Commit r62462 added two extra fields for logging "the original position the
caller entered the queue at, and the amount of time the caller was waiting in
the queue." But when r75969 was merged from 1.4 into trunk (r75977), these two
fields disappeared. Those two extra fields were not logged in 1.4 and when the
patch was merged, those fields went away.
Therefore, this is a regression and was caught by the reporter because he was
reading the awesome "Asterisk: The Definitive Guide" book.
(closes issue ASTERISK-22197)
Reported by: Dalius M.
Tested by: Dalius M.
Patches:
asterisk-22197-q-log-exitwithkey.diff
uploaded by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2901/
........
Merged revisions 400622 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 400623 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 400624 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400625 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Channel snapshots have string representations of the channel's native formats.
Prior to this change, the format strings were re-created on ever channel snapshot
creation. Since channel native formats rarely change, this was very wasteful.
Now, string representations of formats may optionally be stored on the ast_format_cap
for cases where string representations may be requested frequently. When formats
are altered, the string cache is marked as invalid. When strings are requested, the
cache validity is checked. If the cache is valid, then the cached strings are copied.
If the cache is invalid, then the string cache is rebuilt and copied, and the cache
is marked as being valid again.
Review: https://reviewboard.asterisk.org/r/2879
........
Merged revisions 400356 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400363 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* There were several places in ARI where an external library was mallocing
memory that must always be released with free(). When MALLOC_DEBUG is
enabled, free() is redirected to the MALLOC_DEBUG version. Since the
external library call still uses the normal malloc(), MALLOC_DEBUG
complains that the freed memory block is not registered and will not free
it. These cases must use ast_std_free().
* Changed calls to asprintf() and vasprintf() to the equivalent
ast_asprintf() and ast_vasprintf() versions respectively.
........
Merged revisions 400270 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400271 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r399887 | dlee | 2013-09-26 10:41:47 -0500 (Thu, 26 Sep 2013) | 1 line
Minor performance bump by not allocate manager variable struct if we don't need it
........
r400138 | dlee | 2013-09-30 10:24:00 -0500 (Mon, 30 Sep 2013) | 23 lines
Stasis performance improvements
This patch addresses several performance problems that were found in
the initial performance testing of Asterisk 12.
The Stasis dispatch object was allocated as an AO2 object, even though
it has a very confined lifecycle. This was replaced with a straight
ast_malloc().
The Stasis message router was spending an inordinate amount of time
searching hash tables. In this case, most of our routers had 6 or
fewer routes in them to begin with. This was replaced with an array
that's searched linearly for the route.
We more heavily rely on AO2 objects in Asterisk 12, and the memset()
in ao2_ref() actually became noticeable on the profile. This was
#ifdef'ed to only run when AO2_DEBUG was enabled.
After being misled by an erroneous comment in taskprocessor.c during
profiling, the wrong comment was removed.
Review: https://reviewboard.asterisk.org/r/2873/
........
r400178 | dlee | 2013-09-30 13:26:27 -0500 (Mon, 30 Sep 2013) | 24 lines
Taskprocessor optimization; switch Stasis to use taskprocessors
This patch optimizes taskprocessor to use a semaphore for signaling,
which the OS can do a better job at managing contention and waiting
that we can with a mutex and condition.
The taskprocessor execution was also slightly optimized to reduce the
number of locks taken.
The only observable difference in the taskprocessor implementation is
that when the final reference to the taskprocessor goes away, it will
execute all tasks to completion instead of discarding the unexecuted
tasks.
For systems where unnamed semaphores are not supported, a really
simple semaphore implementation is provided. (Which gives identical
performance as the original taskprocessor implementation).
The way we ended up implementing Stasis caused the threadpool to be a
burden instead of a boost to performance. This was switched to just
use taskprocessors directly for subscriptions.
Review: https://reviewboard.asterisk.org/r/2881/
........
r400180 | dlee | 2013-09-30 13:39:34 -0500 (Mon, 30 Sep 2013) | 28 lines
Optimize how Stasis forwards are dispatched
This patch optimizes how forwards are dispatched in Stasis.
Originally, forwards were dispatched as subscriptions that are invoked
on the publishing thread. This did not account for the vast number of
forwards we would end up having in the system, and the amount of work it
would take to walk though the forward subscriptions.
This patch modifies Stasis so that rather than walking the tree of
forwards on every dispatch, when forwards and subscriptions are changed,
the subscriber list for every topic in the tree is changed.
This has a couple of benefits. First, this reduces the workload of
dispatching messages. It also reduces contention when dispatching to
different topics that happen to forward to the same aggregation topic
(as happens with all of the channel, bridge and endpoint topics).
Since forwards are no longer subscriptions, the bulk of this patch is
simply changing stasis_subscription objects to stasis_forward objects
(which, admittedly, I should have done in the first place.)
