Resolves: #298
UserNote: The dial string option 'g' was added to the UnicastRTP channel
which enables RTP glue and therefore native RTP bridges with those
channels.
This newly introduced periodic-announce-startdelay makes it possible to
configure the initial start delay of the first periodic announcement
after which periodic-announce-frequency takes over.
UserNote: Introduce a new queue configuration option called
'periodic-announce-startdelay' which will vary the normal (historic)
behavior of starting the periodic announcement cycle at
periodic-announce-frequency seconds after entering the queue to start
the periodic announcement cycle at period-announce-startdelay seconds
after joining the queue. The default behavior if this config option is
not set remains unchanged.
Signed-off-by: Jaco Kroon <jaco@uls.co.za>
Using the Set dialplan application does not actually
delete channel or global variables. Instead the
variables are set to an empty value.
This change adds two dialplan functions,
GLOBAL_DELETE and DELETE which can be used to
delete global and channel variables instead
of just setting them to empty.
There is also no ability within the dialplan to
determine if a global or channel variable has
actually been set or not.
This change also adds two dialplan functions,
GLOBAL_EXISTS and VARIABLE_EXISTS which can be
used to determine if a global or channel variable
has been set or not.
Resolves: #289
UserNote: Four new dialplan functions have been added.
GLOBAL_DELETE and DELETE have been added which allows
the deletion of global and channel variables.
GLOBAL_EXISTS and VARIABLE_EXISTS have been added
which checks whether a global or channel variable has
been set.
All of the links that reference page anchors with capital letters in
the ids (#Something) have been changed to lower case to match the
anchors that are generated by mkdocs.
Handle session interval lower than endpoint's configured minimum timer
when sending first answer. Timer setting is checked during this step and
needs to handled appropriately.
Before this change, no response was sent at all. After this change a
response with 422 Session Interval too small is sent to UAC.
If the called party hangs up while digits are being
sent, -1 is returned to indicate so, but app_dial
was not checking the return value, resulting in
the hangup being lost and looping forever until
the caller manually hangs up the channel. We now
abort if digit sending fails.
ASTERISK-29428 #close
Resolves: #281
Add quoting around the ps_endpoints 100rel column in the ALTER
statements. Although alembic doesn't complain when generating
sql statements, postgresql does (rightly so).
Resolves: #274
* Fixed issue with the script not parsing the new tag format for
certified releases. The format changed from certified/18.9-cert5
to certified-18.9-cert5.
* Fixed issue where the asterisk version wasn't being considered
when looking for cached versions.
Resolves: #263
This adds support for Called Subscriber Held for FXS
lines, which allows users to go on hook when receiving
a call and resume the call later from another phone on
the same line, without disconnecting the call. This is
a convenience mechanism that most real PSTN telephone
switches support.
ASTERISK-30372 #close
Resolves: #240
UserNote: Called Subscriber Held is now supported for analog
FXS channels, using the calledsubscriberheld option. This allows
a station user to go on hook when receiving an incoming call
and resume from another phone on the same line by going on hook,
without disconnecting the call.
This reverts commit 617dad4cba.
apps/app_stack.c: Revert buggy gosub patch
This seems to break the case when a predial macro calls a gosub.
When the gosub calls return, the Return function outputs:
app_stack.c:423 return_exec: Return without Gosub: stack is empty
This returns -1 to the calling macro, which returns to app_dial
and causes the call to hangup instead of proceeding with the macro
that invoked the gosub.
Resolves: #253
Fixes dependency solutions in install_prereq for Debian aarch64
platforms. install_prereq was attempting to forcibly install 32-bit
armhf packages due to the aptitude search for dependencies.
Resolves: #37
If the contact_user is configured on the endpoint it will now be set on the local Contact header URI for incoming calls. The contact_user has already been set on the local Contact header URI for outgoing calls.
Resolves: #226
Added a new boolean configuration flag -
`order_multi_row_results_by_initial_column` - to both res_pgsql.conf
and res_config_odbc.conf that allows the administrator to disable the
explicit `ORDER BY` that was previously being added to all generated
SQL statements that returned multiple rows.
Fixes: #179
The documentation for PJSIP_HEADERS claims that
prefix is optional, but in the code it is actually not.
However, there is no inherent reason for this, as users
may want to retrieve all header names, not just those
beginning with a certain prefix.
