as well as opening the media path if inband
audio is indicated with an ALERTING message.
(closes issue #19246)
Reported by: cristiandimache
Patches:
issue19246_v1.8.patch uploaded by rmudgett (license 664)
Tested by: cristiandimache
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@318232 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r316224 | rmudgett | 2011-05-03 14:18:30 -0500 (Tue, 03 May 2011) | 16 lines
The dahdi_hangup() call does not clean up the channel fully.
After dahdi_hangup() has supposedly hungup an ISDN channel there is still
traffic on the S0-bus because the channel was not cleaned up fully.
Shuffled the hangup code to include some missing cleanup. Also fixed some
code formatting in the area. I think the primary missing clean up code
was the call to tone_zone_play_tone() to turn off any active tones on the
channel.
(closes issue #19188)
Reported by: jg1234
Patches:
issue19188_v1.8.patch uploaded by rmudgett (license 664)
Tested by: jg1234
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@316240 65c4cc65-6c06-0410-ace0-fbb531ad65f3
PRIShowSpans works like the AMI action DAHDIShowChannels but for PRI
spans. It is similar to the CLI command "pri show spans".
(closes issue #15980)
Reported by: dwery
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@314735 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The "controlling user number" is always the number of the voice mail box
which is identical with the subscriber number itself. This number which
is listed in the ISDN phone MWI menu cannot be called back to contact the
voice mail box. The controlling user number should be made configurable.
JIRA ABE-2738
JIRA SWP-2846
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@314116 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r313001 | alecdavis | 2011-04-07 22:19:31 +1200 (Thu, 07 Apr 2011) | 13 lines
Fix ISDN calling subaddr User Specified Odd/Even Flag
Calculation of the Odd/Even flag was wrong.
Implement correct algo, and set odd/even=0 if data would be truncated.
Only allow automatic calculation of the O/E flag, don't let dialplan influence.
(closes issue #19062)
Reported by: festr
Patches:
bug19062.diff2.txt uploaded by alecdavis (license 585)
Tested by: festr, alecdavis, rmudgett
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@313005 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r312949 | rmudgett | 2011-04-05 13:45:24 -0500 (Tue, 05 Apr 2011) | 6 lines
Crash if ISDN span layer 1 is down on initial load.
Regression from -r312575 B channel shifting during negotiation.
* Also combine updating the alarm flag with clearing the resetting flag.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@312950 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r312575 | rmudgett | 2011-04-04 11:10:50 -0500 (Mon, 04 Apr 2011) | 52 lines
Merged revisions 312574 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r312574 | rmudgett | 2011-04-04 11:00:02 -0500 (Mon, 04 Apr 2011) | 45 lines
Merged revisions 312573 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r312573 | rmudgett | 2011-04-04 10:49:30 -0500 (Mon, 04 Apr 2011) | 38 lines
Issues with ISDN calls changing B channels during call negotiations.
The handling of the PROCEEDING message was not using the correct call
structure if the B channel was changed. (The same for PROGRESS.) The call
was also not hungup if the new B channel is not provisioned or is busy.
* Made all call connection messages (SETUP_ACKNOWLEDGE, PROCEEDING,
PROGRESS, ALERTING, CONNECT, CONNECT_ACKNOWLEDGE) ensure that they are
using the correct structure and B channel. If there is any problem with
the operations then the call is now hungup with an appropriate cause code.
* Made miscellaneous messages (INFORMATION, FACILITY, NOTIFY) find the
correct structure by looking for the call and not using the channel ID.
NOTIFY is an exception with versions of libpri before v1.4.11 because a
call pointer is not available for Asterisk to use.
* Made all hangup messages (DISCONNECT, RELEASE, RELEASE_COMPLETE) find
the correct structure by looking for the call and not using the channel
ID.
(closes issue #18313)
Reported by: destiny6628
Tested by: rmudgett
JIRA SWP-2620
(closes issue #18231)
Reported by: destiny6628
Tested by: rmudgett
JIRA SWP-2924
(closes issue #18488)
Reported by: jpokorny
JIRA SWP-2929
JIRA AST-437 (The issues fixed here are most likely causing this JIRA issue.)
JIRA DAHDI-406
JIRA LIBPRI-33 (Stuck resetting flag likely fixed)
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@312579 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r311297 | rmudgett | 2011-03-17 21:59:05 -0500 (Thu, 17 Mar 2011) | 12 lines
Race condition when ISDN CallRerouting/CallDeflection invoked.
The queued AST_CONTROL_BUSY could sometimes be processed before the
call_forward dial string is recognized.
