Separate "name" into "classname" and "name".
Use '.' for classname separator instead of '/'.
Prefix reserved words with '_'.
Wrap output with a top-level "testsuites" element.
Change-Id: Iec1a985eba1c478e5c1d65d5dfd95cb708442099
A new option 'suppress_q850_reason_headers' has been added to the
endpoint object. Some devices can't accept multiple Reason headers and
get confused when both 'SIP' and 'Q.850' Reason headers are received.
This option allows the 'Q.850' Reason header to be suppressed.
The default value is 'no'.
ASTERISK-27949
Reported-by: Ross Beer
Change-Id: I54cf37a827d77de2079256bb3de7e90fa5e1deb1
When negotiating an incoming T.38 stream the code incorrectly
returned failure instead of a decline for the stream when a
problem occurred or the configuration didn't allow it. This
resulted in SDP offers being rejected with a 488 response
in all cases, even when another valid stream was present.
This change makes it so the stream is now declined. If no
streams are accepted a 488 response is sent while if at least
one stream is accepted all the declined streams are, well,
declined.
ASTERISK-27763
Change-Id: I88bcf793788c412a9839d111a5c736bf6867807c
We were blindly responding with AST_T38_REFUSED when ANY T.38 control
frame came accross the bridge. This causes T.38 Gateway to get confused
and the T.38 session to get in a strange state.
* Made the T.38 framehook only respond to request frames and ignore
response frames.
ASTERISK-27657
ASTERISK-27080
Change-Id: I5fb5967c7d1efb30a7ff375f82887ca82a55b05b
Using the keep_alive_interval option can result in a deadlock between the
pjproject transport manager group lock and the monitored transports ao2
container lock. The pjproject transport manager group lock has to be
superior in the locking order to the monitored transports ao2 container
lock because of pjproject callbacks called when already holding the group
lock. The lock inversion happens when Asterisk attempts to send a keep
alive packet over the reliable transports.
* Made keepalive_transport_thread() iterate over the monitored transports
container rather than use the ao2_callback() method. This avoids holding
the container lock when sending the keep alive packet.
ASTERISK-26686
Change-Id: I5d5392a52e698bbe41a93f7d8e92bf0e61fe3951
The Websocket transport uses the built-in HTTP server. As a result
the TLS configuration is done in http.conf and not in pjsip.conf.
This change adds a warning if this is configured in pjsip.conf and
also clarifies in the sample configuration file.
Change-Id: I187d994d328c3ed274b6754fd4c2a4955bdc6dd9
If we initiated a T.38 reINVITE, we would crash if we received any other
1xx response message except 100 if it were followed by a 200 response.
* Made ignore any 1xx response so we do not close out the T.38 negotiation
too early. For good measure we'll now accept any 2xx response as
acceptance of the reINVITE T.38 offer.
ASTERISK-27944
Change-Id: I0ca88aae708d091db7335af73f41035a212adff4
Incoming publications need to ensure that the module remains
loaded for the lifetime of them. This is now done by holding
a reference to the module while the publication exists. This
mirrors that of inbound subscriptions.
ASTERISK-27783
Change-Id: Ia98c95a15e11af25728d5fb3e56e12cda0cfc7c0
If a conference is ended very quickly after it was created (i.e., the
first user immediately hangs up) then the conference bridge and announcer
channels are not removed.
When a conference is created, the push_announcer() function is added to
the playback queue task processor and the conference object reference is
bumped. If a conference is ended while the push_announcer() function is
still going then the ao2_cleanup(conference) at the end of
push_announcer() will call the destructor function -
destroy_conference_bridge().
The destroy_conference_bridge() function will then add the
hangup_playback() task to the playback queue and will wait for it to end.
Since it is already a current task of the playback queue it will wait
forever.
This patch makes the conference thread call push_announcer() directly.
This way the conference object reference bump is not needed. Since the
playback queue task processor is only used by the conference thread
itself, there is no danger of trying to play announcements before the
announcer is pushed to the bridge.
ASTERISK-27870 #close
Change-Id: I947a50fb121422d90fd1816d643a54d75185a477
There is a rare case (do to the infrequent timing involved) where
CDR submission threads in batch mode can deadlock with a currently
running CDR batch process. This patch should remove the need for
holding the lock in the scheduler and should clean a few code
paths up that inconsistently submitted new work to the CDR batch
processor.