This makes the prefix optional for this function,
simply fetching all header names if not specified.
As a result, the documentation is now correct.
Resolves: #230
UserNote: The prefix argument to PJSIP_HEADERS is now
optional. If not specified, all header names will be
returned.
The default is 32 with 8 being used by pjproject itself. Recent
commits have put us over the limit resulting in assertions in
pjproject. Since this value is used in invites, dialogs,
transports and subscriptions as well as the global pjproject
endpoint, we don't want to increase it too much.
Resolves: #255
In some cases I have yet to determine some stasis messages may
be created without a channel snapshot. This change adds some
tolerance to this scenario, preventing a crash from occurring.
This change adds support for refers that are not session based. It
includes a refer implementation for the PJSIP technology which results
in out-of-dialog REFERs being sent to a PJSIP endpoint. These can be
triggered using the new ARI endpoint `/endpoints/refer`.
Resolves: #71
UserNote: There is a new ARI endpoint `/endpoints/refer` for referring
an endpoint to some URI or endpoint.
Currently, if an FXS channel is still off hook when
all calls on the line have hung up, the user is provided
reorder tone until going back on hook again.
In addition to not reflecting what most commercial switches
actually do, it's very common for switches to automatically
reoriginate for the user so that dial tone is provided without
the user having to depress and release the hookswitch manually.
This can increase convenience for users.
This behavior is now supported for kewlstart FXS channels.
It's supported only for kewlstart (FXOKS) mainly because the
behavior doesn't make any sense for ground start channels,
and loop start signalling doesn't provide the necessary DAHDI
event that makes this easy to implement. Likely almost everyone
is using FXOKS over FXOLS anyways since FXOLS is pretty useless
these days.
ASTERISK-30357 #close
Resolves: #224
UserNote: The autoreoriginate setting now allows for kewlstart FXS
channels to automatically reoriginate and provide dial tone to the
user again after all calls on the line have cleared. This saves users
from having to manually hang up and pick up the receiver again before
making another call.
sig_analog allows users to flash and use the three-way dial
tone as a primitive hold function, simply by never timing
it out.
Some systems allow this dial tone to time out to silence,
so the user is not annoyed by a persistent dial tone.
This option allows the dial tone to time out normally to
silence.
ASTERISK-30004 #close
Resolves: #205
UserNote: The threewaysilenthold option now allows the three-way
dial tone to time out to silence, rather than continuing forever.
In 8d6fdf9c3a invisible bridges were
skipped but that lead to producing metrics with no name and no help.
Keep track of the number of metrics configured and then only emit these.
Add a basic testcase that verifies that there is no '(NULL)' in the
output.
ASTERISK-30474
Fixes#221
UserNote: res_pjsip now allows TLS v1.3 to be enabled if supported by
the underlying PJSIP library. The bundled version of PJSIP supports
TLS v1.3.
c3ff4648 removed the [iaxtel700] context but neglected to remove
references to it.
This commit addresses that and also removes iaxtel and freeworlddialup
references from other config files.
The app_queue module provides both an AMI action and a CLI command
to change the priority of a caller in a queue. Up to now this change
of priority has only been reflected to new callers into the queue.
This change adds an "immediate" option to both the AMI action and
CLI command which immediately applies the priority change respective
to the other callers already in the queue. This can allow, for example,
a caller to be placed at the head of the queue immediately if their
priority is sufficient.
Resolves: #202
UserNote: The 'queue priority caller' CLI command and
'QueueChangePriorityCaller' AMI action now have an 'immediate'
argument which allows the caller priority change to be reflected
immediately, causing the position of a caller to move within the
queue depending on the priorities of the other callers.
The ast_app_getdata() and ast_app_getdata_terminator() declarations
in app.h were changed recently to return enum ast_getdata_result
(which is how they were defined in app.c). The existing
declaration of ast_getdata_result in app.h was about 1000 lines
after those functions however so under certain circumstances,
a "use before declaration" error was thrown by the compiler.
The declaration of the enum was therefore moved to before those
functions.
Resolves: #200
A change made in 82cebaa0 did not properly handle the case when a
channel was not provided, triggering a crash. ast_check_hangup(...)
does not protect against NULL pointers.
Fixes#180
in a particular mailbox folder. The forward command can be used
to copy a message within a mailbox or to another mailbox. Also adds
a VoicemailBoxSummarry, required to retrieve message ID's.
