Testsuite tests will occasionally fail because on reception of a 200 OK SIP response,
an AST_CONTROL_ANSWER frame is queued prior to when media has finished being
negotiated. This is because session supplements are called into before PJSIP's
inv_session code has told us that media has been updated. Sometimes the queued answer
frame is handled by the PBX thread before the ensuing media negotiations occur, causing
a test failure.
As it turns out, there is another place that session supplements could be called into, which is
after media has finished getting negotiated. What this commit introduces is a means for session
supplements to indicate when they wish to be called into when handling an incoming SIP response.
By default, all session supplements will be run at the same point that they were prior to this
commit. However, session supplements may indicate that they wish to be handled earlier than
normal on redirects, or they may indicate they wish to be handled after media has been negotiated.
In this changeset, two session supplements have been updated to indicate a preference for when
they should be run: res_pjsip_diversion executes before handling redirection in order to get
information from the Diversion header, and chan_pjsip now handles responses to INVITEs after
media negotiation to fix the race condition mentioned previously.
ASTERISK-24212 #close
Reported by Matt Jordan
Review: https://reviewboard.asterisk.org/r/3930
........
Merged revisions 422536 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 422542 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422543 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When ARI manipulates a bridge, it generally doesn't care what the mixing
technology is. Operations on a bridge initiated through ARI should perform
their action in generally the same way, regardless of the bridge's mixing
technology. While the mixing technology may determine how media flows to
channels, the actual operations on a bridge themselves should be the same.
Currently, this isn't the case with holding bridges. When a channel joins
without a role, MoH is started on that channel automatically. Subsequent bridge
operations that would stop MoH would fail (as there is no Announcer channel
playing MoH to the bridge). Starting MoH on the bridge will also create two
MoH streams: one from the MoH being played on the participant channel, and one
from the announcer channel. From the perspective of ARI users, this is
counter-intuitive - I would not expect MoH to be started for me. The mixing
technology determines how media is shared between participants, not the
application experience.
This patch does the following:
* The Stasis bridge class now inspects channels as they are going into a
bridge. If the bridge has a holding capability, and the channel has no
roles, we give it a participant role and mark the default behaviour to have
no entertainment. This allows addChannel operations to continue to set a
participant role with an entertainment option if it felt like it (or could
do it).
* The music on hold channel is now Stasis approved (tm)
Review: https://reviewboard.asterisk.org/r/3929/
ASTERISK-24264 #close
Reported by: Samuel Galarneau
Tested by: Samuel Galarneau
........
Merged revisions 422503 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 422504 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422505 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A misunderstanding of how the scheduler worked caused further batched notifications
beyond the first not to get scheduled. Now we reset our scheduler ID to -1 after
the batched notification is sent. This way, further notifications can be scheduled
when they arise.
........
Merged revisions 422239 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@422240 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In order to alter the Contact header on in-dialog requests and responses the
Websocket module must be attached on outgoing INVITEs. The Contact header is
modified so that the PJSIP transport layer can find and use the existing
Websocket connection based on the source IP address, port, and transport.
ASTERISK-24143 #close
Reported by: Aleksei Kulakov
........
Merged revisions 421955 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 421956 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421957 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The packet structure used to receive messages was using the transport
pool. This meant that for each parsing the pool would grow accordingly.
Since memory can not be reclaimed without resetting it this would
cause the memory pool to grow and grow.
This change uses a specific memory pool for the packet structure and
resets it to a fresh state after the message has been received and
handled.
........
Merged revisions 421939 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 421945 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421950 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this change, the Remote-Party-ID header took the position of
"If caller name and number are not explicitly allowed, then they are private"
and P-Asserted-Identity took the position of
"Caller name and number are only private if marked explicitly so"
Now both mechanisms of conveying party identification use the former approach.
........
Merged revisions 421778 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 421783 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421785 65c4cc65-6c06-0410-ace0-fbb531ad65f3
On a SIP reinvite that changes media strams, the PJSIP channel driver was
flooding the log with "Asked to transmit frame type %s, while native
formats is %s" warnings.
* Fixes PJSIP not setting up translation paths when the formats change on
a reinvite. AFS-63 was effectively reintroduced because of the media
formats work. res_pjsip_sdp_rtp.c:set_caps()
* Improved the unexpected frame format WARNING message to include more
information.
* Added protective locking while altering formats on a channel. Reworked
set_format() to simplify and protect the formats under manipulation.
* Restored some code that got lost in the media_formats work.
(channel.c:set_format() and res_pjsip_sdp_rtp.c:set_caps())
AFS-137 #close
Reported by: Mark Michelson
Review: https://reviewboard.asterisk.org/r/3906/
........
Merged revisions 421645 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421646 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a blind transfer occurs that is forced to create a local channel
pair to satisfy the transfer request, information about the local
channel pair is not published. This adds a field to describe that
channel to the blind transfer message struct so that this information
is conveyed properly to consumers of the blind transfer message.
This also fixes a bug in which Stasis() was unable to properly identify
the channel that was replacing an existing Stasis-controlled channel
due to a blind transfer.
