From a user point-of-view, this adds new CLI commands and Manager Actions to
better facilitate the reloading of queues and the resetting of their statistics.
The new CLI commands are the "queue reload" and "queue reset stats" commands.
The new manager actions are the QueueReload and QueueReset commands.
Review: http://reviewboard.digium.com/r/115
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@175663 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds forceencryption=yes as an iax.conf option. When force encryption is enabled, no unencrypted connections are allowed. This insures all connections are encrypted. This is a new feature, so CHANGES and iax.conf.sample are updated as well.
(closes issue #13285)
Reported by: sgofferj
Tested by: russell
Review: http://reviewboard.digium.com/r/150/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@175344 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is very similar to the DAHDI immediate=yes option. When the phone is picked up, instead of giving a dialtone it connects directly to the "s" extension. Changes where implemented in chan_iax2.c to directly connect to the "s" extension in the appropriate context when this option is enabled. Examples explaining its use are added to iax2.conf.sample. CHANGES has been updated as well.
(closes issue #14266)
Reported by: jcovert
Patches:
chan_iax2.c.patch-trunk uploaded by jcovert (license 551)
iax.conf.sample.patch uploaded by jcovert (license 551)
Tested by: jcovert, dvossel
Review: http://reviewboard.digium.com/r/143/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@174046 65c4cc65-6c06-0410-ace0-fbb531ad65f3
to be used within the dial app, before a call is bridged.
Many thanks to sobomax for submitting this patch.
Quoting from bug 11582:
"So the goal of the patch was to use the user configured feature code during the
call setup phase. The original ast_feature_interpret() function is not well suited
for this purpose as it uses much call bridge specific data and doesn't separate a
detection of feature from a feature handler call. So a new function ast_feature_detect()
has been extracted off the ast_feature_interpret() function but keeping the original
logic intact except some insignificant changes to locking.
"Having created the ast_feature_detect() function the possibility to use feature detection
in almost any place of the asterisk code. So a call to this function has been added to
wait_for_answer() function of app_dial.so module. This code doesn't call the feature handler
however and uses old call leg disconnect logic to make the changes as small and simple as
possible to prevent unexpected problems. A disconnect feature currently is the only one
supported during call setup as other features as call parking and call transfer don't make much
sense during call setup. However if need in some of the features would arise it is much easier to
implement as the infrastructure changes are already in place with this patch."
I have cleaned up the patch somewhat, and verified that the existing functionality is not
harmed, and that the new functionality works. Terry has committed his stuff, and there were
no conflicts (see 14274).
(closes issue #11583)
Reported by: sobomax
Patches:
patch-apps__app_dial.c uploaded by sobomax (license 359)
patch-include__asterisk__features.h uploaded by sobomax (license 359)
patch-res__res_features.c uploaded by sobomax (license 359)
enable-features-during-call-setup.diff uploaded by sobomax (license 359)
11583.newdiff uploaded by murf (license 17)
enable-features-during-call-setup-1.diff uploaded by sobomax (license 359)
11583.latest-patch uploaded by murf (license 17)
Tested by: sobomax, murf
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@172890 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r172517 | twilson | 2009-01-30 11:47:41 -0600 (Fri, 30 Jan 2009) | 37 lines
Fix feature inheritance with builtin features
When using builtin features like parking and transfers, the AST_FEATURE_* flags
would not be set correctly for all instances when either performing a builtin
attended transfer, or parking a call and getting the timeout callback. Also,
there was no way on a per-call basis to specify what features someone should
have on picking up a parked call (since that doesn't involve the Dial() command).
There was a global option for setting whether or not all users who pickup a
parked call should have AST_FEATURE_REDIRECT set, but nothing for DISCONNECT,
AUTOMON, or PARKCALL.
This patch:
1) adds the BRIDGE_FEATURES dialplan variable which can be set either in the
dialplan or with setvar in channels that support it. This variable can be set
to any combination of 't', 'k', 'w', and 'h' (case insensitive matching of the
equivalent dial options), to set what features should be activated on this
channel. The patch moves the setting of the features datastores into the
bridging code instead of app_dial to help facilitate this.
2) adds global options parkedcallparking, parkedcallhangup, and
parkedcallrecording to be similar to the parkedcalltransfers option for
globally setting features.
3) has builtin_atxfer call builtin_parkcall if being transfered to the parking
extension since tracking everything through multiple masquerades, etc. is
difficult and error-prone
4) attempts to fix all cases of return calls from parking and completed builtin
transfers not having the correct permissions
(closes issue #14274)
Reported by: aragon
Patches:
fix_feature_inheritence.diff.txt uploaded by otherwiseguy (license 396)
Tested by: aragon, otherwiseguy
Review http://reviewboard.digium.com/r/138/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@172580 65c4cc65-6c06-0410-ace0-fbb531ad65f3
With this commit, a register => line in sip.conf may contain a port number in the
"user" section of the line. Please see CHANGES and sip.conf.sample for more
details regarding this.
