If ast_stun_request() receives packets other than a STUN response then we
could conceivably never exit if we continue to receive packets with less
than three seconds between them.
* Fix poll timeout to keep track of the time when we sent the STUN
request. We will now send a STUN request every three seconds regardless
of how many other packets we receive while waiting for a response until we
have completed three STUN request transmission cycles.
Change-Id: Ib606cb08585e06eb50877f67b8d3bd385a85c266
Return early if ast_sorcery_retrieve_by_id() is not passed an id to find.
Also eliminated the RAII_VAR() usage in the function.
Change-Id: I871dbe162a301b5ced8b4393cec27180c7c6b218
ast_cdr_setuserfield wrote to a fixed length field using strcpy. This could
result in a buffer overrun when called from chan_sip or func_cdr. This patch
adds a maximum bytes written to the field by using ast_copy_string instead.
ASTERISK-26897 #close
patches:
0001-CDR-Protect-from-data-overflow-in-ast_cdr_setuserfie.patch submitted
by Corey Farrell (license #5909)
Change-Id: Ib23ca77e9b9e2803a450e1206af45df2d2fdf65c
If DESTDIR is set, don't call ldconfig. Assume that DESTDIR is used to
create a binary archive. The ldconfig call should be delegated to the
archive postinst script. This fixes the case where fakeroot wraps 'make
install' causing $EUID to be 0 even though it doesn't have permission to
call ldconfig.
The previous logic in configure.ac to detect and correct libdir
has been removed as it was not completely accurate. CentOS 64-bit
users should again specifiy --libdir=/usr/lib64 when configuring
to prevent install to /usr/lib.
Updated Makefile:check-old-libdir to check for orphans in
lib64 when installing to lib as well as orphans in lib when installing
to lib64.
Updated Makefile and main/Makefile uninstall targets to remove the
orphans using the new logic.
ASTERISK-26705
Change-Id: I51739d4a03e60bff38be719b8d2ead0007afdd51
This change cleans up state management for media streams by moving
RTP instances into their own session structure and adding additional
details that are not relevant to the core (such as connection address).
These can live either in the local capabilities or joint capabilities.
The ability to set explicit connection address information for
the purposes of direct media and NAT has also been added at the
global and stream specific level.
ASTERISK-26900
Change-Id: If7e5307239a9534420732de11c451a2705b6b681
The ao2_global_obj_release() function holds an exclusive lock on the
global object while it is being dereferenced. Any destructors that
run during this time that call ao2_global_obj_ref() will deadlock
because a read lock is required.
Instead, we make the global object inaccessible inside of the write
lock and only dereference it once we have released the lock. This
allows the affected destructors to fail gracefully.
While this doesn't completely solve the referenced issue (the error
message about not being able to create an IQ continues to be shown)
it does solve the backtrace spew that accompanied it.
ASTERISK-21009 #close
Reported by: Marcello Ceschia
Change-Id: Idf40ae136b5070dba22cb576ea8414fbc9939385
This change removes the old epoll support which has not been used or
maintained in quite some time.
The fixed number of file descriptors on a channel has also been removed.
File descriptors are now contained in a growable vector. This can be
used like before by specifying a specific position to store a file
descriptor at or using a new API call, ast_channel_fd_add, which adds
a file descriptor to the channel and returns its position.
Tests have been added which cover the growing behavior of the vector
and the new API call.
ASTERISK-26885
Change-Id: I1a754b506c009b83dfdeeb08c2d2815db30ef928
Dynamic payload types were statically defined in Asterisk. This unfortunately
limited the number of dynamic payloads that could be registered. With this patch
dynamic payload type numbers are now assigned dynamically and per RTP instance.
However, in order to limit any issues where some clients expect the old
statically defined value this patch makes it so the value Asterisk used to pre-
designate is used for the dynamic assignment if available.
An option, "rtp_use_dynamic", has also been added (can be set in asterisk.conf)
that turns the new dynamic behavior on or off. When off it reverts back to using
statically defined payload values. This option defaults to "yes" in Asterisk 15.