ASTERISK-27909
Change-Id: I6333e865db7c593c102c2fd948cecdb96481974d
Reported-by: Denis Lebedev
Destroy scheduler after peers are pruned to stop dundi crashing when
unloading module.
ASTERISK-26987
Reported-by: Kirsty Tyerman
Change-Id: Ic12e562cd90d8d813a9e97f302045091f59e3c05
The AMI action was directly sending the text to the channel driver.
However, this makes two threads attempt to handle media and runs afowl of
CHECK_BLOCKING.
* Queue a read action to make the channel's media handling thread actually
send the text message. This changes the AMI actions success/fail response
to just mean the text was queued to be sent not that the text actually got
sent. The channel driver may not even support sending text messages.
ASTERISK-27943
Change-Id: I9dce343d8fa634ba5a416a1326d8a6340f98c379
In addition to text/* content types, incoming_in_dialog_request now
accepts application/* content types.
Also fixed a length issue when copying the body text. It was one
character short.
ASTERISK-27942
Change-Id: I4e54d8cc6158dc47eb8fdd6ba0108c6fd53f2818
With the participant info code in app_confbridge, we were still
in the process of adding the channel to the bridge when trying to send
an in-dialog MESSAGE. This caused 2 threads to grab the channel
blocking flag at the same time. To mitigate this, the participant
info code was moved to confbridge_manager so it runs after all
channel/bridge actions have finished.
Change-Id: I228806ac153074f45e0b35d5236166e92e132abd
pjproject by default currently will follow media forked during an INVITE
on outbound calls if the To tag is different on a subsequent response as
that on an earlier response. We handle this correctly. There have
been reported cases where the To tag is the same but we still need to
follow the media. The pjproject patch in this commit adds the
capability to sip_inv and also adds the capability to control it at
runtime. The original "different tag" behavior was always controllable
at runtime but we never did anything with it and left it to default to
TRUE.
So, along with the pjproject patch, this commit adds options to both the
system and endpoint objects to control the two behaviors, and a small
logic change to session_inv_on_media_update in res_pjsip_session to
control the behavior at the endpoint level.
The default behavior for "different tags" remains the same at TRUE and
the default for "same tag" is FALSE.
Change-Id: I64d071942b79adb2f0a4e13137389b19404fe3d6
ASTERISK-27936
Reported-by: Ross Beer
Add predial handler support to app_queue. app_dial (ASTERISK_19548) and
app_originate (ASTERISK_26587) have the ability to execute predial
handlers on caller and callee channels. This patch adds predial handlers
to app_queue and uses the same options as Dial and Originate (b and B).
The caller routine gets executed when the caller first enters the queue.
The callee routine gets executed for each queue member when they are about
to be called.
ASTERISK-27912
Change-Id: I5acf5c32587ee008658d12e8a8049eb8fa4d0f24
* Fix several instances where we were bumping a ref in the parameter and
then unrefing the object if it failed. The way the AST_VECTOR_APPEND()
and AST_VECTOR_REPLACE() macros are implemented means if it fails the new
value was never evaluated.
Change-Id: I2847872a455b11ea7e5b7ce697c0a455a1d0ac9a
* changes:
channel.c: Make CHECK_BLOCKING() save thread LWP id for messages.
channel.c: Fix usage of CHECK_BLOCKING()
autoservice: Don't start channel autoservice if the thread is a user interface.
The symbol FS is the sampling frequency. That symbol is not used in Asterisk at
all and was a copy-and-paste of the iLBC reference code from the IETF RFC.
However, in Solaris, that symbol is defined by another header already. To
compile in Solaris, that symbol has to go.
Change-Id: I91ddbe5be7c00069c3a25abd5f58d7b2f04c51b1
With ./configure --enable-dev-mode[=noisy], the build fails because every
warning gets an error. Therefore, Asterisk has to be free of warnings and this
variable must go.
Change-Id: I63dd2bc4833b9bdb04602f83422d16caf289d46a
George Joseph
Joshua Colp
Jenkins2
Richard Mudgett
Alexander Traud
Robert Mordec
Matthew Fredrickson
Kirsty Tyerman
Kevin Harwell
Kristian F. Høgh