https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r218798 | russell | 2009-09-16 08:33:43 -0500 (Wed, 16 Sep 2009) | 9 lines
Remove the IAXy firmware from Asterisk.
The firmware can now be found on downloads.digium.com, where the rest of our
binary downloads live. This was the last part of our Asterisk tarballs that
was considered non-free by Debian. :-)
(closes issue #15838)
Reported by: paravoid
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@218799 65c4cc65-6c06-0410-ace0-fbb531ad65f3
It is clear from multiple mailing list, forum, wiki and other sorts of posts
that users don't really understand the effects that the 'canreinvite' config
option actually has, and that in some cases they think that setting it to 'no'
will actually cause various other features (T.38, MOH, etc.) to not work properly,
when in fact this is not the case. This patch changes the proper name of the
option to what it should have been from the beginning ('directmedia'), but
preserves backwards compatibility for existing configurations.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@210190 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Over the past couple of months, a number of issues with Asterisk
negotiating (and successfully completing) T.38 sessions with various
endpoints have been found. This patch attempts to address many of
them, primarily focused around ensuring that the endpoints'
MaxDatagram size is honored, and in addition by ensuring that T.38
session parameter negotiation is performed correctly according to the
ITU T.38 Recommendation.
The major changes here are:
1) T.38 applications in Asterisk (app_fax) only generate/receive IFP
packets, they do not ever work with UDPTL packets. As a result of
this, they cannot be allowed to generate packets that would overflow
the other endpoints' MaxDatagram size after the UDPTL stack adds any
error correction information. With this patch, the application is told
the maximum *IFP* size it can generate, based on a calculation using
the far end MaxDatagram size and the active error correction mode on
the T.38 session. The same is true for sending *our* MaxDatagram size
to the remote endpoint; it is computed from the value that the
application says it can accept (for a single IFP packet) combined with
the active error correction mode.
2) All treatment of T.38 session parameters as 'capabilities' in
chan_sip has been removed; these parameters are not at all like
audio/video stream capabilities. There are strict rules to follow for
computing an answer to a T.38 offer, and chan_sip now follows those
rules, using the desired parameters from the application (or channel)
that wants to accept the T.38 negotiation.
3) chan_sip now stores and forwards ast_control_t38_parameters
structures for tracking 'our' and 'their' T.38 session parameters;
this greatly simplifies negotiation, especially for pass-through
calls.
4) Since T.38 negotiation without specifying parameters or receiving
the final negotiated parameters is not very worthwhile, the
AST_CONTROL_T38 control frame has been removed. A note has been added
to UPGRADE.txt about this removal, since any out-of-tree applications
that use it will no longer function properly until they are upgraded
to use AST_CONTROL_T38_PARAMETERS.
Review: https://reviewboard.asterisk.org/r/310/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@208464 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r204556 | tilghman | 2009-06-30 15:23:51 -0500 (Tue, 30 Jun 2009) | 6 lines
More incorrect language codes, plus ensuring that regionalizations use the specified language, and not English for grammar.
(closes issue #15022)
Reported by: greenfieldtech
Patches:
20090519__issue15022.diff.txt uploaded by tilghman (license 14)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@204563 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Someone asked yesterday, "is there a good reason why we can't just put these
modules in Asterisk?". After a brief discussion, as long as the modules are
clearly set aside in their own directory and not enabled by default, it is
perfectly fine.
For more information about why a module goes in addons, see README-addons.txt.
chan_ooh323 does not currently compile as it is behind some trunk API updates.
However, it will not build by default, so it should be okay for now.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@204413 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There is a lot that could be said about this, but the patch is a big
improvement for performance, stability, code maintainability,
and ease of future code development.
The channel list is no longer an unsorted linked list. The main container
for channels is an astobj2 hash table. All of the code related to searching
for channels or iterating active channels has been rewritten. Let n be
the number of active channels. Iterating the channel list has gone from
O(n^2) to O(n). Searching for a channel by name went from O(n) to O(1).
Searching for a channel by extension is still O(n), but uses a new method
for doing so, which is more efficient.
The ast_channel object is now a reference counted object. The benefits
here are plentiful. Some benefits directly related to issues in the
previous code include:
1) When threads other than the channel thread owning a channel wanted
access to a channel, it had to hold the lock on it to ensure that it didn't
go away. This is no longer a requirement. Holding a reference is
sufficient.
2) There are places that now require less dealing with channel locks.
3) There are places where channel locks are held for much shorter periods
of time.
4) There are places where dealing with more than one channel at a time becomes
_MUCH_ easier. ChanSpy is a great example of this. Writing code in the
future that deals with multiple channels will be much easier.
Some additional information regarding channel locking and reference count
handling can be found in channel.h, where a new section has been added that
discusses some of the rules associated with it.
Mark Michelson also assisted with the development of this patch. He did the
conversion of ChanSpy and introduced a new API, ast_autochan, which makes it
much easier to deal with holding on to a channel pointer for an extended period
of time and having it get automatically updated if the channel gets masqueraded.
Mark was also a huge help in the code review process.
Thanks to David Vossel for his assistance with this branch, as well. David
did the conversion of the DAHDIScan application by making it become a wrapper
for ChanSpy internally.
