https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r222878 | russell | 2009-10-08 14:45:47 -0500 (Thu, 08 Oct 2009) | 44 lines
Make filestream frame handling safer by isolating frames before returning them.
This patch is related to a number of issues on the bug tracker that show
crashes related to freeing frames that came from a filestream. A number of
fixes have been made over time while trying to figure out these problems, but
there re still people seeing the crash. (Note that some of these bug reports
include information about other problems. I am specifically addressing
the filestream frame crash here.)
I'm still not clear on what the exact problem is. However, what is _very_
clear is that we have seen quite a few problems over time related to unexpected
behavior when we try to use embedded frames as an optimization. In some cases,
this optimization doesn't really provide much due to improvements made in other
areas.
In this case, the patch modifies filestream handling such that the embedded frame
will not be returned. ast_frisolate() is used to ensure that we end up with a
completely mallocd frame. In reality, though, we will not actually have to malloc
every time. For filestreams, the frame will almost always be allocated and freed
in the same thread. That means that the thread local frame cache will be used.
So, going this route doesn't hurt.
With this patch in place, some people have reported success in not seeing the
crash anymore.
(SWP-150)
(AST-208)
(ABE-1834)
(issue #15609)
Reported by: aragon
Patches:
filestream_frisolate-1.4.diff2.txt uploaded by russell (license 2)
Tested by: aragon, russell
(closes issue #15817)
Reported by: zerohalo
Tested by: zerohalo
(closes issue #15845)
Reported by: marhbere
Review: https://reviewboard.asterisk.org/r/386/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@222880 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds a document describing the language prompt submission process,
licensing terms and other issues related to that process. In addition, it
modifies the sound file searching process to support language codes with
any number of suffices (not limited to just "xx" or "xx_YY"), so that prompts
can be named with gender, customer/company, etc. suffices as well.
(closes issue #15771)
Reported by: jtodd
Patches:
language-criteria.txt uploaded by jtodd
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@216006 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Someone asked yesterday, "is there a good reason why we can't just put these
modules in Asterisk?". After a brief discussion, as long as the modules are
clearly set aside in their own directory and not enabled by default, it is
perfectly fine.
For more information about why a module goes in addons, see README-addons.txt.
chan_ooh323 does not currently compile as it is behind some trunk API updates.
However, it will not build by default, so it should be okay for now.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@204413 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r203785 | russell | 2009-06-26 16:16:39 -0500 (Fri, 26 Jun 2009) | 15 lines
Don't fast forward past the end of a message.
This is nice change for users of the voicemail application. If someone gets a
little carried away with fast forwarding through a message, they can easily
get to the end and accidentally exit the voicemail application by hitting the
fast forward key during the following prompt.
This adds some safety by not allowing a fast forward past the end of a message.
(closes issue #14554)
Reported by: lacoursj
Patches:
21761.patch uploaded by lacoursj (license 707)
Tested by: lacoursj
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@203802 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r200991 | kpfleming | 2009-06-16 12:05:38 -0500 (Tue, 16 Jun 2009) | 11 lines
Improve support for media paths that can generate multiple frames at once.
There are various media paths in Asterisk (codec translators and UDPTL, primarily)
that can generate more than one frame to be generated when the application calling
them expects only a single frame. This patch addresses a number of those cases,
at least the primary ones to solve the known problems. In addition it removes the
broken TRACE_FRAMES support, fixes a number of bugs in various frame-related API
functions, and cleans up various code paths affected by these changes.
https://reviewboard.asterisk.org/r/175/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@201056 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The problem came from the fact that a frame read from a format interpreter
was not freed. Adding a call to ast_frfree fixed this. The explanation for
why this caused the problem is a bit complex, but here goes:
There was a problem in all versions of Asterisk where the embedded frame
of a filestream structure was referenced after the filestream was freed. This
was fixed by adding reference counting to the filestream structure. The refcount
would increase every time that a filestream's frame pointer was pointing to an
actual frame of data. When the frame was freed, the refcount would decrease. Once
the refcount reached 0, the filestream was freed, and as part of the operation,
the open files were closed as well.
