If during translation a codec could not handle a given frame the translation
core would return NULL, thus not passing along the "missing" frame. Due to this
there was no frame to apply generic plc to, thus rendering it useless.
This patch makes it so the translation core produces an interpolated slin frame
in the cases where an attempt was made to translate to slin, but failed. This
interpolated frame is then passed along and can be used by the generic plc
algorithms to fill in the frame.
ASTERISK-27814 #close
Change-Id: I133d084da87adef913bf2ecc9c9240e3eaf4f40a
ast_format_get_sample_rate(.) returns an unsigned type. The difference of a
substraction between two unsigned types does not get implicitly converted to a
signed type. Therefore, using abs(.) did not make sense.
ASTERISK-27549
Change-Id: Ib904d9ee0d46b6fdd1476fbc464fbbf813304017
Translators are run during module load before the module is actually
running, so it cannot use ast_module_running_ref.
ASTERISK-20346
Change-Id: Iaa0e75da99c696e38000f1a41e340abbd7a88f56
This function returns NULL if the module in question is not running. I
did not change ast_module_ref as most callers do not check the result
and they always call ast_module_unref.
Make use of this function when running registered items from:
* app_stack API's
* bridge technologies
* CLI commands
* File formats
* Manager Actions
* RTP engines
* Sorcery Wizards
* Timing Interfaces
* Translators
* AGI Commands
* Fax Technologies
ASTERISK-20346 #close
Change-Id: Ia16fd28e188b2fc0b9d18b8a5d9cacc31df73fcc
* Fix small leaks in from error conditions in sdp.c and translate.c.
* Check new file descriptor is less than 0, not less than or equal.
Change-Id: Id7782775486175c739e0c4bf3ea5e17e3f452a99
When a format has no pre-recorded sound files, Asterisk has to transcode between
formats. For this, Asterisk has a fixed translation table. If the pre-recorded
sound files are not available in the same sample rate, Asterisk has not only to
transcode but also to resample.
Asterisk has pre-recorded files for SLN (8000 kHz) and SLN16 (16000 kHz).
However before this change, Asterisk did not take the sample rate into account,
because the translation paths to SLN and SLN16 got the same score/weight in the
table. Consequently, you might have got narrow-band audio with siren14, speex32,
silk24, and silk12 although those are (ultra) wide-band audio codecs.
With this change, the distance in sample-rates is taken into account. Now on the
Command-Line interface (CLI) 'core show channels', you should see:
(slin@16000)->(slin@32000)->(speex@32000).
ASTERISK-23735
Reported by: Richard Kenner
Change-Id: I9448295c1978be26f8633b6066395e7bbbe2e213
Interpolated frames are frames which contain a number of
samples but have no actual data. Audiohooks did not
handle this case when translating an incoming frame into
signed linear. It assumed that a frame would always contain
media when it may not. If this occurs audiohooks will now
immediately return and not act on the frame.
As well for users of ast_trans_frameout the function has
been changed to be a bit more sane and ensure that the data
pointer on a frame is set to NULL if no data is actually
on the frame. This allows the various spots in Asterisk that
check for an interpolated frame based on the presence of a
data pointer to work as expected.
ASTERISK-26926
Change-Id: I7fa22f631fa28d540722ed789ce28e84c7f8662b
This change adds experimental support for providing RTCP
feedback information to codec modules so they can dynamically
change themselves based on conditions.
ASTERISK-26584
Change-Id: Ifd6aa77fb4a7ff546c6025900fc2baf332c31857
ASTERISK_REGISTER_FILE no longer has any purpose so this commit removes
all traces of it.
Previously exported symbols removed:
* __ast_register_file
* __ast_unregister_file
* ast_complete_source_filename
This also removes the mtx_prof static variable that was declared when
MTX_PROFILE was enabled. This variable was only used in lock.c so it
is now initialized in that file only.
ASTERISK-26480 #close
Change-Id: I1074af07d71f9e159c48ef36631aa432c86f9966
This change introduced some fax test failures
that have not yet been addressed. So this is
not forgotten I'm submitting a change which
reverts it.
