The current AST_CEL_LOCAL_OPTIMIZE event is and has been
triggered on a local optimization end to serve as a flag
indicating the event occurred. This change adds a second
AST_CEL_LOCAL_OPTIMIZE_BEGIN event for further detail.
Resolves: #52
UpgradeNote: The existing AST_CEL_LOCAL_OPTIMIZE can continue
to be used as-is and the AST_CEL_LOCAL_OPTIMIZE_BEGIN event
can be ignored if desired.
UserNote: The new AST_CEL_LOCAL_OPTIMIZE_BEGIN can be used
by itself or in conert with the existing
AST_CEL_LOCAL_OPTIMIZE to book-end local channel optimizaion.
(cherry picked from commit 8d3d8fcdcd)
* Remove .gitreview and switch to pulling the main asterisk branch
version from configure.ac instead.
* Replace references to JIRA with GitHub.
* Other minor cleanup found along the way.
Resolves: #39
(cherry picked from commit 5c6d5ea38f)
When using mediasec, requests sent after a 401 must still contain the
Security-Client header according to
draft-dawes-sipcore-mediasec-parameter.
Resolves: #48
(cherry picked from commit f3cc1e7fbd)
The current STIR/SHAKEN signing process is inconsistent with the
RFCs in a couple ways that can cause interoperability issues.
RFC8225 specifies that the keys must be ordered lexicographically, but
currently the fields are simply ordered according to the order
in which they were added to the JSON object, which is not
compliant with the RFC and can cause issues with some carriers.
To fix this, we now leverage libjansson's ability to dump a JSON
object sorted by key value, yielding the correct field ordering.
Additionally, telephone numbers must have any leading + prefix removed
and must not contain characters outside of 0-9, *, and # in order
to comply with the RFCs. Numbers are now properly formatted as such.
ASTERISK-30407 #close
Change-Id: Iab76d39447c4b8cf133de85657dba02fda07f9a2
(cherry picked from commit 66a7cff57e)
Adds PJSIP as a supported technology to DUNDi.
To facilitate this, we now allow an endpoint to be specified
for outgoing PJSIP calls. We also allow users to force a specific
channel technology for outgoing SIP-protocol calls.
ASTERISK-28109 #close
ASTERISK-28233 #close
Change-Id: I2e28e5a5d007bd49e3df113ad567b011103899bf
(cherry picked from commit b33f92cbb5)
While it is possible to create multiple mixmonitor instances
on a channel, it was not previously possible to mute individual
instances.
This change includes the ability to specify the MixMonitorID
when calling the manager action: MixMonitorMute. This will
allow an individual MixMonitor instance to be muted via id.
This id can be stored as a channel variable using the 'i'
MixMonitor option.
As part of this change, if no MixMonitorID is specified in
the manager action MixMonitorMute, Asterisk will set the mute
flag on all MixMonitor spy-type audiohooks on the channel.
This is done via the new audiohook function:
ast_audiohook_set_mute_all.
ASTERISK-30464
Change-Id: Ibba8c7e750577aa1595a24b23316ef445245be98
(cherry picked from commit fa635a872e)
* Added a new function ast_utf8_replace_invalid_chars() to
utf8.c that copies a string replacing any invalid UTF-8
sequences with the Unicode specified U+FFFD replacement
character. For example: "abc\xffdef" becomes "abc\uFFFDdef".
Any UTF-8 compliant implementation will show that character
as a � character.
* Updated res_pjsip:set_id_from_hdr() to use
ast_utf8_replace_invalid_chars and print a warning if any
invalid sequences were found during the copy.
* Updated stasis_channels:ast_channel_publish_varset to use
ast_utf8_replace_invalid_chars and print a warning if any
invalid sequences were found during the copy.
ASTERISK-27830
Change-Id: I4ffbdb19c80bf0efc675d40078a3ca4f85c567d8
Removed multiple patches.
Code chages in res_pjsip_pubsub due to changes in evsub.
Pjsip now calls on_evsub_state() before on_rx_refresh(),
so the sub tree deletion that used to take place in
on_evsub_state() now must take place in on_rx_refresh().
Additionally, pjsip now requires that you send the NOTIFY
from within on_rx_refresh(), otherwise it will assert
when going to send the 200 OK. The idea is that it will
look for this NOTIFY and cache it until after sending the
response in order to deal with the self-imposed message
mis-order. Asterisk previously dealt with this by pushing
the NOTIFY in on_rx_refresh(), but pjsip now forces us
to use it's method.
