https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r292309 | twilson | 2010-10-19 12:27:32 -0700 (Tue, 19 Oct 2010) | 10 lines
Add sip show peer info about crypto and remove dated comment
This patch adds information about the encryption setting to 'sip show
peers' and removes an out-of-date comment from res_srtp.c and instead
directs users to the proper documentation.
(closes issue #18140)
Reported by: chodorenko
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@292310 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r292050 | tzafrir | 2010-10-16 12:47:00 +0200 (ש', 16 אוק 2010) | 22 lines
Merged revisions 292049 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r292049 | tzafrir | 2010-10-16 12:03:04 +0200 (ש', 16 אוק 2010) | 15 lines
Base directory for MOH should be ASTDATADIR
If the directive 'directory' is relative, make it relative to the
datadir, rather than to the varlibdir. In the sample configuration
it is relative ('moh').
This has no effect unless you have actively set the datadir explicitly
(at build time or at run time).
(closes issue #16906)
Patches:
moh_datadir uploaded by tzafrir (license 46)
Review: https://reviewboard.asterisk.org/r/974/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@292052 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r292016 | twilson | 2010-10-15 16:40:56 -0500 (Fri, 15 Oct 2010) | 5 lines
Ref/unref res_srtp when we create/destroy a session
This avoids unhappy crashing when we try to 'core stop gracefully' and res_srtp
tries to unload before chan_sip does. Thanks, Russell!
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@292017 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r291905 | twilson | 2010-10-15 09:39:58 -0700 (Fri, 15 Oct 2010) | 14 lines
Merged revisions 291904 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r291904 | twilson | 2010-10-15 09:16:57 -0700 (Fri, 15 Oct 2010) | 7 lines
Don't crash or deadlock on module unload
We can't hold the lock while pthread_join is called since aji_log_hook will
attempt to lock from the other therad. We reorder the pthread_join and
ast_aji_disconnect so that we don't do an SSL_read() while SSL_shutdown is
running, causing a crash.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@291906 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r291192 | dvossel | 2010-10-11 16:38:39 -0500 (Mon, 11 Oct 2010) | 19 lines
Gtalk enhancements and general code cleanup.
This patch includes several chan_gtalk enhancements.
Two new gtalk.conf options have been added, externip
and stunadd. Setting externip allows us to
manually specify what the external IP address is
outside of a NAT environment. Setting the stunaddr
option to a valid stun server allows for that external
ip to be retrieved via a STUN server automatically. This
external IP is then advertised during call setup as
a possible candidate.
I have also attempted to clean up chan_gtalk's code
so it meets our coding guidelines. During this cleanup
I noticed several things that need to be done in the
code and made a TODO section at the top of the file.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@291193 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r290542 | twilson | 2010-10-05 21:35:51 -0700 (Tue, 05 Oct 2010) | 6 lines
Don't try to send RTP when remote_address is null
It is possible for ast_rtp_stop() to be called which will clear the remote
address and cause the sendto to fail and spam warnings. Don't send in this
case.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@290543 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r290255 | tilghman | 2010-10-04 18:23:11 -0500 (Mon, 04 Oct 2010) | 18 lines
Merged revisions 290254 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r290254 | tilghman | 2010-10-04 18:14:59 -0500 (Mon, 04 Oct 2010) | 11 lines
Change new pattern matcher to regard dashes the same as the old pattern matcher -- as visual candy to be ignored.
Also change the AEL parser to not generate dashes within extensions, as those
dashes would be ignored. Update the AEL tests to match this behavior.
(closes issue #17366)
Reported by: murf
Patches:
20100727__issue17366.diff.txt uploaded by tilghman (license 14)
Tested by: tilghman
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@290256 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r289840 | jpeeler | 2010-10-01 21:43:45 -0500 (Fri, 01 Oct 2010) | 29 lines
Merged revisions 289798 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r289798 | jpeeler | 2010-10-01 18:01:31 -0500 (Fri, 01 Oct 2010) | 22 lines
Merged revisions 289797 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r289797 | jpeeler | 2010-10-01 17:58:38 -0500 (Fri, 01 Oct 2010) | 15 lines
Change RFC2833 DTMF event duration on end to report actual elapsed time.
The scenario here is with a non P2P early media session. The reported time
length of DTMF presses are coming up short when sending to the remote side.
Currently the event duration is a running total that is incremented when sending
continuation packets. These continuation packets are only triggered upon
incoming media from the remote side, which means that the running total probably
is not going to end up matching the actual length of time Asterisk received
DTMF. This patch changes the end event duration to be lengthened if it is
detected that the end event is going to come up short.
Review: https://reviewboard.asterisk.org/r/957/
ABE-2476
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@289841 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r287269 | pitel | 2010-09-17 10:37:49 +0200 (Pá, 17 zář 2010) | 8 lines
Support for HTTP redirects in calendar's URL
libneon does not support HTTP redirects (3xx responses) by default. You must tell it to follow them.
Also, another little unsigned int fix.
(closes issue #17776)
Review: https://reviewboard.asterisk.org/r/921/
........
r287270 | pitel | 2010-09-17 10:42:37 +0200 (Pá, 17 zář 2010) | 6 lines
Asterisk crashing because of double free when EWS request fails
The free is done later in code. I think ast_free() should have built in checks for double free.
(closes issue #17782)
........
r287271 | pitel | 2010-09-17 10:44:28 +0200 (Pá, 17 zář 2010) | 6 lines
Events are visible after they were removed from EWS calendar
Because we must merge calendar even when it's empty.
(closes issue #17786)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@287272 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r287056 | twilson | 2010-09-15 17:17:17 -0500 (Wed, 15 Sep 2010) | 10 lines
Don't hang up a call on an SRTP unprotect failure
Also make it more obvious when there is an issue en/decrypting.
(closes issue #17563)
Reported by: Alexcr
Patches:
res_srtp.c.patch uploaded by sfritsch (license 1089)
Tested by: twilson
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@287057 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r284477 | twilson | 2010-09-01 13:44:36 -0500 (Wed, 01 Sep 2010) | 17 lines
Fix SRTP for changing SSRC and multiple a=crypto SDP lines
Adding code to Asterisk that changed the SSRC during bridges and masquerades
broke SRTP functionality. Also broken was handling the situation where an
incoming INVITE had more than one crypto offer. This patch caches the SRTP
policies the we use so that we can change the ssrc and inform libsrtp of the
new streams. It also uses the first acceptable a=crypto line from the incoming
INVITE.