Since this required me to yet again put in a growing array, I finally
abstracted that out into a set of ast_vector macros in
asterisk/vector.h.
Review: https://reviewboard.asterisk.org/r/2883/
........
r400181 | dlee | 2013-09-30 13:48:57 -0500 (Mon, 30 Sep 2013) | 28 lines
Remove dispatch object allocation from Stasis publishing
While looking for areas for performance improvement, I realized that an
unused feature in Stasis was negatively impacting performance.
When a message is sent to a subscriber, a dispatch object is allocated
for the dispatch, containing the topic the message was published to, the
subscriber the message is being sent to, and the message itself.
The topic is actually unused by any subscriber in Asterisk today. And
the subscriber is associated with the taskprocessor the message is being
dispatched to.
First, this patch removes the unused topic parameter from Stasis
subscription callbacks.
Second, this patch introduces the concept of taskprocessor local data,
data that may be set on a taskprocessor and provided along with the data
pointer when a task is pushed using the ast_taskprocessor_push_local()
call. This allows the task to have both data specific to that
taskprocessor, in addition to data specific to that invocation.
With those two changes, the dispatch object can be removed completely,
and the message is simply refcounted and sent directly to the
taskprocessor.
Review: https://reviewboard.asterisk.org/r/2884/
........
Merged revisions 399887,400138,400178,400180-400181 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400186 65c4cc65-6c06-0410-ace0-fbb531ad65f3
app_queue currently attempts to handle Local channel optimizations in an effort
to provide accurate information in Stasis messages (and their corresponding
AMI events) as well as the Queue log. Sometimes, however, things don't go as
planned.
Consider the following scenario:
SIP/foo <-> L;1 <-> L;2 <-> SIP/agent
SIP/agent answers, triggering a Local channel optimization. app_queue will
normally do the following:
* Listen for the Local optimization events and update our agent accordingly
to SIP/agent in the queue log and messages
* When we get a hangup, publish the AgentComplete event based on our
information (SIP/foo and SIP/agent)
However, as with all things that depend on sanity from something as capricious
as Local channels, things can go wrong:
(1) SIP/agent immediately hangs up upon answering. This triggers a race
condition between termination messages coming from SIP/agent and the
ongoing Local channel optimization messages. (Note that this can also
occur with SIP/foo)
(2) In a race condition, Asterisk can (rarely) deliver the hangup messages
prior to the Local channel optimization.
In that case, the messages *may* arrive to app_queue in the following order:
* Hangup SIP/Agent
* Hangup SIP/foo
* Optimize L;1/L;2
* Hangup L;2
* Hangup L;1
When app_queue receives the hangup of the agent or the caller, it will attempt
to publish the AgentComplete event. However, it now has a problem - it thinks
its agent is the ;1 side of the Local channel, as it never received the
optimization event. At the same time, that channel is already gone. This
results in getting NULL from the Stasis cache. What's more, we can't really
wait for the optimization message, as we are currently handling the hangup
of the channel that the optimization event would tell us to use.
This patch modifies the behavior in app_queue such that, since we still have a
lot of pertinent queue information (interface, queue name, etc.), we now raise
the event with what information we know. The channels involved now may or may
not be present. Users will still at least get the "AgentComplete" event, which
"completes" the known Agent information.
Review: https://reviewboard.asterisk.org/r/2878/
(closes issue ASTERISK-22507)
Reported by: Richard Mudgett
........
Merged revisions 400060 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400061 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If the channel variable MONITOR_EXEC is set, app_queue will pass the specified
execution parameters to the MixMonitor application when a queue is recorded.
If that channel variable is not set, the buffer that holds the escaped value
was not being initialized to NULL, and so would be passed to the MixMonitor
application with garbage. Hilarity ensued as app_mixmonitor attempted to
execute gobeldy-gook.
........
Merged revisions 399681 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399682 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Confbridge would not properly tear down an empty conference bridge when all
users were kicked via end_marked=yes and at least one user was also set to
wait_marked. This occurred because while end_marked users were being kicked
and at least one was also set to wait_marked then the leave wait_marked handler
would be called on that user, but there would be no waiting user (still
considered active). The waiting users would decrement and now be negative. The
conference would remain, but be put into an inactive state. The solution was
to move from the active list to the wait list, those users with wait_marked set
right before kicking. This allows both the active and wait users to decrement
correctly and the confbridge to tear down properly.
A crashed also occurred when trying to list the specific conference from the CLI.
This happened because the conference specified was invalid. Since the
conference properly tears down now there is no way to reference it thus
alleviating the crash as well.
(closes issue ASTERISK-21859)
Reported by: Chris Gentle
Review: https://reviewboard.asterisk.org/r/2848/
........