Changes were required to configure in order to detect
which way pjsip handles this as the two are not
compatible for the reasons mentioned above.
A corresponding change in testsuite is required in order
to deal with the small interal timing changes caused by
moving the NOTIFY send.
ASTERISK-30325
Change-Id: I50b00cac89d950d3511d7b250a1c641965d9fe7f
Adds the overlap_context option, which can be used
to explicitly specify a context to use for overlap
dialing extension matches, rather than forcibly
using the context configured for the endpoint.
ASTERISK-30262 #close
Change-Id: Ibbcd4a8b11402428a187fb56b8d4e7408774a0db
Add ability to set HANGUPCAUSE when SIP causecode received in BYE (in addition to currently supported Q.850).
ASTERISK-30319 #close
Change-Id: I3f55622dc680ce713a2ffb5a458ef5dd39fcf645
-----------------
This commit reinstates MES with some casting fixes to the
functions in time.h that convert between doubles and timeval
structures. The casting issues were causing incorrect
timestamps to be calculated which caused transcoding from/to
G722 to produce bad or no audio.
ASTERISK-30391
-----------------
This module has been updated to provide additional
quality statistics in the form of an Asterisk
Media Experience Score. The score is avilable using
the same mechanisms you'd use to retrieve jitter, loss,
and rtt statistics. For more information about the
score and how to retrieve it, see
https://wiki.asterisk.org/wiki/display/AST/Media+Experience+Score
* Updated chan_pjsip to set quality channel variables when a
call ends.
* Updated channels/pjsip/dialplan_functions.c to add the ability
to retrieve the MES along with the existing rtcp stats when
using the CHANNEL dialplan function.
* Added the ast_debug_rtp_is_allowed and ast_debug_rtcp_is_allowed
checks for debugging purposes.
* Added several function to time.h for manipulating time-in-samples
and times represented as double seconds.
* Updated rtp_engine.c to pass through the MES when stats are
requested. Also debug output that dumps the stats when an
rtp instance is destroyed.
* Updated res_rtp_asterisk.c to implement the calculation of the
MES. In the process, also had to update the calculation of
jitter. Many debugging statements were also changed to be
more informative.
* Added a unit test for internal testing. The test should not be
run during normal operation and is disabled by default.
Change-Id: I4fce265965e68c3fdfeca55e614371ee69c65038
json.h contains macros to get a string and an integer
from a JSON object. However, the macro to do this for
JSON reals is missing. This adds that.
ASTERISK-30361 #close
Change-Id: I8d0e28d763febf27b05801cdc83b73282aa6ee7a
This module has been updated to provide additional
quality statistics in the form of an Asterisk
Media Experience Score. The score is avilable using
the same mechanisms you'd use to retrieve jitter, loss,
and rtt statistics. For more information about the
score and how to retrieve it, see
https://wiki.asterisk.org/wiki/display/AST/Media+Experience+Score
* Updated chan_pjsip to set quality channel variables when a
call ends.
* Updated channels/pjsip/dialplan_functions.c to add the ability
to retrieve the MES along with the existing rtcp stats when
using the CHANNEL dialplan function.
* Added the ast_debug_rtp_is_allowed and ast_debug_rtcp_is_allowed
checks for debugging purposes.
* Added several function to time.h for manipulating time-in-samples
and times represented as double seconds.
* Updated rtp_engine.c to pass through the MES when stats are
requested. Also debug output that dumps the stats when an
rtp instance is destroyed.
* Updated res_rtp_asterisk.c to implement the calculation of the
MES. In the process, also had to update the calculation of
jitter. Many debugging statements were also changed to be
more informative.
* Added a unit test for internal testing. The test should not be
run during normal operation and is disabled by default.
ASTERISK-30280
Change-Id: I458cb9a311e8e5dc1db769b8babbcf2e093f107a
Currently, there is no Caller ID available to us when
checking for an extension match when handling INVITEs.
As a result, extension patterns that depend on the Caller ID
are not matched and calls may be incorrectly rejected.
The Caller ID is not available because the supplement that
adds Caller ID to the session does not execute until after
this check. Supplement callbacks cannot yet be executed
at this point since the session is not yet in the appropriate
state.
To fix this without impacting existing behavior, the Caller ID
number is now retrieved before attempting to pattern match.
This ensures pattern matching works correctly and there is
no behavior change to the way supplements are called.
