This change fixes two issues:
1. During a swap operation bridging added the new channel before having the swap channel
leave. This was not handled in bridge_native_rtp and could result in a channel not getting
reinvited back to Asterisk. After this change the swap channel will leave first and the
new channel will then join.
2. If a re-invite was received after a session had been established any upstream elements
(such as bridge_native_rtp) were not notified that they may want to re-evaluate things.
After this change an UPDATE_RTP_PEER control frame is queued when this situation occurs
and upstream can react.
AST-1524 #close
Review: https://reviewboard.asterisk.org/r/4378/
........
Merged revisions 431157 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431158 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A native rtp bridge was being chosen (it shouldn't have been) when using two
pjsip channels with incompatible DTMF modes. This patch sets the rtp instance
property, AST_RTP_PROPERTY_DTMF, for the appropriate DTMF mode(s) for pjsip.
It was not being set before, meaning all DTMF modes for pjsip were being treated
as compatible, thus native bridging would be chosen as the bridge type when it
shouldn't have been.
ASTERISK-24459 #close
Reported by: Yaniv Simhi
Review: https://reviewboard.asterisk.org/r/4265/
........
Merged revisions 429763 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429764 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change adds an option, moh_passthrough, that when enabled will pass
hold and unhold requests through using a SIP re-invite. When placing on
hold a re-invite with sendonly will be sent and when taking off hold a
re-invite with sendrecv will be sent. This allows remote servers to handle
the musiconhold instead of the local Asterisk instance being responsible.
Review: https://reviewboard.asterisk.org/r/4103/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427112 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch for r425924 introduced a bug, wherein sending an INVITE request
with no SDP would cause Asterisk to not send an SDP Offer in the 200
OK. The current structure of res_pjsip_sdp_rtp is a bit hard to deal with
to fix this, as create_outgoing_sdp has no knowledge of whether or not it is
creating an SDP as a new Offer or an Answer. This is something of an oversight
in the callback definition, as the caller of it does have this information.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425945 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The usage of the local override_prefs variable in create_outgoing_sdp_stream
was previously to track an override format preference set by PJSIP_MEDIA_OFFER.
Now, however, that function simply sets the joint capabilities structure,
session->req_caps. During the media format rework, the override_prefs was
instead used to check if there were any formats in session->req_caps.
However, this usage isn't useful in create_outgoing_sdp_stream.
session->req_caps contains the negotiated formats for *all* streams, not just
the current one being created. Thus, so long as any stream of any type has
provided a format, override_prefs will be non-zero. Hence, its usage in
checking whether or not we should look at the formats on the endpoint or
the joint capabilities is generally useless.
There's only two things useful to check:
(1) Does the endpoint have a format for the media type?
(2) Did we negotiate a format for the media type?
If either of those is a 'no', then we must kill the media stream.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425924 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When an inbound SDP offer is received, Asterisk currently makes a few
incorrection assumptions:
(1) If the offer contains more than a single audio/video stream, Asterisk will
reject the entire stream with a 488. This is an overly strict response;
generally, Asterisk should accept the media streams that it can accept and
decline the others.
(2) If the offer contains a declined media stream, Asterisk will attempt to
process it anyway. This can result in attempting to match format
capabilities on a declined media stream, leading to a 488. Asterisk should
simply ignore declined media streams.
(3) Asterisk will currently attempt to handle offers with AVPF with
use_avpf=No/AVP with use_avpf=Yes. This mismatch results in invalid SDP
answers being sent in response. If there is a mismatch between the media
type being offered and the configuration, Asterisk must reject the offer
with a 488.
This patch does the following:
* Asterisk will accept SDP offers with at least one media stream that it can
use. Some WARNING messages have been dropped to NOTICEs as a result.
* Asterisk will not accept an offer with a media type that doesn't match its
configuration.
* Asterisk will ignore declined media streams properly.
#SIPit31
Review: https://reviewboard.asterisk.org/r/4063/
ASTERISK-24122 #close
Reported by: James Van Vleet
ASTERISK-24381 #close
Reported by: Matt Jordan
........
Merged revisions 425868 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 425879 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425881 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Outgoing PJSIP calls can result in non-negotiated formats listed in the
channel's native formats if video formats are listed in the endpoint's
configuration. The resulting call could then use a non-negotiated format
resulting in one way audio.
* Simplified the update of session->req_caps in set_caps(). Why do
something in five steps when only one is needed?
