This fixes ast_addressfamily_to_sockaddrsize to reference the
provided argument, and ast_sockaddr_from_sockaddr to not use the name of
a structure as argument.
Change-Id: Ibf5db469c47c3b4214edf8456326086174e8edd7
This commit sets up some of the initial framework for the module and
adds a way to read the private key from the specified file, which will
then be appended to the certificate object. This works fine for now, but
eventually some other structure will likely need to be used to store all
this information. Similarly, the caller_id_number is specified on the
certificate config object, but in the end we will want that information
to be tied to the certificate itself and read it from there.
A method has been added that will retrieve the private key associated
with the caller_id_number passed in. Tab completion for certificates and
stores has also been added.
Change-Id: Ic4bc1416fab5d6afe15a8e2d32f7ddd4e023295f
Add a new option, incoming_call_offer_pref, to res_pjsip endpoints that
specifies the preferred order of codecs after receiving an offer.
This patch does the following:
Adds a new enumeration, ast_sip_call_codec_pref, used by the the new
configuration option that's added to the endpoint media structure.
Adds a new ast_sip_session_caps structure that's set for each session media
object.
Creates a new file, res_pjsip_session_caps that "implements" the new
structure and option, and is compiled into the res_pjsip_session library.
ASTERISK-28756 #close
Change-Id: I35e7a2a0c236cfb6bd9cdf89539f57a1ffefc76f
When a text message was received any associated variable was not written to
the ARI TextMessageReceived event. This occurred because Asterisk only wrote
out "send" variables. However, even those "send" variables would fail ARI
validation due to a TextMessageVariable formatting bug.
Since it seems the TextMessageReceived event has never been able to include
actual variables it was decided to remove the TextMessageVariable object type
from ARI, and simply return a JSON object of key/value pairs for variables.
This aligns more with how the ARI sendMessage handles variables, and other
places in ARI.
ASTERISK-28755 #close
Change-Id: Ia6051c01a53b30cf7edef84c27df4ed4479b8b6f
Update the state of remote_hold immediately on receipt of remote
SDP so that the information is available when building the SDP
answer
ASTERISK-28754 #close
Change-Id: I7026032a807e9c95081cb8f060400b05deb4836f
There were a couple places where the format cap function parameter was not
'const' when it should have been. This patch makes them 'const'.
Change-Id: Ife753fb16a962d842a6b44f45363a61a66bfdb2e
There are exceptions for plural objects, but they are detected using the
supplied NUMBER, not using an extra option.
Change-Id: I95d1d1b2796b1aba92048a2dbae8a3856ed8a113
This change extends the Sorcery API to allow a wizard to be
told to explicitly reload objects or a specific object type
even if the wizard believes that nothing has changed.
This has been leveraged by res_pjsip and res_pjsip_acl to
reload endpoints and PJSIP ACLs when a named ACL changes.
ASTERISK-28697
Change-Id: Ib8fee9bd9dd490db635132c479127a4114c1ca0b
This change adds support to bridge_softmix to allow the addition
and removal of additional video source streams. When such a change
occurs each participant is renegotiated as needed to reflect the
update. If another video source is added then each participant
gets another source. If a video source is removed then it is
removed from each participant. This functionality allows you to
have both your webcam and screenshare providing video if you
desire, or even more streams. Mapping has been changed to use
the topology index on the source channel as a unique identifier
for outgoing participant streams, this will never change and
provides an easy way to establish the mapping.
The bridge_simple and bridge_native_rtp modules have also been
updated to renegotiate when the stream topology of a party changes
allowing the same behavior to occur as added to bridge_softmix.
If a screen share is added then the opposite party is renegotiated.
If that screen share is removed then the opposite party is
renegotiated again.
Some additional fixes are also included in here. Stream state is
now conveyed in SDP so sendonly/recvonly/inactive streams can
be requested. Removed streams now also remove previous state
from themselves so consumers don't get confused.
ASTERISK-28733
Change-Id: I93f41fb41b85646bef71408111c17ccea30cb0c5
When handling ICE negotiations, it's possible that there can be a delay
between STUN binding requests which in turn will cause a delay in ICE
completion, preventing media from flowing. It should be possible to send
media when there is at least one valid pair, preventing this scenario
from occurring.
A change was added to PJPROJECT that adds an optional callback
(on_valid_pair) that will be called when the first valid pair is found
during ICE negotiation. Asterisk uses this to start the DTLS handshake,
allowing media to flow. It will only be called once, either on the first
valid pair, or when ICE negotiation is complete.
ASTERISK-28716
Change-Id: Ia7b68c34f06d2a1d91c5ed51627b66fd0363d867
In order to reduce the amount of AMI and ARI events generated,
the global "Message/ast_msg_queue" channel can be set to suppress
it's normal channel housekeeping events such as "Newexten",
"VarSet", etc. This can greatly reduce load on the manager
and ARI applications when the Digium Phone Module for Asterisk
is in use. To enable, set "hide_messaging_ami_events" in
asterisk.conf to "yes" In Asterisk versions <18, the default
is "no" preserving existing behavior. Beginning with
Asterisk 18, the option will default to "yes".
