Recent changes (ASTERISK-25394 commit 2bd27d1222)
introduced the possibility of a deadlock. Due to the mentioned modifications
ast_change_hints now needs to keep both merge/delete and state callbacks from
occurring while it executes. Unfortunately, sometimes ast_change_hints can be
called with the contexts container locked. When this happens it's possible for
another thread to grab the context_merge_lock before the thread calling into
ast_change_hints does and then try to obtain the contexts container lock. This
of course causes a deadlock between the two threads. The thread calling into
ast_change_hints waits for the other thread to release context_merge_lock and
the other thread is waiting on that one to release the contexts container lock.
Unfortunately, there is not a great way to fix this problem. When hints change,
the subsequent state callbacks cannot run at the same time as a merge/delete,
nor when the usual state callbacks do. This patch alleviates the problem by
having those particular callbacks (the ones run after a hint change) occur in a
serialized task. By moving the context_merge_lock to a task it can now safely be
attempted or held without a deadlock occurring.
ASTERISK-25640 #close
Reported by: Krzysztof Trempala
Change-Id: If2210ea241afd1585dc2594c16faff84579bf302
Due to locking issues within pjnath these changes are being
reverted until pjnath can be changed.
ASTERISK-25645
Revert "res_rtp_asterisk.c: Fix DTLS negotiation delays."
This reverts commit 24ae124e4f.
Change-Id: I2986cfb2c43dc14455c1bcaf92c3804f9da49705
Revert "res_rtp_asterisk: Resolve further timing issues with DTLS negotiation"
This reverts commit 965a0eee46.
Change-Id: Ie68fafde27dad4b03cb7a1e27ce2a8502c3f7bbe
This reverts commit 0a9941de9d.
Matt,
This patch causes another problem and should not have been needed.
Before this patch, persistent_endpoint_contact_deleted_observer WAS
deleting the contact_status when ast_sip_location_delete_contact was
called. By deleting it yourself in ast_sip_location_delete_contact
it was gone before the observer could run and the observer therefore
was throwing an error and not sending stasis/AMI/statsd messages.
So, I don't think this was the cause of your original issue. I also
had verified the contact AMI and statsd lifecycle and it was working.
I'll double check now though.
ASTERISK-25675
Reported-by: Daniel Journo
Change-Id: Ib586a6b7f90acb641b0c410f659743ab90e84f1a
During failed startup of pbx_dundi no cleanup was performed. Add a call
to unload_module before returning AST_MODULE_LOAD_DECLINE.
ASTERISK-25677 #close
Change-Id: I8ffa226fda4365ee7068ac1f464473f1a4ebbb29
This change causes res_crypto to unregister CLI at shutdown while still
preventing the module from being unloaded.
ASTERISK-25673 #close
Change-Id: Ie5d57338dc2752abfc0dd05d0eec86413f2304fc
* Add new API call to get a sequence number for use in human friendly
taskprocessor names.
* Add new API call to create a taskprocessor name in a given buffer and
append a sequence number.
Change-Id: Iac458f05b45232315ed64aa31b1df05b875537a9
Update the CLI "core show taskprocessors" output format to not be
distorted because UUID names are longer than previously used taskprocessor
names.
Change-Id: I1a5c82ce3e8f765a0627796aba87f8f7be077601
The CLI "core ping taskprocessor" command does not work very
well with taskprocessor names that have spaces in them. You
have to put quotes around the name so using tab completion
becomes awkward.
Change-Id: I29e806dd0a8a0256f4e2e0a7ab88c9e19ab0eda0
The keep_alive_interval option was added about a year ago, but no
alembic revision was created to add the appropriate column to the
database.
This commit fixes the problem and adds the column. This was discovered
by running the testsuite with automatic conversion to realtime enabled.
Change-Id: If3ef92a7c4f4844d08f8aae170d2178aec5c4c1a
Renamed global declaration:tv to dummy_tv_var_for_types,
which would oltherwise cause 'shadow' warnings when 'tv'
was declared as a local variable elsewhere.
Added comment to note that dummy_tv_var_for_types is never
really exported and only used as a place holder.
ASTERISK-25627 #close
Change-Id: I9a6e17995006584f3627efe8988e3f8aa0f5dc28
A deadlock was observed where the monitor thread was stuck, therefore
resulting in no incoming SIP traffic being processed.
The problem occurred when two 200 OK responses arrived in response to a
terminating NOTIFY request sent from Asterisk. The first 200 OK was
dispatched to a threadpool worker, who locked the corresponding
transaction. The second 200 OK arrived, resulting in the monitor thread
locking the dialog. At this point, the two threads are at odds, because
the monitor thread attempts to lock the transaction, and the threadpool
thread loops attempting to try to lock the dialog.
In this case, the fix is to not have the monitor thread attempt to hold
both the dialog and transaction locks at the same time. Instead, we
release the dialog lock before attempting to lock the transaction.
There have also been some debug messages added to the process in an
attempt to make it more clear what is going on in the process.
ASTERISK-25668 #close
Reported by Mark Michelson
Change-Id: I4db0705f1403737b4360e33a8e6276805d086d4a
This resolves a reference leak caused by ASTERISK-25535. The pointer
returned by ast_format_get_codec is saved so it can be released.
ASTERISK-25664 #close
Change-Id: If9941b1bf4320b2c59056546d6bce9422726d1ec
The spandspflow2pcap.py creates pcap files from fax.log files, generated
through 'fax set debug on' when receiving a fax. An example fax.log is
included as spandspflow2pcap.log.
