https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r157859 | kpfleming | 2008-11-19 15:34:47 -0600 (Wed, 19 Nov 2008) | 7 lines
the gcc optimizer frequently finds broken code (use of uninitalized variables, unreachable code, etc.), which is good. however, developers usually compile with the optimizer turned off, because if they need to debug the resulting code, optimized code makes that process very difficult. this means that we get code changes committed that weren't adequately checked over for these sorts of problems.
with this build system change, if (and only if) --enable-dev-mode was used and DONT_OPTIMIZE is turned on, when a source file is compiled it will actually be preprocessed (into a .i or .ii file), then compiled once with optimization (with the result sent to /dev/null) and again without optimization (but only if the first compile succeeded, of course).
while making these changes, i did some cleanup work in Makefile.rules to move commonly-used combinations of flag variables into their own variables, to make the file easier to read and maintain
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@157974 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Add CLI aliases module to asterisk.
- Remove all deprecated CLI commands from the code
Initial work done by file.
Junk-Y and lmadsen did a lot of work and testing to
get the list of deprecated commands into the configuration file.
Deprecated CLI commands are now handled by this new module,
see cli_aliases.conf for more info about that.
ok russellb@ via reviewboard
(closes issue #13735)
Reported by: mvanbaak
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@156120 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r144924 | kpfleming | 2008-09-27 10:00:48 -0500 (Sat, 27 Sep 2008) | 6 lines
improve header inclusion process in a few small ways:
- it is no longer necessary to forcibly include asterisk/autoconfig.h; every module already includes asterisk.h as its first header (even before system headers), which serves the same purpose
- astmm.h is now included by asterisk.h when needed, instead of being forced by the Makefile; this means external modules will build properly against installed headers with MALLOC_DEBUG enabled
- simplify the usage of some of these headers in the AEL-related stuff in the utils directory
........
r144925 | kpfleming | 2008-09-27 10:13:30 -0500 (Sat, 27 Sep 2008) | 2 lines
fix some minor issues with rev 144924
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@144949 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: mnicholson
Patches:
pbx_lua9.diff uploaded by mnicholson (license 96)
Many thanks to Matt for his upgrade to the lua dialplan
option!
the Description from the bug:
This patch adds a stack trace to errors encountered while executing lua extensions. The patch also handles out of memory errors reported by lua.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@144681 65c4cc65-6c06-0410-ace0-fbb531ad65f3
It was pretty sparsely documented.
This update fleshes out the pbx_lua module, to
add the switch statements to the extensions in the
extensions.lua file, as well as removing them when
the module is unloaded.
Many thanks to Matt Nicholson for his fine
contribution!
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@144523 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: mnicholson
Considering that the example extensions.lua used nothing but ["12345"] notation,
and that the resulting error message:
[Sep 24 17:01:16] ERROR[12393]: pbx_lua.c:1204 exec: Error executing lua extension: attempt to call a nil value
is not very informative as to the nature of the problem, I think this bug
fix is a big win!
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@144482 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r141094 | murf | 2008-09-04 17:15:07 -0600 (Thu, 04 Sep 2008) | 70 lines
(closes issue #13357)
Reported by: pj
Tested by: murf
(closes issue #13416)
Reported by: yarns
Tested by: murf
If you find this message overly verbose, relax, it's probably
not meant for you. This message is meant for probably only
two people in the whole world: me, or the poor schnook that
has to maintain this code because I'm either dead or unavailable
at the moment.
This fix solves two reports, both having to do with embedding
a function call in a ${} construct. It was tricky because the
funccall syntax has parenthesis () in it. And up till now,
the 'word' token in the flex stuff didn't allow that, because
it would tend to steal the LP and RP tokens. To be truthful,
the "word" token was the trickiest, most unstable thing in
the whole lexer. I was lucky it made this long without complaints.
I had to choose every character in the pattern with extreme
care, and I knew that someday I'd have to revisit it. Well,
the day has come.
So, my brilliant idea (and I'm being modest), was to use the
surrounding ${} construct to make a state machine and capture
everything in it, no matter what it contains. But, I have to now
treat the word token like I did with comments, in that I turn
the whole thing into a state-machine sort of spec, with new
contexts "curlystate", "wordstate", and "brackstate".