Merged revisions 399222 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 399225 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399226 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fixes regression introduced by -r374096.
* Made res_speech.export.in export ast_* symbols instead of specific
functions.
* Made app_speech_utils.c declare that it is dependent upon res_speech.
(issue ASTERISK-17136)
Reported by: Richard Kenner
........
Merged revisions 399197 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399198 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The Dial, Queue, and FollowMe applications need to inhibit the bridging
initial connected line exchange in order to support the 'I' option.
* Replaced the pass_reference flag on ast_bridge_join() with a flags
parameter to pass other flags defined by enum ast_bridge_join_flags.
* Replaced the independent flag on ast_bridge_impart() with a flags
parameter to pass other flags defined by enum ast_bridge_impart_flags.
* Since the Dial, Queue, and FollowMe applications are now the only
callers of ast_bridge_call() and ast_bridge_call_with_flags(), changed the
calling contract to require the initial COLP exchange to already have been
done by the caller.
* Made all callers of ast_bridge_impart() check the return value. It is
important. As a precaution, I also made the compiler complain now if it
is not checked.
* Did some cleanup in parking_tests.c as a result of checking the
ast_bridge_impart() return value.
An independent, but associated change is:
* Reduce stack usage in ast_indicate_data() and add a dropping redundant
connected line verbose message.
(closes issue ASTERISK-22072)
Reported by: Joshua Colp
Review: https://reviewboard.asterisk.org/r/2845/
........
Merged revisions 399136 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399138 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Refactored cases where a combination of ast_verbose/options_verbose were
present. Also in general tried to eliminate, in as many places as possible,
where the options_verbose global variable was being used. Refactored the way
local and remote consoles handle verbose message logging in an attempt to
solve the various discrepancies that sometimes would show between the two.
(closes issue AST-1193)
Reported by: Guenther Kelleter
Review: https://reviewboard.asterisk.org/r/2798/
........
Merged revisions 397948 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 397958 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397959 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r397921 | mmichelson | 2013-08-29 10:42:10 -0500 (Thu, 29 Aug 2013) | 6 lines
Resolve assumptions that bridge snapshots would be non-NULL for transfer stasis events.
Attempting to transfer an unbridged call would result in crashes in either CEL code or
in the conversion to AMI messages.
........
r397922 | mmichelson | 2013-08-29 10:42:29 -0500 (Thu, 29 Aug 2013) | 3 lines
Remove extra debug message.
........
Merged revisions 397921-397922 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397923 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds a new dialplan application, SayAlphaCase, that performs much
the same function as SayAlpha except that it takes additional options
which allow the user to specify whether the case of each letter should
be announced for uppercase, lowercase, or all letters. Similar
functionality has been added to the SAY ALPHA AGI command via an
optional parameter.
Original Patch by: Kevin Scott Adams
Reported by: Kevin Scott Adams
Review: https://reviewboard.asterisk.org/r/2725/
(closes issue ASTERISK-20782)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397493 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The cause code needs to be passed from the disconnecting channel to the
bridge peers if the disconnecting channel dissolves the bridge.
* Made the call to an app_agent_pool agent disconnect with the busy cause
code if the agent does not ack the call in time or hangs up before acking
the call.
(closes issue ASTERISK-22042)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2772/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397472 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This essentially makes app_queue usable again. From reviewboard:
* Reporting of transfers and call completion is done by creating stasis
subscriptions and listening for specific events in order to determine
when the call is finished (either via a transfer or hangup).
* Dial end messages have been added where they were previously missing.
* Queue stats are properly being updated again once calls have finished.
* AgentComplete stasis messages and AMI events are now occurring again.
* Mixmonitor starting has been factored into its own function and uses the
Mixmonitor API now instead of using ast_pbx_run()
In addition to the changes in app_queue, there are several supplementary changes as well:
* Queue logging now differentiates between attended and blind transfers. A
note about this is in the CHANGES file.
* Local channel optimization events now report more information. This
includes which of the two local channels involved is the destination of
the optimization, the channel that is replacing the destination local channel,
and an identifier so that begin and end events can be matched to each other.
The end events are now sent whether the optimization was successful or not and
includes an indicator of whether the optimization was successful.
* Changes were made to features and bridging_basic so that additional flags may
be set on a bridge. This is necessary because the queue requires that its
bridge only allows move-swap local channel optimizations into the bridge.
(closes issue ASTERISK-21517)
Reported by Matt Jordan
(closes issue ASTERISK-21943)
Reported by Matt Jordan
Review: https://reviewboard.asterisk.org/r/2694
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397451 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Added an option flags parameter to interval hooks. Interval hooks now
can specify if the callback will affect the media path or not.
* Added an option flags parameter to the bridge action custom callback.
The action callback now can specify if the callback will affect the media
path or not.