The sipp-sendfax.xml SIPp scenario can be used to replay that fax with a
recent version of SIPp.
ASTERISK-25660 #close
Change-Id: I4de8f28b084055b482ab8a5b28d28b605b0ed526
The macro ADD_VENDOR_CODE defined in the cel_radius.c should use the parameter
y not the address of y.
I capture the radius UDP packet via tcpdump, and the AV pairs are not correct,
then i review the source code and compare it with cdr/cdr_radius.c. Fix it and
it works.
ASTERISK-25647 #close
Reported by: Aaron An
Tested by: Aaron An
Change-Id: I72889bccd8fde120d47aa659edc0e7e6d4d019f0
This is the sixth patch in a series meant to reduce the bulk of pbx.c.
This moves hangup handler management functions to their own source.
Change-Id: Ib25a75aa57fc7d5c4294479e5cc46775912fb104
Member lastcall time is updated later than member status. There was chance to
check wrapuptime for available member with wrong (old) lastcall time.
New boolean flag "in_call" is set to true right before connecting call, and
reset to false after update of lastcall time. Members with "in_call" set to true
are treat as unavailable.
ASTERISK-19820 #close
Change-Id: I1923230cf9859ee51563a8ed420a0628b4d2e500
This is the sixth patch in a series meant to reduce the bulk of pbx.c.
This moves dialplan application management functions to their own source.
Change-Id: I444c10fb90a3cdf9f3047605d6a8aad49c22c44c
This is the fifth patch in a series meant to reduce the bulk of pbx.c.
This moves ast_switch functions to their own source.
Change-Id: Ic2592a18a5c4d8a3c2dcf9786c9a6f650a8c628e
This is the fourth patch in a series meant to reduce the bulk of pbx.c.
This moves pbx timing functions to their own source.
Change-Id: I05c45186cb11edfc901e95f6be4e6a8abf129cd6
The menuselect conflict between app_voicemail and res_mwi_external
makes it hard to package 1 version of Asterisk. There no actual
build dependencies between the 2 so moving this check to runtime
seems like a better solution.
The ast_vm_register and ast_vm_greeter_register functions in app.c
were modified to return AST_MODULE_LOAD_DECLINE instead of -1 if there
is already a voicemail module registered. The modules' load_module
functions were then modified to return DECLINE instead of -1 to the
loader. Since -1 is interpreted by the loader as AST_MODULE_LOAD_FAILURE,
the modules were incorrectly causing Asterisk to stop so this needed
to be cleaned up anyway.
Now you can build both and use modules.conf to decide which voicemail
implementation to load.
The default menuselect options still build app_voicemail and not
res_mwi_external but if both ARE built, res_mwi_external will load
first and become the voicemail provider unless modules.conf rules
prevent it. This is noted in CHANGES.
Change-Id: I7d98d4e8a3b87b8df9e51c2608f0da6ddfb89247
This is the third patch in a series meant to reduce the bulk of pbx.c.
This moves channel and global variable routines to their own source.
Change-Id: Ibe8fb4647db11598591d443a99e3f99200a56bc6
If a caller hangs up before dial is executed within an AGI then the AGI
has likely eaten all queued frames before executing the dial in DeadAGI
mode. With the caller hung up and no pending frames from the caller's
read queue, dial would not know that the call has hung up until a called
channel answers. It is rather annoying to whoever just answered the
non-existent call.
Dial should not continue execution in DeadAGI mode, hangup handlers, or
the h exten.
* Added a check early in dial to abort dialing if the caller has hungup.
ASTERISK-25307 #close
Reported by: David Cunningham
Change-Id: Icd1bc0764726ef8c809f76743ca008d0f102f418
Prior to this patch, we explicitly disallowed setting any properties on a
finalized CDR. This seemed like a good idea at the time; in practice, it was
more restrictive.
There are weird and strange scenarios where setting a property on a finalized
CDR is definitely wrong. For example, we may Fork a CDR, finalizing the
previous one, then change a property. In said case, the old CDR is supposed
to now be 'immutable' (so to speak), and should not be updated. From the
perspective of the code, a forked CDR that is finalized is just finalized.
Hence why we decided these should not be updated.
In practice, it is much more common to want to set a property on a CDR in
the h extension or in a hangup handler. Disallowing a common scenario to make
an esoteric behaviour work isn't good. This patch fixes this by allowing
callers to set a property IF we are the last CDR in the chain. This preserves
the finalized CDR if it was forked, while allowing the more common case to
function.
ASTERISK-25458 #close
Change-Id: Icf3553c607b9f561152a41e6d8381d594ccdf4b9
Prior to this patch, the CDR engine attempted to set the end time on a CDR
that was executing hangup logic and with endbeforehexten set to Yes by
calling a function that inspects the properties on the Party A snapshot to
determine if we are ready to set the end time. That always failed. This is
because a Party A snapshot is not updated for CDRs that are executing hangup
logic with endbeforehexten=Yes.
Instead of calling a function that looks at the Party A snapshot, we just
simply set the end time on the CDR. This is safe to call multiple times, and is
safe to call at this point as we know that (a) we are executing hangup logic,
and (b) we are supposed to set the end time at this point.
ASTERISK-25458
Change-Id: I0c27b493861f9c13c43addbbb21257f79047a3b3
This is the second patch in a series meant to reduce the bulk of pbx.c.
This moves custom function management routines to their own source.
Change-Id: I34a6190282f781cdbbd3ce9d3adeac3c3805e177