ASTERISK-28767 #close
Change-Id: Iec7f5a3b90e51b65ccf74342f96bf80314b7cfc7
When ast_stream_and_wait returns an error (for example, when attempting
to stream to a channel after hangup) the stream is not closed, and
callers typically do not check the return code. This results in leaking
file descriptors, leading to resource exhaustion.
This change ensures that the stream is closed in case of error.
ASTERISK-30198 #close
Reported-by: Julien Alie
Change-Id: Ie46b67314590ad75154595a3d34d461060b2e803
chan_sip supported sending AOC-D and AOC-E information in SIP INFO
messages in an "AOC" header in a format that was originally defined by
Snom. In the meantime, ETSI TS 124 647 introduced an XML-based AOC
format that is supported by devices from multiple vendors, including
Snom phones with firmware >= 8.4.2 (released in 2010).
This commit adds a new res_pjsip_aoc module that inserts AOC information
into outgoing messages or sends SIP INFO messages as described below.
It also fixes a small issue in res_pjsip_session which didn't always
call session supplements on outgoing_response.
* AOC-S in the 180/183/200 responses to an INVITE request
* AOC-S in SIP INFO (if a 200 response has already been sent or if the
INVITE was sent by Asterisk)
* AOC-D in SIP INFO
* AOC-D in the 200 response to a BYE request (if the client hangs up)
* AOC-D in a BYE request (if Asterisk hangs up)
* AOC-E in the 200 response to a BYE request (if the client hangs up)
* AOC-E in a BYE request (if Asterisk hangs up)
The specification defines one more, AOC-S in an INVITE request, which
is not implemented here because it is not currently possible in
Asterisk to have AOC data ready at this point in call setup. Once
specifying AOC-S via the dialplan or passing it through from another
SIP channel's INVITE is possible, that might be added.
The SIP INFO requests are sent out immediately when the AOC indication
is received. The others are inserted into an appropriate outgoing
message whenever that is ready to be sent. In the latter case, the XML
is stored in a channel variable at the time the AOC indication is
received. Depending on where the AOC indications are coming from (e.g.
PRI or AMI), it may not always be possible to guarantee that the AOC-E
is available in time for the BYE.
Successfully tested AOC-D and both variants of AOC-E with a Snom D735
running firmware 10.1.127.10. It does not appear to properly support
AOC-S however, so that could only be tested by inspecting SIP traces.
ASTERISK-21502 #close
Reported-by: Matt Jordan <mjordan@digium.com>
Change-Id: Iebb7ad0d5f88526bc6629d3a1f9f11665434d333
This file includes some doxygen comments referencing
ast_format_set. This is an obsolete API that was
removed years back, but documentation was not fully
updated to reflect that. These examples are
updated to the current way of doing things
(using the format cache).
ASTERISK-30327 #close
Change-Id: I570f3b8007fa17ba470cc7117f44bfe7c555d2f7
It was possible for a module that registered for transport monitor
events to pass in a pjsip_transport that had already been freed.
This caused pjsip_transport_events to crash when looking up the
monitor for the transport. The fix is a two pronged approach.
1. We now increment the reference count on pjsip_transports when we
create monitors for them, then decrement the count when the
transport is going to be destroyed.
2. There are now APIs to register and unregister monitor callbacks
by "transport key" which is a string concatenation of the remote ip
address and port. This way the module needing to monitor the
transport doesn't have to hold on to the transport object itself to
unregister. It just has to save the transport_key.
* Added the pjsip_transport reference increment and decrement.
* Changed the internal transport monitor container key from the
transport->obj_name (which may not be unique anyway) to the
transport_key.
* Added a helper macro AST_SIP_MAKE_REMOTE_IPADDR_PORT_STR() that
fills a buffer with the transport_key using a passed-in
pjsip_transport.
* Added the following functions:
ast_sip_transport_monitor_register_key
ast_sip_transport_monitor_register_replace_key
ast_sip_transport_monitor_unregister_key
and marked their non-key counterparts as deprecated.
* Updated res_pjsip_pubsub and res_pjsip_outbound_register to use
the new "key" monitor functions.
NOTE: res_pjsip_registrar also uses the transport monitor
functionality but doesn't have a persistent object other than
contact to store a transport key. At this time, it continues to
use the non-key monitor functions.
ASTERISK-30244
Change-Id: I1a20baf2a8643c272dcf819871d6c395f148f00b
Add live_dangerously flag to manager and use this flag to
determine if a configuation file outside of AST_CONFIG_DIR
should be read.