* Made the holding bridge technology reexamine the participant idle mode
option whenever the entertainment is restarted.
* Fixed app_agent_pool waiting agents needlessly starting and stopping MOH
every second by specifying the heartbeat interval hook as not affecting
the media path.
* Fixed app_agent_pool agent alert from restarting the MOH after the alert
beep. The agent entertainment is now changed from MOH to silence after
the alert beep.
* Fixed holding bridge technology to defer starting the entertainment. It
was previously a mixture of immediate and deferred.
* Fixed holding bridge technology to immediately stop the entertainment.
It was previously a mixture of immediate and deferred. If the channel
left the bridging system, any deferred stopping was discarded before
taking effect.
* Miscellaneous holding bridge technology rework coding improvements.
Review: https://reviewboard.asterisk.org/r/2761/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397294 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Queue members who happen to be in multiple queues at the same time may not
have any wrap up time. This problem occurred due to a code change in Asterisk
11.3.0 that unified device state tracking of Queue members in multiple
Queues (which fixed some other problems, but unfortunately caused this one).
This patch fixes the behavior by having the is_member_available function
check the queue's wrap up time and the time of the member's last call, such
that for a particular queue, the member won't be considered available if their
last call is within the wrap up time.
(closes issue ASTERISK-22189)
Reported by: Tony Lewis
Tested by: Tony Lewis
........
Merged revisions 396948 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396949 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When r382230 added an option to not denoise the MeetMe conference (if a user
had a channel whose format's sample rate changed frequently, for example),
the value added was the maximum allowed value for the constants that define
the options for MeetMe in 1.8. Not so in 11 - unfortunately, the option
CONFFLAG_DONT_DENOISE conflicts with CONFFLAG_INTROUESR_VMREC. This patch
fixes that, and also tweaks one of the way in which the constants was
declared for consistency.
Thanks to Tony Mountifield for pointing out the problem and solution.
(closes issue ASTERISK-22269)
Reported by: Tony Mountifield
........
Merged revisions 396944 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396946 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This removes unused code, event types, IE pltypes, and event IE types
where possible and makes several functions private that were once
public. This includes a renumbering of the remaining event and IE types
which breaks binary compatibility with previous versions. The last
remaining consumers of the old event system (or parts thereof) are
main/security_events.c, res/res_security_log.c, tests/test_cel.c,
tests/test_event.c, main/cel.c, and the CEL backends.
Review: https://reviewboard.asterisk.org/r/2703/
(closes issue ASTERISK-22139)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396887 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The feature_attended_transfer test is failing due to Asterisk not
passing DTMF in the bridges created for internal attended transfers.
This sets the features initialization routine to set this flag by
default and adjusts the basic bridge and confbridge's use of the
bridging system accordingly as per Richard's suggestion instead of
adjusting this individual case. This change allows the necessary DTMF
to pass through the attended transfer bridge and complete the test
successfully.
Review: https://reviewboard.asterisk.org/r/2759/
(closes issue ASTERISK-22222)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396724 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Holding bridges can allow local channel move/swap optimization to the
bridge. However, we cannot allow it for the BridgeWait holding bridge
because the call will lose the channel roles and dialplan location as a
result.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396695 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Changed ast_manager_build_bridge_state_string() to assume an empty
prefix string just like ast_manager_build_channel_state_string().
* Created ast_manager_build_bridge_state_string_prefix() to work just like
ast_manager_build_channel_state_string_prefix().
* Made BridgeMerge AMI event use To/From prefixes.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396417 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does three things:
1. It provides a Surrogate channel technology with a consolidated
"implementation detail flag" on the channel technology. This tells
consumers of Stasis that the creation of this channel is an implementation
detail in Asterisk and can be ignored (if they so choose). This
consolidates the conference recorder/announcer flags as well - these flags
had no additional meaning beyond "ignore this channel please".
2. It modifies allocation of a channel in two ways:
(a) If a channel technology can be determined from the name, we set it
directly in the allocation routine. This prevents the initial
publication of the message from going out with a NULL channel technology
where possible. This lets Stasis consumers get the right channel
technology on the first publication.
(b) It reorganizes allocation to make use of the 'finalized' property on the
channel. This was already used to know that a channel had completely
finished its construction in the masquerade routine; now we also use it
to know whether or not the setting of certain channel properties is
occurring during or post construction. The various set routines were
modified accordingly as well.
3. The masquerade event is now dead, Jim. It no longer served any purpose
whatsoever - if you perform a call pickup you'll get a Pickup event;
if you perform an attended transfer you will still get those events; if you
steal a channel to put it elsewhere you'll get the corresponding NewExten or
BridgeEnter events.