ASTERISK-26515 #close
patches:
ASTERISK-26515.diff submitted by jcolp (license 5000
Change-Id: I7653465c5ebeaf968f1a1cc8f3f4f5c4321da7fc
The CDR code previously did not allow the user field to be set
from the 'h' extension in the dialplan. This change removes that
limitation and allows it to be set.
ASTERISK-26818
Change-Id: I0fed8a79b5e408bac4e30542b8f33a61c5ed9aa6
We aren't validating that the URI we just parsed is a SIP/SIPS one before
trying to access the user, host, and port members of a possibly uninitialized
structure.
Also update the MessageSend documentation to indicate what 'from' formats are
accepted.
ASTERISK-26484 #close
Reported by: Vinod Dharashive
Change-Id: I476b5cc5f18a7713d0ee945374f2a1c164857d30
Fixed a bug in function "ast_audiohook_write_frame" that checked the
variable other_factory_samples and only flushed the factories, so they
would be in sync, when other_factory_samples > 0. When there is not any
rtp incoming the variable other_factory_samples will be 0, and although
the result of "our_factory_ms - other_factory_ms" may be very large,
this led to the record file not syncing.
ASTERISK-26875 #close
Reported-by: Aaron An
Tested-by: Aaron An
Change-Id: Ia4d890fb8fc1636a7188502bab35f555685aea22
POSIX does not require getprotobyname() to be thread safe and some
implementations use static memory which causes issues when multiple
threads are used.
Further, our usage of it today is just to ultimately get IPPROTO_TCP
for calls to setsockopt(). So instead we just use IPPROTO_TCP directly.
Change-Id: I2e14e58674808f7ce99b2f5e900d0f90d0d8da48
Dereferencing struct ast_autochan.chan without first calling
ast_autochan_channel_lock() is unsafe because the pointer could change at
any time due to a masquerade. Unfortunately, ast_autochan_channel_lock()
itself uses struct ast_autochan.chan unsafely and can result in a deadlock
if the original channel happens to get destroyed after a masquerade in
addition to the pointer getting changed.
The problem is more likely to happen with v11 and earlier because
masquerades are used to optimize out local channels on those versions.
However, it could still happen on newer versions if the channel is
executing a dialplan application when the channel is transferred or
redirected. In this situation a masquerade still must be used.
* Added a lock to struct ast_autochan to safely be able to use
ast_autochan.chan while trying to get the channel lock in
ast_autochan_channel_lock(). The locking order is the channel lock then
the autochan lock. Locking in the other direction requires deadlock
avoidance.
* Fix unsafe ast_autochan.chan usages in app_mixmonitor.c.
* Fix unsafe ast_autochan.chan usages in app_chanspy.c.
* app_chanspy.c: Removed unused autochan parameter from next_channel().
ASTERISK-26867
Change-Id: Id29dd22bc0f369b44e23ca423d2f3657187cc592
Forgetting to indicate an exten is a pattern can cause a crash if the
"pattern" has a character set range. e.g., "9999[3-5]" The crash is due
to a buffer overwrite because the '-' exten eye-candy wasn't removed as
expected and overran the allocated space.
The buffer overwrite is fixed two ways in this patch.
1) Fix ext_strncpy() to distinguish between pattern and non-pattern
extens. Now '-' characters are removed when they are eye-candy and not
when they are part of a pattern character set. Since the function is
private to pbx.c, the return value now returns the number of bytes written
to the destination buffer instead of the strlen() of the final buffer so
the callers that care don't need to add one.
2) Fix callers to ext_strncpy() to supply the correct available buffer
size of the destination buffer.
ASTERISK-26668
Change-Id: I555d97411140e47e0522684062d174fbe32aa84a
* Added additional fields to ast_sdp_options.
* Re-organized ast_sdp.
* Updated field names to correspond to RFC4566 terminology.