This reverts:
d56fc3b36b.
ASTERISK-25629
Change-Id: Ibc2f23c38643f5a2c89cf8915ae2d805b81bc3d5
If the destination format's name differed from the codec name then the
translator's explict_dst field would be improperly set. In some circumstances
it would end up setting it to a newly created format that has the same name
as the codec when it actually needed to be the given destination codec.
This could cause the translation path to use the wrong format. For instance,
if an endpoint had specified 'myulaw' as a format the translator could end up
using a 'ulaw' format (with whatever/default settings) instead. If the format
attribute settings differed between the two then there may unexpected results
during processing.
This patch removes the name check when building the translation path. This
should make it always set the translator's explicit_dst to the given destination
format as long as the sample rate and types match.
Change-Id: Iaf8a03831d68e657d89569d54b505074efbefab5
Previously, a trancoding module did not have access to the joint but cached
format. Therefore, the module did not have access to the attributes negotiated
via SDP (line fmtp). Now, a translation module receives the joint format.
ASTERISK-25545 #close
Change-Id: Id6878a989b50573298dab115d3371ea369e1a718
When Asterisk translates between codecs, each with a different frame size (for
example between iLBC 30 and Speex-WB), too large frames were created by
ast_trans_frameout. Now, ast_trans_frameout is called with the correct frame
length, creating several frames when necessary. Affects all transcoding modules
which used ast_trans_frameout: GSM, iLBC, LPC10, and Speex.
ASTERISK-25353 #close
Change-Id: I2e229569d73191d66a4e43fef35432db24000212
Git does not support the ability to replace a token with a version
string during check-in. While it does have support for replacing a
token on clone, this is somewhat sub-optimal: the token is replaced
with the object hash, which is not particularly easy for human
consumption. What's more, in practice, the source file version was often
not terribly useful. Generally, when triaging bugs, the overall version
of Asterisk is far more useful than an individual SVN version of a file. As a
result, this patch removes Asterisk's support for showing source file
versions.
Specifically, it does the following:
* Rename ASTERISK_FILE_VERSION macro to ASTERISK_REGISTER_FILE, and
remove passing the version in with the macro. Other facilities
than 'core show file version' make use of the file names, such as
setting a debug level only on a specific file. As such, the act of
registering source files with the Asterisk core still has use. The
macro rename now reflects the new macro purpose.
* main/asterisk:
- Refactor the file_version structure to reflect that it no longer
tracks a version field.
- Remove the "core show file version" CLI command. Without the file
version, it is no longer useful.
- Remove the ast_file_version_find function. The file version is no
longer tracked.
- Rename ast_register_file_version/ast_unregister_file_version to
ast_register_file/ast_unregister_file, respectively.
* main/manager: Remove value from the Version key of the ModuleCheck
Action. The actual key itself has not been removed, as doing so would
absolutely constitute a backwards incompatible change. However, since
the file version is no longer tracked, there is no need to attempt to
include it in the Version key.
* UPGRADE: Add notes for:
- Modification to the ModuleCheck AMI Action
- Removal of the "core show file version" CLI command
Change-Id: I6cf0ff280e1668bf4957dc21f32a5ff43444a40e
Given a source capability of h264 and ulaw, a destination capability of
h264 and g722 then ast_translator_best_choice() would pick h264 as the
best choice even though h264 is a video codec and Asterisk only supports
translation of audio codecs. When the audio starts flowing, there are
warnings about a codec mismatch when the channel tries to write a frame to
the peer.
* Made ast_translator_best_choice() only select audio codecs.
* Restore a check in channel.c:set_format() lost after v1.8 to prevent
trying to set a non-audio codec.
This is an intermediate patch for a series of patches aimed at improving
translation path choices for ASTERISK-24841.
This patch is a complete enough fix for ASTERISK-21777 as the v11 version
of ast_translator_best_choice() does the same thing. However, chan_sip.c
still somehow tries to call ast_codec_choose() which then calls
ast_best_codec() with a capability set that doesn't contain any audio
formats for the incoming call. The remaining warning message seems to be
a benign transient.