Resolves: #181
UserNote: The following manager actions have been added
VoicemailBoxSummary - Generate message list for a given mailbox
VoicemailRemove - Remove a message from a mailbox folder
VoicemailMove - Move a message from one folder to another within a mailbox
VoicemailForward - Copy a message from one folder in one mailbox
to another folder in another or the same mailbox.
Adds CLI commands to allow move/remove/forward individual messages
from a particular mailbox folder. The forward command can be used
to copy a message within a mailbox or to another mailbox. Also adds
a show mailbox, required to retrieve message ID's.
Resolves: #170
UserNote: The following CLI commands have been added to app_voicemail
voicemail show mailbox <mailbox> <context>
Show contents of mailbox <mailbox>@<context>
voicemail remove <mailbox> <context> <from_folder> <messageid>
Remove message <messageid> from <from_folder> in mailbox <mailbox>@<context>
voicemail move <mailbox> <context> <from_folder> <messageid> <to_folder>
Move message <messageid> in mailbox <mailbox>&<context> from <from_folder> to <to_folder>
voicemail forward <from_mailbox> <from_context> <from_folder> <messageid> <to_mailbox> <to_context> <to_folder>
Forward message <messageid> in mailbox <mailbox>@<context> <from_folder> to
mailbox <mailbox>@<context> <to_folder>
From the gdb information, it was found that when calling __ast_free, the size of the
allocated space pointed to by the pointer matches the size created when rtp->themssrc_valid
is equal to 0. However, in reality, when reading the value of rtp->themssrc_valid in gdb,
it is found to be 1.
Within ast_rtcp_write(), the call to ast_rtp_rtcp_report_alloc() uses rtp->themssrc_valid,
which is outside the protection of the rtp_instance lock. However,
ast_rtcp_generate_report(), which is called by ast_rtcp_generate_compound_prefix(), uses
rtp->themssrc_valid within the protection of the rtp_instance lock.
This can lead to the possibility that the value of rtp->themssrc_valid used in the call to
ast_rtp_rtcp_report_alloc() may be different from the value of rtp->themssrc_valid used
within ast_rtcp_generate_report().
Resolves: asterisk#63
This deprecates the users.conf config file, which
is no longer as widely supported but still integrated
with a number of different modules.
Because there is no real mechanism for marking a
configuration file as "deprecated", and users.conf
is not just used in a single place, this now emits
a warning to the user when the PBX loads to notify
about the deprecation.
This configuration mechanism has been widely criticized
and discouraged since its inception, and is no longer
relevant to the configuration that most users are doing
today. Removing it will allow for some simplification
and cleanup in the codebase.
Resolves: #183
UpgradeNote: The users.conf config is now deprecated
and will be removed in a future version of Asterisk.
In PROpenedOrUpdated, the cherry-pick reminder will now be
suppressed if there are already valid 'cherry-pick-to' comments
in the PR or the PR contained a 'cherry-pick-to: none' comment.
When immediate=yes on an FXS channel, sig_analog will
start fake audible ringback that continues until the
channel is answered. Even if it answers immediately,
the ringback is still audible for a brief moment.
This can be disruptive and unwanted behavior.
This adds an option to disable this behavior, though
the default behavior remains unchanged.
ASTERISK-30003 #close
Resolves: #118
UserNote: The immediatering option can now be set to no to suppress
the fake audible ringback provided when immediate=yes on FXS channels.
This accomplishes the same thing as a `find ... | sort` but with the
added benefit of clarity and avoiding a call to a subshell.
Additionally drop the -s option from call to patch as it is not POSIX.
The apply_patches script wasn't sorting the list of patches in
the "patches" directory before applying them. This left the list
in an indeterminate order. In most cases, the list is actually
sorted but rarely, they can be out of order and cause dependent
patches to fail to apply.
We now sort the list but the "sort" program wasn't in the
configure scripts so we needed to add that and regenerate
the scripts as well.
Resolves: #193
Maximilian Fridrich
Jaco Kroon
Joshua C. Colp
George Joseph
Bastian Triller
Naveen Albert
Mike Bradeen
zhengsh
Matthew Fredrickson
Jason D. McCormick
MikeNaso
Sean Bright
Holger Hans Peter Freyther
phoneben
Stanislav Abramenkov