* Moved setting the call_forwarding dial string after sending a response
to the initiator and just queue an empty frame to wake up the media thread
instead of an AST_CONTROL_BUSY.
* Added check for empty rerouting/deflection number and respond with an
error.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@311298 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r309445 | rmudgett | 2011-03-04 09:22:04 -0600 (Fri, 04 Mar 2011) | 46 lines
Get real channel of a DAHDI call.
Starting with Asterisk v1.8, the DAHDI channel name format was changed for
ISDN calls to: DAHDI/i<span>/<number>[:<subaddress>]-<sequence-number>
There were several reasons that the channel name had to change.
1) Call completion requires a device state for ISDN phones. The generic
device state uses the channel name.
2) Calls do not necessarily have B channels. Calls placed on hold by an
ISDN phone do not have B channels.
3) The B channel a call initially requests may not be the B channel the
call ultimately uses. Changes to the internal implementation of the
Asterisk master channel list caused deadlock problems for chan_dahdi if it
needed to change the channel name. Chan_dahdi no longer changes the
channel name.
4) DTMF attended transfers now work with ISDN phones because the channel
name is "dialable" like the chan_sip channel names.
For various reasons, some people need to know which B channel a DAHDI call
is using.
* Added CHANNEL(dahdi_span), CHANNEL(dahdi_channel), and
CHANNEL(dahdi_type) so the dialplan can determine the B channel currently
in use by the channel. Use CHANNEL(no_media_path) to determine if the
channel even has a B channel.
* Added AMI event DAHDIChannel to associate a DAHDI channel with an
Asterisk channel so AMI applications can passively determine the B channel
currently in use. Calls with "no-media" as the DAHDIChannel do not have
an associated B channel. No-media calls are either on hold or
call-waiting.
(closes issue #17683)
Reported by: mrwho
Tested by: rmudgett
(closes issue #18603)
Reported by: arjankroon
Patches:
issue17683_18603_v1.8_v2.patch uploaded by rmudgett (license 664)
Tested by: stever28, rmudgett
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@309446 65c4cc65-6c06-0410-ace0-fbb531ad65f3
List the current mapping of DAHDI B channels to Asterisk channel names and
which calls are on hold or call-waiting. Calls on hold or call-waiting
are not associated with any B channel.
JIRA LIBPRI-27
JIRA SWP-2547
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@307964 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r307879 | rmudgett | 2011-02-15 10:13:55 -0600 (Tue, 15 Feb 2011) | 37 lines
No response sent for SIP CC subscribe/resubscribe request.
Asterisk does not send a response if we try to subscribe for call
completion after we have received a 180 Ringing. You can only subscribe
for call completion when the call has been cleared.
When we receive the 180 Ringing, for this call, its call-completion state
is 'CC_AVAILABLE'. If we then send a subscribe message to Asterisk, it
trys to change the call-completion state to 'CC_CALLER_REQUESTED'.
Because this is an invalid state change, it just ignores the message. The
only state Asterisk will accept our subscribe message is in the
'CC_CALLER_OFFERED' state.
Asterisk will go into the 'CC_CALLER_OFFERED' when the SIP client clears
the call by sending a CANCEL.
Asterisk should always send a response. Even if its a negative one.
The fix is to allow for the CCSS core to notify a CC agent that a failure
has occurred when CC is requested. The "ack" callback is replaced with a
"respond" callback. The "respond" callback has a parameter indicating
either a successful response or a specific type of failure that may need
to be communicated to the requester.
(closes issue #18336)
Reported by: GeorgeKonopacki
Tested by: mmichelson, rmudgett
JIRA SWP-2633
(closes issue #18337)
Reported by: GeorgeKonopacki
Tested by: mmichelson
JIRA SWP-2634
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@307883 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Pass a MCID request to the bridged channel so the bridged channel can send
it to the network.
The ability to send the MCID request on an ISDN span is enabled with the
new chan_dahdi.conf mcid_send option.
JIRA SWP-2845
JIRA ABE-2736
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306755 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The display ie handling can be controlled independently in the send and
receive directions with the following options:
* Block display text data.
* Use display text in SETUP/CONNECT messages for name.
* Use display text for COLP name updates (FACILITY/NOTIFY as appropriate).
* Pass arbitrary display text during a call. Sent in INFORMATION
messages. Received from any message that the display text was not used as
a name.
If the display options are not set then the options default to legacy
behavior.
The arbitrary display text is exchanged between bridged channels using the
AST_FRAME_TEXT frame type.
To send display text from the dialplan use the SendText() application when
the arbitrary display text option is enabled.