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3921/
........
Merged revisions 421537 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 421538 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421539 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If /channels/{channelID}/continue is called on a channel that was originated
without a PBX (such as the ARI command POST channel with a stasis application
argument), the channel will not start dialplan execution. This patch will now
run the PBX out of the stasis execution if the channel doesn't currently have
an active PBX upon continuing.
ASTERISK-24043 #close
Reported by: Krandon Bruse
Review: https://reviewboard.asterisk.org/r/3917/
Patches:
stasis-continue.diff submitted by Krandon Bruse (license 6631)
........
Merged revisions 421416 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 421423 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421424 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A calls B
B answers
B SIP attended transfers to C
C answers, B and C can see each other's connected line information
B completes the transfer
A has number but no name connected line information about C
while C has the full information about A
I examined the incoming and outgoing party id information handling of
chan_pjsip and found several issues:
* Fixed ast_sip_session_create_outgoing() not setting up the configured
endpoint id as the new channel's caller id. This is why party A got
default connected line information.
* Made update_initial_connected_line() use the channel's CALLERID(id)
information. The core, app_dial, or predial routine may have filled in or
changed the endpoint caller id information.
* Fixed chan_pjsip_new() not setting the full party id information
available on the caller id and ANI party id. This includes the configured
callerid_tag string and other party id fields.
* Fixed accessing channel party id information without the channel lock
held.
* Fixed using the effective connected line id without doing a deep copy
outside of holding the channel lock. Shallow copy string pointers can
become stale if the channel lock is not held.
* Made queue_connected_line_update() also update the channel's
CALLERID(id) information. Moving the channel to another bridge would need
the information there for the new bridge peer.
* Fixed off nominal memory leak in update_incoming_connected_line().
* Added pjsip.conf callerid_tag string to party id information from
enabled trust_inbound endpoint in caller_id_incoming_request().
AFS-98 #close
Reported by: Mark Michelson
Review: https://reviewboard.asterisk.org/r/3913/
........
Merged revisions 421400 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 421403 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421404 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r421311 | mjordan | 2014-08-17 20:11:28 -0500 (Sun, 17 Aug 2014) | 9 lines
res/ari/resource_channels: Don't return allocation failure on failed function
If a function fails to execute, it is most likely due to one of two reasons:
(1) The function doesn't exist or can't be read from
(2) The function is dangerous and is restricted based on the user's permissions
Currently we return allocation failure, which is incorrect. This updates the
reason code to more accurately reflect why the request failed.
ASTERISK-24215
........
r421312 | mjordan | 2014-08-17 20:13:41 -0500 (Sun, 17 Aug 2014) | 4 lines
res/ari/resource_channels: Fix compilation issue
Forgot a parameter. Whoops.
........
Merged revisions 421311-421312 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421313 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch addresses a few issues:
1) The order of Dial events have been changed when performing a call forward.
The order has now been altered to
1) Dial begins dialing channel A.
2) When A forwards the call to B, we issue the dial end event to channel
A, indicating the dial is being canceled due to a forward to B.
3) When the call to channel B occurs, we then issue a new dial begin to
channel B.
2) Call forwards are now reported on the calling channel, not the peer channel.
3) AMI DialEnd events have been altered to display the extension the call is
being forwarded to when relevant.
4) You can now get the values of channel variables for channels that are not
currently in the Stasis application. This brings the retrieval of channel
variables more in line with the rest of channel read operations since they
may be performed on channels not in Stasis.
ASTERISK-24134 #close
Reported by Matt Jordan
ASTERISK-24138 #close
Reported by Matt Jordan
Patches:
forward-shenanigans.diff uploaded by Matt Jordan (License #6283)
Review: https://reviewboard.asterisk.org/r/3899
........
Merged revisions 420794 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421310 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The res_hep_rtcp module was incorrectly including <pjsip.h>. This didn't need
to be included, as the module does not using PJPROJECT any fashion.
Unfortunately, because res_hep_rtcp did not include pjsip in its MODULEINFO as
a dependency, this also meant that res_hep_rtcp will fail to compile on a
system without PJPROJECT.
This patch removes the include.
Thanks to Damien Wedhorn for pointing this out in #asterisk-dev.
ASTERISK-24236 #close
Reported by: Damien Wedhorn, Matt Jordan
Tested by: Damien Wedhorn
........
Merged revisions 421064 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 421065 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@421066 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The unit tests require a sorcery.conf file that has been
set up to store resource lists in memory rather than retrieving
from configuration.
With a setup that is not conducive to running the tests, a fault
in sorcery currently causes Asterisk to crash when attempting to
run any of the tests.
To get around the crash, this adds a function that verifies the
current environment and marks the tests as "not run" if the setup
is not correct.
........
Merged revisions 420779 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420780 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Running testsuite tests locally produced no errors, but when
run using the continuous integration framework, crashes occurred.
The crashes occurred due to a refcounting error that had been fixed
for a similar situation.
........