* Created allocs/frees for SDP children.
* Created getters/setters for SDP children where appropriate.
* Added ast_sdp_create_from_state.
* Refactored res_sdp_translator_pjmedia for changes.
Change-Id: Iefbd877af7f5a4d3c74deead1bff8802661b0d48
This patch demotes the ERROR message that is displayed when a
nonexistent item is removed from the Stasis cache. The genesis of this
demotion is due to chan_sip's realtime peers and their interaction with
Asterisk's core ast_endpoint code, but ostensibly it could happen from
other channel drivers as well.
Since Mark Michelson already did an excellent job of explaining on this
issue, it is quoted here for posterity:
"Internally, when a realtime peer is retrieved, Asterisk creates an
ast_endpoint structure. When that peer is destroyed, the ast_endpoint is
destroyed as well. Part of the destruction of the ast_endpoint involves
clearing the Stasis cache of all information about that endpoint. The
problem here is that the act of creating the ast_endpoint is not enough
to actually put any information in the Stasis cache. Instead, something
has to happen, such as a state change, in order for the Stasis cache to
have any information about that endpoint. When a device registers,
chan_sip creates an ast_endpoint structure, processes the REGISTER, and
then destroys the ast_endpoint. When the ast_endpoint is destroyed,
there is nothing to destroy in the Stasis cache, so an error message is
emitted. When you use rtcachefriends, ast_endpoint structures persist
for the lifetime of the module and so you do not see this error
message."
ASTERISK-25237 #close
Change-Id: I53cebc6b4a897a1ab9564182b75c177780feff70
This change adds a few things to facilitate stream topology changing:
1. Control frame types have been added for use by the channel driver
to notify the application that the channel wants to change the stream
topology or that a stream topology change has been accepted. They are
also used by the indicate interface to the channel that the application
uses to indicate it wants to do the same.
2. Legacy behavior has been adopted in ast_read() such that if a
channel requests a stream topology change it is denied automatically
and the current stream topology is preserved if the application is
not capable of handling streams.
Tests have also been written which confirm the multistream and
non-multistream behavior.
ASTERISK-26839
Change-Id: Ia68ef22bca8e8457265ca4f0f9de600cbcc10bc9
* manager.c:manager_state_cb() Fix potential use of uninitialized hint[]
if a hint does not exist for the requested extension. Ran into this when
developing a testsuite test. The AMI event ExtensionStatus came out with
the hint header value containing garbage. The AMI event PresenceStatus
also had the same issue.
* manager.c:action_extensionstate() no need to completely initialize the
hint[]. Only initialize the first element.
* pbx.c:ast_add_hint() Remove unnecessary assignment.
* chan_sip.c: Eliminate an unneeded hint[] local variable. We only care
about the return value of ast_get_hint() there.
Change-Id: Ia9a8786f01f93f1f917200f0a50bead0319af97b
* Removed the AST_CHAN_TP_MULTISTREAM tech property. We now rely
on read_stream being set to indicate a multi stream channel.
* Added ast_channel_is_multistream convenience function.
* Fixed issue where stream and default_stream weren't being set on
a frame retrieved from the queue.
* Now testing for NULL being returned from the driver's read or
read_stream callback.
* Fixed issue where the dropnondefault code was crashing on a
NULL f.
* Now enforcing that if either read_stream or write_stream are
set when ast_channel_tech_set is called that BOTH are set.
* Added the unit tests.
ASTERISK-26816
Change-Id: If7792b20d782e71e823dabd3124572cf0a4caab2
This introduces and documents the various states in the state machine.
This also introduces API functions that induce state changes, and places
TODO comments telling what needs to be done in addition to what is
already there. Those TODOs will be replaced with real code in upcoming
changes.
Change-Id: I871c0eb480b4c84d83e91ac5628e7a673e8b89ed
In the event that a cache file is removed out from under us, we should
treat the cache entry as stale and force a refresh.