(closes issue #17563)
Reported by: Alexcr
Patches:
srtp.diff uploaded by twilson (license 396)
Tested by: twilson
Review: https://reviewboard.asterisk.org/r/878/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@284479 65c4cc65-6c06-0410-ace0-fbb531ad65f3
FAX output channel variables will now match the values reported by FAXOPT() and should be set in all failure and success cases.
This commit also contains a few modifications to the way FAXOPT() variables are populated in a few spots and fixes for some reference count leaks of the session details structure in some failure cases.
Also found and fixed more cases where FAXOPT(status) may not have gotten set.
FAX-214
FAX-203
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@278168 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r277568 | tilghman | 2010-07-16 16:54:29 -0500 (Fri, 16 Jul 2010) | 8 lines
Since we split values at the semicolon, we should store values with a semicolon as an encoded value.
(closes issue #17369)
Reported by: gkservice
Patches:
20100625__issue17369.diff.txt uploaded by tilghman (license 14)
Tested by: tilghman
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@277773 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ast_sockaddr_stringiy_fmt (which is call by all ast_sockaddr_stringify* functions)
uses thread-local storage for storing the string that it creates. In cases where
ast_sockaddr_stringify_fmt was being called twice within the same statement, the
result of one call would be overwritten by the result of the other call. This
usually was happening in printf-like statements and was resulting in the same
stringified addressed being printed twice instead of two separate addresses.
I have fixed this by using ast_strdupa on the result of stringify functions if
they are used twice within the same statement. As far as I could tell, there were
no instances where a pointer to the result of such a call were saved anywhere, so
this is the only situation I could see where this error could occur.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@276570 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The purpose of this patch is to eliminate struct ast_callerid since it has
turned into a miscellaneous collection of various party information.
Eliminate struct ast_callerid and replace it with the following struct
organization:
struct ast_party_name {
char *str;
int char_set;
int presentation;
unsigned char valid;
};
struct ast_party_number {
char *str;
int plan;
int presentation;
unsigned char valid;
};
struct ast_party_subaddress {
char *str;
int type;
unsigned char odd_even_indicator;
unsigned char valid;
};
struct ast_party_id {
struct ast_party_name name;
struct ast_party_number number;
struct ast_party_subaddress subaddress;
char *tag;
};
struct ast_party_dialed {
struct {
char *str;
int plan;
} number;
struct ast_party_subaddress subaddress;
int transit_network_select;
};
struct ast_party_caller {
struct ast_party_id id;
char *ani;
int ani2;
};
The new organization adds some new information as well.
* The party name and number now have their own presentation value that can
be manipulated independently. ISDN supplies the presentation value for
the name and number at different times with the possibility that they
could be different.
* The party name and number now have a valid flag. Before this change the
name or number string could be empty if the presentation were restricted.
Most channel drivers assume that the name or number is then simply not
available instead of indicating that the name or number was restricted.
* The party name now has a character set value. SIP and Q.SIG have the
ability to indicate what character set a name string is using so it could
be presented properly.
* The dialed party now has a numbering plan value that could be useful to
have available.
The various channel drivers will need to be updated to support the new
core features as needed. They have simply been converted to supply
current functionality at this time.
The following items of note were either corrected or enhanced:
* The CONNECTEDLINE() and REDIRECTING() dialplan functions were
consolidated into func_callerid.c to share party id handling code.
* CALLERPRES() is now deprecated because the name and number have their
own presentation values.
* Fixed app_alarmreceiver.c write_metadata(). The workstring[] could
contain garbage. It also can only contain the caller id number so using
ast_callerid_parse() on it is silly. There was also a typo in the
CALLERNAME if test.
* Fixed app_rpt.c using ast_callerid_parse() on the channel's caller id
number string. ast_callerid_parse() alters the given buffer which in this
case is the channel's caller id number string. Then using
ast_shrink_phone_number() could alter it even more.
* Fixed caller ID name and number memory leak in chan_usbradio.c.
* Fixed uninitialized char arrays cid_num[] and cid_name[] in
sig_analog.c.
* Protected access to a caller channel with lock in chan_sip.c.
* Clarified intent of code in app_meetme.c sla_ring_station() and
dial_trunk(). Also made save all caller ID data instead of just the name
and number strings.
* Simplified cdr.c set_one_cid(). It hand coded the ast_callerid_merge()
function.
* Corrected some weirdness with app_privacy.c's use of caller
presentation.
Review: https://reviewboard.asterisk.org/r/702/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@276347 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds a generic API for accommodating IPv6 and IPv4 addresses
within Asterisk. While many files have been updated to make use of the
API, chan_sip and the RTP code are the files which actually support
IPv6 addresses at the time of this commit. The way has been paved for
easier upgrading for other files in the near future, though.
Big thanks go to Simon Perrault, Marc Blanchet, and Jean-Philippe Dionne
for their hard work on this.
(closes issue #17565)
Reported by: russell
Patches:
asteriskv6-test-report.pdf uploaded by russell (license 2)
Review: https://reviewboard.asterisk.org/r/743
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@274783 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r274157 | mmichelson | 2010-07-06 09:29:23 -0500 (Tue, 06 Jul 2010) | 16 lines
Fix problem with RFC 2833 DTMF not being accepted.
A recent check was added to ensure that we did not erroneously
detect duplicate DTMF when we received packets out of order.
The problem was that the check did not account for the fact that
the seqno of an RTP stream will roll over back to 0 after hitting
65535. Now, we have a secondary check that will ensure that the
seqno rolling over will not cause us to stop accepting DTMF.
(closes issue #17571)
Reported by: mdeneen
Patches:
rtp_seqno_rollover.patch uploaded by mmichelson (license 60)
Tested by: richardf, maxochoa, JJCinAZ
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@274164 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Don't Finalize() if Initialize() did not succeed. This resulted in an error
about trying to Finalize() an invalid handle.
Also trim some trailing whitespace while in the area.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@271867 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r271399 | jpeeler | 2010-06-18 14:28:24 -0500 (Fri, 18 Jun 2010) | 11 lines
Fix crash when parsing some heavily nested statements in AEL on reload.
Due to the recursion used when compiling AEL in gen_prios, all the stack space
was being consumed when parsing some AEL that contained nesting 13 levels deep.
Changing a few large buffers to be heap allocated fixed the crash, although I
did not test how many more levels can now be safely used.
(closes issue #16053)
Reported by: diLLec
Tested by: jpeeler
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@271483 65c4cc65-6c06-0410-ace0-fbb531ad65f3
After the manager http auth changes, we forgot to remove the manual
sending of the file. Also, ast_http_send adds two \r\n to the header that
is passed to it, so a trailing \r\n is removed from the Content-type
header. It might be better to change ast_http_send, but I don't like changing
the behavior of an API function.