(closes issue #14198)
Reported by: Nick_Lewis
Patches:
chan_sip.c-domainport2.patch uploaded by Nick (license 657)
Tested by: Nick_Lewis
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@168575 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds the functionality to app_queue of calculating
the average amount of time that channels are bridged for a
queue. The algorithm used to calculate the average is the same
exponential average currently used to calculate the average holdtime.
See the CHANGES file to see the methods you may use to view this
information.
(closes issue #13960)
Reported by: coolmig
Patches:
app_queue.c.diff.trunk-r158840 uploaded by coolmig (license 621)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@167792 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This function is being added as a method to allow for
an audiohook to move to a new channel during a channel
masquerade. The most obvious use for such a facility is
for MixMonitor when a transfer is performed. Prior to
the addition of this functionality, if a channel
running MixMonitor was transferred by another party, then
the recording would stop once the transfer had completed.
By using AUDIOHOOK_INHERIT, you can make MixMonitor
continue recording the call even after the transfer
has completed.
It has also been determined that since this is seen
by most as a bug fix and is not an invasive change,
this functionality will also be backported to 1.4 and
merged into the 1.6.0 branches, even though they are
feature-frozen.
(closes issue #13538)
Reported by: mbit
Patches:
13538.patch uploaded by putnopvut (license 60)
Tested by: putnopvut
Review: http://reviewboard.digium.com/r/102/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@166092 65c4cc65-6c06-0410-ace0-fbb531ad65f3
enabled (either globally or for a specific peer), chan_sip will treat any SDP
data it receives as new data and update the media stream accordingly. By
default, Asterisk will only modify the media stream if the SDP session version
received is different from the current SDP session version. This option is
required to interoperate with devices that have non-standard SDP session
version implementations (observed by toc on the bug tracker with Microsoft OCS
which always uses 0 as the session version).
http://reviewboard.digium.com/r/94/
(closes issue #13958)
Reported by: toc
Tested by: toc
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@165180 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Terry Wilson created the original patch for this functionality, which I slightly modified and added
the faxdetect=yes|no configuration option. This patch is only for T38 fax detection and does not
do anything for G711 over SIP fax detection. By default, this option is disabled.
Reviewboard: http://reviewboard.digium.com/r/69/
This functionality is for issue AST-140.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@161115 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Based on cli_permissions.conf configuration file, we are able to permit or deny
cli commands based on some patterns and the local user and group running rasterisk.
(Sorry if I missed some of the testers).
Reviewboard: http://reviewboard.digium.com/r/11/
(closes issue #11123)
Reported by: eliel
Tested by: eliel, IgorG, Laureano, otherwiseguy, mvanbaak
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@160062 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Add CLI aliases module to asterisk.
- Remove all deprecated CLI commands from the code
Initial work done by file.
Junk-Y and lmadsen did a lot of work and testing to
get the list of deprecated commands into the configuration file.
Deprecated CLI commands are now handled by this new module,
see cli_aliases.conf for more info about that.
ok russellb@ via reviewboard
(closes issue #13735)
Reported by: mvanbaak
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@156120 65c4cc65-6c06-0410-ace0-fbb531ad65f3
remotesecret => our password for a remote service
secret => our authentication when someone calls us
Secret => still has both functions if remotesecret is not used.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@153904 65c4cc65-6c06-0410-ace0-fbb531ad65f3
had no effect
* Updated dialing API documentation to indicate that timeouts
are specified in milliseconds
* Added a new timeout argument to the Page application. If time
expires, any endpoints which have not answered will be hung up.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@153223 65c4cc65-6c06-0410-ace0-fbb531ad65f3
the low default value of featuredigittimeout, I decided it
was high time to change it. I have changed the default to
2000 ms based on a suggestion from Leif Madsen.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@152807 65c4cc65-6c06-0410-ace0-fbb531ad65f3
for more details of this command.
(closes issue #13326)
Reported by: ib2
Patches:
bug13326_trunk_20080822.diff uploaded by snuffy (license 35)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@150311 65c4cc65-6c06-0410-ace0-fbb531ad65f3
and "leavewhenempty" options are configured in queues.conf.
Instead of using vague terms like "yes," "no," "loose," and
"strict," we now accept a comma-separated list of values
to determine when to consider a member available.
Extended details can be found in the queues.conf.sample
file. Note also that the above four referenced values are
still accepted for backwards-compatibility, but are mapped
internally to the new method of representing the option.