Thus it becomes more clear why a missing ast_frfree would cause a reference leak
and cause the files to not be closed. You may ask then if there was a frame leak
before this patch. The answer to that is actually no! The filestream code was
"smart" enough to know that since the frame we received came from a format interpreter,
the frame had no malloced data and thus didn't need to be freed. Now, however, there
is cleanup that needs to be done when we finish with the frame, so we do need to
call ast_frfree on the frame to be sure that the refcount for the filestream is
decremented appropriately.
(closes issue #14384)
Reported by: fiddur
Patches:
14384.patch uploaded by putnopvut (license 60)
Tested by: fiddur, putnopvut
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@173354 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A crash was brought up on the bugtracker. The first run through valgrind
was full of legitimate complaints of uninitialized values in func_timeout when
setting a response timeout. These were fixed but the crash persisted.
A second run through showed the real problem. The reference counting used
for filestreams was incorrect because there were some missing increments
when a frame was read from a format module.
(closes issue #14118)
Reported by: blitzrage
Patches:
14118v2.patch uploaded by putnopvut (license 60)
Tested by: blitzrage
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@166267 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: snyfer
This handles the case for a zero length file to attempt to be streamed. Instead of failing from not playing any data, go ahead and return success as ast_streamfile should consider playing nothing a success when there is nothing to play.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@158062 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Convert chan_iax2 to use the timing API
- Convert usage of timing in the core to use the timing API instead of
using DAHDI directly
- Make a change to the timing API to add the set_rate() function
- change the timing core to use a rwlock
- merge a timing implementation, res_timing_dahdi
Basic testing was successful using res_timing_dahdi
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@122523 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- make data member of the ast_frame struct a named union instead of a void
Recently the ast_queue_hangup function got a new parameter, the hangupcause
Feedback came in that this is no good and that instead a new function should be created.
This I did.
The hangupcause was stored in the seqno member of the ast_frame struct. This is not very
elegant, and since there's already a data member that one should be used.
Problem is, this member was a void *.
Now it's a named union so it can hold a pointer, an uint32 and there's a padding in case someone
wants to store another type in there in the future.
This commit is so massive, because all ast_frame.data uses have to be
altered to ast_frame.data.data
Thanks russellb and kpfleming for the feedback.
(closes issue #12674)
Reported by: mvanbaak
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@117802 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r114035 | qwell | 2008-04-10 12:26:10 -0500 (Thu, 10 Apr 2008) | 10 lines
Only try to prefix language if we are not using an absolute path (suffix it otherwise).
en/var/lib/asterisk/sounds/blah.gsm is a very silly path.
(closes issue #12379)
Reported by: kuj
Patches:
12379-absolutepath.diff uploaded by qwell (license 4)
Tested by: kuj, qwell
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114036 65c4cc65-6c06-0410-ace0-fbb531ad65f3
other than 8 kHz. The issue here is that format modules give a "whennext" sample
value, which is used to calculate when to set a timer for to retrieve the next
frame. However, the zaptel timer operates on 8 kHz samples, so this must be taken
into account.
(another part of issue #12164, reported by milazzo and jsmith, patch by me)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@110303 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fix a number of other places where the number of samples in a G722 frame was
not properly handled because of various reasons.
main/rtp.c:
- When a G722 frame is read from the smoother, the number of samples in the
frame must be divided by 2 before being sent out over the network. Even
though G722 is 16 kHz, an error in some previous spec has made it so that
we have to list the number of samples such as if it was 8 kHz.
main/file.c:
- When scheduling the next time to expect a frame, take into account that the
format of the file we're reading from may not be 8 kHz.
codecs/codec_g722.c:
- When converting from G722 to slinear, g722_decode() expects its samples
parameter to be in the silly (real samples / 2) format. Make it so.
- When converting from slinear to G722, properly set the number of samples in
the frame to be the number of bytes of output * 2.
formats/format_pcm.c:
- This format module handles G722, among a number of other formats. However,
the read() and seek() functions did not account for the fact that G722 has
2 samples per byte.
(closes issue #12130, reported by rickross, patched by me)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@106501 65c4cc65-6c06-0410-ace0-fbb531ad65f3