JIRA SWP-2688
JIRA ABE-2693
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306396 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r305343 | rmudgett | 2011-01-31 18:01:09 -0600 (Mon, 31 Jan 2011) | 21 lines
Merged revisions 305342 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r305342 | rmudgett | 2011-01-31 17:50:10 -0600 (Mon, 31 Jan 2011) | 14 lines
Merged revisions 305341 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r305341 | rmudgett | 2011-01-31 17:45:58 -0600 (Mon, 31 Jan 2011) | 7 lines
Obtain the pri lock for PRI queue counters.
Need to obtain the pri lock when calling pri_dump_info_str() to avoid a
reentrancy problem when calculating the Q.921 Q count statistic.
JIRA AST-484
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@305344 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r303771 | rmudgett | 2011-01-25 11:49:20 -0600 (Tue, 25 Jan 2011) | 54 lines
Merged revisions 303769 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r303769 | rmudgett | 2011-01-25 11:42:42 -0600 (Tue, 25 Jan 2011) | 47 lines
Merged revisions 303765 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r303765 | rmudgett | 2011-01-25 11:36:50 -0600 (Tue, 25 Jan 2011) | 40 lines
Sending out unnecessary PROCEEDING messages breaks overlap dialing.
Issue #16789 was a good idea. Unfortunately, it breaks overlap dialing
through Asterisk. There is not enough information available at this point
to know if dialing is complete. The ast_exists_extension(),
ast_matchmore_extension(), and ast_canmatch_extension() calls are not
adequate to detect a dial through extension pattern of "_9!".
Workaround is to use the dialplan Proceeding() application early in
non-dial through extensions.
* Effectively revert issue #16789.
* Allow outgoing overlap dialing to hear dialtone and other early media.
A PROGRESS "inband-information is now available" message is now sent after
the SETUP_ACKNOWLEDGE message for non-digital calls. An
AST_CONTROL_PROGRESS is now generated for incoming SETUP_ACKNOWLEDGE
messages for non-digital calls.
* Handling of the AST_CONTROL_CONGESTION in chan_dahdi/sig_pri was
inconsistent with the cause codes.
* Added better protection from sending out of sequence messages by
combining several flags into a single enum value representing call
progress level.
* Added diagnostic messages for deferred overlap digits handling corner
cases.
(closes issue #17085)
Reported by: shawkris
(closes issue #18509)
Reported by: wimpy
Patches:
issue18509_early_media_v1.8_v3.patch uploaded by rmudgett (license 664)
Expanded upon issue18509_early_media_v1.8_v3.patch to include analog
and SS7 because of backporting requirements.
Tested by: wimpy, rmudgett
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@303772 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r301946 | rmudgett | 2011-01-14 15:09:57 -0600 (Fri, 14 Jan 2011) | 13 lines
Deadlock between dahdi_request() and pri_dchannel() processing an incomming call.
The sig_pri_new_ast_channel() is called with the channel private lock held
when pri_dchannel() calls it and no channel private lock held when
dahdi_request() calls it. The use of pri_grab() in
sig_pri_new_ast_channel() could leave the channel private lock held when
it returns if the lock was not held before calling it.
Make sig_pri_new_ast_channel() just lock the PRI span lock instead of
using pri_grab(). It is safe to do this because dahdi_request() does not
have the channel private lock and the deadlock potential with the PRI span
lock is only between pri_dchannel() and other threads.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@301947 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r300714 | rmudgett | 2011-01-05 14:54:21 -0600 (Wed, 05 Jan 2011) | 21 lines
Merged revision 300711 from
https://origsvn.digium.com/svn/asterisk/be/branches/C.3-bier
..........
r300711 | rmudgett | 2011-01-05 13:43:55 -0600 (Wed, 05 Jan 2011) | 14 lines
A call retrieved from hold may wind up with no audio.
If the retrieved call is natively bridged then the call may not have any
audio path. The following warning message is given:
"Failed to add <dfd> to conference <chan>/<chan>: Invalid argument".
* Open the media on a B channel when pri_fixup_principle() moves the call
from a no_b_channel channel to a real channel.
* Added lock protection while pri_fixup_principle() moves a call from one
private structure to another.
* Made some pri_fixup_principle() messages more meaningful.
..........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@300716 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added the moh_signaling option to specify what to do when the channel's
bridged peer puts the ISDN channel on and off of hold.
Implemented as a FSM to control libpri ISDN signaling when the bridged
peer places the channel on and off of hold with the AST_CONTROL_HOLD and
AST_CONTROL_UNHOLD control frames.
