This reverts commit 29115e2384.
That commit closed a long standing hole which allowed subscriptions
to mailboxes that weren't configured in voicemail.conf. This
caused an issue with FreePBX which depdended on that behavior.
The commit is being reverted until FreePBX can handle the new
behavior.
ASTERISK-28151
Reported by: Ronald Raikes
Change-Id: I57b7b85e75d7dd97c742b5c69d718a0f61260c15
* The bridging core no longer uses the stasis cache for bridge
snapshots. The latest bridge snapshot is now stored on the
ast_bridge structure itself.
* The following APIs are no longer available since the stasis cache
is no longer used:
ast_bridge_topic_cached()
ast_bridge_topic_all_cached()
* A topic pool is now used for individual bridge topics.
* The ast_bridge_cache() function was removed since there's no
longer a separate container of snapshots.
* A new function "ast_bridges()" was created to retrieve the
container of all bridges. Users formerly calling
ast_bridge_cache() can use the new function to iterate over
bridges and retrieve the latest snapshot directly from the
bridge.
* The ast_bridge_snapshot_get_latest() function was renamed to
ast_bridge_get_snapshot_by_uniqueid().
* A new function "ast_bridge_get_snapshot()" was created to retrieve
the bridge snapshot directly from the bridge structure.
* The ast_bridge_topic_all() function now returns a normal topic
not a cached one so you can't use stasis cache functions on it
either.
* The ast_bridge_snapshot_type() stasis message now has the
ast_bridge_snapshot_update structure as it's data. It contains
the last snapshot and the new one.
* cdr, cel, manager and ari have been updated to use the new
arrangement.
Change-Id: I7049b80efa88676ce5c4666f818fa18ad1985369
When a channel snapshot was created it used to be done
from scratch, copying all data (many strings). This incurs
a cost when doing so.
This change segments the channel snapshot into different
components which can be reused if unchanged from the
previous snapshot creation, reducing the cost. In normal
cases this results in some pointers being copied with
reference count being bumped, some integers being set,
and a string or two copied. The other benefit is that it
is now possible to determine if a channel snapshot update
is redundant and thus stop it before a message is published
to stasis.
The specific segments in the channel snapshot were split up
based on whether they are changed together, how often they
are changed, and their general grouping. In practice only
1 (or 0) of the segments actually get changed in normal
operation.
Invalidation is done by setting a flag on the channel when
the segment source is changed, forcing creation of a new
segment when the channel snapshot is created.
ASTERISK-28119
Change-Id: I5d7ef3df963a88ac47bc187d73c5225c315f8423
Channels no longer use the Stasis cache for channel snapshots. Instead
they are stored in a hash table in stasis_channels which reduces the
number of Stasis messages created and allows better storage.
As a result the following APIs are no longer available since the stasis
cache is no longer used:
ast_channel_topic_cached()
ast_channel_topic_all_cached()
The ast_channel_cache_all() and ast_channel_cache_by_name() functions
now return an ao2_container of ast_channel_snapshots rather than
a container of stasis_messages therefore you can't (and don't need
to) call stasis_cache functions on it.
The ast_channel_topic_all() function now returns a normal topic not
a cached one so you can't use stasis cache functions on it either.
The ast_channel_snapshot_type() stasis message now has the
ast_channel_snapshot_update structure as it's data. It contains the
last snapshot and the new one.
ast_channel_snapshot_get_latest() still returns the latest snapshot.
The latest snapshot is now stored on the channel itself to eliminate
cache hits when Stasis messages that have the snapshot as a payload
are created.
ASTERISK-28102
Change-Id: I9334febff60a82d7c39703e49059fa3a68825786
Replace usage of ao2_container_alloc with ao2_container_alloc_hash or
ao2_container_alloc_list. Remove ao2_container_alloc macro.
Change-Id: I0907d78bc66efc775672df37c8faad00f2f6c088
This replaces the inline functions with macros. This removes the need
to directly use __ao2_ref, opts instead for standard ao2_bump and
ao2_cleanup macros.
Change-Id: If4e04e9bab2e3c883188437cb9f487b3e498a21b
This change adds the ability for subscriptions to indicate
which message types they are interested in accepting. By
doing so the filtering is done before being dispatched
to the subscriber, reducing the amount of work that has
to be done.