(closes issue #17239)
Reported by: cjacobsen
Patches:
patch2.diff uploaded by cjacobsen (license 1029)
Tested by: lathama, cjacobsen
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@270660 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The result for moh_register was not verified to guarantee
the mohclass as added to the container.
(closes issue #16993)
Reported by: dmitri
Patches:
res_musiconhold_rtclass2.patch uploaded by dmitri (license 1001)
moh_crash2.diff uploaded by dvossel (license 671)
Tested by: dmitri
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@269271 65c4cc65-6c06-0410-ace0-fbb531ad65f3
After 5 years in mantis and over a year on reviewboard, SRTP support is finally
being comitted. This includes generic CHANNEL dialplan functions that work for
getting the status of whether a call has secure media or signaling as defined
by the underlying channel technology and for setting whether or not a new
channel being bridged to a calling channel should have secure signaling or
media. See doc/tex/secure-calls.tex for examples.
Original patch by mikma, updated for trunk and revised by me.
(closes issue #5413)
Reported by: mikma
Tested by: twilson, notthematrix, hemanshurpatel
Review: https://reviewboard.asterisk.org/r/191/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@268894 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Newer versions of libical (which we require) store the header file in a
libical/ subfolder and include an ical.h file that does a #warning for
deprecation and then #includes <libical/ical.h>. Since we now test for
libical/ical.h, we can change the #includes back to <libical/ical.h> and
remove the test which specifically adds /usr/include/libical as an include
directory.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@266386 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This uses a modified version of pabelanger's patch that checks for NTLM support
instead, which was added in 0.29.0 which is what is required for
res_calendar_ews.
(closes issue #17391)
Reported by: loloski
Patches:
issue17391.patch.v2 uploaded by pabelanger (license 224)
Tested by: twilson
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@265793 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This ensures cross-platform compatibility, even among Linux distributions,
which don't always put headers in the same place.
(closes issue #17391)
Reported by: loloski
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@265747 65c4cc65-6c06-0410-ace0-fbb531ad65f3
During the processing of Cisco dtmf the dtmf samples were
not being calculated correctly. In an attempt to determine
what sample rate was being used, a NULL frame was processed
which caused a crash. This patch resolves this.
(closes issue #17248)
Reported by: falves11
Patches:
issue_17248.diff uploaded by dvossel (license 671)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@264114 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This will save a considerable amount of CPU on the BSDs, including Mac OS X,
as it eliminates several places in the code that we previously used a busy
loop. Additionally, this adds a res_timing interface, using kqueue timers.
Review: https://reviewboard.asterisk.org/r/543/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@262852 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Marquis42 suggested a better method of doing what I wanted because I ended up
removing the WARNING message for all instances when really I just wanted to
remove it for the 'return' keyword, not everything.
(issue #17145)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@262798 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r262421 | qwell | 2010-05-11 14:55:42 -0500 (Tue, 11 May 2010) | 11 lines
Use a less silly method for modifying a flex-generated file.
The sed syntax that was used wasn't actually valid, causing some versions to
choke. This is the method that is used in 1.6.x+ for similar changes.
(closes issue #16696)
Reported by: bklang
Patches:
16696-sedfix.diff uploaded by qwell (license 4)
Tested by: qwell
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@262422 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r260345 | mmichelson | 2010-04-30 15:08:15 -0500 (Fri, 30 Apr 2010) | 18 lines
Fix potential crash from race condition due to accessing channel data without the channel locked.
In res_musiconhold.c, there are several places where a channel's
stream's existence is checked prior to calling ast_closestream on it. The issue
here is that in several cases, the channel was not locked while checking the
stream. The result was that if two threads checked the state of the channel's
stream at approximately the same time, then there could be a situation where
both threads attempt to call ast_closestream on the channel's stream. The result
here is that the refcount for the stream would go below 0, resulting in a crash.
I have added proper channel locking to res_musiconhold.c to ensure that
we do not try to check chan->stream without the channel locked. A Digium customer
has been using this patch for several weeks and has not had any crashes since
applying the patch.
ABE-2147
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@260346 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The fax session initilization code for T.38 faxes has been rewritten. T.38 session initialization was removed from generic_fax_exec, and split into two different code paths for receive and send. Also the 'z' option (to send a T.38 reinvite if we do not receive one) was added to sendfax.
In the output of 'fax show sessions', the 'Type' column has been renamed to 'Tech' and replaced with a new 'Tech' column that will report 'G.711' or 'T.38'.
Control of ECM defaults has been added to res_fax
A 'fax show settings' CLI command has been added.
Support of the new AST_T38_REQUEST_PARMS control method request to handle channels that have already received a T.38 reinvite before the FAX application is start has been added.
Support for the 'fax show settings' command has been added to res_fax_spandsp and handling of the ECM flag has been slightly altered.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@258896 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r258775 | tilghman | 2010-04-25 13:09:05 -0500 (Sun, 25 Apr 2010) | 6 lines
When StopMonitor is called, ensure that it will not be restarted by a channel event.
(closes issue #16590)
Reported by: kkm
Patches:
resmonitor-16590-trunk.239289.diff uploaded by kkm (license 888)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@258776 65c4cc65-6c06-0410-ace0-fbb531ad65f3
"Bad Things" would happen if Asterisk was compiled with DEBUG_THREADS, but a
loaded module was not (or vice versa). This also immensely simplifies the
lock code, since there are no longer 2 separate versions of them.
Review: https://reviewboard.asterisk.org/r/508/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@258557 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added a new manager command to mute/unmute MixMonitor audio on a channel.
Added a new feature to audiohooks so that you can mute either read / write
(or both) types of frames - this allows for MixMonitor to mute either side
of the conversation without affecting the conversation itself.
(closes issue #16740)
Reported by: jmls
Review: https://reviewboard.asterisk.org/r/487/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@258190 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Some platforms prefix externally-visible symbols in object files generated
from C sources (most commonly, '_' is the prefix). On these platforms,
the existing symbol export filtering process ends up suppressing all the symbols
that are supposed to be left visible. This patch allows the prefix string
to be supplied to the top-level Makefile in the LINKER_SYMBOL_PREFIX variable,
and then generates the linker scripts as required to include the prefix
supplied.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@255906 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r254452 | mmichelson | 2010-03-25 10:59:56 -0500 (Thu, 25 Mar 2010) | 44 lines
Several fixes regarding RFC2833 DTMF detection.