Wait a minute, "brackstate"? Yes, well, it didn't take very many
regression tests to point out if I do this for ${} constructs,
I also have to do it with the $[] constructs, too.
I had to create a separate pcbstack2 and pcbstack3 because
these constructs can occur inside macro argument lists, and
when we have two state machines operating on the same structures
we'd get problems otherwise. I guess I could have stopped at
pcbstack2 and had the brackstate stuff share it, but it doesn't
hurt to be safe. So, the pcbpush and pcbpop routines also now
have versions for "2" and "3".
I had to add the {KEYWORD} construct to the initial pattern for
"word", because previously word would match stuff like "default7",
because it was a longer match than the keyword "default". But,
not any more, because the word pattern only matches only one or
two characters now, and it will always lose. So, I made it the
winner again by making an optional match on any of the keywords
before it's normal pattern.
I added another regression test to make sure we don't
lose this in future edits, and had to fix just one regression,
where it no longer reports a 'cascaded' error, which I guess
is a plus.
I've given some thought as to whether to apply these fixes to
1.4 and the 1.6.x releases, vs trunk; I decided to put it in
1.4 because one of the bug reports was against 1.4; and it
is unexpected that AEL cannot handle this situation. It actually
reduced the amount of useless "cascade" error messages that
appeared in the regressions (by one line, ehhem). There is
a possible side-effect in that it does now do more careful
checking of what's in those ${} constructs, as far as matching
parens, and brackets are concerned. Some users may find a an
insidious problem and correct it this way. This should be
exceedingly rare, I hope.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@141115 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r136726 | murf | 2008-08-07 18:15:34 -0600 (Thu, 07 Aug 2008) | 32 lines
(closes issue #13236)
Reported by: korihor
Wow, this one was a challenge!
I regrouped and ran a new strategy for
setting the ~~MACRO~~ value; I set it once
per extension, up near the top. It is only
set if there is a switch in the extension.
So, I had to put in a chunk of code to detect
a switch in the pval tree.
I moved the code to insert the set of ~~exten~~
up to the beginning of the gen_prios routine,
instead of down in the switch code.
I learned that I have to push the detection
of the switches down into the code, so everywhere
I create a new exten in gen_prios, I make sure
to pass onto it the values of the mother_exten
first, and the exten next.
I had to add a couple fields to the exten
struct to accomplish this, in the ael_structs.h
file. The checked field makes it so we don't
repeat the switch search if it's been done.
I also updated the regressions.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@136746 65c4cc65-6c06-0410-ace0-fbb531ad65f3
AMI commands can display that a channel is under control of an AGI.
Work inspired by work at customer site, but paid for by Edvina AB
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@128240 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r127973 | tilghman | 2008-07-03 22:30:30 -0500 (Thu, 03 Jul 2008) | 8 lines
Fix the 'dialplan remove extension' logic, so that it a) works with cidmatch,
and b) completes contexts correctly when the extension is ambiguous.
(closes issue #12980)
Reported by: licedey
Patches:
20080703__bug12980.diff.txt uploaded by Corydon76 (license 14)
Tested by: Corydon76
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@128027 65c4cc65-6c06-0410-ace0-fbb531ad65f3
remove weird pre-setting of LUA paths; they are not necessary; also use the proper path for including the files in pbx_lua.c
add searching for OpenAIS libraries in /usr/lib/openais if a path is not specified; not sure if this is really the optimal solution, but it works
make the compiler shut up about some ignored function results in pbx_gtkconsole; this module is badly coded anyway
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@126356 65c4cc65-6c06-0410-ace0-fbb531ad65f3
They want (char *)NULL as sentinel.
An example is OpenBSD (confirmed on 4.3) that ships with gcc 3.3.4
This commit introduces a contstant SENTINEL which is declared as:
#define SENTINEL ((char *)NULL)
All places I could test compile on my openbsd system are converted.
Update CODING-GUIDELINES to tell about this constant.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@124127 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r123710 | tilghman | 2008-06-18 15:22:42 -0500 (Wed, 18 Jun 2008) | 7 lines
Set the variables top-down, so that if a script sets a variable more than once,
the last one will take precedence.