ASTERISK-30176
Change-Id: I46b26af4047433b49ae5c8a85cb8cda806a07404
Currently chan_pjsip on receiving a re-INVITE without SDP will only
return the codecs that are previously negotiated and not offering
all enabled codecs.
This causes interoperability issues with different equipment (e.g.
from Cisco) for some of our customers and probably also in other
scenarios involving 3PCC infrastructure.
According to RFC 3261, section 14.2 we SHOULD return all codecs
on a re-INVITE without SDP
The PR proposes a new parameter to configure this behaviour:
all_codecs_on_empty_reinvite. It includes the code, documentation,
alembic migrations, CHANGES file and example configuration additions.
ASTERISK-30193 #close
Change-Id: I69763708d5039d512f391e296ee8a4d43a1e2148
Add enum to allow setting optional direction. If set to only one
direction, only feed matching-direction frames to the associated
slin factory.
This prevents mangling the transcoder on non-mixed frames when the
READ and WRITE frames would have otherwise required it. Also
removes the need to mute or discard the un-wanted frames as they
are no longer added in the first place.
res_stasis_snoop is changed to use this addition to set direction
on audiohook based on spy direction.
If no direction is set, the ast_audiohook_init will init this enum
to BOTH which maintains existing functionality.
ASTERISK-30252
Change-Id: If8716bad334562a5d812be4eeb2a92e4f3be28eb
Allows bridging, parking, and dial messages to be globally
ignored for all CDRs such that only a single CDR record
is generated per channel.
This is useful when CDRs should endure for the lifetime of
an entire channel and bridging and dial updates in the
dialplan should not result in multiple CDR records being
created for the call. With the ignore bridging option,
bridging changes have no impact on the channel's CDRs.
With the ignore dial state option, multiple Dials and their
outcomes have no impact on the channel's CDRs. The
last disposition on the channel is preserved in the CDR,
so the actual disposition of the call remains available.
These two options can reduce the amount of "CDR hacks" that
have hitherto been necessary to ensure that CDR was not
"spoiled" by these messages if that was undesired, such as
putting a dummy optimization-disabled local channel between
the caller and the actual call and putting the CDR on the channel
in the middle to ensure that CDR would persist for the entire
call and properly record start, answer, and end times.
Enabling these options is desirable when calls correspond
to the entire lifetime of channels and the CDR should
reflect that.
Current default behavior remains unchanged.
ASTERISK-30091 #close
Change-Id: I393981af42732ec5ac3ff9266444abb453b7c832
This patch adds support for mediasec SIP headers and SDP attributes.
These are defined in RFC 3329, 3GPP TS 24.229 and
draft-dawes-sipcore-mediasec-parameter. The new features are
implemented so that a backbone for RFC 3329 is present to streamline
future work on RFC 3329.
With this patch, Asterisk can communicate with Deutsche Telekom trunks
which require these fields.
ASTERISK-30032
Change-Id: Ia7f5b5ba42db18074fdd5428c4e1838728586be2
This patch adds a new option to the 100rel parameter for pjsip
endpoints called "peer_supported". When an endpoint with this option
receives an incoming request and the request indicated support for the
100rel extension, then Asterisk will send 1xx responses reliably. If
the request did not indicate 100rel support, Asterisk sends 1xx
responses normally.
ASTERISK-30158
Change-Id: Id6d95ffa8f00dab118e0b386146e99f254f287ad
Fixed a segfault caused by var_list_from_loc_info() encountering
an empty location info element.
Fixed an issue in ast_strsep() where a value with only whitespace
wasn't being preserved.
Fixed an issue in ast_variable_list_from_quoted_string() where
an empty value was considered a failure.
ASTERISK-30215
Reported by: Dan Cropp
Change-Id: Ieca64e061a6d9298f0196c694b60d986ef82613a
This change allows TEL URI requests to come through for basic calls. The
allowed requests are INVITE, ACK, BYE, and CANCEL. The From and To
headers will now allow TEL URIs, as well as the request URI.
Support is only for TEL URIs present in traffic from a remote party.
Asterisk does not generate any TEL URIs on its own.
ASTERISK-26894
Change-Id: If5729e6cd583be7acf666373bf9f1b9d653ec29a
We're validating the following functionality:
encrypting a block of data with RSA
decrypting a block of data with RSA
signing a block of data with RSA
verifying a signature with RSA
encrypting a block of data with AES-ECB
encrypting a block of data with AES-ECB
as well as accessing test keys from the keystore.