Here is a copy and paste of the details from my request on
reviewboard that dealt with these changes:
Fix 1. The first change in place is to fix Mantis issue 15811, which deals with a situation where Asterisk will incorrectly interpret out of order RFC2833 frames as duplicate DTMF digits. For instance, we would receive a sequence like:
seqno 1: DTMF 1
seqno 2: DTMF 1
seqno 3: DTMF 1
seqno 4: DTMF 1
seqno 6: DTMF 1 (end)
seqno 5: DTMF 1
seqno 7: DTMF 1 (end)
seqno 8: DTMF 1 (end)
Prior to this patch when we received the frame with seqno 5, we would interpret this as a new DTMF 1. With this patch, we will check the seqno of the incoming digit and not process the frame if the seqno is lower than the last recorded seqno. Note that we do not record the seqno of the dropped DTMF frame for future processing. While the above situation is what was designed to be fixed, the patch is written in such a way that the following would also be fixed too:
seqno 9: DTMF 1
seqno 10: DTMF 1 (end)
seqno 11: DTMF 1 (end)
seqno 13: DTMF 2
seqno 12: DTMF 1 (end)
seqno 14: DTMF 2
seqno 15: DTMF 2 (end)
seqno 16: DTMF 2 (end)
seqno 17: DTMF 2 (end)
In this second situation, the beginning of the DTMF 2 arrives before the final end frame of the DTMF 1. With the patch, seqno 12 is no processed and thus we properly interpret the DTMF.
Fix 2. The second change in place is to fix an issue like the following:
seqno 1: DTMF 1
seqno 2: DTMF 1
seqno 3: DTMF 1 (end) *packet lost*
seqno 4: DTMF 1 (end) *packet lost*
seqno 5: DTMF 1 (end) *packet lost*
seqno 6: DTMF 2
When we receive seqno 6, we had code in place that was supposed to properly end the previously unended DTMF 1. The problem was that the code was essentially a no-op. The code would set up an end frame for the DTMF 1 but would immediately overwrite the frame with the begin for DTMF 2. I changed process_dtmf_rfc2833() so that instead of returning a single frame, it is given as an output parameter a list of frames. Each frame that needs to be returned is appended to this list.
Fix 3. The final change is a minor one where an AST_CONTROL_SRCCHANGE frame could get lost. If we process a cisco DTMF or an RFC 3389 frame and no frame was returned, then we would return &ast_null_frame. The problem is that earlier in the function, we may have generated an AST_CONTROL_SRCCHANGE frame and put it in the list of frames we wish to return. This frame would be lost in such a case. The patch fixes this problem
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@254454 65c4cc65-6c06-0410-ace0-fbb531ad65f3
application is executing on a channel.
This patch addresses an issue found during working with end-users
using res_fax. If an incoming call is answered in the dialplan, or
jumps to the 'fax' extension due to reception of a CNG tone (with
faxdetect enabled), and then the remote endpoint sends a T.38
re-INVITE, it is possible for the channel's T.38 state to be
'T38_STATE_NEGOTIATING' when the application starts up. Unfortunately,
even if the application wants to use T.38, it can't respond to the
peer's negotiation request, because the AST_CONTROL_T38_PARAMETERS
control frame that chan_sip sent originally has been lost, and the
application needs the content of that frame to be able to formulate a
reply.
This patch adds a new 'request' type to AST_CONTROL_T38_PARAMETERS,
AST_T38_REQUEST_PARMS. If the application sends this request, chan_sip
will re-send the original control frame (with
AST_T38_REQUEST_NEGOTIATE as the request type), and the application
can respond as normal. If this occurs within the five second timeout
in chan_sip, the automatic cancellation of the peer reinvite will be
stopped, and the application will 'own' the negotiation process from
that point onwards.
This also improves the code path in chan_sip to allow sip_indicate(),
when called for AST_CONTROL_T38_PARAMETERS, to be able to return a
non-zero response, which should have been in place before since the
control frame *can* fail to be processed properly. It also modifies
ast_indicate() to return whatever result the channel driver returned
for this control frame, rather than converting all non-zero results
into '-1'. Finally, the new request type intentionally returns a
positive value, so that an application that sends
AST_T38_REQUEST_PARMS can know for certain whether the channel driver
accepted it and will be replying with a control frame of its own, or
whether it was ignored (if the sip_indicate()/ast_indicate() path had
properly supported failure responses before, this would not be
necessary).
This patch also modifies res_fax to take advantage of the new request.
In addition, this patch makes sip_t38_abort() actually lock the
private structure before doing its work... bad programmer, no donut.
This patch also enhances chan_sip's 'faxdetect' support to allow
triggering on T.38 re-INVITEs received as well as CNG tone detection.