AFS-162 #close
Review: https://reviewboard.asterisk.org/r/4000/
........
Merged revisions 423561 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423563 65c4cc65-6c06-0410-ace0-fbb531ad65f3
On a SIP reinvite that changes media strams, the PJSIP channel driver was
flooding the log with "Asked to transmit frame type %s, while native
formats is %s" warnings.
* Fixes PJSIP not setting up translation paths when the formats change on
a reinvite. AFS-63 was effectively reintroduced because of the media
formats work. res_pjsip_sdp_rtp.c:set_caps()
* Improved the unexpected frame format WARNING message to include more
information.
* Added protective locking while altering formats on a channel. Reworked
set_format() to simplify and protect the formats under manipulation.
* Restored some code that got lost in the media_formats work.
(channel.c:set_format() and res_pjsip_sdp_rtp.c:set_caps())
AFS-137 #close
Reported by: Mark Michelson
Review: https://reviewboard.asterisk.org/r/3906/
........
Merged revisions 421645 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421646 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
res_rtp_asterisk: Add SHA-256 support for DTLS and perform DTLS negotiation on RTCP.
This change fixes up DTLS support in res_rtp_asterisk so it can accept and provide
a SHA-256 fingerprint, so it occurs on RTCP, and so it occurs after ICE negotiation
completes. Configuration options to chan_sip and chan_pjsip have also been added to
allow behavior to be tweaked (such as forcing the AVP type media transports in SDP).
ASTERISK-22961 #close
Reported by: Jay Jideliov
Review: https://reviewboard.asterisk.org/r/3679/
Review: https://reviewboard.asterisk.org/r/3686/
........
Merged revisions 417678 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417679 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Currently, there are situations that can occur when using chan_pjsip
and certain dialplan applications (notably ChanSpy()) that can cause
the channel to get no audio with scrolling warnings about format
mismatches. This is caused by a failure to update translation paths on
a mid-call native format update since the raw formats have already
been updated by res_pjsip_sdp_rtp.c in set_caps(). Removing the
premature raw format updates allows the translation paths to be setup
correctly and the raw read and write formats with them.
AFS-63 #close
........
Merged revisions 415342 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@415343 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change fixes a bug where if an SDP with media address and sendonly was
received twice the underlying call would go off hold, instead of remaining on hold.
This occured because the code did not properly take into account that the SDP
may contain both a valid media address and the sendonly attribute.
The code now examines the sendonly attribute and media address first, so if the
SDP is received again no change will occur.
ASTERISK-23558 #comment Reported by: John Bigelow
Review: https://reviewboard.asterisk.org/r/3472/
........
Merged revisions 413119 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@413120 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The setting 'use_ptime' is supposed to tell Asterisk to honour the ptime
attribute in an offer, preferring it to whatever packetization
preferences have been set internally. Currently, however, something
rather quirky will happen:
(1) The SDP answer will be constructed in create_outgoing_sdp_stream.
This will use the preferences from the endpoint, such that the 200 OK
response will add the packetization preferences from the endpoint, and
not what was offered.
(2) When the 200 response is issued, apply_negotiated_sdp_stream is called.
This will call apply_packetization, which will use the ptime attribute
from the offer internally.
We end up telling the offerer to use the internal ptime attribute, but we end
up using the offered ptime attribute. Hilarity ensues.
This patch modifies the behaviour by calling apply_packetization from
negotiate_incoming_sdp_stream, which is called prior to
create_outgoing_sdp_stream. This causes the format preferences on the
session's media object to be set to the inbound ptime value (if 'use_ptime'
is enabled), such that the construction of the answer gets the right value
immediately.
Review: https://reviewboard.asterisk.org/r/3244/
........
Merged revisions 408999 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@409000 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change adds improvements to support for allow=all in
pjsip.conf so that it functions as intended. Previously,
the allow/disallow socery configuration would set & clear
codecs from the media.codecs and media.prefs list, but if
all was specified the prefs list was not updated. Then a
call would fail when create_outgoing_sdp_stream() created
an SDP with no audio codecs.
A new function ast_codec_pref_append_all() is provided to
add all codecs to the prefs list - only those not already
on the list. This enables the configuration to specify a
codec preference, but still add all codecs, and even then
remove some codecs, as shown in this example:
allow = ulaw, alaw, all, !g729, !g723
Also, the display order of allow in cli output is updated
to match the configuration by using prefs instead of caps
when generating a human readable string.