Review: https://reviewboard.asterisk.org/r/2740
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396392 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The rna() routine will raise a Stasis message involving both the caller and the
agent. This doesn't work so well if we already hung up the agent channel, as
the channel doesn't quite exist. Not surprisingly, this will crash. This patch
properly runs the rna subroutine (performing all of the Ring-No-Answer logic)
prior to hanging up the agent channel.
(closes issue ASTERISK-22258)
Reported by: Kiril Valchev
Tested by: Kiril Valchev
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396365 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch implements the controls from ARI recordings. The controls
are:
* DELETE /recordings/live/{recordingName} - stop recording and
discard it
* POST /recordings/live/{recordingName}/stop - stop recording
* POST /recordings/live/{recordingName}/pause - pause recording
* POST /recordings/live/{recordingName}/unpause - resume recording
* POST /recordings/live/{recordingName}/mute - mute recording (record
silence to the file)
* POST /recordings/live/{recordingName}/unmute - unmute recording.
Since this underlying functionality did not already exist, is was
added to app.c by a set of control frames, similar to how playback
control works. The pause/mute control frames are toggles, even though
the ARI controls are idempotent, to be consistent with the playback
control frames.
(closes issue ASTERISK-22181)
Review: https://reviewboard.asterisk.org/r/2697/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396331 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit is smaller than the initial review placed on review board. This is because
a change to allow for channel drivers to access parking functionality externally was
committed and invalidated quite a few of the changes initially made.
(closes issue ASTERISK-22039)
reported by Matt Jordan
Review: https://reviewboard.asterisk.org/r/2717
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396103 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
* It moves the pickup code out of features.c and into pickup.c
* It removes the vast majority of dead code out of features.c. In particular,
this includes the parking code.
(issue ASTERISK-22134)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396060 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds the ability in Queue to raise a hint when a member's paused
state changes. The hint uses the form 'Queue:{queue_name}_pause_{member_name}',
where {queue_name} and {member_name} are the name of the queue and the name
of the member to subscribe to, respectively.
For example: exten => 8501,hint,Queue:sales_pause_mark.
Members will show as In Use when paused.
Note that the format of the queue pause hint was changed slightly from what
is on the issue to accomodate suggestion on the code review.
Review: https://reviewboard.asterisk.org/r/2254
(closes issue ASTERISK-20842)
Reported by: Philippe Lindheimer
patches:
qpause-10-378206.diff uploaded by Philippe Lindheimer (license 5519)
qpause-11-378206.diff uploaded by Philippe Lindheimer (license 5519)
qpause-trunk-378206.diff uploaded by Philippe Lindheimer (license 5519)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396010 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This prevents XML documentation duplication by expanding channel and
bridge snapshot tags into channel and bridge snapshot parameter sets
with a given prefix or defaulting to no prefix. This also prevents
documentation from becoming fractured and out of date by keeping all
variations of the documentation in template form such that it only
needs to be updated once and keeps maintenance to a minimum.
Review: https://reviewboard.asterisk.org/r/2708/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395985 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In working with res_stasis, I discovered a significant limitation to
the current structure of stasis_caching_topics: you cannot subscribe
to cache updates for a single channel/bridge/endpoint/etc.
To address this, this patch splits the cache away from the
stasis_caching_topic, making it a first class object. The stasis_cache
object is shared amongst individual stasis_caching_topics that are
created per channel/endpoint/etc. These are still forwarded to global
whatever_all_cached topics, so their use from most of the code does
not change.
In making these changes, I noticed that we frequently used a similar
pattern for bridges, endpoints and channels:
single_topic ----------------> all_topic
^
|
single_topic_cached ----+----> all_topic_cached
|
+----> cache
This pattern was extracted as the 'Stasis Caching Pattern', defined in
stasis_caching_pattern.h. This avoids a lot of duplicate code between
the different domain objects.
Since the cache is now disassociated from its upstream caching topics,
this also necessitated a change to how the 'guaranteed' flag worked
for retrieving from a cache. The code for handling the caching
guarantee was extracted into a 'stasis_topic_wait' function, which
works for any stasis_topic.
(closes issue ASTERISK-22002)
Review: https://reviewboard.asterisk.org/r/2672/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395954 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Most hook callbacks did not need the bridge parameter. The pointer value
could become invalid if the channel is moved to another bridge while it is
executing.
* Fixed some issues in feature_attended_transfer() as a result.
* Reduce the bridge inhibit count in
attended_transfer_properties_shutdown() after it has restored the bridge
channel hooks.
* Removed basic bridge requirement on feature_blind_transfer(). It does
not require the basic bridge like feature_attended_transfer().
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395574 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fixed feature limits to not use special members of struct
ast_bridge_features.
* Fixed memory leak in off nominal paths of bridge_builtin_set_limits().
* Fixed off nominal path in ast_bridge_features_limits_construct() freeing
unallocated memory if it was not called by bridge_builtin_set_limits().