AST-105
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@146640 65c4cc65-6c06-0410-ace0-fbb531ad65f3
call-id in the dialog-info event package used with extension state subscriptions
on Snom phones. Then, when the phone sends an INVITE with Replaces for the
special callid, Asterisk will perform a pickup on the extension that was
subscribed to.
The original code on this issue was submitted by xylome. However, contributions
have been made by (at least) mgernoth and pkempgen. The final patch was written
by seanbright, and includes the necessary logic to allow this work in a
technology independent way.
(closes issue #5014)
Reported by: xylome
Patches:
issue5014-trunk.diff uploaded by seanbright (license 71)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@145226 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This will print the subs and their status for every line (if any).
wedhorn did most of the work with his patch which introduced
'skinny show debug' but a discussion on IRC stated that it should be
added to 'skinny show lines'
Input on the output format by Qwell on IRC.
(closes issue #13344)
Reported by: wedhorn
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@140938 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: erousseau
This was a reasonable enhancement request, which was
easy to implement. Since it's an enhancement, it
could only be applied to trunk.
Basically, for accounting where "initiated" seconds
are billed for, if the microseconds field on the end
time is greater than the microseconds field for the
answer time, add one second to the billsec field.
The implementation was requested by erousseau, and
I've implemented it as requested. I've updated the
CHANGES, the cdr.conf.sample, and the .h files
accordingly, to accept and set a flag for the
corresponding new option. cdr.c adds in the extra
second based on the usec fields if the option is
set. Tested, seems to be working fine.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@140057 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This set of changes enhances IAX2 encryption support by adding key rotation
to provide enhanced security. The key used for encryption is rotated right
after the call gets set up, and then again every few minutes. This was
discussed at the last AstriDevCon. For interoperability with older versions
of Asterisk, there is an option that disables key rotation.
(closes issue #13018)
Reported by: bbryant
Patches:
07072008__iax2_key_rotation.diff uploaded by bbryant (license 36)
Tested by: russell, bbryant
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@135158 65c4cc65-6c06-0410-ace0-fbb531ad65f3
driver into a common place for multiple channel drivers.
(closes issue #13152)
Reported by: caio1982
Patches:
atxfer_complete_sound3.diff uploaded by caio1982 (license 22)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@134401 65c4cc65-6c06-0410-ace0-fbb531ad65f3
implementations. Asterisk has, for a long time,
had its own implementation of poll(2) which
just used the input arguments to call select(2).
In 1.4, this internal implementation was used
for Darwin systems. This was removed in Asterisk
trunk at some point, but it seems as though this
was not the right move to make.
On Mac OS X, it appears as though the poll used
to gather CLI input does not respond properly
when connecting via a remote Asterisk console.
Reverting to the use of Asterisk's poll fixed
the issue.
Also, there is now an option for the configure
script, --enable-internal-poll, which will allow
for anyone to use Asterisk's internal poll
implementation in case they suspect that their
system's poll implementation is buggy.
closes issue #11928)
Reported by: adriavidal
Patches:
1.6.0-configurev2.patch uploaded by putnopvut (license 60)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@134125 65c4cc65-6c06-0410-ace0-fbb531ad65f3
fail to setup video RTP if the two endpoints will not support it. This assists
with call files and certain transfers to ensure that if two video phones are
ever connected, they will always share a video feed.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@130951 65c4cc65-6c06-0410-ace0-fbb531ad65f3
acceptdtmf and enddtmf. These allow for the DTMF pressed to be configurable
instead of being hardcoded to '#' and '*'.
(AST-86)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@127558 65c4cc65-6c06-0410-ace0-fbb531ad65f3
to how language is handled between two channels whose native
language is different. Prior to this patch, app_dial would have
the callee inherit the caller's language, and app_queue would not.
After this patch, app_dial no longer has the language inheritance
capability. This seems to make the most sense since it seems more
natural for a person to hear files played back in his/her native
language instead of the language of the person on the far end of
the call. See the CHANGES file for hints on how to keep the
previous behavior of app_dial if desired.
(closes issue #12489)
Reported by: bcnit
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@125647 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r122127 | murf | 2008-06-12 08:51:44 -0600 (Thu, 12 Jun 2008) | 1 line
Arkadia tried to warn me, but the code added to ast_cdr_busy, _failed, and _noanswer was redundant. Didn't spot it until I was resolving conflicts in trunk. Ugh. Redundant code removed. It wasn't harmful. Just dumb.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@122128 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r122046 | murf | 2008-06-12 07:47:34 -0600 (Thu, 12 Jun 2008) | 37 lines
(closes issue #10668)
Reported by: arkadia
Tested by: murf, arkadia
Options added to forkCDR() app and the CDR() func to
remove some roadblocks for CDR applications.