(closes issue #12673)
Reported by: phber
Patches:
20080519__bug12673.diff.txt uploaded by Corydon76 (license 14)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@123715 65c4cc65-6c06-0410-ace0-fbb531ad65f3
DUNDi uses a concept called the Entity ID for unique server identifiers. I have
pulled out the handling of EIDs and made it something available to all of Asterisk.
There is now a global Entity ID that can be used for other purposes as well, such
as code providing distributed device state, which is why I did this. The global
Entity ID is set automatically, just like it was done in DUNDi, but it can also be
set in asterisk.conf. DUNDi will now use this global EID unless one is specified
in dundi.conf.
The current EID for the system can be seen in the "core show settings" CLI command.
It is also available in the dialplan via the ENTITYID variable.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@121439 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r120226 | tilghman | 2008-06-03 17:41:04 -0500 (Tue, 03 Jun 2008) | 8 lines
Due to incorrect use of the AST_LIST_INSERT_HEAD() macro the loopback switch
cannot perform any translation on the extension number before searching for it
in the target context.
(closes issue #12473)
Reported by: chappell
Patches:
pbx_loopback.c.diff uploaded by chappell (license 8)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@120227 65c4cc65-6c06-0410-ace0-fbb531ad65f3
and off for new installations. This includes the translation from pipes to commas
for pbx_realtime and the EXEC command for AGI, as well as the change to the Set
application not to support multiple variables at once.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@120171 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r119966 | murf | 2008-06-03 09:26:56 -0600 (Tue, 03 Jun 2008) | 8 lines
Updated the regressions on AEL. Hadn't updated
this for the changes I made to preserve ${EXTEN}
in switches, which affected several tests because
it adds extra priorities, and at least one needed to be updated
because of the removal of the empty extension warning
message.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@119998 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: atis
Tested by: murf
This upgrade adds the ~~ (concatenation) string operator to expr2.
While not needed in normal runtime pbx operation, it is needed when
raw exprs are being syntax checked. This plays into future syntax-
unification plans. By permission of atis, this addition in trunk
and the reason of why things are as they are will suffice to close
this bug.
I also added a short note about the previous addition of "sip show sched"
to the CLI in CHANGES, which I discovered I forgot in a previous commit.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114423 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r111341 | murf | 2008-03-26 21:21:05 -0600 (Wed, 26 Mar 2008) | 15 lines
(closes issue #12302)
Reported by: pj
Tested by: murf
These changes will set a channel variable ~~EXTEN~~ just before generating code
for a switch, with the value of ${EXTEN}. The exten is marked as having a switch,
and ever after that, till the end of the exten, we substitute any ${EXTEN}
with ${~~EXTEN~~} instead in application arguments; (and the ${EXTEN: also).
The reason for this, is that because switches are coded using
separate extensions to provide pattern matching, and
jumping to/from these switch extensions messes up the ${EXTEN} value,
which blows the minds of users.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@111360 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r109309 | murf | 2008-03-18 00:37:15 -0600 (Tue, 18 Mar 2008) | 17 lines
(closes issue #11903)
Reported by: atis
Many thanks to atis for spotting this problem and reporting it.
The fix was to straighten out how items are placed on and removed
from the file stack. Regressions as well as the provided test case
helped to straighten out all code paths. valgrind was used to make
sure all memory allocated was freed.
Sorry for not solving this earlier. I got distracted.
Added the ntest23 regression test, which is mainly a copy of ntest22,
but with a few juicy errors thrown in, to replicate the kind of
error that atis spotted.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@109357 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: rizzo
Tested by: murf
Proposal of the changes to be made, and then an announcement of how they were accomplished:
http://lists.digium.com/pipermail/asterisk-dev/2008-February/032065.html
and:
http://lists.digium.com/pipermail/asterisk-dev/2008-March/032124.html
Here is a recap, file by file, of what I have done:
pbx/pbx_config.c
pbx/pbx_ael.c
All funcs that were passed a ptr to the context list, now will ALSO be passed a hashtab ptr to the same set.
