To avoid the stream name collide if there're more than one video track
in one client. If client has multi video tracks, the name of ast_stream
which represents each video track may be the same. Use the MSID:LABEL
here because it's identifiable.
ASTERISK-28196 #close
Reported-by: xiemchen
Change-Id: Ib62b2886e8d3a30e481d94616b0ceaeab68a870b
This ensures that Asterisk responds properly to frames received from a
client with opcode 8 (CLOSE) by echoing back the status code in its own
CLOSE frame.
Handling of the CLOSE opcode is moved up with the rest of the opcodes so
that unmasking gets applied. The payload is no longer returned to the
caller, but neither ARI nor the chan_sip nor pjsip made use of the
payload, which is a good thing since it was masked.
ASTERISK-28231 #close
Change-Id: Icb1b60205fc77ee970ddc91d1f545671781344cf
The transport management code that checks for idle connections keeps a
reference to PJSIP's transport for IDLE_TIMEOUT milliseconds (32000 by
default). Because of this, if the transport is closed before this
timeout, the idle checking code will keep the transport from actually
being shutdown until the timeout expires.
Rather than passing the AO2 object to the scheduler task, we just pass
its key and look it up when it is time to potentially close the idle
connection. The other transport management code handles cleaning up
everything else for us.
Additionally, because we use the address of the transport when
generating its name, we concatenate an incrementing ID to the end of the
name to guarantee uniqueness.
Related to ASTERISK~28231
Change-Id: I02ee9f4073b6abca9169d30c47aa69b5e8ae9afb
Previously both AMI and ARI used a default route on
their stasis message router to handle some of the
messages for publishing out their respective
connection. This caused messages to be given to
their subscription that could not be formatted
into AMI or JSON.
This change adds an API call to the stasis message
router which allows a default route to be set as well
as formatters that the default route is expecting.
This allows both AMI and ARI to specify that their
default route only wants messages of their given
formatter. By doing so stasis can more intelligently
filter at publishing time so that they do not receive
messages which will not be turned into AMI or JSON.
ASTERISK-28244
Change-Id: I65272819a53ce99f869181d1d370da559a7d1703
When --enable-dev-mode is used, pjsip_tpmgr_receive_packet() will assert
if passed a payload length of 0, so treat empty frames as if we didn't
receive them.
Change-Id: I9c5fdccd89cc8d2f3ed7e3ee405ef0fc78178f48
The commit I2f97ebfa79969a36a97bb7b9afd5b6268cf1a07d removed sending out
the ContactStatus AMI event when a contact is updated.
Thist change broke things which rely on old behavior.
This patch adds a new PJSIP global configuration option
'send_contact_status_on_update_registration' to be able to preserve old
ContactStatus behavior.
By default new behavior, i.e. the ContactStatus event will not be sent when a
device refreshes its registration.
Change-Id: I706adf7584e7077eb6bde6d9799ca408bc82ce46
For video streams it was possible for the abs-send-time information
to be placed into RTP streams even if not negotiated. Depending on
the endpoint in use this could cause video to not flow.
We now only enable abs-send-time for negotiation if WebRTC is enabled.
ASTERISK-28230
Change-Id: I0eb682302f8da3a4ea3c42e839208d55f825ed0c
The remote side may start a new stream when renegotiating RTP.
Need to reset the DTMF last sequence number and the timestamp
of the last END packet on RTP renegotiation.
If the new time stamp is lower then the timestamp of the last DTMF END packet
the asterisk drops all DTMF frames as out of order.
This bug was caught using Cisco ip-phone SPA5XX and codec g722.
On SIP session update the SPA50X resets stream and a new timestamp is twice
smaller then the previous.
ASTERISK-28162 #close
Change-Id: Ic72b4497e74d801b27a635559c1cf29c16c95254
All of the fields that were removed were no longer referenced except for
'lastrxts' and 'rxseqno' which were only ever written to.
Change-Id: I5a5d31eb33e97663843698f58d0d97f22a76627c
The profile-iop octet (the 2nd) of profile-level-id can be zero
according to RFC 6184 Section 8.1. So we ignore its value when deciding
to include profile-level-id in the outgoing SDP.