The changes come from the svn/asterisk/team/russell/ast_channel_ao2 branch.
Review: http://reviewboard.digium.com/r/203/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@190423 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This API provides a generic way for multiple RTP stacks to be
integrated into Asterisk. Right now there is only one present, res_rtp_asterisk,
which is the existing Asterisk RTP stack. Functionality wise this commit
performs the same as previously. API documentation can be viewed in the
rtp_engine.h header file.
Review: http://reviewboard.digium.com/r/209/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@186078 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch includes a number of changes to the indications API. The primary
motivation for this work was to improve stability. The object management
in this API was significantly flawed, and a number of trivial situations could
cause crashes.
The changes included are:
1) Remove the module res_indications. This included the critical functionality
that actually loaded the indications configuration. I have seen many people
have Asterisk problems because they accidentally did not have an
indications.conf present and loaded. Now, this code is in the core,
and Asterisk will fail to start without indications configuration.
There was one part of res_indications, the dialplan applications, which did
belong in a module, and have been moved to a new module, app_playtones.
2) Object management has been significantly changed. Tone zones are now
managed using astobj2, and it is no longer possible to crash Asterisk by
issuing a reload that destroys tone zones while they are in use.
3) The API documentation has been filled out.
4) The API has been updated to follow our naming conventions.
5) Various bits of code throughout the tree have been updated to account
for the API update.
6) Configuration parsing has been mostly re-written.
7) "Code cleanup"
The code is from svn/asterisk/team/russell/indications/.
Review: http://reviewboard.digium.com/r/149/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@176627 65c4cc65-6c06-0410-ace0-fbb531ad65f3
because SPRINTF() use non-literal format strings (which cannot be checked), move it into its own module so the rest of func_strings can benefit from format string checking
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@159774 65c4cc65-6c06-0410-ace0-fbb531ad65f3
also, move UPGRADE.txt to UPGRADE-1.6.txt and make the new UPGRADE.txt contain information about upgrading between Asterisk 1.6 releases
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@157706 65c4cc65-6c06-0410-ace0-fbb531ad65f3
hashing used by app_queue.c to be case-insensitive.
This is accomplished by adding a new case-insensitive
hashing function.
This was necessary to prevent bad refcount errors
(and potential crashes) which would occur due to the
fact that queues were initially read from the config
file in a case-sensitive manner. Then, when a user
issued a CLI command or manager action, we allowed
for case-insensitive input and used that input to
directly try to find the queue in the hash table. The result
was either that we could not find a queue that was input or
worse, we would end up hashing to a completely bogus value
based on the input.
This commit resolves the problem presented in
issue #13703. However, that issue was reported against
1.6.0. Since this fix introduces a behavior change, I am
electing to not place this same fix in to the 1.6.0 or 1.6.1
branches, and instead will opt for a change which does not
change behavior.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@156883 65c4cc65-6c06-0410-ace0-fbb531ad65f3
implementation from using the volatile libtds, to using the db-lib front end.
The unintended side effect of this is that we support (at least) versions 0.62
through 0.82 of the FreeTDS distribution without any #ifdef ugliness.
(closes issue #12844)
Reported by: jcollie
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@126226 65c4cc65-6c06-0410-ace0-fbb531ad65f3
function and begin the transition from SIPCHANINFO() to just using CHANNEL().
(closes issue #12856)
Reported by: mostyn
Patches:
iax_and_sip_channel_info.patch uploaded by mostyn (license 398)
(with some additional cleanup by me)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@122802 65c4cc65-6c06-0410-ace0-fbb531ad65f3
marked "urgent" are considered to be higher priority than other messages
and so they will be played before any other messages in a user's mailbox.
There are two ways to leave an urgent message.
1. send the 'U' option to VoiceMail().
2. Set review=yes in voicemail.conf. This will give instructions for
a caller to mark a message as urgent after the message has been recorded.
I have tested that this works correctly with file and ODBC storage, and James
Rothenberger (who wrote initial support for this feature) has tested its use
with IMAP storage.
(closes issue #11817)
Reported by: jaroth
Based on branch http://svn.digium.com/svn/asterisk/team/jrothenberger/asterisk-urgent
Tested by: putnopvut, jaroth
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@115588 65c4cc65-6c06-0410-ace0-fbb531ad65f3
for the sake of backwards compatibility, since it is a non-trivial task to convert
existing large dialplans that depend on Macro() to use GoSub(), instead.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114931 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r110880 | kpfleming | 2008-03-26 09:42:35 -0700 (Wed, 26 Mar 2008) | 10 lines
Merged revisions 110869 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r110869 | kpfleming | 2008-03-26 08:53:46 -0700 (Wed, 26 Mar 2008) | 2 lines
due to licensing restrictions, we cannot distribute the source code for iLBC encoding and decoding... so remove it, and add instructions on how the user can obtain it themselves
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@110881 65c4cc65-6c06-0410-ace0-fbb531ad65f3
(closes issue #11553)
Reported by: johan
Patches:
UPGRADE.txt.channelredirect.patch uploaded by johan (license 334)
CHANGES.channelredirect.patch uploaded by johan (license 334)
app_channelredirect-20080219.patch uploaded by johan (license 334)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@103819 65c4cc65-6c06-0410-ace0-fbb531ad65f3