Review: https://reviewboard.asterisk.org/r/556/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@254450 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r254235 | jpeeler | 2010-03-23 19:37:23 -0500 (Tue, 23 Mar 2010) | 72 lines
Ensure that monitor recordings are written to the correct location (again)
This is an extension to 248860. As such the dialplan test has been extended:
; non absolute path, not combined
exten => 5040, 1, monitor(wav,tmp/jeff/monitor_test)
exten => 5040, n, dial(sip/5001)
; absolute path, not combined
exten => 5041, 1, monitor(wav,/tmp/jeff/monitor_test2)
exten => 5041, n, dial(sip/5001)
; no path, not combined
exten => 5042, 1, monitor(wav,monitor_test3)
exten => 5042, n, dial(sip/5001)
; combined: changemonitor from non absolute to no path (leaves tmp/jeff)
exten => 5043, 1, monitor(wav,tmp/jeff/monitor_test4,m)
exten => 5043, n, changemonitor(monitor_test5)
exten => 5043, n, dial(sip/5001)
; combined: changemonitor from no path to non absolute path
exten => 5044, 1, monitor(wav,monitor_test6,m)
exten => 5044, n, changemonitor(tmp/jeff/monitor_test7) ; this wasn't possible before
exten => 5044, n, dial(sip/5001)
; non absolute path, combined
exten => 5045, 1, monitor(wav,tmp/jeff/monitor_test8,m)
exten => 5045, n, dial(sip/5001)
; absolute path, combined
exten => 5046, 1, monitor(wav,/tmp/jeff/monitor_test9,m)
exten => 5046, n, dial(sip/5001)
; no path, combined
exten => 5047, 1, monitor(wav,monitor_test10,m)
exten => 5047, n, dial(sip/5001)
; combined: changemonitor from non absolute to absolute (leaves tmp/jeff)
exten => 5048, 1, monitor(wav,tmp/jeff/monitor_test11,m)
exten => 5048, n, changemonitor(/tmp/jeff/monitor_test12)
exten => 5048, n, dial(sip/5001)
; combined: changemonitor from absolute to non absolute (leaves /tmp/jeff)
exten => 5049, 1, monitor(wav,/tmp/jeff/monitor_test13,m)
exten => 5049, n, changemonitor(tmp/jeff/monitor_test14)
exten => 5049, n, dial(sip/5001)
; combined: changemonitor from no path to absolute
exten => 5050, 1, monitor(wav,monitor_test15,m)
exten => 5050, n, changemonitor(/tmp/jeff/monitor_test16)
exten => 5050, n, dial(sip/5001)
; combined: changemonitor from absolute to no path (leaves /tmp/jeff)
exten => 5051, 1, monitor(wav,/tmp/jeff/monitor_test17,m)
exten => 5051, n, changemonitor(monitor_test18)
exten => 5051, n, dial(sip/5001)
; not combined: changemonitor from non absolute to no path (leaves tmp/jeff)
exten => 5052, 1, monitor(wav,tmp/jeff/monitor_test19)
exten => 5052, n, changemonitor(monitor_test20)
exten => 5052, n, dial(sip/5001)
; not combined: changemonitor from no path to non absolute
exten => 5053, 1, monitor(wav,monitor_test21)
exten => 5053, n, changemonitor(tmp/jeff/monitor_test22)
exten => 5053, n, dial(sip/5001)
; not combined: changemonitor from non absolute to absolute (leaves tmp/jeff)
exten => 5054, 1, monitor(wav,tmp/jeff/monitor_test23)
exten => 5054, n, changemonitor(/tmp/jeff/monitor_test24)
exten => 5054, n, dial(sip/5001)
; not combined: changemonitor from absolute to non absolute (leaves /tmp/jeff)
exten => 5055, 1, monitor(wav,/tmp/jeff/monitor_test24)
exten => 5055, n, changemonitor(tmp/jeff/monitor_test25)
exten => 5055, n, dial(sip/5001)
; not combined: changemonitor from no path to absolute
exten => 5056, 1, monitor(wav,monitor_test26)
exten => 5056, n, changemonitor(/tmp/jeff/monitor_test27)
exten => 5056, n, dial(sip/5001)
; not combined: changemonitor from absolute to no path (leaves /tmp/jeff)
exten => 5057, 1, monitor(wav,/tmp/jeff/monitor_test28)
exten => 5057, n, changemonitor(monitor_test29)
exten => 5057, n, dial(sip/5001)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@254277 65c4cc65-6c06-0410-ace0-fbb531ad65f3
users expect them to work.
'core set debug' and 'core set verbose' can optionally change the
level for a specific filename; however, this is actually for a
specific source file name, not the module that source file is included
in. With examples like chan_sip, chan_iax2, chan_misdn and others
consisting of multiple source files, this will not lead to the
behavior that users expect. If they want to set the debug level for
chan_sip, they want it set for all of chan_sip, and not to have to
also set it for reqresp_parser and other files that comprise the
chan_sip module.
This patch changes this functionality to be module-name based instead
of file-name based.
To make this work, some Makefile modifications were required to ensure
that the AST_MODULE definition is present in each object file produced
for each module as well.
Review: https://reviewboard.asterisk.org/r/574/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@253917 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The other issue mentioned in this bug will be more difficult to resolve since we
have no idea (right now) of knowing if the command that is aliased has been
installed yet.
(issue #16978)
Reported by: jw-asterisk
Tested by: seanbright
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@252848 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Previously, values that began with whitespace were silently treated as 'no',
and all non-'yes' values were also treated as 'no'. Now the supplied value
is specifically checked for a 'yes' or 'no' (or equivalent) value, after skipping
leading whitespace. If the value is not valid, then a warning message is generated.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@252709 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change basically reverts the change reviewed in
https://reviewboard.asterisk.org/r/374/ and instead limits the
updating of the RTP synchronization source to only those times when we
detect that the other side of the conversation has changed the ssrc.
The problem is that SRCUPDATE control frames are sent many times where
we don't want a new ssrc, including whenever Asterisk has to send DTMF
in a normal bridge. This is also not the first time that this mistake
has been made. The initial implementation of the ast_rtp_new_source
function also changed the ssrc--and then it was removed because of
this same issue. Then, we put it back in again to fix a different
issue. This patch attempts to only change the ssrc when we see that
the other side of the conversation has changed the ssrc.
It also renames some functions to make their purpose more clear.
Review: https://reviewboard.asterisk.org/r/540/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@252089 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r248860 | jpeeler | 2010-02-25 15:22:06 -0600 (Thu, 25 Feb 2010) | 18 lines
Ensure that monitor recordings are written to the correct location (again)
This is an extension to 248757. As such the dialplan test has been extended:
exten => 5040, 1, monitor(wav,tmp/jeff/monitor_test,b)
exten => 5040, n, dial(sip/5001)
exten => 5041, 1, monitor(wav,/tmp/jeff/monitor_test2,b)
exten => 5041, n, dial(sip/5001)
exten => 5042, 1, monitor(wav,monitor_test3,b)
exten => 5042, n, dial(sip/5001)
exten => 5043, 1, monitor(wav,tmp/jeff/monitor_test3,m)
exten => 5043, n, changemonitor(monitor_test4)
exten => 5043, n, dial(sip/5001)
exten => 5044, 1, monitor(wav,monitor_test4,m)
exten => 5044, n, changemonitor(tmp/jeff/monitor_test5) ; this looks to fail by design and emits a warning
exten => 5044, n, dial(sip/5001)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@248952 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r248757 | jpeeler | 2010-02-25 12:06:54 -0600 (Thu, 25 Feb 2010) | 15 lines
Ensure that monitor recordings are written to the correct location.
Recordings should be placed in the monitor directory when a non-absolute path
is used.
Exact dialplan used for testing:
exten => 5040, 1, monitor(wav,tmp/jeff/monitor_test,b)
exten => 5040, n, dial(sip/5001)
exten => 5041, 1, monitor(wav,/tmp/jeff/monitor_test2,b)
exten => 5041, n, dial(sip/5001)
exten => 5042, 1, monitor(wav,monitor_test3,b)
exten => 5042, n, dial(sip/5001)
ABE-2101
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@248793 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The new JabberStatus event gives a concise view of the status change to the AMI
clients. Thanks fiddur!