* Made bridge_builtin_interval_features.so unloadable.
* Simplified parking's use of its duration interval hook.
* Made BridgeWait S option not depend upon another module being loaded.
(closes issue ASTERISK-22107)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2701/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395559 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Changes arguments for BridgeWait from BridgeWait(role, options) to
BridgeWait(bridge_name, role, options). Now multiple holding bridges may
be created and referenced by this application.
(closes issue ASTERISK-21922)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2642/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395509 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch renames the bridging* files to bridge*. This may seem pedantic
and silly, but it fits better in line with current Asterisk naming conventions:
* channel is not "channeling"
* monitor is not "monitoring"
etc.
A bridge is an object. It is a first class citizen in Asterisk. "Bridging" is
the act of using a bridge on a set of channels - and the API that fulfills that
role is more than just the action.
(closes issue ASTERISK-22130)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395378 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Reduced the number of hook containers to just dtmf_hooks,
interval_hooks, and other_hooks. As a result, several functions dealing
with the different hook containers could be combined.
* Extended the generic hook struct for DTMF and interval hooks instead of
using a variant record.
* Merged the special talk detector hook into the other_hooks container.
* Replaced ast_bridge_features_set_talk_detector() with
ast_bridge_talk_detector_hook().
(issue ASTERISK-22107)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395322 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
* It pulls out bridge_channel and puts it into its own translation unit
* It adds public and protected headers for bridging_channel. Protected
functions are appropriate only for the Bridging API and sub-classes of a
bridge.
(issue ASTERISK-22130)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395253 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds CEL support for blind and attended transfers and call pickup.
During the course of adding this functionality I noticed that
CONF_ENTER, CONF_EXIT, and BRIDGE_TO_CONF events are particularly
useless without a bridge identifier, so I added that as well.
This adds tests for blind transfers, several types of attended
transfers, and call pickup.
The extra field in CEL records now consists of a JSON blob whose fields
are defined on a per-event basis.
Review: https://reviewboard.asterisk.org/r/2658/
(closes issue ASTERISK-21565)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394858 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds new flags to the channel tech properties that flag it as
different types of implementation detail used exclusively to provide a
feature. Examples of channels that would have these flags include the
announcement and recording channels used by confbridge which are the
only two marked as such by this patch.
Review: https://reviewboard.asterisk.org/r/2633/
(closes issue ASTERISK-21873)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394808 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds more entertainment options to holding bridges and the
bridge_wait application. Also, holding bridges will now use music on
hold as the default entertainment option instead of none. The
parameters for app_bridgewait have changed to (role, options) from
the previous (options) and the options themselves have changed as
well (entertainment options are now contained in an enumerator, role
specification is handled by the role parameter, etc)
(closes issue ASTERISK-21923)
Reported by: Matthew Jordan
Review: https://reviewboard.asterisk.org/r/2679/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394731 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Since ast_hangup() is effectively a channel destructor, it should be a
void function.
* Make the few silly callers checking the return value no longer do so.
Only the CDR and CEL unit tests checked the return value.
* Make all callers take advantage of the NULL safe change and remove the
NULL check before the call.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394623 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds the ability to kick all users out of a conference from the
ConfBridge kick CLI command. It is invoked by passing 'all' as the channel
parameter to the CLI command, i.e., "confbridge kick <conf> all".
Note that this patch was modified slightly to conform to trunk.
(closes issue ASTERISK-21827)
Reported by: dorianlogan
patches:
kickall-patch_v2.diff uploaded by dorianlogan (License 6504)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394531 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The ill conceived chan_agent is no more. It is now replaced by
app_agent_pool.
Agents login using the AgentLogin() application as before. The
AgentLogin() application no longer does any authentication.
Authentication is now the responsibility of the dialplan. (Besides, the
authentication done by chan_agent did not match what the voice prompts
asked for.)
Sample extensions.conf
[login]
; Sample agent 1001 login
; Set COLP for in between calls so the agent does not see the last caller COLP.
exten => 1001,1,Set(CONNECTEDLINE(all)="Agent Waiting" <1001>)
; Give the agent DTMF transfer and disconnect features when connected to a caller.
same => n,Set(CHANNEL(dtmf-features)=TX)
same => n,AgentLogin(1001)
same => n,NoOp(AGENT_STATUS is ${AGENT_STATUS})
same => n,Hangup()
[caller]
; Sample caller direct connect to agent 1001
exten => 800,1,AgentRequest(1001)
same => n,NoOp(AGENT_STATUS is ${AGENT_STATUS})
same => n,Hangup()
; Sample caller going through a Queue to agent 1001
exten => 900,1,Queue(agent_q)
same => n,Hangup()
Sample queues.conf
[agent_q]
member => Local/800@caller,,SuperAgent,Agent:1001
Under the hood operation overview:
1) Logged in agents wait for callers in an agents holding bridge.
