When extracting timestamps that are parsed, time stamp values that are not set
(time values of 0.000000) should not actually result in a parsed string. The
value should be skipped, and the result of the CDR function should be an
empty string.
Prior to this patch, the result was fed to the time formatting, which would
result in an output of a date/time in 1969.
........
Merged revisions 407747 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407748 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In https://reviewboard.asterisk.org/r/3057/, applications and functions that
manipulate CDRs were made to interact over Stasis. This was done to
synchronize manipulations of CDRs from the dialplan with the updates the
engine itself receives over the message bus.
This change rested on a faulty premise: that messages published to the CDR
topic or to a topic that forwards to the CDR topic are synchronized with the
messages handled by the CDR topic subscription in the CDR engine. This is not
the case. There is no ordering guaranteed for two messages published to the
same topic; ordering is only guaranteed if a message is published to the same
subscriber.
Stasis was modified in r405311 to allow a publisher to synchronize on the
subscriber. This patch uses that API to synchronize the CDR publishers with
the CDR engine message router, which maintains the overall topic subscription.
(closes issue ASTERISK-22884)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3099/
........
Merged revisions 405312 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405314 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When doing the rework of the CDR engine that pushed all of the logic into cdr.c
and made it respond to changes in channel state over Stasis, we knew that
accessing the CDR engine from the dialplan would be "slightly"
non-deterministic. Dialplan threads would be accessing CDRs while Stasis
threads would be updating the state of said CDRs - whereas in the past,
everything happened on the dialplan threads. Tests have shown that "slightly"
is in reality "very".
This patch synchronizes things by making the dialplan applications/functions
that manipulate CDRs do so over Stasis. ForkCDR, NoCDR, ResetCDR, CDR, and
CDR_PROP now all use Stasis to send their requests over to the CDR engine,
and synchronize on the channel Stasis topic via a subscription so that they
return their values/control to the dialplan at the appropriate time.
While going through this, the following changes were also made:
* DISA, which can reset the CDR when a user successfully authenticates, now
just uses the ResetCDR app to do this. This prevents having to duplicate
the same Stasis synchronization logic in that application.
* Answer no longer disables CDRs. It actually didn't work anyway - calling
DISABLE on the channel's CDR doesn't stop the CDR from getting the Answer
time - it just kills all CDRs on that channel, which isn't what the caller
would intend.
(closes issue ASTERISK-22884)
(closes issue ASTERISK-22886)
Review: https://reviewboard.asterisk.org/r/3057/
........
Merged revisions 404294 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404295 65c4cc65-6c06-0410-ace0-fbb531ad65f3
I can only blame this on a bad merge, because this in no way worked properly
the way it was written. Mea culpa. The function should now parse its arguments
correctly and function properly. (Note that the API used by the CDR_PROP
function has working unit tests... this was merely bad coding of the actual
registered function)
(closes issue ASTERISK-22613)
Reported by: Private Name
........
Merged revisions 400196 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400197 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Made ast_strftime_locale() ensure that the output buffer is initialized.
The std library strftime() returns 0 and does not touch the buffer if it
has an error. However, the function can also return 0 without an error.
(closes issue ASTERISK-22412)
Reported by: rmudgett
........
Merged revisions 397902 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397903 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When func_cdr is used for variable substitution, there is no channel name
and hence no run-time information available for CDR variable substitution.
In that case, the correct thing to do is to use the CDR object on the channel
passed to the function. This patch checks to see if the channel passed in
has a name - if not, it uses ast_cdr_format_var instead of ast_cdr_get_var.
This allows CDR backends to continue to use variable substitution in order to
resolve ast_cdr object properties.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392214 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The type of tv_usec is suseconds_t. On Linux, this is usually a long int, but
the specification is actually pretty lax on what it might actually be. And,
sadly, there's no printf/scanf width specifier for suseconds_t. So it could
bit an int or a long, but there's not a great way to tell which it is.
This patch fixes scanf by reading into a long temporary variable that's then
stored into the tv_usec. It fixes printf by casting the tv_usec to a long
first.
This patch also adds some missing width specifiers for some debug statements,
which would cause ".000001" to be displayed at ".1".
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392076 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is the initial push to update Asterisk's CDR engine for the new
bridging framework. This patch guts the existing CDR engine and builds the new
on top of messages coming across Stasis. As changes in channel state and bridge
state are detected, CDRs are built and dispatched accordingly. This
fundamentally changes CDRs in a few ways.
(1) CDRs are now *very* reflective of the actual state of channels and bridges.
This means CDRs track well with what an actual channel is doing - which
is useful in transfer scenarios (which were previously difficult to pin
down). It does, however, mean that CDRs cannot be 'fooled'. Previous
behavior in Asterisk allowed for CDR applications, channels, and other
properties to be spoofed in parts of the code - this no longer works.
(2) CDRs have defined behavior in multi-party scenarios. This behavior will not
be what everyone wants, but it is a defined behavior and as such, it is
predictable.
(3) The CDR manipulation functions and applications have been overhauled. Major
changes have been made to ResetCDR and ForkCDR in particular. Many of the
options for these two applications no longer made any sense with the new
framework and the (slightly) more immutable nature of CDRs.
There are a plethora of other changes. For a full description of CDR behavior,
see the CDR specification on the Asterisk wiki.
(closes issue ASTERISK-21196)
Review: https://reviewboard.asterisk.org/r/2486/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391947 65c4cc65-6c06-0410-ace0-fbb531ad65f3
People expressed an interest in having access to the exact length of calls to a finer degree than seconds. See the CHANGES and UPGRADE.txt for usage also updated the sample configs to note the change.