(closes issue #16760)
Reported by: fiddur
Patches:
244498.2.diff uploaded by fiddur (license 678)
Tested by: fiddur, phsultan
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@247500 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Detect all platforms that don't like that, either, and ensure that when documentation is
missing, we pass a non-NULL pointer when outputting the corresponding documentation.
(closes issue #16689)
Reported by: bklang
Patches:
20100209__issue16689__with_tests.diff.txt uploaded by tilghman (license 14)
Review: https://reviewboard.asterisk.org/r/497/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@246030 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Initialize the calendars container before calling load_config and return FAILURE
on allocation failure. Also, use the AST_MODULE_LOAD_* values for return values.
Thanks to rmudgett for pointing out the error and the need to use the defined
values for return
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@242812 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r242520 | tilghman | 2010-01-24 00:33:01 -0600 (Sun, 24 Jan 2010) | 8 lines
Only rebuild bison and flex source files on demand, if bison and flex are detected by the configure script.
Changed after discussion on the -dev list about possible unnecessary build
failures, due to checkouts/untars causing these special source files to
possibly be newer than their resulting C files. This should additionally
ensure that nobody need learn about extra Makefile arguments to ensure the
proper files get rebuilt when changes are made to these special source files.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@242521 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r237405 | tilghman | 2010-01-04 12:19:00 -0600 (Mon, 04 Jan 2010) | 16 lines
Add a flag to disable the Background behavior, for AGI users.
This is in a section of code that relates to two other issues, namely
issue #14011 and issue #14940), one of which was the behavior of
Background when called with a context argument that matched the current
context. This fix broke FreePBX, however, in a post-Dial situation.
Needless to say, this is an extremely difficult collision of several
different issues. While the use of an exception flag is ugly, fixing all
of the issues linked is rather difficult (although if someone would like
to propose a better solution, we're happy to entertain that suggestion).
(closes issue #16434)
Reported by: rickead2000
Patches:
20091217__issue16434.diff.txt uploaded by tilghman (license 14)
20091222__issue16434__1.6.1.diff.txt uploaded by tilghman (license 14)
Tested by: rickead2000
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@237406 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r235940 | jpeeler | 2009-12-21 13:43:41 -0600 (Mon, 21 Dec 2009) | 13 lines
Change Monitor to not assume file to write to does not contain pathing.
227944 changed the fname_base argument to always append the configured monitor
path. This change was necessary to properly compare files for uniqueness.
If a full path is given though, nothing needs to be appended and that is
handled correctly now.
(closes issue #16377)
(closes issue #16376)
Reported by: bcnit
Patches:
res_monitor.c-issue16376-1.patch uploaded by dant (license 670)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@235941 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The option is global and currently the acceptable values as noted in the sample
config are accept or deny.
(closes issue #15228)
Reported by: lp0
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@235342 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Classes are now tracked past removal from the core container, and module
removal is actively prevented until all references are freed.
* A hanging reference stored in the channel has been removed. This could have
caused a mismatch and the music state not properly cleared, if two or more
reloads occurred between MOH being stopped and MOH being restarted.
* In certain circumstances, duplicate classes were possible.
* A race existed at reload time between a process being killed and the thread
responsible for reading from the related pipe respawning that process.
* Several reference counts have also been corrected. At least one could have
caused deleted classes to stick around forever, consuming resources. This
originally manifested as MOH external processes that were not killed at
reload time.
(closes issue #16279, closes issue #16207)
Reported by: parisioa, dcabot
Patches:
20091202__issue16279__2.diff.txt uploaded by tilghman (license 14)
Tested by: parisioa, tilghman
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@232660 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In the process of swapping ULAW to a place in the extended codec space, we
found several unhandled cases, where a 32-bit integer was still being used to
handle a codec field. Most of these have been fixed with this commit, although
there is at least one case (codec_dahdi) which depends upon outside headers to
be altered before a conversion can be made.
(Fixes AST-278, SWP-459)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@231850 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A thread storage variable was being freed incorrectly, which
resulted in a double free if two queries were made in the same thread.
(closes issue #16011)
Reported by: cristiandimache
Patches:
issue16011.diff uploaded by dvossel (license 671)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@229093 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* chan_console accessed pvts after deallocation.
* cdr_mysql stored a pointer that was freed by realloc()
* The module loader did not check usecount on shutdown, which led to chan_iax2
reading a timer that was already unloaded.
* The event subsystem sometimes creates an event with no IEs. Due to a corner
condition, the code would read beyond the memory boundary.
* res_pktccops did not correctly check whether its monitor thread was started.
(closes issue #16062)
Reported by: alexanderheinz
Patches:
20091109__issue16062.diff.txt uploaded by tilghman (license 14)
Tested by: tilghman
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@228798 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r227944 | jpeeler | 2009-11-04 17:47:08 -0600 (Wed, 04 Nov 2009) | 14 lines
Fix incorrect filename comparsion after monitor file change
The logic to detect if a requested file is indeed a different file from the
current file was incorrect. The main issue being confusion of the use of
filename_base which was previously set without pathing information and then
compared to another full path. Robust file comparison logic has been added
to properly check if two files are the same even if symlinks are used.
(closes issue #15313)
Reported by: caspy
Patches:
20091103__issue15313__1.4.diff.txt uploaded by jpeeler (license 325)
but mostly tilghman's work
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@227945 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is a side project I've been poking at this week. The intent is to discuss
Asterisk architecture in a top down fashion to help new developers understand how
Asterisk is put together. There is a ton of stuff to write about, so this will
just continue to evolve over time.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@226606 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch finishes the implementation of OBJ_MULTIPLE in astobj2 (the
case where multiple results need to be returned; OBJ_NODATA mode
already was supported). In addition, it converts ast_channel_iterators
(only the targeted versions, not the ones that iterate over all
channels) to use this method.
During this work, I removed the 'ao2_flags' arguments to the
ast_channel_iterator constructor functions; there were no uses of that
argument yet, there is only one possible flag to pass, and it made the
iterators less 'opaque'. If at some point in the future someone really
needs an ast_channel_iterator that does not lock the container, we can
provide constructor(s) for that purpose.
Review: https://reviewboard.asterisk.org/r/379/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@225244 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r224670 | kpfleming | 2009-10-19 18:44:07 -0500 (Mon, 19 Oct 2009) | 7 lines
Correct timestamp calculations when RTP sample rates over 8kHz are used.