This is optional and if a subscriber does not add
message types they wish to accept and set the subscription
to selective filtering the previous behavior is preserved
and they receive all messages.
There is also the ability to explicitly force the reception
of all messages for cases such as AMI or ARI where a large
number of messages are expected that are then generically
converted into a different format.
ASTERISK-28103
Change-Id: I99bee23895baa0a117985d51683f7963b77aa190
The 'I' option currently blocks initial CONNECTEDLINE or REDIRECTING updates
from the called parties to the caller.
This patch also blocks updates in the other direction before call is
answered.
ASTERISK-27980
Change-Id: I6ce9e151a2220ce9e95aa66666933cfb9e2a4a01
Adding the "label" attribute used for participant info correlation
was previously done in app_confbridge but it wasn't working
correctly because it didn't have knowledge about which video
streams belonged to which channel. Only bridge_softmix has that
data so now it's set when the bridge topology is changed.
ASTERISK-28107
Change-Id: Ieddeca5799d710cad083af3fcc3e677fa2a2a499
* Update the post-answer documentation and example. The Dial example was
incorrect and misleading for the post-answer subroutine useage.
* Fix note and warning paragraphs in option descriptions. They don't show
up in the wiki.
Change-Id: I81019a1fd75d5b9151f76b52c38e2a90da682d14
Add attribute_warn_unused_result to ast_taskprocessor_push,
ast_taskprocessor_push_local and ast_threadpool_push. This will help
ensure we perform the necessary cleanup upon failure.
Change-Id: I7e4079bd7b21cfe52fb431ea79e41314520c3f6d
Declining the queue_member_status_type stasis message in stasis.conf
causes these messages to leak json objects.
* Add missing ast_json_unref() if the type is NULL in
queue_publish_member_blob().
ASTERISK-28084
Change-Id: I691ecf49bd1f7d9c29182e1eee8c4bb7103be9fc
The first attempt at publishing confbridge events to participants
involved publishing them at the same time stasis events were
created. This caused issues with bridge and channel locks. The
second attempt involved publishing them when the stasis events
were received by the code that published the confbridge AMI events.
This caused timing issues because, depending on resources available,
the event could be received before channels actually joined the
bridge and would therefore fail to send messages to the participant.
This attempt reverts to the original mechanism with one exception.
The join and leave events are published via bridge join and leave
hooks. This guarantees the states of the channels and bridge and
provides deterministic timing for event publishing.
Change-Id: I2660074f8a30a5224cb953d5e047ee84484a9036
This issue related to setting of holdtime, announcements, member delays.
It works well if we set the member delays to "0" and no announcements
and no holdtime.This issue will happen if we set member delays to "1",
"2"... or announcements or holdtime and hangs up the call during
processing it.
And here is the reason:
(At the step of answering a phone.)
It takes care any holdtime, announcements, member delays,
or other options after a call has been answered if it exists.
Normally, After the call has been aswered,
and we wait for the processing one of the cases of the member delays
or hold time or announcements finished, "if (ast_check_hangup(peer))"
will be not executed, then queue will be updated at update_queue().
Here, pending member will be removed.
However, after the call has been aswered,
if we hangs up the call during one of the cases of the member delays
or hold time or announcements, "if (ast_check_hangup(peer))"
will be executed.
outgoing = NULL and at hangupcalls, pending members will not be removed.
* This fixed patch will remove the pending member from container
before hanging up the call with outgoing is NULL.
ASTERISK-27920
Reported by: Cao Minh Hiep
Tested by: Cao Minh Hiep
Change-Id: Ib780fbf48ace9d2d8eaa1270b9d530a4fc14c855
app_voicemail wasn't properly cleaning up the stasis cache or the
mwi topic pool when the module was unloaded or when a user was
deleted as a result of a reload. This resulted in leaks in both
areas.
* app_voicemail now calls ast_delete_mwi_state_full when it frees
a user structure and ast_delete_mwi_state_full in turn now calls
the new stasis_topic_pool_delete_topic function to clear the topic
from the pool.
Change-Id: Ide23144a4a810e7e0faad5a8e988d15947965df8
The append_mailbox function wasn't calculating the correct length
to pass to ast_alloca and it wasn't handling the case where context
might be empty.