ASTERISK-21777 #close
Reported by: Nick Ruggles
ASTERISK-24380 #close
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/4605/
........
Merged revisions 434614 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 434615 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434616 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a 'core restart now' or 'core stop now' is executed and a channel is
currently in a media operation, the translator matrix can be destroyed while a
channel is currently blocked on getting the best translation choice
(see ast_translator_best_choice). When the channel gets the mutex, the
translation matrix now has invalid memory, and Asterisk crashes.
This patch does two things:
(1) We now only clean up the translation matrix on a graceful shutdown. In that
case, there are no channels, and so there is no risk of this occurring.
(2) We also now set the __matrix and __indextable to NULL. In some initial
backtraces when this occurred, it looked as if there was a memory corruption
occurring, and it wasn't until we determined that something had restarted
Asterisk that the issue became clear. By setting these to NULL on shutdown,
it becomes a bit easier to determine why a crash is occurring.
Note that we could litter the code with NULL checks on the __matrix, but the
act of making the translation matrix cleaned up on shutdown should preclude
this issue from occurring in the first place, and this part of the code needs
to be as fast as possible.
Review: https://reviewboard.asterisk.org/r/4457/
........
Merged revisions 432453 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432455 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fix the AMI Status action read and write translation path strings from
growing for each channel in the status event list by reseting the ast
string given to ast_translate_path_to_str() to fill in the given
translation path.
........
Merged revisions 426079 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@426080 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Empty here means that there are no formats in the format_cap structure
or the only format in it is the "none" format.
I've added calls to check the emptiness of a format_cap in a few places
in order to short-circuit operations that would otherwise be pointless
as well as to prevent some assertions from being triggered in cases
where channels with no formats are used.
........
Merged revisions 423414 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423415 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When translating from one format to another it is possible
to inform the translation function that the source frame should
be freed. This was previously done immediately but shortly
afterwards the frame that was freed was accessed and used again.
This change moves code around a bit so that the frame is now
freed after it has been completely used.
(closes issue ASTERISK-22788)
Reported by: Corey Farrell
Patches:
translate-access-after-free-11up.patch uploaded by coreyfarrell (license 5909)
translate-access-after-free-1.8.patch uploaded by coreyfarrell (license 5909)
........
Merged revisions 403014 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 403015 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 403016 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403017 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Debug messages aren't free. Even when the debug level is sufficiently low such
that the messages are never evaluated, there is a cost to having to parse
Asterisk logs that contain debug messages that (a) fail to convey sufficient
information or (b) occur so frequently as to be next to meaningless. Based on
having to stare at lots of DEBUG messages, this patch makes the following
changes:
* channel.c: When copying variables from a parent channel to a child channel,
specify the channels involved. Do not log anything for a variable that is not
inherited; the fact that it doesn't have an _ or __ already signifies that it
won't be inherited.
* pbx.c: Specify what function evaluation has occurred that created the result.
* translate.c: Bump up the translator path messages to 10. I've never once had
to use these debug messages, and for each format that is registered (on
startup) and unregistered (on shutdown) the entire f^2 matrix is logged out.
For short tests in the Asterisk Test Suite, this should make finding the
actual test much easier.
* xmldoc.c: The debug message that 'blah' is not found in the tree is expected.
Often, description elements - which are not required - are not provided.
This debug message adds no additional value, as it is not indicative of an
error or helpful in debugging which element did not contain a 'blah' element
as a child. If an element is supposed to contain a child element, then that
XML tree should have failed validation in the first place.
Review: https://reviewboard.asterisk.org/r/2966/
........
Merged revisions 402150 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 402151 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 402154 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402155 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Consistently compare format2index() return value so matrix_get() cannot
get passed negative values.
