Add Doxygen to the Debian install list. I will check for other platforms like Red Hat
(issue ASTERISK-20259)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@374897 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch changes the Asterisk configure script and build system to detect
the presence of the NetBSD editline library (libedit) on the system. If it is
found, it will be used in preference to the version included in the Asterisk
source tree.
(closes issue ASTERISK-18725)
Reported by: Jeffrey C. Ollie
Review: https://reviewboard.asterisk.org/r/1528/
Patches:
0001-Allow-linking-building-against-an-external-editline.patch uploaded by jcollie (license #5373) (heavily modified by kpfleming)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370481 65c4cc65-6c06-0410-ace0-fbb531ad65f3
contrib/scripts/live_ast currently assumes that it is being run from the
top-level directory of the source tree. It creates a script that will
also set the working directory.
This fix avoids the need to set the working directory if the caller sets
LIVE_AST_BASE_DIR instead.
It relies on realpath for that. If realpath is not available, it will
fall back to the original behaviour.
Review: https://reviewboard.asterisk.org/r/2027/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370048 65c4cc65-6c06-0410-ace0-fbb531ad65f3
actually remove res_ais. This commit removes it.
In addition, the 'install_prereq' script has been updated to no longer install
AIS dependency packages, and instead install Corosync packages instead.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354459 65c4cc65-6c06-0410-ace0-fbb531ad65f3
be empty, don't check for it, instead of check if LD_LIBRARY_PATH is
already set and if so, append LIVE_AST_LD_PATH_EXTRA properly.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354314 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r350788 | kpfleming | 2012-01-14 09:22:33 -0600 (Sat, 14 Jan 2012) | 8 lines
Ensure that two prerequisites are properly installed on Debian-style distributions.
* Don't specify a specific version of libgmime; newer versions are available
now and acceptable.
* Install libsrtp so that res_srtp can be built.
........
r350789 | kpfleming | 2012-01-14 09:23:32 -0600 (Sat, 14 Jan 2012) | 3 lines
Correct some 'set-but-not-used' variable warnings.
........
Merged revisions 350788-350789 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 350790 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@350791 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r350127 | rmudgett | 2012-01-09 12:40:33 -0600 (Mon, 09 Jan 2012) | 12 lines
Update contrib script live_ast to invoke Asterisk with valgrind and suppression file.
* Added valgrind_compare script to compare two valgrind log files for
differences.
(issue ASTERISK-17339)
Reported by: Tzafrir Cohen
Patches:
valgrind_compare (license #5035) script uploaded by Tzafrir Cohen
live_ast_valgrind.diff (license #5035) patch uploaded by Tzafrir Cohen
live_ast_valgrind_v2.diff (license #5185) patch uploaded by Paul Belanger
........
r350128 | rmudgett | 2012-01-09 12:54:56 -0600 (Mon, 09 Jan 2012) | 11 lines
live_ast: valgrind: run asterisk under valgrind
Adds a new sub-command, "valgrind" to live_ast. It runs asterisk under
valgrind. The extra command-line parameters are passed to Asterisk as
usual, and parameters to valgrind are passed through LIVE_AST_VALGRIND_ARGS
in live.conf .
Review: https://reviewboard.asterisk.org/r/1109/
Merged revisions 326636 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 350127-350128 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 350129 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@350130 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added information collection from the output of the utilities: top, free, uptime, ifconfig
Added information collection from the output of the Asterisk command 'dahdi show status'
Added option / flag '-n, --non-interactive'
Updated man page to reflect new option / flag '-n, --non-interactive'
Patch-by: John Bigelow (itzanger)
(closes issue AST-749)
........
Merged revisions 349504 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 349505 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@349506 65c4cc65-6c06-0410-ace0-fbb531ad65f3
environment variables and also enables a custom run directory for asterisk
(instead of defaulting to /tmp).
Patch by: Byron Clark (byronclark)
(closes ASTERISK-17810)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@348698 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adds a new sub-command, "valgrind" to live_ast. It runs asterisk under
valgrind. The extra command-line parameters are passed to Asterisk as
usual, and parameters to valgrind are passed through LIVE_AST_VALGRIND_ARGS
in live.conf .
Review: https://reviewboard.asterisk.org/r/1109/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@326636 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Several variables in the script control which files are converted and the
source and destination formats.
Patch-by: Trey Blancher <support@digium.com>
(closes AST-560)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@326368 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r292787 | lmadsen | 2010-10-22 16:28:43 -0500 (Fri, 22 Oct 2010) | 21 lines
Merged revisions 292786 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r292786 | lmadsen | 2010-10-22 16:16:12 -0500 (Fri, 22 Oct 2010) | 13 lines
Update the LDIF file for LDAP.
The LDIF file asterisk.ldif was quite a bit out of date from the asterisk.ldap-schema file, so I've
now updated that to be in sync. The asterisk.ldif file being out of sync was a problem on my systems
where I was doing an ldapadd to import the schema into the LDAP database, and the existing file
would cause problems and ERROR messages when registering.
Additional documention has been added based on feedback in the issue I'm closing.
(closes issue #13861)
Reported by: scramatte
Patches:
ldap-update.txt uploaded by lmadsen (license 10)
Tested by: lmadsen, jcovert, suretec, rgenthner
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@292788 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r292740 | twilson | 2010-10-22 09:49:34 -0700 (Fri, 22 Oct 2010) | 45 lines
Add TLS cert helper script
This script is useful for quickly generating self-signed CA, server, and client
certificates for use with Asterisk. It is still recommended to obtain
certificates from a recognized Certificate Authority and to develop an
understanding how SSL certificates work. Real security is hard work.
OPTIONS:
-h Show this message
-m Type of cert "client" or "server". Defaults to server.
-f Config filename (openssl config file format)
-c CA cert filename (creates new CA cert/key as ca.crt/ca.key if not passed)
-k CA key filename
-C Common name (cert field)
For a server cert, this should be the same address that clients
attempt to connect to. Usually this will be the Fully Qualified
Domain Name, but might be the IP of the server. For a CA or client
cert, it is merely informational. Make sure your certs have unique
common names.
-O Org name (cert field)
An informational string (company name)
-o Output filename base (defaults to asterisk)
-d Output directory (defaults to the current directory)
Example:
To create a CA and a server (pbx.mycompany.com) cert with output in /tmp:
ast_tls_cert -C pbx.mycompany.com -O "My Company" -d /tmp
This will create a CA cert and key as well as asterisk.pem and the the two
files that it is made from: asterisk.crt and asterisk.key. Copy asterisk.pem
and ca.crt somewhere (like /etc/asterisk) and set tlscertfile=/etc/asterisk.pem
and tlscafile=/etc/ca.crt. Since this is a self-signed key, many devices will
require you to import the ca.crt file as a trusted cert.
To create a client cert using the CA cert created by the example above:
ast_tls_cert -m client -c /tmp/ca.crt -k /tmp/ca.key -C "Joe User" -O \
"My Company" -d /tmp -o joe_user
This will create client.crt/key/pem in /tmp. Use this if your device supports
a client certificate. Make sure that you have the ca.crt file set up as
a tlscafile in the necessary Asterisk configs. Make backups of all .key files
in case you need them later.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@292743 65c4cc65-6c06-0410-ace0-fbb531ad65f3