ASTERISK-30045 #close
Change-Id: I0d10e7b41009c5290a4356c6480e636712d5c96d
Use const char for char arguments to
pbx_substitute_variables_helper_full_location
that can do so (context and exten).
ASTERISK-30209 #close
Change-Id: I001357177e9c3dca2b2b4eebc5650c1095b3da6f
Added an 'a' option to the GEOLOC_PROFILE function to allow
variable lists like location_info_refinement to be appended
to instead of replacing the entire list.
Added an 'r' option to the GEOLOC_PROFILE function to resolve all
variables before a read operation and after a Set operation.
Added a few missing parameters to the ones allowed for writing
with GEOLOC_PROFILE.
Fixed a bug where calling GEOLOC_PROFILE to read a parameter
might actually update the profile object.
Cleaned up XML documentation a bit.
ASTERISK-30190
Change-Id: I75f541db43345509a2e86225bfa4cf8e242e5b6c
You can now specify the location object's format, location_info,
method, location_source and confidence parameters directly on
a profile object for simple scenarios where the location
information isn't common with any other profiles. This is
mutually exclusive with setting location_reference on the
profile.
Updated appdocsxml.dtd to allow xi:include in a configObject
element. This makes it easier to link to complete configOptions
in another object. This is used to add the above fields to the
profile object without having to maintain the option descriptions
in two places.
ASTERISK-30185
Change-Id: Ifd5f05be0a76f0a6ad49fa28d17c394027677569
Added profile parameter "suppress_empty_ca_elements" that
will cause Civic Address elements that are empty to be
suppressed from the outgoing PIDF-LO document.
Fixed a possible SEGV if a sub-parameter value didn't have a
value.
ASTERISK-30177
Change-Id: I924ccc5aa2f45110a3155b22e53dfaf3ef2092dd
If "core show channels" is run before startup has completed, it
is possible for bad ao2 refs to occur because the system is not
yet fully initialized. This will lead to an assertion failing.
To prevent this, initialization of CLI builtins is moved to be
later along in the main load sequence. Core CLI commands are
loaded at the same time, but channel-related commands are loaded
later on.
ASTERISK-29846 #close
Change-Id: If6b3cde802876bd738c1b4cf2683bea6ddc615b6
This change adds support using the pjsip_tls_transport_restart
function for reloading the TLS certificate and key, if the filenames
remain unchanged. This is useful for Let's Encrypt and other
situations. Note that no restart of the transport will occur if
the certificate and key remain unchanged.
ASTERISK-30186
Change-Id: I9bc95a6bf791830a9491ad9fa43c17d4010028d0
The DECLARE_STRINGFIELD_SETTERS_FOR() declares ast_channel_name_set()
for us, so no need to declare it separately.
Change-Id: I4813a884ada475ddc62bca480bceb4a53b3ec59a
Adds additional control options over the transfer
feature functionality to give users more control
in how the transfer feature sounds and works.
First, the "transfer" sound that plays when a transfer is
initiated can now be customized by the user in
features.conf, just as with the other transfer sounds.
Secondly, the user can now specify the transfer extension
in advance by using the TRANSFER_EXTEN variable. If
a valid extension is contained in this variable, the call
will automatically be transferred to this destination.
Otherwise, it will fall back to collecting the extension
from the user as is always done now.
ASTERISK-29899 #close
Change-Id: Ibff309caa459a2b958706f2ed0ca393b1ef502e3
Fixes a few coding guideline violations:
* Use of C99 comments
* Opening brace on same line as function prototype
ASTERISK-30163 #close
Change-Id: I07771c4c89facd41ce8d323859f022ddbddf6ca7
* Added processing for the 'confidence' element.
* Added documentation to some APIs.
* removed a lot of complex code related to the very-off-nominal
case of needing to process multiple location info sources.
* Create a new 'ast_geoloc_eprofile_to_pidf' API that just takes
one eprofile instead of a datastore of multiples.
* Plugged a huge leak in XML processing that arose from
insufficient documentation by the libxml/libxslt authors.
* Refactored stylesheets to be more efficient.
* Renamed 'profile_action' to 'profile_precedence' to better
reflect it's purpose.
* Added the config option for 'allow_routing_use' which
sets the value of the 'Geolocation-Routing' header.
* Removed the GeolocProfileCreate and GeolocProfileDelete
dialplan apps.
* Changed the GEOLOC_PROFILE dialplan function as follows:
* Removed the 'profile' argument.
* Automatically create a profile if it doesn't exist.