While testing some endpoints that support 16kHz and 32kHz sample rates, some
log messages were generated due to calc_rxstamp() computing timestamps in a way
that produced odd results, so this patch sanitizes the result of the
computations.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@224671 65c4cc65-6c06-0410-ace0-fbb531ad65f3
CONFIRMED status doesn't imply busy or free, that is handled with the TRANSP
field. Luckily, libical already sets the is_busy status on the span for us.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@223370 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This isn't the best way to do this, but it is the easiest. There are some
limitations that are going to need to be addressed at some point with reloads
and when I (or someone else) work on that, then the API can be updated to
handle passing the private config data that the calendar tech modules need in
a better way as well.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@223016 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change is done in such a way as to allow the driver to continue to
function with older databases which don't have these features.
(closes issue #16000)
Reported by: jamicque
Patches:
20091002__issue16000.diff.txt uploaded by tilghman (license 14)
20091002__issue16000__1.6.1.diff.txt uploaded by tilghman (license 14)
Tested by: jamicque
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@222309 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This affected the ~~EXTEN~~ hack, where a subroutine might have changed the
value before it was used in the caller.
Patch by myself, tested by ebroad on #asterisk
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@222273 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r222152 | kpfleming | 2009-10-05 20:16:36 -0500 (Mon, 05 Oct 2009) | 20 lines
Fix ao2_iterator API to hold references to containers being iterated.
See Mantis issue for details of what prompted this change.
Additional notes:
This patch changes the ao2_iterator API in two ways: F_AO2I_DONTLOCK
has become an enum instead of a macro, with a name that fits our
naming policy; also, it is now necessary to call
ao2_iterator_destroy() on any iterator that has been
created. Currently this only releases the reference to the container
being iterated, but in the future this could also release other
resources used by the iterator, if the iterator implementation changes
to use additional resources.
(closes issue #15987)
Reported by: kpfleming
Review: https://reviewboard.asterisk.org/r/383/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@222176 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r221086 | twilson | 2009-09-30 09:49:11 -0500 (Wed, 30 Sep 2009) | 25 lines
Change the SSRC by default when our media stream changes
Be default, change SSRC when doing an audio stream changes Asterisk doesn't
honor marker bit when reinvited to already-bridged RTP streams,resulting in
far-end stack discarding packets with "old" timestamps that areactually part of
a new stream. This patch sends AST_CONTROL_SRCUPDATE whenever there is a
reinvite, unless the 'constantssrc' is set to true in sip.conf.
The original issue reported to Digium support detailed the following situation:
ITSP <-> Asterisk 1.4.26.2 <-> SIP-based Application Server Call comes in
fromITSP, Asterisk dials the app server which sends a re-invite back
toAsterisk--not to negotiate to send media directly to the ITSP, but to
indicatethat it's changing the stream it's sending to Asterisk. The app
servergenerates a new SSRC, sequence numbers, timestamps, and sets the marker
bit on the new stream. Asterisk passes through the teimstamp of the new stream,
butdoes not reset the SSRC, sequence numbers, or set the marker bit.
When the timestamp on the new stream is older than the timestamp on the
originalstream, the ITSP (which doesn't know there has been any change) discards
the newframes because it thinks they are too old. This patch addresses this by
changing the SSRC on a stream update unless constantssrc=true is set in
sip.conf.
Review: https://reviewboard.asterisk.org/r/374/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@221266 65c4cc65-6c06-0410-ace0-fbb531ad65f3
JABBER_RECEIVE (along with JabberSend) makes Asterisk interact with users over
XMPP to process calls.
SendText can be used instead of JabberSend in the context of XMPP based voice
channels (chan_gtalk and chan_jingle).
(closes issue #12569)
Reported by: eech55
Tested by: phsultan, asannucci, lmadsen, jtodd, maxgo
Review: https://reviewboard.asterisk.org/r/88/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@220457 65c4cc65-6c06-0410-ace0-fbb531ad65f3
gcc 4.4 has more strict rules for aliasing. It doesn't like a
struct sockaddr_in pointer pointing to a struct sockaddr. So we make it
a union.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@217445 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This makes res_calendar.c compile on OpenBSD and the same
cast is used in a lot of other places where time_t type vars are used.
(closes issue #15656)
Reported by: mvanbaak
Patches:
2009081100-rescalendarcompilefix.diff.txt uploaded by mvanbaak (license 7)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@212343 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r207647 | kpfleming | 2009-07-21 08:04:44 -0500 (Tue, 21 Jul 2009) | 12 lines
Ensure that user-provided CFLAGS and LDFLAGS are honored.
This commit changes the build system so that user-provided flags (in ASTCFLAGS
and ASTLDFLAGS) are supplied to the compiler/linker *after* all flags provided
by the build system itself, so that the user can effectively override the
build system's flags if desired. In addition, ASTCFLAGS and ASTLDFLAGS can now
be provided *either* in the environment before running 'make', or as variable
assignments on the 'make' command line. As a result, the use of COPTS and LDOPTS
is no longer necessary, so they are no longer documented, but are still supported
so as not to break existing build systems that supply them when building Asterisk.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@207680 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit introduces the security events API. This API is to be used by
Asterisk components to report events that have security implications.
A simple example is when a connection is made but fails authentication. These
events can be used by external tools manipulate firewall rules or something
similar after detecting unusual activity based on security events.
Inside of Asterisk, the events go through the ast_event API. This means that
they have a binary encoding, and it is easy to write code to subscribe to these
events and do something with them.
One module is provided that is a subscriber to these events - res_security_log.
This module turns security events into a parseable text format and sends them
to the "security" logger level. Using logger.conf, these log entries may be
sent to a file, or to syslog.
One service, AMI, has been fully updated for reporting security events.
AMI was chosen as it was a fairly straight forward service to convert.
The next target will be chan_sip. That will be more complicated and will
be done as its own project as the next phase of security events work.
For more information on the security events framework, see the documentation
generated from doc/tex/. "make asterisk.pdf"
Review: https://reviewboard.asterisk.org/r/273/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@206021 65c4cc65-6c06-0410-ace0-fbb531ad65f3
While doing some reading about OpenSSL, I noticed a couple of things that
needed to be improved with our usage of OpenSSL.
1) We had initialization of the library done in multiple modules. This has now
been moved to a core function that gets executed during Asterisk startup.
We already link OpenSSL into the core for TCP/TLS functionality, so this
was the most logical place to do it.