Finally, a change to create_outgoing_sdp_stream() skips a
codec when it does not have a payload code instead of the
call failing.
(closes issue ASTERISK-23018)
Reported by: xrobau
Review: https://reviewboard.asterisk.org/r/3131/
........
Merged revisions 405875 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405876 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Depending on configuration it was possible for a media stream to be
created without any media formats. The produced SDP would fail internal
validation and cause a crash.
The code will now no longer add media streams with no formats to the SDP,
allowing it to pass validation and work.
(closes issue ASTERISK-22858)
Reported by: Anthony Messina
........
Merged revisions 403223 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403224 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In PJMEDIA, pjmedia_sdp_rtpmap_to_attr will attempt to use the string
rtpmap.param regardless of its length value. Simply setting the length to 0
does not prevent the garbage on the stack in rtpmap.param.ptr from being
formatted in a sprintf call. This patch initializes the string to NULL so that
at the very least, something is provided to the function that is predictable.
........
Merged revisions 402941 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402943 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Channel snapshots have string representations of the channel's native formats.
Prior to this change, the format strings were re-created on ever channel snapshot
creation. Since channel native formats rarely change, this was very wasteful.
Now, string representations of formats may optionally be stored on the ast_format_cap
for cases where string representations may be requested frequently. When formats
are altered, the string cache is marked as invalid. When strings are requested, the
cache validity is checked. If the cache is valid, then the cached strings are copied.
If the cache is invalid, then the string cache is rebuilt and copied, and the cache
is marked as being valid again.
Review: https://reviewboard.asterisk.org/r/2879
........
Merged revisions 400356 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400363 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The callback function for changing the media address in streams wrongly assumes that a connection line
will always be present. This is false as no line is present if a stream has been rejected.
(closes issue ASTERISK-22645)
Reported by: Rusty Newton
........
Merged revisions 400360 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400361 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The endpoint option does not apply to communication with external entities. Rather,
the option is applied to all communications with the endpoint. The external_media_address
transport configuration option may override the endpoint option if it turns out that
we are going to be communicating with an external entity.
Two things of note:
1) I have not updated the XML documentation. This is being taken care of by Rusty as part
of his work on issue ASTERISK-22405
2) This commit is likely to cause testsuite failures since there are tests that use the
external_media_address endpoint option, and they will need to be changed over. Well, I'm
planning to get that updated ASAP after this commit.
(closes issue ASTERISK-22528)
reported by Rusty Newton
........
Merged revisions 399283 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399284 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds pass through support for Opus and VP8. That includes:
* Format attribute negotiation for Opus. Note that unlike some other codecs,
the draft RFC specifies having spaces delimiting the attributes in addition
to ';', so you have "attra=X; attrb=Y". This broke the attribute parsing in
chan_sip, so a small tweak was also included in this patch for that.
* A format attribute negotiation module for Opus, res_format_attr_opus
* Fast picture update for VP8. Since VP8 uses a different RTCP packet number
than FIR, this really is specific to VP8 at this time.
Note that the format attribute negotiation in res_pjsip_sdp_rtp was written
by mjordan. The rest of this patch was written completely by Lorenzo Miniero.
Review: https://reviewboard.asterisk.org/r/2723/
(closes issue ASTERISK-21981)
Reported by: Tzafrir Cohen
patches:
asterisk_opus+vp8_passthrough_20130718.patch uploaded by lminiero (License 6518)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397526 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The general gist is to have a clear boundary between old SIP stuff
and new SIP stuff by having the word "SIP" for old stuff and "PJSIP"
for new stuff. Here's a brief rundown of the changes:
* The word "Gulp" in dialstrings, functions, and CLI commands is now
"PJSIP"
* chan_gulp.c is now chan_pjsip.c
* Function names in chan_gulp.c that were "gulp_*" are now "chan_pjsip_*"
* All files that were "res_sip*" are now "res_pjsip*"
* The "res_sip" directory is now "res_pjsip"
* Files in the "res_pjsip" directory that began with "sip_*" are now "pjsip_*"
* The configuration file is now "pjsip.conf" instead of "res_sip.conf"
* The module info for all PJSIP-related files now uses "PJSIP" instead of "SIP"
* CLI and AMI commands created by Asterisk's PJSIP modules now have "pjsip" as
the starting word instead of "sip"
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395764 65c4cc65-6c06-0410-ace0-fbb531ad65f3