This patch is the initial push to update Asterisk's CDR engine for the new
bridging framework. This patch guts the existing CDR engine and builds the new
on top of messages coming across Stasis. As changes in channel state and bridge
state are detected, CDRs are built and dispatched accordingly. This
fundamentally changes CDRs in a few ways.
(1) CDRs are now *very* reflective of the actual state of channels and bridges.
This means CDRs track well with what an actual channel is doing - which
is useful in transfer scenarios (which were previously difficult to pin
down). It does, however, mean that CDRs cannot be 'fooled'. Previous
behavior in Asterisk allowed for CDR applications, channels, and other
properties to be spoofed in parts of the code - this no longer works.
(2) CDRs have defined behavior in multi-party scenarios. This behavior will not
be what everyone wants, but it is a defined behavior and as such, it is
predictable.
(3) The CDR manipulation functions and applications have been overhauled. Major
changes have been made to ResetCDR and ForkCDR in particular. Many of the
options for these two applications no longer made any sense with the new
framework and the (slightly) more immutable nature of CDRs.
There are a plethora of other changes. For a full description of CDR behavior,
see the CDR specification on the Asterisk wiki.
(closes issue ASTERISK-21196)
Review: https://reviewboard.asterisk.org/r/2486/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391947 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Remove the "RTP Read too short" warning for RTP keepalives. Remove the
the warning about the application delimiter switch from pipe to comma.
(You should've done this by now.) Make cdr_odbc report more when an
insert fails. Make chan_sip warn less when the peer wants SRTP (and we
don't) or sends a zero port to disable a media type.
Review: https://reviewboard.asterisk.org/r/2167
(closes issue ASTERISK-20538)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375137 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Update and extend the configuration_file group and enable linking. Update title that was left behind many years ago.
(issue ASTERISK-20259)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375005 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Doxygen updates including mistakes, misspellings, missing parameters, updates for Doxygen style. Some missing txt file links are removed but their content or essense will be included in some later updates. A majority of the txt files were removed in the 1.6 era but never noted. The HR and EXTREF are simple changes that make the documentation more compatable with more versions of Doxygen.
Further updates coming.
(issue ASTERISK-20259)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373330 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The reporter was uable to use varchar utf8_unicode_ci with cdr_adaptive_odbc, so
this patch adds those along with some other character types to the list of types
cdr_adaptive_odbc will work using the varchar conditions. The problem wasn't really
UTF8 characters as much as it was a failure to respond to the exact type that was
declared/in use on that database.
(closes issue ASTERISK-19334)
Reported By: Igor Nikolaev
Patches:
cdr_adaptive_odbc.patch uploaded by Igor Nikolaev (license 6236)
........
Merged revisions 357455 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 357458 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357460 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk now supports using ODBC with databases where a single schema must be
selected. Previously, INSERTs would fail because they did not take into
account extra fields cause by having multiple schemas. This also corrects
some SQL resource leaks.
(closes issue ASTERISK-17106)
Patch-by: Alexander Frolkin
Patch-by: Tilgnman Lesher
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353964 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r337974 | rmudgett | 2011-09-26 14:35:23 -0500 (Mon, 26 Sep 2011) | 37 lines
Merged revisions 337973 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r337973 | rmudgett | 2011-09-26 14:30:39 -0500 (Mon, 26 Sep 2011) | 30 lines
Fix deadlock when using dummy channels.
Dummy channels created by ast_dummy_channel_alloc() should be destoyed by
ast_channel_unref(). Using ast_channel_release() needlessly grabs the
channel container lock and can cause a deadlock as a result.
* Analyzed use of ast_dummy_channel_alloc() and made use
ast_channel_unref() when done with the dummy channel. (Primary reason for
the reported deadlock.)
* Made app_dial.c:dial_exec_full() not call ast_call() holding any channel
locks. Chan_local could not perform deadlock avoidance correctly.
(Potential deadlock exposed by this issue. Secondary reason for the
reported deadlock since the held lock was part of the deadlock chain.)
* Fixed some uses of ast_dummy_channel_alloc() not checking the returned
channel pointer for failure.
* Fixed some potential chan=NULL pointer usage in func_odbc.c. Protected
by testing the bogus_chan value.
* Fixed needlessly clearing a 1024 char auto array when setting the first
char to zero is enough in manager.c:action_getvar().
(closes issue ASTERISK-18613)
Reported by: Thomas Arimont
Patches:
jira_asterisk_18613_v1.8.patch (license #5621) patch uploaded by rmudgett
Tested by: Thomas Arimont
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@337975 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r321926 | rmudgett | 2011-06-03 17:09:36 -0500 (Fri, 03 Jun 2011) | 18 lines
Asterisk crash when unloading cdr_radius/cel_radius.
The rc_openlog() API call is passed a string that is used by openlog() to
format log messages. The openlog() does not copy the string it just keeps
a pointer to it. When the module is unloaded, the string is gone from
memory. Depending upon module load order and if the other module then has
an error, a crash happens.
* Pass rc_openlog() a strdup'd string with the understanding that there
will be a small memory leak if the cdr_radius/cel_radius modules are
unloaded.
* Call rc_destroy() to free the rc handle memory when the module is
unloaded.
JIRA AST-483
JIRA SWP-3062
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@321927 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r299131 | tilghman | 2010-12-20 11:47:10 -0600 (Mon, 20 Dec 2010) | 18 lines
Merged revisions 299130 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r299130 | tilghman | 2010-12-20 11:41:24 -0600 (Mon, 20 Dec 2010) | 11 lines
If a call was not answered, then the billsec was calculated unusually large.
Also, due to a copy and paste error, a request for the answer field would have
given the start value, instead.
(closes issue #18460)
Reported by: joscas
Patches:
20101215__issue18460.diff.txt uploaded by tilghman (license 14)
Tested by: joscas
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@299132 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change adds an ERROR message to let you know when a failure exists to
get the columns from the pgsql database, which typically means that the
table does not exist.
(closes issue #17478)
Reported by: kobaz
Patches:
cdr_pgsql.patch uploaded by kobaz (license 834)
Tested by: kobaz, russell, lmadsen
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@275626 65c4cc65-6c06-0410-ace0-fbb531ad65f3
People expressed an interest in having access to the exact length of calls to a finer degree than seconds. See the CHANGES and UPGRADE.txt for usage also updated the sample configs to note the change.
Patch by snuffy.
(closes issue #16559)
Reported by: cianmaher
Tested by: cianmaher, snuffy
Review: https://reviewboard.asterisk.org/r/461/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@269153 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r269006 | seanbright | 2010-06-08 11:28:49 -0400 (Tue, 08 Jun 2010) | 11 lines
Reduce startup time for cdr_tds with large CDR tables.
Since we are just checking for table existence, add a WHERE clause that will
return no rows but will raise an error if the table doesn't exist.
(closes issue #17380)
Reported by: kkwong
Patches:
issue17380-01.patch uploaded by seanbright (license 71)
Tested by: kkwong
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@269007 65c4cc65-6c06-0410-ace0-fbb531ad65f3