ASTERISK-26774 #close
Reported by: Igor Gamayunov
Change-Id: I3b1bd0c999d59d18664ef73a29823bc5b431dc52
... and clean them both up on uninstall.
We've fixed the issue where 'make install' was installing to
/usr/lib on 64-bit systems that use /usr/lib64. Now we need
to clean up the remnants in /usr/lib.
* 'make install' now prints a warning if DESTDIR/ASTLIBDIR
contains 'lib64' and libasterisk* shared libraries or modules
are also found in DESTDIR/ASTLIBDIR with 'lib64' transformed
to 'lib'.
* 'make uninstall' ALWAYS cleans up both DESTDIR/ASTLIBDIR and
DESTDIR/ASTLIBDIR with 'lib64' transformed to 'lib'.
ASTERISK-26705
Change-Id: I6edddeb3c07a51e7c7ba7cac3c05e4bf3ec3f01f
This change introduces an ast_read_stream function and callback in
the channel technology which allows reading frames from all streams
and not just the default streams.
The stream number has also been added to frames. This is to allow the
case where frames are queued onto the channel instead of being read
directly from the driver.
This change does impose a restriction on reading though: a chain of
frames can only contain frames from the same stream.
ASTERISK-26816
Change-Id: I5d7dc35e86694df91fd025126f6cfe0453aa38ce
On some platforms a multiarch approach is used for libraries.
The build system does not take this into account and still
places libraries into the lib directory if no --libdir is
specified to configure. On initial startup this results in
libasteriskssl.so not being found, as it is not in the multiarch
lib directory. To make matters worse, options were being passed
to ldconfig on both Linux and FreeBSD that actually prevented
the rebuild of the cache.
* Fedora has a /usr/share/config.site that automatically tells
autoconf to use /usr/lib64 but CentOS does not. This logic was
copied to configure.ac and modified so systems like Ubuntu,
which still use /usr/lib for 64-bit systems, aren't affected.
Now that we have them in the correct directory...
In order for the system loader to find libasteriskssl and
libasteriskpj, one of 3 things has to happen...
- The linker cache must be rebuilt including the directory
where the libasterisk* libraries were installed. Only root
can rebuild the cache. This was busted.
- We have to link the asterisk binary with an rpath pointing
to the directrory where the libasterisk* libraries were
installed. This makes things very complicated and will happen
over the collective dead bodies of everyone who's had to
package a distribution with an rpath.
- Finally, you can start asterisk with LD_LIBRARY_PATH set to the
directrory where the libasterisk* libraries were installed.
There are no other options. So...
* The invokation of ldconfig has been moved from main/Makefile
to ASTTOPDIR/Makefile, the options have been removed, and
DESTDIR/ASTLIBDIR appended. If you aren't root, you will be
warned after the "Asterisk Installation Compete" banner that
you must re-run 'make install' as root, manually run
'ldconfig DESTDIR/ASTLIBDIR' as root, or run asterisk with
LD_LIBRARY_PATH.
ASTERISK-26705
Change-Id: I2a64b7c33a7d3e9bde20f47e3d3ab771977af982
This change adds an ast_write_stream function which allows
writing a frame to a specific media stream. It also moves
ast_write() to using this underneath by writing media
frames provided to it to the default streams of the channel.
Existing functionality (such as audiohooks, framehooks, etc)
are limited to being applied to the default stream only.
Unit tests have also been added which test the behavior of
both non-multistream and multistream channels to confirm that
the write() and write_stream() callbacks are invoked
appropriately.
ASTERISK-26793
Change-Id: I4df20d1b65bd4d787fce0b4b478e19d2dfea245c
Adds binaural synthesis to bridge_softmix (via convolution using libfftw3).
Binaural synthesis is conducted at 48kHz.
For a conference, only one spatial representation is rendered.
The default rendering is applied for mono-capable channels.
ASTERISK-26292
Change-Id: Iecdb381b6adc17c961049658678f6219adae1ddf
