Select what to do with outgoing COLP information on this port.
0 - Send out COLP information unaltered. (default)
1 - Force COLP to restricted on all outgoing COLP information.
2 - Do not send COLP information.
outgoing_colp=0
Also fixed sending the EctInform message so it always has the
required redirectionNumber parameter when the status is active.
JIRA ABE-1853
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@194479 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Wait for a DivertingLegInformation3 message after receiving a
DivertingLegInformation1 message to complete the redirecting-to information
before queuing a redirecting update to the other channel.
* A DivertingLegInformation2 message should be responded to with a
DivertingLegInformation3 when the COLR is determined. If the call
could or does experience another redirection, you should manually
determine the COLR to send to the switch by setting REDIRECTING(to-pres)
to the COLR and setting REDIRECTING(to-num) = ${EXTEN}.
* A DivertingLegInformation2 message must have an original called number
if the redirection count is greater than one. Since Asterisk does
not keep track of this information, we can only indicate that the
number is not available due to interworking.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@190735 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The channel drivers which have been most heavily tested with these enhancements are
chan_sip and chan_misdn. Further work is being done to add Q.SIG support and will be
introduced in a later commit. chan_skinny has code added to it here, but according
to user pj, the support on chan_skinny is not working as of now. This will be fixed in
a later commit.
A special thanks goes out to bugtracker user gareth for getting the ball rolling and
providing the initial support for this work. Without his initial work on this, this would
not have been nearly as painless as it was.
This functionality has been tested by Digium's product quality department, as well as a
customer site running thousands of calls every day. In addition, many many many many bugtracker
users have tested this, too.
(closes issue #8824)
Reported by: gareth
Review: http://reviewboard.digium.com/r/201
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@186525 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r185120 | rmudgett | 2009-03-30 15:38:11 -0500 (Mon, 30 Mar 2009) | 19 lines
Make chan_misdn BRI TE side normally defer channel selection to the NT side.
Channel allocation collisions are not handled by chan_misdn very well.
This patch simply avoids the problem for BRI only.
For PRI, allocation collisions are still possible but less likely since
there are simply more channels available and each end could use a different
allocation strategy.
misdn.conf options available:
te_choose_channel - Use to force the TE side to allocate channels.
method - Specify the channel allocation strategy.
(closes issue #13488)
Reported by: Christian_Pinedo
Patches:
isdn_lib.patch.txt uploaded by crich
Tested by: crich, siepkes, festr
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@185122 65c4cc65-6c06-0410-ace0-fbb531ad65f3
more merge compatible in the mISDN area.
channels/chan_misdn.c
* Eliminated redundant code in cb_events() EVENT_SETUP
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@145200 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Made bearer2str() use allowed_bearers_array[]
* Made use the causes.h defines instead of hardcoded numbers.
* Made use Asterisk presentation indicator values if either of the
mISDN presentation or screen options are negative.
* Updated the misdn_set_opt application option descriptions.
* Renamed the awkward Caller ID presentation misdn_set_opt
application option value not_screened to restricted.
Deprecated the not_screened option value.
channels/misdn/isdn_lib.c
* Made use the causes.h defines instead of hardcoded numbers.
* Fixed some spelling errors and typos.
* Added all defined facility code strings to fac2str().
channels/misdn/isdn_lib.h
* Added doxygen comments to struct misdn_bchannel.
channels/misdn/isdn_lib_intern.h
* Added doxygen comments to struct misdn_stack.
channels/misdn_config.c
configs/misdn.conf.sample
* Updated the mISDN presentation and screen parameter descriptions.
doc/tex/misdn.tex
* Updated the misdn_set_opt application option descriptions.