2) Caller requests an agent using AgentRequest()
3) A basic bridge is created, the agent is notified, and caller joins the
basic bridge to wait for the agent.
4) The agent is either automatically connected to the caller or must ack
the call to connect.
5) The agent is moved from the agents holding bridge to the basic bridge.
6) The agent and caller talk.
7) The connection is ended by either party.
8) The agent goes back to the agents holding bridge.
To avoid some locking issues with the agent holding bridge, I needed to
make some changes to the after bridge callback support. The after bridge
callback is now a list of requested callbacks with the last to be added
the only active callback. The after bridge callback for failed callbacks
will always happen in the channel thread when the channel leaves the
bridging system or is destroyed.
(closes issue ASTERISK-21554)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2657/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394417 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When QUEUE_MEMBER is used and the member specified is not in the queue,
Asterisk provides an ERROR message that indicates that the option specified
is not valid. This patch now properly displays an ERROR message that the
member is not in the queue if an interface is specified.
(closes issue ASTERISK-21980)
Reported by: Avraam David
........
Merged revisions 394345 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394346 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The SLA code within app_meetme was written before asotbj2 had been
merged into Asterisk. Worse, support for reloads did not exist at first
and was added later as a bolt-on feature. I knew at the time that
reloading was not safe at all while SLA was in use, so the reload would
be queued up to execute when the system was idle. Unfortunately, this
approach was still prone to errors beyond the fact that this was the
only place in Asterisk where configuration was not reloaded
instantly when requested.
This patch converts various SLA objects to be reference counted objects
using astobj2. This allows reloads to be processed while the system is
in use. The code ensures that the objects will not disappear while one
of the other threads is using them. However, they will be immediately
removed from the global trunk and station containers so no new calls
will use them if removed from configuration.
Review: https://reviewboard.asterisk.org/r/2581/
........
Merged revisions 393928 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 393929 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393930 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is the first step in adding recording support to the
Asterisk REST Interface.
Recordings are stored in /var/spool/recording. Since recordings may be
destructive (overwriting existing files), the API rejects attempts to
escape the recording directory (avoiding issues if someone attempts to
record to ../../lib/sounds/greeting, for example).
(closes issue ASTERISK-21594)
(closes issue ASTERISK-21581)
Review: https://reviewboard.asterisk.org/r/2612/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393550 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The option had not been converted to use the replacement for
ast_bridged_channel(). One touch mixmonitor now records files again.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393487 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In addition to porting those features, they now enjoy greater feature parity
with one another. Specifically, AutoMixMon now has a start and stop
message that can be specified with TOUCH_MIXMONITOR_MESSAGE_START and
TOUCH_MIXMONITOR_MESSAGE_STOP.
(closes issue ASTERISK-21553)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2620/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393309 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There was a misunderstanding about ast_bridge_impart()'s handling of the
imparted channel's reference. The channel reference is passed by the
caller unless ast_bridge_impart() returns an error.
* Fixed a memory leak in conf_announce_channel_push() if the impart
failed.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392934 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change removes AST_CEL_BRIDGE_UPDATE since it should no longer be
used because masquerade situations are now accounted for in other ways.
This also refactors usage of AST_CEL_FORWARD to be produced by a Dial
message which has been extended with a "forward" field.
(closes issue ASTERISK-21566)
Review: https://reviewboard.asterisk.org/r/2635/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392829 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The menuselect parser is very simple. It looks for AST_MODULE_INFO and
uses any quoted string on that line as the module summary display.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392777 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is the initial push to update Asterisk's CDR engine for the new
bridging framework. This patch guts the existing CDR engine and builds the new
on top of messages coming across Stasis. As changes in channel state and bridge
state are detected, CDRs are built and dispatched accordingly. This
fundamentally changes CDRs in a few ways.
(1) CDRs are now *very* reflective of the actual state of channels and bridges.
This means CDRs track well with what an actual channel is doing - which
is useful in transfer scenarios (which were previously difficult to pin
down). It does, however, mean that CDRs cannot be 'fooled'. Previous
behavior in Asterisk allowed for CDR applications, channels, and other
properties to be spoofed in parts of the code - this no longer works.
(2) CDRs have defined behavior in multi-party scenarios. This behavior will not
be what everyone wants, but it is a defined behavior and as such, it is
predictable.
(3) The CDR manipulation functions and applications have been overhauled. Major
changes have been made to ResetCDR and ForkCDR in particular. Many of the
options for these two applications no longer made any sense with the new
framework and the (slightly) more immutable nature of CDRs.
There are a plethora of other changes. For a full description of CDR behavior,
see the CDR specification on the Asterisk wiki.