The "show application ForkCDR" output was upgraded
to more fully explain the inner workings of forkCDR.
The A option was added to forkCDR to force the
CDR system to NOT change the disposition on the
original CDR, after the fork. This involves
ast_cdr_answer, _busy, _failed, and so on.
The T option was added to forkCDR to force
obedience of the cdr LOCKED flag in the
ast_cdr_end, all the disposition changing
funcs (ast_cdr_answer, etc), and in the
ast_cdr_setvar func.
The CHANGES file was updated to explain ALL
the new options added to satisfy this bug report
(and some requests made verbally and via
email, irc, etc, over the past months/year)
The 's' option was added to the CDR() func,
to force it to skip LOCKED cdr's in the
chain.
Again, the new options should be totally transparent
to existing apps! Current behavior of CDR,
forkCDR, and the rest of the CDR system should
not change one little bit. Until you add the
new options, at least!
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@122091 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit merges in the rest of the code needed to support distributed device
state. There are two main parts to this commit.
Core changes:
- The device state handling in the core has been updated to understand device
state across a cluster of Asterisk servers. Every time the state of a device
changes, it looks at all of the device states on each node, and determines the
aggregate device state. That resulting device state is what is provided to
modules in Asterisk that take actions based on the state of a device.
New module, res_ais:
- A module has been written to facilitate the communication of events between
nodes in a cluster of Asterisk servers. This module uses the SAForum AIS
(Service Availability Forum Application Interface Specification) CLM and EVT
services (Cluster Management and Event) to handle this task. This module
currently supports sharing Voicemail MWI (Message Waiting Indication) and
device state events between servers. It has been tested with openais, though
other implementations of the spec do exist.
For more information on testing distributed device state, see the following doc:
- doc/distributed_devstate.txt
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@121559 65c4cc65-6c06-0410-ace0-fbb531ad65f3
where the entered phone number is checked.
You can now define a set of extensions/exten patterns that describe
valid phone numbers. PrivacyManager will check that context for a match
with the given phone number.
This way you get better control. For example people blindly hitting
10 digits just to get past privacymanager
Example line in extensions.conf:
exten => incoming,n,PrivacyManager(3,10,,route-outgoing)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@121197 65c4cc65-6c06-0410-ace0-fbb531ad65f3
a dynamic realtime queue member is added to the queue, and the
REMOVEMEMBER event is logged when a dynamic realtime member is
removed. Since no calling channel is associated with these events
the string "REALTIME" is placed where the channel's unique id is
normally placed.
(closes issue #12774)
Reported by: atis
Patches:
queue_log_rt_members.patch uploaded by atis (license 242)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@120166 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r118646 | file | 2008-05-28 11:23:34 -0300 (Wed, 28 May 2008) | 4 lines
Add an option to use the source IP address of RTP as the destination IP address of UDPTL when a specific option is enabled. If the remote side is properly configured (ports forwarded) then UDPTL will flow.
(closes issue #10417)
Reported by: cstadlmann
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@118647 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a deadlock is detected, then the typical lock information will be
printed along with a backtrace of the stack for the offending threads.
Use of this requires compiling with DETECT_DEADLOCKS and having glibc
installed.
Furthermore, issuing the "core show locks" CLI command will print the
normal lock information as well as a backtraces for each lock. This
requires that DEBUG_THREADS is enabled and that glibc is installed.
All the backtrace features may be disabled by running the configure
script with --without-execinfo as an argument
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@118173 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If you give chanisavail a list of channels, it will only
return the first available channel.
When this option is set, it will return all the available
channels from the given list.
(closes issue #12248)
Reported by: dagmoller
Patches:
app_chanisavail-snv.patch-v2.txt uploaded by dagmoller (license 436)
- major changes by me because russellb pointed out some buffer overflows
and codeguideline issues.
Converted it all to the ast_str_* api
Tested by: dagmoller, mvanbaak
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@118101 65c4cc65-6c06-0410-ace0-fbb531ad65f3
(closes issue #12705)
Reported by: ctooley
Patches:
new_externalivr_argument_format-v2.diff uploaded by ctooley (license 136)
new_externalivr_documentation.diff uploaded by ctooley (license 136)
and a few additional fixes by me
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@117725 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Joshua Colp
Mark Michelson
Kevin P. Fleming
Dwayne M. Hubbard
David Vossel
Steve Murphy
Terry Wilson
Olle Johansson
Russell Bryant
Michiel van Baak
Tilghman Lesher
Matthew Nicholson
Eliel C. Sardanons
BJ Weschke
Philippe Sultan
Jeff Peeler
Sean Bright
Brett Bryant