* Fixed some spelling errors and typos.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@138738 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r132826 | crichter | 2008-07-23 13:37:50 +0200 (Mi, 23 Jul 2008) | 1 line
another Fix because of r119585, this commit has broken high frequented BRI Ports, there was a possibility that a channel, that was marked as in_use would be reused later, the corresponding port could got stuck then. So it is recommended to upgrade for chan_misdn users.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@132883 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r119585 | crichter | 2008-06-02 10:35:28 +0200 (Mo, 02 Jun 2008) | 1 line
Added counter for unhandled_bmsg Print, this prevents the logs to be flooded to fast and save CPU in this error scenario. Added 'last_used' element to bc structure, when a bchannel changes from used to free this exact time will be marked in last_used. When a new channel is requested the find_free_chan function will check if the new empty channel was used within the last second, if yes it will search for the next channel, if no it will return this channel. This simple mechanism has prooven to prevent race conditions where the NT and TE tried to allocate the exact same channel at the same time (RELEASE cause: 44).
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@119586 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89172 | crichter | 2007-11-12 12:23:57 +0100 (Mo, 12 Nov 2007) | 1 line
added restart all interfaces Restart_Indicator, to automatically send a RESTART after the L2 of a PTP Port comes up. Also fixed some places where we have send a RELEASE without need for it.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89178 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89171 | crichter | 2007-11-12 12:13:13 +0100 (Mo, 12 Nov 2007) | 1 line
fixed a state/event issue with overlapdial=yes when no extension matched. removed the general sending of a RELEASE_COMPLETE when we receive a RELEASE, this is done by mISDNuser/mISDN. This makes it possible to use asterisk-1.4 with mISDN trunk, but requires users of mISDN/mISDNuser-1.1.X to upgrade to at least mISDNuser-1.1.6 (when using the NT mode at all)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89176 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89169 | crichter | 2007-11-12 10:45:36 +0100 (Mo, 12 Nov 2007) | 1 line
aded ntkeepcalls option, to avoid droÃpping calls when the L2 goes down on a PTP link. There are some pbx which do turn off the L1 for a very short while and restart it immediately. normally T310 should be started and after 10 seconds or so the calls should be dropped, this is a simple fix wihtout this timer.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89174 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r81367 | crichter | 2007-08-30 10:31:59 +0200 (Do, 30 Aug 2007) | 11 lines
Fixed a severe issue where a misdn_read would lock the channel, but read would
not return because it blocks. later chan_misdn would try to queue a frame like
a AST_CONTROL_ANSWER which could result in a deadlock situation. misdn_read
will now not block forever anymore, and we don't queue the ANSWER frame at all
when we already was called with misdn_answer -> answer would be called twice.
Also we don't explicitly send a RELEASE_COMPLETE on receiption of a RELEASE
anymore, because mISDN does that for us, this resulted in a problem on some
switches, which would block our port after some calls for a short while.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@81368 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r72852 | crichter | 2007-07-02 10:41:08 +0200 (Mo, 02 Jul 2007) | 9 lines
Merged revisions 72585 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r72585 | crichter | 2007-06-29 15:08:26 +0200 (Fr, 29 Jun 2007) | 1 line
check if the bchannel stack id is already used, if so don't use it a second time. Also added a release_chan lock, so that the same chan_list object cannot be freed twice. chan_misdn does not crash anymore on heavy load with these changes.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@72869 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r72851 | crichter | 2007-07-02 10:27:19 +0200 (Mo, 02 Jul 2007) | 9 lines
Merged revisions 72099 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r72099 | crichter | 2007-06-27 15:22:37 +0200 (Mi, 27 Jun 2007) | 1 line
simplified generation for dummy bchannels, also we mark them as dummies, so they are not used later as real-bchannels, optimized the RESTART mechanisms, we block a channel now on cause:44, and send out a RESTART automatically, then on reception of RESTART_ACKNOWLEDGE we unblock the channel again.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@72868 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r72042 | crichter | 2007-06-27 09:58:06 +0200 (Mi, 27 Jun 2007) | 13 lines
Merged revisions 72040-72041 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r72040 | crichter | 2007-06-27 09:49:27 +0200 (Mi, 27 Jun 2007) | 1 line
for inbound TE calls, we setup the bchannel when we get the CONNECT_ACKNOWLEDGE, to make sure mISDN has everything ready. removed some #if 0 areas which weren't used anymore.