Found by the Address Sanitizer.
Change-Id: I7eb51c7bd18a7a8dbdba261462a95cc69e84f161
app_voicemail was using the stasis cache to build and maintain a
list of mailboxes that had subscribers. It then used this list
to determine if a mailbox should be polled for new messages if
polling was enabled. For this to work, stasis had to cache every
subscription and unsubscription to the mailbox which caused a lot of
overhead, both cpu and memory related.
Since polling is only required when changes are being made to
mailboxes outside of app_voicemail and since the number of mailboxes
that don't have any subscribers is likely to be very low, all
mailboxes are now polled instead of just the ones with subscribers.
This paves the way for disabling the caching of stasis subscription
change messages.
Also fixed cleanup in some of the unit tests that not only left
test users in the users list but also caused segfaults if the tests
were run more than once.
ASTERISK-27121
Change-Id: I5cceb737246949f9782955c64425b8bd25a9e9ee
I'm only seeing an error in 14+, so I assume it is due to different
compiler options:
app_queue.c: In function ‘handle_queue_add_member’:
app_queue.c:10234:19: error: ‘%d’ directive writing between 1 and 11
bytes into a region of size 3 [-Werror=format-overflow=]
sprintf(num, "%d", state);
^~
app_queue.c:10234:18: note: directive argument in the range
[-2147483648, 99]
sprintf(num, "%d", state);
^~~~
Compiler: gcc version 8.0.1 20180414 (experimental)
[trunk revision 259383] (Ubuntu 8-20180414-1ubuntu2)
Change-Id: I18577590da46829c1ea7d8b82e41d69f105baa10
When a call leaves a queue on leaveempty condition, QUEUESTATUS
must be set to LEAVEEMPTY, no matter whether Queue was executed with or
without the "c" (continue) option.
The regression was introduced in the fix for ASTERISK_25665.
The following fix (ASTERISK_27065) was incomplete, as QUEUESTATUS was
overwritten in case when "c" is set, regardless of what was the cause
for leaving the queue.
ASTERISK-27973 #close
Reported-by: Valentin Safonov
Change-Id: Iec013fe6a26a4e825ca572a1dda4f3cee5f6f80c
I have removed the STATIC_BUILD option immediately as it has not
been maintained in many years and is non-functional.
ASTERISK-27965
Change-Id: I64783d017b86dba9ee3c7bcfb97e59889a3f76d7
Previously, the msid "label" attribute was used to correlate
participant info but because streams could be reused, the msid
wasn't being updated correctly when someone left the bridge and
another joined.
Now, instead of looking for the msid attribute on a channel's streams,
app_confbridge sets an "SDP:LABEL" attribute on the stream which
res_pjsip_sdp_rtp looks for. If it finds it, it adds a "label"
attribute to the current sdp.
Change-Id: I6cbaa87fb59a2e0688d956e72d2d09e4ac20d5a5
If a conference is ended very quickly after it was created (i.e., the
first user immediately hangs up) then the conference bridge and announcer
channels are not removed.
When a conference is created, the push_announcer() function is added to
the playback queue task processor and the conference object reference is
bumped. If a conference is ended while the push_announcer() function is
still going then the ao2_cleanup(conference) at the end of
push_announcer() will call the destructor function -
destroy_conference_bridge().
The destroy_conference_bridge() function will then add the
hangup_playback() task to the playback queue and will wait for it to end.
Since it is already a current task of the playback queue it will wait
forever.
This patch makes the conference thread call push_announcer() directly.
This way the conference object reference bump is not needed. Since the
playback queue task processor is only used by the conference thread
itself, there is no danger of trying to play announcements before the
announcer is pushed to the bridge.
ASTERISK-27870 #close
Change-Id: I947a50fb121422d90fd1816d643a54d75185a477
With the participant info code in app_confbridge, we were still
in the process of adding the channel to the bridge when trying to send
an in-dialog MESSAGE. This caused 2 threads to grab the channel
blocking flag at the same time. To mitigate this, the participant
info code was moved to confbridge_manager so it runs after all
channel/bridge actions have finished.