* Optimize ast_translator_best_choice() to defer initializing things until
needed. Also cached the matrix_get() return value rather than repeatedly
calling it.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@401039 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r369001 | kpfleming | 2012-06-15 10:56:08 -0500 (Fri, 15 Jun 2012) | 11 lines
Add support-level indications to many more source files.
Since we now have tools that scan through the source tree looking for files
with specific support levels, we need to ensure that every file that is
a component of a 'core' or 'extended' module (or the main Asterisk binary)
is explicitly marked with its support level. This patch adds support-level
indications to many more source files in tree, but avoids adding them to
third-party libraries that are included in the tree and to source files
that don't end up involved in Asterisk itself.
........
r369002 | kpfleming | 2012-06-15 10:57:14 -0500 (Fri, 15 Jun 2012) | 3 lines
Add a script to enable finding source files without support-levels defined.
........
Merged revisions 369001-369002 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 369005 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369013 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Everything still compiled after making these changes, so I assume these
whitespace-only changes didn't break anything (and shouldn't have).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@360190 65c4cc65-6c06-0410-ace0-fbb531ad65f3
-Functional changes
1. Dynamic global format list build by codecs defined in codecs.conf
2. SILK 8khz, 12khz, 16khz, and 24khz with custom attributes defined in codecs.conf
3. Negotiation of SILK attributes in chan_sip.
4. SPEEX 32khz with translation
5. SLINEAR 8khz, 12khz, 24khz, 32khz, 44.1khz, 48khz, 96khz, 192khz with translation
using codec_resample.c
6. Various changes to RTP code required to properly handle the dynamic format list
and formats with attributes.
7. ConfBridge now dynamically jumps to the best possible sample rate. This allows
for conferences to take advantage of HD audio (Which sounds awesome)
8. Audiohooks are no longer limited to 8khz audio, and most effects have been
updated to take advantage of this such as Volume, DENOISE, PITCH_SHIFT.
9. codec_resample now uses its own code rather than depending on libresample.
-Organizational changes
Global format list is moved from frame.c to format.c
Various format specific functions moved from frame.c to format.c
Review: https://reviewboard.asterisk.org/r/1104/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@308582 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is the foundation of an entire new way of looking at media in Asterisk.
The code present in this patch is everything required to complete phase1 of my
Media Architecture proposal. For more information about this project visit the link below.
https://wiki.asterisk.org/wiki/display/AST/Media+Architecture+Proposal
The primary function of this patch is to convert all the usages of format
bitfields in Asterisk to use the new format and format_cap APIs. Functionally
no change in behavior should be present in this patch. Thanks to twilson
and russell for all the time they spent reviewing these changes.
Review: https://reviewboard.asterisk.org/r/1083/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306010 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r282047 | dvossel | 2010-08-12 15:15:41 -0500 (Thu, 12 Aug 2010) | 35 lines
improved translation paths for wideband codecs
The problem I'm addressing is that Asterisk's current
method of building the least cost translation paths
between codecs does not take into account sample rate.
For instance, it was possible for siren14 (a 32khz codec),
to contain the a translation path to siren7 (a 16khz
audio codec) that goes through slin at 8khz. In this
case Asterisk takes a 32khz codec, down samples it to
8khz and then up samples it to 16khz which is terrible
regardless if it is computationally less expensive. This
patch now builds translation paths that give priority to
maintaining the best possible sample rate before taking
into consideration computational cost. This patch also
adds cli commands to expose what translation paths are
actually being used.
Changes:
1. Translation paths will never contain a step that changes
the sample rate unless absolutely necessary.
2. When choosing the best codec to make two channels compatible.
Shared codecs with the highest sample rate are given priority.
3. A new cli command to show all translation paths available
for a specific codec 'core show translation paths [codec name]'
has been added.
4. 'core show translation' which displays the translation
matrix now includes the new higher bit audio codecs in the table.
5. 'core show channel [channel name]' now displays the
translation paths if translation is used.
(closes issue #16841)
Reported by: dvossel
Review: https://reviewboard.asterisk.org/r/842/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@282048 65c4cc65-6c06-0410-ace0-fbb531ad65f3