NOTE: This change does not affect UserEvents or the ARI
TextMessageReceived events.
* Added the "hide_messaging_ami_events" option to asterisk.conf.
* Changed message.c to set the AST_CHAN_TP_INTERNAL property on
the "Message/ast_msg_queue" channel if the option is set in
asterisk.conf. This suppresses the reporting of the events.
Change-Id: Ia2e3516d43f4e0df994fc6598565d6bba2d7018b
This commit adds support for
[AudioSocket](
https://wiki.asterisk.org/wiki/display/AST/AudioSocket),
a very simple bidirectional audio streaming protocol. There are both
channel and application interfaces.
A description of the protocol can be found on the above referenced
GitHub page. A short talk about the reasons and implementation can be
found on [YouTube](https://www.youtube.com/watch?v=tjduXbZZEgI), from
CommCon 2019.
ARI support has also been added via the existing "externalMedia" ARI
functionality. The UUID is specified using the arbitrary "data" field.
ASTERISK-28484 #close
Change-Id: Ie866e6c4fa13178ec76f2a6971ad3590a3a588b5
ast_addressfamily_to_sockaddrize will determine the size that's
required, and ast_sockaddr_from_sockaddr then wraps this new function
and ast_sockaddr_copy_sockaddr to copy arbitrary sockaddr's (without
knowing the address family) into the ast_sockaddr structure.
Change-Id: Iee604e96e9096c79b477d6e5ff310cf0b06dae86
Signed-off-by: Jaco Kroon <jaco@uls.co.za>
Some body generators, such as dialog-info+xml, require storing state
information which is then conveyed in the NOTIFY request itself. Up
until now there was no way for such body generators to persist this
information.
Two new API calls have been added to allow body generators to set and
get persisted data. This data is persisted out alongside the normal
persistence information and allows the body generator to restore
state information or to simply use this for normal storage of state.
State is stored in the form of JSON and it is up to the body
generator to interpret this as needed.
The dialog-info+xml body generator has been updated to take advantage
of this to persist the version number.
ASTERISK-27759
Change-Id: I5fda56c624fd13c17b3c48e0319b77079e9e27de
Adds source port matching support when IP matching is used:
[example]
type = identify
match = 1.2.3.4:5060/32, 1.2.3.4:6000/32, asterisk.org:4444
If the IP matches but the source port does not, we reject and search for
alternatives. SRV lookups are still performed if enabled (srv_lookups = yes),
unless the configured FQDN includes a port number in which case just a host
lookup is performed.
ASTERISK-28639 #close
Reported by: Mitch Claborn
Change-Id: I256d5bd5d478b95f526e2f80ace31b690eebba92
When a topic is created for an object, its name is only
<object>:<uniqueid>
For example:
bridge:cb68b3a8-fce7-4738-8a17-d7847562f020
When a topic is added to a pool, its name has the pool's topic
name prepended. For example:
bridge:all/bridge:cb68b3a8-fce7-4738-8a17-d7847562f020
The topic_pool_entry's name however, is only what was passed
in to stasis_topic_pool_get_topic which is
bridge:cb68b3a8-fce7-4738-8a17-d7847562f020
That's actually correct because the entry is qualified by the
pool that's in.
When you're ready to delete the entry from the pool, you retrieve
the tropic name from the object but since it now has the pool's
topic name prepended, it won't be found in the pool container.
Fix:
* Modified stasis_topic_pool_delete_topic() to skip past the
pool topic's name, if it was prepended to the topic name,
before searching the container for a pool entry.
ASTERISK-28633
Reported by: Joeran Vinzens
Change-Id: I4396aa69dd83e4ab84c5b91b39293cfdbcf483e6
When TLS is in use, checking the readiness of the underlying FD is insufficient
for determining if there is data available to be read. So before polling the
FD, check if there is any buffered data in the TLS layer and use that first.
ASTERISK-28562 #close
Reported by: Robert Sutton
Change-Id: I95fcb3e2004700d5cf8e5ee04943f0115b15e10d
This patch adds a new flag "inhibitConnectedLineUpdates" to the 'addChannel'
operation in the Bridges REST API. When set, this flag avoids generating COLP
frames when the specified channels enter the bridge.
ASTERISK-28629
Change-Id: Ib995d4f0c6106279aa448b34b042b68f0f2ca5dc
Instead of trying to use the defined MySQL client version from the
header use a configure check to determine whether the bool or my_bool
type should be used for defining a boolean.
ASTERISK-28604
Change-Id: Id2225b3785115de074c50c123ff1a68005b4a9c7
ConfBridge has the ability to move between different sample
rates for mixing the conference bridge. Up until now there has
only been the ability to set the conference bridge to mix at
a specific sample rate, or to let it move between sample rates
as necessary. This change adds the ability to configure a
conference bridge with a maximum sample rate so it can move
between sample rates but only up to the configured maximum.