Patch by snuffy.
(closes issue #16559)
Reported by: cianmaher
Tested by: cianmaher, snuffy
Review: https://reviewboard.asterisk.org/r/461/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@269153 65c4cc65-6c06-0410-ace0-fbb531ad65f3
CEL is the new system for logging channel events. This was inspired after
facing many problems trying to represent what is possible to happen to a call
in Asterisk using CDR records. For more information on CEL, see the built in
HTML or PDF documentation generated from the files in doc/tex/.
Many thanks to Steve Murphy (murf) and Brian Degenhardt (bmd) for their hard
work developing this code. Also, thanks to Matt Nicholson (mnicholson) and
Sean Bright (seanbright) for their assistance in the final push to get this
code ready for Asterisk trunk.
Review: https://reviewboard.asterisk.org/r/239/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@203638 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit introduces the first phase of an effort to manage documentation of the
interfaces in Asterisk in an XML format. Currently, a new format is available for
applications and dialplan functions. A good number of conversions to the new format
are also included.
For more information, see the following message to asterisk-dev:
http://lists.digium.com/pipermail/asterisk-dev/2008-October/034968.html
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@153365 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r146799 | tilghman | 2008-10-06 15:52:04 -0500 (Mon, 06 Oct 2008) | 8 lines
Dialplan functions should not actually return 0, unless they have modified the
workspace. To signal an error (and no change to the workspace), -1 should be
returned instead.
(closes issue #13340)
Reported by: kryptolus
Patches:
20080827__bug13340__2.diff.txt uploaded by Corydon76 (license 14)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@146802 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r122046 | murf | 2008-06-12 07:47:34 -0600 (Thu, 12 Jun 2008) | 37 lines
(closes issue #10668)
Reported by: arkadia
Tested by: murf, arkadia
Options added to forkCDR() app and the CDR() func to
remove some roadblocks for CDR applications.
The "show application ForkCDR" output was upgraded
to more fully explain the inner workings of forkCDR.
The A option was added to forkCDR to force the
CDR system to NOT change the disposition on the
original CDR, after the fork. This involves
ast_cdr_answer, _busy, _failed, and so on.
The T option was added to forkCDR to force
obedience of the cdr LOCKED flag in the
ast_cdr_end, all the disposition changing
funcs (ast_cdr_answer, etc), and in the
ast_cdr_setvar func.
The CHANGES file was updated to explain ALL
the new options added to satisfy this bug report
(and some requests made verbally and via
email, irc, etc, over the past months/year)
The 's' option was added to the CDR() func,
to force it to skip LOCKED cdr's in the
chain.
Again, the new options should be totally transparent
to existing apps! Current behavior of CDR,
forkCDR, and the rest of the CDR system should
not change one little bit. Until you add the
new options, at least!
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@122091 65c4cc65-6c06-0410-ace0-fbb531ad65f3
build times - tested, there is no measureable difference before and
after this commit.
In this change:
use asterisk/compat.h to include a small set of system headers:
inttypes.h, unistd.h, stddef.h, stddint.h, sys/types.h, stdarg.h,
stdlib.h, alloca.h, stdio.h
Where available, the inclusion is conditional on HAVE_FOO_H as determined
by autoconf.
Normally, source files should not include any of the above system headers,
and instead use either "asterisk.h" or "asterisk/compat.h" which does it
better.
For the time being I have left alone second-level directories
(main/db1-ast, etc.).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89333 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r61681 | tilghman | 2007-04-18 21:45:05 -0500 (Wed, 18 Apr 2007) | 13 lines
Merged revisions 61680 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r61680 | tilghman | 2007-04-18 21:30:18 -0500 (Wed, 18 Apr 2007) | 5 lines
Bug 9557 - Specifying the GetVar AMI action without a Channel parameter can
cause Asterisk to crash. The reason this needs to be fixed in the functions
instead of in AMI is because Channel can legitimately be NULL, such as when
retrieving global variables.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@61682 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- restructured build tree and makefiles to eliminate recursion problems
- support for embedded modules
- support for static builds
- simpler cross-compilation support
- simpler module/loader interface (no exported symbols)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@40722 65c4cc65-6c06-0410-ace0-fbb531ad65f3
As partly documented in loader.c and include/asterisk/module.h,
modules are now expected to return all of their methods and flags
into a structure 'mod_data', and are normally loaded with RTLD_NOW
| RTLD_LOCAL, so symbols are resolved immediately and conflicts
should be less likely. Only in a small number of cases (res_*,
typically) modules are loaded RTLD_GLOBAL, so they can export
symbols.
The core of the change is only the two files loader.c and
include/asterisk/module.h, all the rest is simply adaptation of the
existing modules to the new API, a rather mechanical (but believe
me, time and finger-consuming!) process whose detail you can figure
out by svn diff'ing any single module.
Expect some minor compilation issue after this change, please
report it on mantis http://bugs.digium.com/view.php?id=6968
so we collect all the feedback in one place.
I am just sorry that this change missed SVN version number 20000!
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@20003 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Corey Farrell
Matthew Jordan
Richard Mudgett
David M. Lee
Jonathan Rose
Terry Wilson
Leif Madsen
Bradley Latus
Tilghman Lesher
Mark Michelson
Matthew Nicholson
Russell Bryant
Kevin P. Fleming
Steve Murphy
Jason Parker
Luigi Rizzo
Olle Johansson
Joshua Colp
Matt O'Gorman