........
r72041 | crichter | 2007-06-27 09:54:30 +0200 (Mi, 27 Jun 2007) | 1 line
isdn_lib.c didn't compile
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@72052 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r71121 | crichter | 2007-06-22 17:32:54 +0200 (Fr, 22 Jun 2007) | 9 lines
Merged revisions 70311 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r70311 | crichter | 2007-06-20 16:47:59 +0200 (Mi, 20 Jun 2007) | 1 line
on receiption of cause:44 we mark the channel as in use and inform the user about the situation, we need to test the RESTART stuff then. Also shuffled the empty_chan_in_stack function after the bchannel cleaning functions, to avoid race conditions.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@71497 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r63534 | crichter | 2007-05-09 15:17:10 +0200 (Mi, 09 Mai 2007) | 17 lines
Merged revisions 62945,63402,63519 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r62945 | crichter | 2007-05-03 17:39:21 +0200 (Do, 03 Mai 2007) | 1 line
when we're in state WAITING4DIGS, we use the asterisk tone-generator which prods us, so we can't just return -1 in misdn_write in this case. Added a MISDN_KEYPAD channel variable, and fixed the sending of keypad. this enables us to modify the call forward parameters in the switch.
........
r63402 | crichter | 2007-05-08 17:07:37 +0200 (Di, 08 Mai 2007) | 1 line
added application misdn_check_l2l1 which tries to pull up the L1/L2 on all ports that have the layers down in a group. It waits then for a timeout. This helps for scenarios where multiple PMP BRIs are grouped together, or where a provider has a faulty PTP Implementation, that looses the L2 after a while.
........
r63519 | crichter | 2007-05-09 13:26:16 +0200 (Mi, 09 Mai 2007) | 1 line
release_chan frees ch, so we should never touch ch after release_chan, this may cause segfaults.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@64957 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r62912 | crichter | 2007-05-03 16:36:32 +0200 (Do, 03 Mai 2007) | 17 lines
Merged revisions 61357,61770,62885 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r61357 | crichter | 2007-04-11 14:05:57 +0200 (Mi, 11 Apr 2007) | 1 line
some fixes for PMP Hold/Retrieve, it should work now, when briding=no
........
r61770 | crichter | 2007-04-24 15:50:05 +0200 (Di, 24 Apr 2007) | 1 line
added lock for sending messages to avoid double sending. shuffled some empty_chans after the cb_event calls, this avoids that a release_complete from a quite different call releases a fresh created setup by accident.
........
r62885 | crichter | 2007-05-03 15:59:00 +0200 (Do, 03 Mai 2007) | 1 line
fixed the problem that misdn_write did not return -1 when called with 0 samples in a frame this resultet in a deadlock in some circumstances, when the call ended because of a busy extension. added encoding of keypad.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@64955 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r59774 | crichter | 2007-04-03 09:20:27 +0200 (Di, 03 Apr 2007) | 17 lines
Merged revisions 59623-59624,59639 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r59623 | crichter | 2007-04-02 09:12:24 +0200 (Mo, 02 Apr 2007) | 1 line
we can now make 30 channels on a PRI (before we forgot chan 31..)
........
r59624 | crichter | 2007-04-02 09:25:54 +0200 (Mo, 02 Apr 2007) | 1 line
don't be verbose if no need
........
r59639 | crichter | 2007-04-02 14:08:12 +0200 (Mo, 02 Apr 2007) | 1 line
added option which allows us to accept incoming SETUP Messages without automatically sending Proceeding or Setup Acknowledge, this is useful with some broken switches and if you want to Release incoming calls without previously having acknowledged them. The new option is noautorespond_on_setup=yes|no default is no, so we don't break the existing behaviour
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@64954 65c4cc65-6c06-0410-ace0-fbb531ad65f3
