A very inappropriate placement of a ')' (introduced in r362151) caused the
maximum size of a file to be set as the result of a comparison operation, as
opposed to the result of the ftello operation. This resulted in seeking being
restricted to the beginning of the file, or 1 byte into the file. Thanks to
the Asterisk Test Suite for properly freaking out about this on at least one
test.
(issue ASTERISK-19655)
Reported by: Matt Jordan
........
Merged revisions 362304 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 362305 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362306 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For the formats that support seek and/or truncate operations, many of
the C library calls used to determine or set the current position indicator
in the file stream were not being checked. In some situations, if an error
occurred, a negative value would be returned from the library call. This
could then be interpreted inappropriately as positional data.
This patch checks the return values from these library calls before
using them in subsequent operations.
(issue ASTERISK-19655)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/1863/
........
Merged revisions 362151 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 362152 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362153 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is the foundation of an entire new way of looking at media in Asterisk.
The code present in this patch is everything required to complete phase1 of my
Media Architecture proposal. For more information about this project visit the link below.
https://wiki.asterisk.org/wiki/display/AST/Media+Architecture+Proposal
The primary function of this patch is to convert all the usages of format
bitfields in Asterisk to use the new format and format_cap APIs. Functionally
no change in behavior should be present in this patch. Thanks to twilson
and russell for all the time they spent reviewing these changes.
Review: https://reviewboard.asterisk.org/r/1083/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306010 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Updated the doxygen \arg line after looking at the file for some other Asterisk documentation
and noticing they weren't up to date. Thanks to seanbright for looking at the code for me :)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@257988 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A recent change to app_voicemail made it such that the module now assumes that
all format modules are available while processing voicemail configuration.
However, when autoloading modules, it was possible that app_voicemail was
loaded before the format modules. Since format modules don't depend on
anything, set a module load priority on them to ensure that they get loaded
first when autoloading.
This fix applies to trunk, 1.6.1, and 1.6.2. The fix for 1.4 and 1.6.0 will
require a different approach since the module load priority functionality is
not present in the module API.
(issue #16412)
Reported by: jiddings
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@233692 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- make data member of the ast_frame struct a named union instead of a void
Recently the ast_queue_hangup function got a new parameter, the hangupcause
Feedback came in that this is no good and that instead a new function should be created.
This I did.
The hangupcause was stored in the seqno member of the ast_frame struct. This is not very
elegant, and since there's already a data member that one should be used.
Problem is, this member was a void *.
Now it's a named union so it can hold a pointer, an uint32 and there's a padding in case someone
wants to store another type in there in the future.
This commit is so massive, because all ast_frame.data uses have to be
altered to ast_frame.data.data
Thanks russellb and kpfleming for the feedback.
(closes issue #12674)
Reported by: mvanbaak
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@117802 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fix a number of other places where the number of samples in a G722 frame was
not properly handled because of various reasons.
main/rtp.c:
- When a G722 frame is read from the smoother, the number of samples in the
frame must be divided by 2 before being sent out over the network. Even
though G722 is 16 kHz, an error in some previous spec has made it so that
we have to list the number of samples such as if it was 8 kHz.
main/file.c:
- When scheduling the next time to expect a frame, take into account that the
format of the file we're reading from may not be 8 kHz.
codecs/codec_g722.c:
- When converting from G722 to slinear, g722_decode() expects its samples
parameter to be in the silly (real samples / 2) format. Make it so.
- When converting from slinear to G722, properly set the number of samples in
the frame to be the number of bytes of output * 2.
formats/format_pcm.c:
- This format module handles G722, among a number of other formats. However,
the read() and seek() functions did not account for the fact that G722 has
2 samples per byte.
(closes issue #12130, reported by rickross, patched by me)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@106501 65c4cc65-6c06-0410-ace0-fbb531ad65f3
build times - tested, there is no measureable difference before and
after this commit.
In this change:
use asterisk/compat.h to include a small set of system headers:
inttypes.h, unistd.h, stddef.h, stddint.h, sys/types.h, stdarg.h,
stdlib.h, alloca.h, stdio.h
Where available, the inclusion is conditional on HAVE_FOO_H as determined
by autoconf.
Normally, source files should not include any of the above system headers,
and instead use either "asterisk.h" or "asterisk/compat.h" which does it
better.
For the time being I have left alone second-level directories
(main/db1-ast, etc.).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89333 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- restructured build tree and makefiles to eliminate recursion problems
- support for embedded modules
- support for static builds
- simpler cross-compilation support
- simpler module/loader interface (no exported symbols)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@40722 65c4cc65-6c06-0410-ace0-fbb531ad65f3
As partly documented in loader.c and include/asterisk/module.h,
modules are now expected to return all of their methods and flags
into a structure 'mod_data', and are normally loaded with RTLD_NOW
| RTLD_LOCAL, so symbols are resolved immediately and conflicts
should be less likely. Only in a small number of cases (res_*,
typically) modules are loaded RTLD_GLOBAL, so they can export
symbols.
The core of the change is only the two files loader.c and
include/asterisk/module.h, all the rest is simply adaptation of the
existing modules to the new API, a rather mechanical (but believe
me, time and finger-consuming!) process whose detail you can figure
out by svn diff'ing any single module.
Expect some minor compilation issue after this change, please
report it on mantis http://bugs.digium.com/view.php?id=6968
so we collect all the feedback in one place.
I am just sorry that this change missed SVN version number 20000!
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@20003 65c4cc65-6c06-0410-ace0-fbb531ad65f3
collecting common functions in a single place and removing
them from the individual handlers.
The full description is on mantis,
http://bugs.digium.com/view.php?id=6375
and only the ogg_vorbis handler needs to be converted to
the new structure.
As a result of this change, format_au.c and format_pcm_alaw.c
should go away (in a separate commit) as their functionality
(trivial) has been merged in another file.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@17243 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Kinsey Moore
Matthew Jordan
Leif Madsen
David Vossel
Tilghman Lesher
Russell Bryant
Joshua Colp
Sean Bright
Brett Bryant
Michiel van Baak
Luigi Rizzo
Jason Parker
Kevin P. Fleming
Matthew Fredrickson
Mark Spencer