Merged revisions 420758 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420759 65c4cc65-6c06-0410-ace0-fbb531ad65f3
These modules were originally specified as being disabled, as they were
introduced midstream in Asterisk 12. That makes it nicer for folks who are
upgrading to a new release in the middle of Asterisk 12. That's not the case
for Asterisk 13: it's a brand new release. There's no reason to have the
modules disabled by default in that case.
........
Merged revisions 420742 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420743 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit adds the ability for a user to configure
a resource list in pjsip.conf. Subscribing to this
list simultaneously subscribes the subscriber to all
resources listed. This has the potential to reduce
the amount of SIP traffic when loads of subscribers
on a system attempt to subscribe to each others' states.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420384 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This module uses the inbound and outbound PUBLISH support to exchange device and mailbox
state between Asterisk instances. Each instance is configured to publish to the other and
requires no intermediary server. The functionality provided is similar to the XMPP and
Corosync support.
Review: https://reviewboard.asterisk.org/r/3780/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420315 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This introduces stasis.conf and a mechanism to prevent certain message
types from being published. Internally, this works by preventing the
chosen message types from being created which ensures that those
message types can never be published. This patch also adjusts message
publishers such that message payloads are not created if the related
message type is not available.
ASTERISK-23943 #close
Review: https://reviewboard.asterisk.org/r/3823/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420124 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r420089 | mjordan | 2014-08-05 15:10:52 -0500 (Tue, 05 Aug 2014) | 72 lines
ARI: Add channel technology agnostic out of call text messaging
This patch adds the ability to send and receive text messages from various
technology stacks in Asterisk through ARI. This includes chan_sip (sip),
res_pjsip_messaging (pjsip), and res_xmpp (xmpp). Messages are sent using the
endpoints resource, and can be sent directly through that resource, or to a
particular endpoint.
For example, the following would send the message "Hello there" to PJSIP
endpoint alice with a display URI of sip:asterisk@mycooldomain.org:
ari/endpoints/sendMessage?to=pjsip:alice&from=sip:asterisk@mycooldomain.org&body=Hello+There
This is equivalent to the following as well:
ari/endpoints/PJSIP/alice/sendMessage?from=sip:asterisk@mycooldomain.org&body=Hello+There
Both forms are available for message technologies that allow for arbitrary
destinations, such as chan_sip.
Inbound messages can now be received over ARI as well. An ARI application that
subscribes to endpoints will receive messages from those endpoints:
{
"type": "TextMessageReceived",
"timestamp": "2014-07-12T22:53:13.494-0500",
"endpoint": {
"technology": "PJSIP",
"resource": "alice",
"state": "online",
"channel_ids": []
},
"message": {
"from": "\"alice\" <sip:alice@127.0.0.1>",
"to": "pjsip:asterisk@127.0.0.1",
"body": "Watson, come here.",
"variables": []
},
"application": "testsuite"
}
The above was made possible due to some rather major changes in the message
core. This includes (but is not limited to):
- Users of the message API can now register message handlers. A handler has
two callbacks: one to determine if the handler has a destination for the
message, and another to handle it.
- All dialplan functionality of handling a message was moved into a message
handler provided by the message API.
- Messages can now have the technology/endpoint associated with them.
Various other properties are also now more easily accessible.
- A number of ao2 containers that weren't really needed were replaced with
vectors. Iteration over ao2_containers is expensive and pointless when
the lifetime of things is well defined and the number of things is very
small.
res_stasis now has a new file that makes up its structure, messaging. The
messaging functionality implements a message handler, and passes received
messages that match an interested endpoint over to the app for processing.
Note that inadvertently while testing this, I reproduced ASTERISK-23969.
res_pjsip_messaging was incorrectly parsing out the 'to' field, such that
arbitrary SIP URIs mangled the endpoint lookup. This patch includes the
fix for that as well.
Review: https://reviewboard.asterisk.org/r/3726
ASTERISK-23692 #close
Reported by: Matt Jordan
ASTERISK-23969 #close
Reported by: Andrew Nagy
........
r420090 | mjordan | 2014-08-05 15:16:37 -0500 (Tue, 05 Aug 2014) | 2 lines
Remove automerge properties :-(
........
r420097 | mjordan | 2014-08-05 16:36:25 -0500 (Tue, 05 Aug 2014) | 2 lines
test_message: Fix strict-aliasing compilation issue
........
Merged revisions 420089-420090,420097 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420098 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds a large swath of response documentation for PJSIPShowEndpoint
and PJSIPShowEndpoints AMI commands. It relies heavily on the existing
text in the configInfo documentation via xi:include tags to avoid
documentation duplication.
Review: https://reviewboard.asterisk.org/r/3888/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419914 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Now when running PJSIPShowEndpoint, you will receive a
ContactStatusDetail for each bound contact that Asterisk
is qualifying. This information includes the URI of the
contact, current reachability, and roundtrip time.
AFS-91 #close
Reported by Mark Michelson
Review: https://reviewboard.asterisk.org/r/3797
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419888 65c4cc65-6c06-0410-ace0-fbb531ad65f3