Change-Id: I228806ac153074f45e0b35d5236166e92e132abd
Add predial handler support to app_queue. app_dial (ASTERISK_19548) and
app_originate (ASTERISK_26587) have the ability to execute predial
handlers on caller and callee channels. This patch adds predial handlers
to app_queue and uses the same options as Dial and Originate (b and B).
The caller routine gets executed when the caller first enters the queue.
The callee routine gets executed for each queue member when they are about
to be called.
ASTERISK-27912
Change-Id: I5acf5c32587ee008658d12e8a8049eb8fa4d0f24
There can be one and only one thread handling a channel's media at a time.
Otherwise, we don't know which thread is going to handle the media frames.
ASTERISK-27625
Change-Id: Ia341f1a6f4d54f2022261abec9021fe5b2eb4905
This patch changes the way asterisk polls output from mpg123, instead
of waiting for 10 seconds(when playing an http url) it now uses a
timeout of one second and iterates 10 times using this same timeout.
The main difference is that for every timeout asterisk receives it now
checks if mpg123 is still running before poll again.
ASTERISK-27752
Change-Id: Ib7df8462e3e380cb328011890ad9270d9e9b4620
ConfBridge can now send events to participants via in-dialog MESSAGEs.
All current Confbridge events are supported, such as ConfbridgeJoin,
ConfbridgeLeave, etc. In addition to those events, a new event
ConfbridgeWelcome has been added that will send a list of all
current participants to a new participant.
For all but the ConfbridgeWelcome event, the JSON message contains
information about the bridge, such as its id and name, and information
about the channel that triggered the event such as channel name,
callerid info, mute status, and the MSID labels for their audio and
video tracks. You can use the labels to correlate callerid and mute
status to specific video elements in a webrtc client.
To control this behavior, the following options have been added to
confbridge.conf:
bridge_profile/enable_events: This must be enabled on any bridge where
events are desired.
user_profile/send_events: This must be set for a user profile to send
events. Different user profiles connected to the same bridge can have
different settings. This allows admins to get events but not normal
users for instance.
user_profile/echo_events: In some cases, you might not want the user
triggering the event to get the event sent back to them. To prevent it,
set this to false.
A change was also made to res_pjsip_sdp_rtp to save the generated msid
to the stream so it can be re-used. This allows participant A's video
stream to appear as the same label to all other participants.
Change-Id: I26420aa9f101f0b2387dc9e2fd10733197f1318e
There was no real reason to limit the conteny type to text/plain other
than that's what it was limited to before. Now any text/* content
type will be allowed for channel drivers that don't support enhanced
messaging and any type will be allowed for channel drivers that do
support enhanced messaging.
Change-Id: I94a90cfee98b4bc8e22aa5c0b6afb7b862f979d9
When an AMI client connects, it cannot determine if a user was talking
prior to a transition in the user speaking state (which would generate
a ConfbridgeTalking event). This patch causes app_confbridge to track the
talking state and make this state available via ConfBridgeList.
ASTERISK-27877 #close
Change-Id: I19b5284f34966c3fda94f5b99a7e40e6b89767c6
The MeetmeJoin, MeetmeLeave, MeetmeEnd, MeetmeMute, MeetmeTalking, and
MeetmeTalkRequest AMI events were documented with sending out a Usernum
header when the User header was actually output.
* Change the online documentation to match reality.
ASTERISK-27873
ASTERISK-25261
Change-Id: I437bc70618d07c183c9624b7069c2fcae7f17a39
Fix data-type mismatch between app_voicemail and database columns
exposed by new version of MariaDB
ASTERISK-27760
Change-Id: I8543ad480a08c98be78bde1ee870e6e6c84b2c5b
Correct the log warning message shown when ODBC voicemail
retrieve_file is called and there is a null value in the category
column.
A more meaningfull message is now written at debug level.
ASTERISK-27853
Change-Id: Ic36e97d5eb070a23a12ba45972f6b53e2182a3f4
lvl
George Joseph
Joshua Colp
Corey Farrell
Alexei Gradinari
Richard Mudgett
Cao Minh Hiep
Rodrigo Ramírez Norambuena
Sean Bright
Ivan Poddubny
Robert Mordec
Kristian F. Høgh
Jenkins2
Sam Wierema
William McCall
Nic Colledge