ASTERISK-28658
Change-Id: Idff80896ccfb8a58a816e4ce9ac4ebde785963ee
A previous patch:
Gerrit Change-Id: I73bb24799bfe1a48adae9c034a2edbae54cc2a39
made it so a T.38 Gateway tries to negotiate with both sides by sending T.38
negotiation request to both endpoints supported T.38 versus the previous
behavior of forwarding negotiation to the "other" channel once a preamble
was detected.
This had the unfortunate side effect of breaking some setups. Specifically
ones that set the max datagram option on an endpoint configuration (configured
max datagram was not propagated since Asterisk now initiates negotiations).
This patch adds a configuration option, "negotiate_both", that when enabled
makes it so Asterisk initiates the negotiation requests to both endpoints vs.
the previous behavior of waiting, and forwarding the request.
The default is disabled keeping with the old behavior.
ASTERISK-28660
Change-Id: I5deb875f3485e20bc75119ec743090655d864a1a
Due to use in res_rtp_asterisk there is a need to be able to apply an
ACL without logging any invalid/denies. It's probably sensible to at
least validate the ACL once directly after load and report invalid ACLs.
Change-Id: I256169229d945ca7c1bbf228fc492d91df345843
Signed-off-by: Jaco Kroon <jaco@uls.co.za>
This patch fixes several issues reported by the lgtm code analysis tool:
https://lgtm.com/projects/g/asterisk/asterisk
Not all reported issues were addressed in this patch. This patch mostly fixes
confirmed reported errors, potential problematic code points, and a few other
"low hanging" warnings or recommendations found in core supported modules.
These include, but are not limited to the following:
* innapropriate stack allocation in loops
* buffer overflows
* variable declaration "hiding" another variable declaration
* comparisons results that are always the same
* ambiguously signed bit-field members
* missing header guards
Change-Id: Id4a881686605d26c94ab5409bc70fcc21efacc25
* Pass caller information to frame allocation functions.
* Disable caching as it interfers with MALLOC_DEBUG reporting.
* Stop using ast_calloc_cache.
Change-Id: Id343cd80a3db941d2daefde2a060750fea8cd260
Both res_pjsip and res_pjsip_mwi made use of serializer pools. However, they
both implemented their own serializer pool functionality that was pretty much
identical in each of the source files. This patch removes the duplicated code,
and uses the new 'ast_serializer_pool' object instead.
Additionally res_pjsip_mwi enables a shutdown group on the pool since if the
timing was right the module could be unloaded while taskprocessor threads still
needed to execute, thus causing a crash.
Change-Id: I959b0805ad024585bbb6276593118be34fbf6e1d
Serializer pools have previously existed in Asterisk. However, for the most
part the code has been duplicated across modules. This patch abstracts the
code into an 'ast_serializer_pool' object. As well the code is now centralized
in serializer.c/h.
In addition serializer pools can now optionally be monitored by a shutdown
group. This will prevent the pool from being destroyed until all serializers
have completed.
Change-Id: Ib1e906144b90ffd4d5ed9826f0b719ca9c6d2971
Add a new dialplan function PJSIP_MOH_PASSTHROUGH that allows
the on-hold behavior to be controlled on a per-call basis
ASTERISK-28542 #close
Change-Id: Iebe905b2ad6dbaa87ab330267147180b05a3c3a8
Previous to this patch passing a NULL tag to ao2_alloc or ao2_ref based
functions would result in the reference not being logged under
REF_DEBUG. This could sometimes cause inaccurate logging if NULL was
accidentally passed to a reference action. Now reference logging is
only disabled by option passed to the allocation method.
Change-Id: I3c17d867d901d53f9fcd512bef4d52e342637b54
This change adds support to the JITTERBUFFER dialplan function
for audio and video synchronization. When enabled the RTCP SR
report is used to produce an NTP timestamp for both the audio and
video streams. Using this information the video frames are queued
until their NTP timestamp is equal to or behind the NTP timestamp
of the audio. The audio jitterbuffer acts as the leader deciding
when to shrink/grow the jitterbuffer when adaptive is in use. For
both adaptive and fixed the video buffer follows the size of the
audio jitterbuffer.
ASTERISK-28533
Change-Id: I3fd75160426465e6d46bb2e198c07b9d314a4492
This change adds H.265/HEVC as a known codec and creates a cached
"h265" media format for use.
Note that RFC 7798 section 7.2 also describes additional SDP
parameters. Handling of these is not yet supported.
ASTERISK-28512
Change-Id: I26d262cc4110b4f7e99348a3ddc53bad0d2cd1f2
When modifying an already defined variable in some channel drivers they
add a new variable with the same name to the list, but that value is
never used, only the first one found.
Introduce ast_variable_list_replace() and use it where appropriate.
ASTERISK-23756 #close
Patches:
setvar-multiplie.patch submitted by Michael Goryainov
Change-Id: Ie1897a96c82b8945e752733612ee963686f32839
Jaco Kroon
Ben Ford
Sean Bright
George Joseph
Joshua Colp
Kevin Harwell
Torrey Searle
Walter Doekes
Friendly Automation
Seán C McCord
Jean Aunis
Joshua Colp
Corey Farrell
Florian Floimair