* Delete a profile if 'inheritable' is set to no.
* Fixed various bugs and leaks
* Updated Asterisk WiKi documentation.
ASTERISK-30167
Change-Id: If38c23f26228e96165be161c2f5e849cb8e16fa0
There are several things wrong with analog Caller ID
handling that are fixed by this commit:
callerid.c's Caller ID generation function contains the
logic to use the presentation to properly send the proper
Caller ID. However, currently, DAHDI does not pass any
presentation information to the Caller ID module, which
means that presentation is completely ignored on all calls.
This means that lines could be getting Caller ID information
they aren't supposed to.
Part of the reason this has been obscured is because the
simple switch logic for handling the built in *67 and *82
is completely wrong. Rather than modifying the presentation
for the call accordingly (which is what it's supposed to do),
it simply blanks out the Caller ID or fills it in. This is
wrong, so wrong that it makes a mockery of the specification.
Additionally, it would leave to the "UNAVAILABLE" disposition
being used for Caller ID generation as opposed to the "PRIVATE"
disposition that it should have been using. This is now fixed
to only update the presentation and not modify the number and
name, so that the simple switch *67/*82 work correctly.
Next, sig_analog currently only copies over the name and number,
nothing else, when it is filling in a duplicated caller id
structure. Thus, we also now copy over the presentation
information so that is available for the Caller ID spill.
Additionally, this meant that "valid" was implicitly 0,
and as such presentation would always fail to "Unavailable".
The validity is therefore also copied over so it can be used
by ast_party_id_presentation.
As part of this fix, new API is added so that all the relevant
Caller ID information can be passed in to the Caller ID generation
functions. Parameters that are also completely missing from the
Caller ID spill have also been added, to enhance the compatibility,
correctness, and completeness of the Asterisk Caller ID implementation.
ASTERISK-29991 #close
Change-Id: Icc44a5e09979916f4c18a440f96e10dc1c76ae15
This commit adds res_pjsip_geolocation which gives chan_pjsip
the ability to use the core geolocation capabilities.
This commit message is intentionally short because this isn't
a simple capability. See the documentation at
https://wiki.asterisk.org/wiki/display/AST/Geolocation
for more information.
THE CAPABILITIES IMPLEMENTED HERE MAY CHANGE BASED ON
USER FEEDBACK!
ASTERISK-30128
Change-Id: Ie2e2bcd87243c2cfabc43eb823d4427c7086f4d9
This commit adds res_geolocation which creates the core capabilities
to manipulate Geolocation information on SIP INVITEs.
An upcoming commit will add res_pjsip_geolocation which will
allow the capabilities to be used with the pjsip channel driver.
This commit message is intentionally short because this isn't
a simple capability. See the documentation at
https://wiki.asterisk.org/wiki/display/AST/Geolocation
for more information.
THE CAPABILITIES IMPLEMENTED HERE MAY CHANGE BASED ON
USER FEEDBACK!
ASTERISK-30127
Change-Id: Ibfde963121b1ecf57fd98ee7060c4f0808416303
* Added ast_variable_list_from_quoted_string()
Parse a quoted string into an ast_variable list.
* Added ast_str_substitute_variables_full2()
Perform variable/function/expression substitution on an ast_str.
* Added ast_strsep_quoted()
Like ast_strsep except you can specify a specific quote character.
Also added unit test.
* Added ast_xml_find_child_element()
Find a direct child element by name.
* Added ast_xml_doc_dump_memory()
Dump the specified document to a buffer
* ast_datastore_free() now checks for a NULL datastore
before attempting to destroy it.
Change-Id: I5dcefed2f5f93a109e8b489e18d80d42e45244ec
Currently, if using the CLI to delete a DB entry,
"Database entry removed" is always returned,
regardless of whether or not the entry actually
existed in the first place. This meant that users
were never told if entries did not exist.
The same issue occurs if trying to delete a DB key
using AMI.
To address this, new API is added that is more stringent
in deleting values from AstDB, which will not return
success if the value did not exist in the first place,
and will print out specific error details if available.
ASTERISK-30001 #close
Change-Id: Ic84e3eddcd66c7a6ed7fea91cdfd402568378b18
Mike Bradeen
Sean Bright
Maximilian Fridrich
Naveen Albert
George Joseph
Sean Bright
Igor Goncharovsky
George Joseph
Peter Fern
Michael Kuron
Henning Westerholt
Philip Prindeville
Ben Ford
Joshua C. Colp