ASTERISK-27959 #close
Reported by: David Kuehling
Change-Id: Id28cd916a3d7748058fe9609b585d07d9e243f73
The ARI DELETE /channels command takes a "reason" parameter
Previously, there were only five reasons implemented
This patch adds more reasons to choose from for more
complex setups
ASTERISK-28198 #close
Change-Id: I85996f1076c9946d65c778413f040a845a90fecc
* The bridging core no longer uses the stasis cache for bridge
snapshots. The latest bridge snapshot is now stored on the
ast_bridge structure itself.
* The following APIs are no longer available since the stasis cache
is no longer used:
ast_bridge_topic_cached()
ast_bridge_topic_all_cached()
* A topic pool is now used for individual bridge topics.
* The ast_bridge_cache() function was removed since there's no
longer a separate container of snapshots.
* A new function "ast_bridges()" was created to retrieve the
container of all bridges. Users formerly calling
ast_bridge_cache() can use the new function to iterate over
bridges and retrieve the latest snapshot directly from the
bridge.
* The ast_bridge_snapshot_get_latest() function was renamed to
ast_bridge_get_snapshot_by_uniqueid().
* A new function "ast_bridge_get_snapshot()" was created to retrieve
the bridge snapshot directly from the bridge structure.
* The ast_bridge_topic_all() function now returns a normal topic
not a cached one so you can't use stasis cache functions on it
either.
* The ast_bridge_snapshot_type() stasis message now has the
ast_bridge_snapshot_update structure as it's data. It contains
the last snapshot and the new one.
* cdr, cel, manager and ari have been updated to use the new
arrangement.
Change-Id: I7049b80efa88676ce5c4666f818fa18ad1985369
When a channel snapshot was created it used to be done
from scratch, copying all data (many strings). This incurs
a cost when doing so.
This change segments the channel snapshot into different
components which can be reused if unchanged from the
previous snapshot creation, reducing the cost. In normal
cases this results in some pointers being copied with
reference count being bumped, some integers being set,
and a string or two copied. The other benefit is that it
is now possible to determine if a channel snapshot update
is redundant and thus stop it before a message is published
to stasis.
The specific segments in the channel snapshot were split up
based on whether they are changed together, how often they
are changed, and their general grouping. In practice only
1 (or 0) of the segments actually get changed in normal
operation.
Invalidation is done by setting a flag on the channel when
the segment source is changed, forcing creation of a new
segment when the channel snapshot is created.
ASTERISK-28119
Change-Id: I5d7ef3df963a88ac47bc187d73c5225c315f8423
Channels no longer use the Stasis cache for channel snapshots. Instead
they are stored in a hash table in stasis_channels which reduces the
number of Stasis messages created and allows better storage.
As a result the following APIs are no longer available since the stasis
cache is no longer used:
ast_channel_topic_cached()
ast_channel_topic_all_cached()
The ast_channel_cache_all() and ast_channel_cache_by_name() functions
now return an ao2_container of ast_channel_snapshots rather than
a container of stasis_messages therefore you can't (and don't need
to) call stasis_cache functions on it.
The ast_channel_topic_all() function now returns a normal topic not
a cached one so you can't use stasis cache functions on it either.
The ast_channel_snapshot_type() stasis message now has the
ast_channel_snapshot_update structure as it's data. It contains the
last snapshot and the new one.
ast_channel_snapshot_get_latest() still returns the latest snapshot.
The latest snapshot is now stored on the channel itself to eliminate
cache hits when Stasis messages that have the snapshot as a payload
are created.
ASTERISK-28102
Change-Id: I9334febff60a82d7c39703e49059fa3a68825786
The marker bit set on the voice packet indicates the start
of a new stream and a new time stamp.
Need to reset the DTMF last sequence number and the timestamp
of the last END packet.
If the new time stamp is lower then the timestamp of the last DTMF END packet
the asterisk drops all DTMF frames as out of order.
This bug was caught using Cisco ip-phone SPA50X and codec g722.
On SIP session update the SPA50X resets stream indicating it with market bit
and a new timestamp is twice smaller then the previous.