2) OpenSSL is not thread-safe by default. However, making it thread safe is
very easy. We just have to provide a couple of callbacks. One callback
returns a thread ID. The other handles locking. For more information,
start with the "Is OpenSSL thread-safe?" question on the FAQ page of
openssl.org.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@205120 65c4cc65-6c06-0410-ace0-fbb531ad65f3
CEL is the new system for logging channel events. This was inspired after
facing many problems trying to represent what is possible to happen to a call
in Asterisk using CDR records. For more information on CEL, see the built in
HTML or PDF documentation generated from the files in doc/tex/.
Many thanks to Steve Murphy (murf) and Brian Degenhardt (bmd) for their hard
work developing this code. Also, thanks to Matt Nicholson (mnicholson) and
Sean Bright (seanbright) for their assistance in the final push to get this
code ready for Asterisk trunk.
Review: https://reviewboard.asterisk.org/r/239/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@203638 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r201600 | russell | 2009-06-18 10:24:31 -0500 (Thu, 18 Jun 2009) | 29 lines
Fix memory corruption and leakage related reloads of non files mode MoH classes.
For Music on Hold classes that are not files mode, meaning that we are executing
an application that will feed us audio data, we use a thread to monitor the
external application and read audio from it. This thread also makes use of the
MoH class object. In the MoH class destructor, we used pthread_cancel() to ask
the thread to exit. Unfortunately, the code did not wait to ensure that the
thread actually went away. What needed to be done is a pthread_join() to ensure
that the thread fully cleans up before we proceed. By adding this one line, we
resolve two significant problems:
1) Since the thread was never joined, it never fully goes away. So, on every
reload of non-files mode MoH, an unused thread was sticking around.
2) There was a race condition here where the application monitoring thread
could still try to access the MoH class, even though the thread executing
the MoH reload has already destroyed it.
(issue #15109)
Reported by: jvandal
(issue #15123)
Reported by: axisinternet
(issue #15195)
Reported by: amorsen
(issue AST-208)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@201610 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch provides a new implementation of the optional API support defined
in asterisk/optional_api.h; this new version provides solves compatibility
issues with the use of linker version scripts for suppressing global symbols.
In addition, there is now a functional (and tested!) implementation for Mac OS/X,
so module writers no longer need to use special tests before calling optional
API functions. All future implementations must provide these same semantics,
so that module writers can rely on them.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@200519 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds the option to give a module a load priority. The value represents the order in which a module's load() function is initialized. The lower the value, the higher the priority. The value is only checked if the AST_MODFLAG_LOAD_ORDER flag is set. If the AST_MODFLAG_LOAD_ORDER flag is not set, the value will never be read and the module will be given the lowest possible priority
on load. Since some modules are reliant on a timing interface, the timing modules have been given a high load priorty.
(closes issue #15191)
Reported by: alecdavis
Tested by: dvossel
Review: https://reviewboard.asterisk.org/r/262/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@199743 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Move MusicOnHold, SetMusicOnHold, StartMusicOnHold, StopMusicOnHold static
documentation to the new AstXML form.
(issue #15245)
Reported by: eliel
Patches:
res_musiconhold_static_conversion.txt uploaded by lmadsen (license 10)
(with some fixes and formatting by me)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@199413 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Move function PP_EACH_USER and PP_EACH_EXTENSION documentation to the new
AstXML form.
(issue #15245)
Reported by: eliel
Patches:
res_phoneprov_static_conversion.txt uploaded by lmadsen (license 10)
(with PP_EACH_USER add by me)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@199411 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Moved more static docs to XML (pplications and manager actions):
Monitor, StopMonitor, ChangeMonitor, PauseMonitor, UnpauseMonitor.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@198661 65c4cc65-6c06-0410-ace0-fbb531ad65f3
aji_io_recv takes the maximum number of bytes to read (instead of the total
buffer size), so we have to subtract 1 from our buffer size. Without this, when
we receive packets that are larger than our buffer, iksemel will choke and
things get wonky.
(closes issue #15232)
Reported by: lp0
Patches:
05302009_res_jabber.c.patch uploaded by seanbright (license 71)
Tested by: seanbright, lp0
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@198375 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r198370 | seanbright | 2009-05-30 15:36:20 -0400 (Sat, 30 May 2009) | 12 lines
Properly terminate AMI JabberSend response messages.
The response message (either Error or Success) needs an extra trailing \r\n
after the fields to inform the client that the message is complete.
(closes issue #14876)
Reported by: srt
Patches:
05302009_1.4_res_jabber.c.diff uploaded by seanbright (license 71)
asterisk_14876.patch uploaded by srt (license 378)
trunk-14876-2.diff uploaded by phsultan (license 73)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@198371 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The situation that caused this problem was when continuous mode was being
turned on and off while a rate was set for a timing interface. A very easy
way to replicate this bug was to do a Playback() from behind a Local channel.
In this scenario, a rate gets set on the channel for doing file playback.
At the same time, continuous mode gets turned on and off about every 20 ms
as frames get queued on to the PBX side channel from the other side of the
Local channel.
Essentially, this module treated continuous mode and a set rate as mutually
exclusive states for the timer to be in. When I dug deep enough, I observed
the following pattern:
1) Set timer to tick every 20 ms.
2) Wait almost 20 ms ...
3) Continuous mode gets turned on for a queued up frame
4) Continuous mode gets turned off
5) The timer goes back to its tick per 20 ms. state but starts counting
at 0 ms.
6) Goto step 2.
Sometimes, res_timing_pthread would make it 20 ms and produce a timer tick,
but not most of the time. This is what produced the choppy sound (or sometimes
no sound at all).
Now, the module treats continuous mode and a set rate as completely independent
timer modes. They can be enabled and disabled independently of each other and
things work as expected.
(closes issue #14412)
Reported by: dome
Patches:
issue14412.diff.txt uploaded by russell (license 2)
issue14412-1.6.1.0.diff.txt uploaded by russell (license 2)
Tested by: DennisD, russell
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@198146 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit add Calendaring support to Asterisk for iCalendar, CalDAV, and MS
Exchange calendars. Exchange support has only been tested on Exchange Server 2k3
and does not support forms-based authentication at this time (patches *very*
welcome). Exchange support is also currently missing the ability to return a
list of a meting's attendees (again, patches are very, very welcome).
Features include:
Querying a calendar for events over a specific time range
Checking a calendar's busy status via the dialplan
Writing calendar events via the dialplan (CalDAV and Exchange only)
Handling calendar event notifications through the dialplan
(closes issue #14771)
Tested by: lmadsen, twilson, Shivaprakash
Review: https://reviewboard.asterisk.org/r/58
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@197738 65c4cc65-6c06-0410-ace0-fbb531ad65f3