(closes issue ASTERISK-21196)
Review: https://reviewboard.asterisk.org/r/2486/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391947 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In r386792, the ability to play prompts to the first caller in a call queue was
added. While this is arguably a bug fix for those who expect the first caller
to continue receiving prompts while the agent is dialed, it has the side effect
of preventing the first caller from hearing the agent immediately upon
bridging. This may not be a problem for those who really want this option, but
for those who didn't care whether or not the first caller in queue heard their
position, it was an issue.
This patch disables the ability for the first caller in the queue to hear
prompts and adds a new option, announce-to-first-user, to queues.conf. Those
who the behavior can enable it by setting this value to True.
Note that if we ever implement the ability to have the prompts be stopped
upon bridging, this option can be removed.
(closes issue ASTERISK-21782)
Reported by: Remi Quezada
........
Merged revisions 391215 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 391241 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391245 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Features configuration is handled in its own API in
features_config.h and features_config.c. This way, features
configuration is accessible to anything that needs it.
In addition, features configuration has been altered to
be more channel-oriented. Most callers of features API
code will be supplying a channel so that the individual
channel's settings will be acquired rather than the global
setting.
Missing from this commit is XML documentation for the
features configuration. That will be handled in a separate
commit.
Review: https://reviewboard.asterisk.org/r/2578/
(issue ASTERISK-21542)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390751 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Refactor some channel blob publishing code to use
ast_channel_publish_blob now that it is available and fix a JSON
reference leak that was occurring during varset publishing.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390317 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When ast_channel_cached_blob_create was merged,
ast_channel_blob_create_from_cache was partially removed in an
unresolved merge conflict. This restores ast_channel_blob_create_from_cache
and refactors usage of ast_channel_cached_blob_create (requires an
ast_channel) to use ast_channel_blob_create_from_cache (requires a
channel uniqueid) instead.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389974 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The attended transfer API call can complete the attended transfer in a number of ways
depending on the current bridged states of the channels involved.
The hiding of masquerades is done in some bridging-related functions, such as the manager
Bridge action and the Bridge dialplan application. In addition, call pickup was edited
to "move" a channel rather than masquerade it.
Review: https://reviewboard.asterisk.org/r/2511
(closes issue ASTERISK-21334)
Reported by Matt Jordan
(closes issue Asterisk-21336)
Reported by Matt Jordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389848 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch moves a number of AMI events over to the Stasis-Core message bus.
This includes:
* ChanSpyStart/Stop
* MonitorStart/Stop
* MusicOnHoldStart/Stop
* FullyBooted/Reload
* All Voicemail/MWI related events
In addition, it adds some Stasis-Core and AMI support for generic AMI messages,
refactors the message router in AMI to use a single router with topic
forwarding for the topics that AMI cares about, and refactors MWI message
types and topics to be more name compliant.
Review: https://reviewboard.asterisk.org/r/2532
(closes issue ASTERISK-21462)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389733 65c4cc65-6c06-0410-ace0-fbb531ad65f3
New in 12 are the ConfBridgeMute/Unmute events, which are triggered when a user
changes their mute/unmute state. This was typically triggered when a user hit a
DTMF key that triggered the mute/unmute menu handler. Forgotten in this is when an
AMI action or CLI command triggers the mute/unmute. This patch now raises the
events in those situations as well.
(closes issue ASTERISK-21802)
Reported by: Birger "WIMPy" Harzenetter
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389402 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Breaks many things until they can be reworked. A partial list:
chan_agent
chan_dahdi, chan_misdn, chan_iax2 native bridging
app_queue
COLP updates
DTMF attended transfers
Protocol attended transfers
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389378 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When this option was added, it was noted in CHANGES, but was missing
the XML documentation that this patch adds.
(closes issue ASTERISK-21780)
Patch-by: Brad Latus (snuffy)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389202 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In r388005, macros were introduced to consistently define message
types. This added an assert if a message type was used either before
it was initialized or after it had been cleaned up. It turns out that
this assertion fires during shutdown.
This actually exposed a hidden shutdown ordering problem. Since
unsubscribing is asynchronous, it's possible that the message types
used by the subscription could be freed before the final message of
the subscription was processed.
This patch adds stasis_subscription_join(), which blocks until the
last message has been processed by the subscription. Since joining was
most commonly done right after an unsubscribe, a
stasis_unsubscribe_and_join() convenience function was also added.
Similar functions were also added to the stasis_caching_topic and
stasis_message_router, since they wrap subscriptions and have similar
problems.
Other code in trunk was refactored to join() where appropriate, or at
least verify that the subscription was complete before being
destroyed.
Review: https://reviewboard.asterisk.org/r/2540
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389011 65c4cc65-6c06-0410-ace0-fbb531ad65f3