JIRA SWP-2687
JIRA ABE-2691
Review: https://reviewboard.asterisk.org/r/1063/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@300212 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r299405 | rmudgett | 2010-12-21 20:10:39 -0600 (Tue, 21 Dec 2010) | 17 lines
Chan_dahdi sends an empty COLP on the bridged channel.
Chan_dahdi always inserts a connected party IE when you call from one
dahdi channel to another dahdi channel, even if no such information was
received on the 2nd channel. This clears the display of many phones.
* Removed leftover artifact from before the valid flag was added.
* Updated all of the channel's caller id information with the new
connected line information instead of just the string parts.
(closes issue #18508)
Reported by: wimpy
Patches:
issue18508_trunk.patch uploaded by rmudgett (license 664)
Tested by: wimpy, rmudgett
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@299406 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r298195 | rmudgett | 2010-12-13 11:11:43 -0600 (Mon, 13 Dec 2010) | 33 lines
Merged revisions 298194 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r298194 | rmudgett | 2010-12-13 11:04:41 -0600 (Mon, 13 Dec 2010) | 26 lines
Merged revisions 298193 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r298193 | rmudgett | 2010-12-13 10:56:07 -0600 (Mon, 13 Dec 2010) | 19 lines
Outgoing PRI/BRI calls cannot do DTMF triggered transfers.
Outgoing PRI/BRI calls cannot do DTMF triggered transfers if a PROCEEDING
message is not received. The debug output shows that the DTMF begin event
is seen, but the DTMF end event is missing. When the DTMF begin happens,
the call is muted so we now have one way audio (until a DTMF end event is
somehow seen).
* Made set the proceeding flag when the PRI_EVENT_ANSWER event is
received.
* Made absorb the DTMF begin and DTMF end events if we are overlap dialing
and have not seen a PROCEEDING message.
* Added a debug message when absorbing a DTMF event.
JIRA SWP-2690
JIRA ABE-2697
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@298201 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r294823 | rmudgett | 2010-11-11 20:45:22 -0600 (Thu, 11 Nov 2010) | 25 lines
Merged revisions 294822 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r294822 | rmudgett | 2010-11-11 20:44:12 -0600 (Thu, 11 Nov 2010) | 18 lines
Merged revisions 294821 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r294821 | rmudgett | 2010-11-11 20:41:13 -0600 (Thu, 11 Nov 2010) | 11 lines
Asterisk is getting a "No D-channels available!" warning message every 4 seconds.
Asterisk is just whining too much with this message: "No D-channels
available! Using Primary channel XXX as D-channel anyway!".
Filtered the message so it only comes out once if there is no D channel
available without an intervening D channel available period.
(closes issue #17270)
Reported by: jmls
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@294824 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r294349 | rmudgett | 2010-11-09 10:55:32 -0600 (Tue, 09 Nov 2010) | 17 lines
Analog lines do not transfer CONNECTED LINE or execute the interception macros.
Add connected line update for sig_analog transfers and simplify the
corresponding sig_pri and chan_misdn transfer code.
Note that if you create a three-way call in sig_analog before transferring
the call, the distinction of the caller/callee interception macros make
little sense. The interception macro writer needs to be prepared for
either caller/callee macro to be executed. The current implementation
swaps which caller/callee interception macro is executed after a three-way
call is created.
Review: https://reviewboard.asterisk.org/r/996/
JIRA ABE-2589
JIRA SWP-2372
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@294351 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r292704 | rmudgett | 2010-10-22 10:47:08 -0500 (Fri, 22 Oct 2010) | 19 lines
Connected line is not updated when chan_dahdi/sig_pri or chan_misdn transfers a call.
When a call is transfered by ECT or implicitly by disconnect in sig_pri or
implicitly by disconnect in chan_misdn, the connected line information is
not exchanged. The connected line interception macros also need to be
executed if defined.
The CALLER interception macro is executed for the held call.
The CALLEE interception macro is executed for the active/ringing call.
JIRA ABE-2589
JIRA SWP-2296
Patches:
abe_2589_c3bier.patch uploaded by rmudgett (license 664)
abe_2589_v1.8_v2.patch uploaded by rmudgett (license 664)
Review: https://reviewboard.asterisk.org/r/958/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@292705 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r292489 | rmudgett | 2010-10-20 20:02:50 -0500 (Wed, 20 Oct 2010) | 7 lines
Send CONNECT_ACKNOWLEDGE for CIS calls too.
The originator of the Q.SIG call completion signaling link was not changed
to the active state when the CONNECT message came in. The T309 processing
would immediately kill the signaling link because it was not in the active
state.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@292490 65c4cc65-6c06-0410-ace0-fbb531ad65f3