ASTERISK-28162 #close
Change-Id: If9c5742158fa836ad549713a9814d46a5d2b1620
Replace usage of ao2_container_alloc with ao2_container_alloc_hash or
ao2_container_alloc_list. Remove ao2_container_alloc macro.
Change-Id: I0907d78bc66efc775672df37c8faad00f2f6c088
This change adds the ability for subscriptions to indicate
which message types they are interested in accepting. By
doing so the filtering is done before being dispatched
to the subscriber, reducing the amount of work that has
to be done.
This is optional and if a subscriber does not add
message types they wish to accept and set the subscription
to selective filtering the previous behavior is preserved
and they receive all messages.
There is also the ability to explicitly force the reception
of all messages for cases such as AMI or ARI where a large
number of messages are expected that are then generically
converted into a different format.
ASTERISK-28103
Change-Id: I99bee23895baa0a117985d51683f7963b77aa190
The res_ari(POST /channels/create handler) deos not check the endpoint
parameter length. And it causes core
dump.
Fixed it to check the parameter length. Also fixed memory leak.
ASTERISK-28169
Change-Id: Ibf10a9eb8a2e3a9ee1e13fbe748b2ecf955c3993
PJSIP assumes that these header names are not allocated, does not clone
the name strings when reusing headers.
Block unload of res_pjsip_caller_id until shutdown to ensure static
memory stays valid. It was previously unsafe to unload while any
sessions are active.
Change-Id: I190854dea943d6e441cf03733f8a0da661aea27f
The presence of Record-Route in re-invites is optional, thus it is
important to make sure the dialog doesn't have a routset before
rewriting the contact header.
ASTERISK-28129 #close
Change-Id: Ic8ceb54ccfc93f7e315e476c514a2c777f2da7dc
When Asterisk's taskprocessors get overloaded we need to reduce the work
load. res_pjsip currently ignores new SIP requests and relies on SIP
retransmissions in the hope that the overload condition will clear soon
enough to handle the retransmitted SIP request.
This change adds the following code after ast_taskprocessor_alert_get()
has returned TRUE:
1- identifies transport type. If non-udp then send a 503 response
2- if transport type is udp/udp6 then ignore, as before.
Change-Id: I1c230b40d43a254ea0f226b7acf9ee480a5d3836
The use of a '|' in the "global/debug" synopsis documentation caused the
generated html table on the wiki to add an extra column that included the
text after the pipe.
This patch replaces the pipe with a comma.
ASTERISK-28150
Change-Id: I3d79a6ca6d733d9cb290e779438114884b98a719
The current round-robin method does not take the current taskprocessor
load into consideration when distributing requests. Using the least-size
method the request goes to the taskprocessor that is servicing the least
number of active tasks at the current time.
Longer running tasks with the round-robin method can delay processing
tasks.
* Change the algorithm from round-robin to least-size for picking the
PJSIP taskprocessor from the default serializer pool.
Change-Id: I7b8d8cc2c2490494f579374b6af0a4868e3a37cd
This patch adds new options 'trust_connected_line' and 'send_connected_line'
to the endpoint.
The option 'trust_connected_line' is to control if connected line updates
are accepted from this endpoint.
The option 'send_connected_line' is to control if connected line updates
can be sent to this endpoint.
The default value is 'yes' for both options.
Change-Id: I16af967815efd904597ec2f033337e4333d097cd
The module 'res_pjsip_notify' inefficiently makes a lot of DB requests
on CLI completion on the endpoint.
For example if there are 10k endpoints the module makes 10k requests
of these 10k records.
Even if a part of the endpoint entered
the module makes the same 10k requests and then filtered them by itself.
This patch gathers endpoints container by prefix
and adds all gathered endpoints to completion at once.
ASTERISK-28137 #close
Change-Id: Ic20024912cc77bf4d3e476c4cd853293c52b254b
Add a new global flag to res_pjsip to allow the callerid to be used
as the username in the contact header. This allows chan_pjsip to have
the same behavour as chan_sip
ASTERISK-28087 #close
Change-Id: I9a720e058323f6862a91c62f8a8c1a4b5c087b95