Why? because (for the time being), the dialplan is stored in both, to facilitate a quick, low-cost move to
hash-tables to speed up dialplan processing. If it was deemed necessary to pass the context LIST, well, it
is just as necessary to have the TABLE available. This is because the list/table in question might not be
the global one, but temporary ones we would use to stage the dialplan on, and then swap into the global
position when things are ready.
We now have one external function for apps to use, "ast_context_find_or_create()" instead of the pre-existing
"find" and "create", as all existing usages used both in tandem anyway.
pbx_config, and pbx_ael, will stage the reloaded dialplan into local lists and tables, and
then call merge_contexts_and_delete, which will merge (now) existing contexts and
priorities from other registrars into this local set by copying them. Then, merge_contexts_and_delete will
lock down the contexts, swap the lists and tables, and unlock (real quick), and then
destroy the old dialplan.
chan_sip.c
chan_iax.c
chan_skinny.c
All the channel drivers that would add regcontexts now use the ast_context_find_or_create now.
chan_sip also includes a small fix to get rid of warnings about removing priorities that never got entered.
apps/app_meetme.c
apps/app_dial.c
apps/app_queue.c
All the apps that added a context/exten/priority were also modified to use ast_context_find_or_create instead.
include/asterisk/pbx.h
ast_context_create() is removed. Find_or_create_ is the new method.
ast_context_find_or_create() interface gets the hashtab added.
ast_merge_contexts_and_delete() gets the local hashtab arg added.
ast_wrlock_contexts_version() is added so you can detect if someone else got a writelock between your readlocking and writelocking.
ast_hashtab_compare_contexts was made public for use in pbx_config/pbx_ael
ast_hashtab_hash_contexts was in like fashion make public.
include/asterisk/pval.h
ast_compile_ael2() interface changed to include the local hashtab table ptr.
main/features.c
For the sake of the parking context, we use ast_context_find_or_create().
main/pbx.c
I changed all the "tree" names to "table" instead. That's because the original
implementation was based on binary trees. (had a free library). Then I moved
to hashtabs. Now, the names move forward too.
refcount field added to contexts, so you can keep track of how many modules
wanted this context to exist.
Some log messages that are warnings were inflated from LOG_NOTICE to LOG_WARNING.
Added some calls to ast_verb(3,...) for debug messages
Lots of little mods to ast_context_remove_extension2, which is now excersized in ways
it was not previously; one definite bug fixed.
find_or_create was upgraded to handle both local lists/tables as well as the globals.
context_merge() was added to do the per-context merging of the old/present contexts/extens/prios into the new/proposed local list/tables
ast_merge_contexts_and_delete() was heavily modified.
ast_add_extension2() was also upgraded to handle changes.
the context_destroy() code was re-engineered to handle the new way of doing things,
by exten/prio instead of by context.
res/ael/pval.c
res/ael/ael.tab.c
res/ael/ael.tab.h
res/ael/ael.y
res/ael/ael_lex.c
res/ael/ael.flex
utils/ael_main.c
utils/extconf.c
utils/conf2ael.c
utils/Makefile
Had to change the interface to ast_compile_ael2(), to include the hashtab ptr.
This ended up involving several external apps. The main gotcha was I had to
include lock.h and hashtab.h in several places.
As a side note, I tested this stuff pretty thoroughly, I replicated the problems
originally reported by Luigi, and made triply sure that reloads worked, and everything
worked thru "stop gracefully". I found a and fixed a few bugs as I was merging into
trunk, that did not appear in my tests of bug6002.
How's this for verbose commit messages?
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@106757 65c4cc65-6c06-0410-ace0-fbb531ad65f3
(closes issue #8925)
About a year ago, as Leif Madsen and Jim van Meggelen were going over the CLI
commands in Asterisk 1.4 for the next version of their book, they documented
a lot of inconsistencies. This set of changes addresses all of these issues
and has been reviewed by Leif.
While this does introduce even more changes to the CLI command structure, it
makes everything consistent, which is the most important thing.
Thanks to all that helped with this one!
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@103171 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Kevin P. Fleming
Terry Wilson
Michiel van Baak
BJ Weschke
Tilghman Lesher
Steve Murphy
Sean Bright
Russell Bryant
Brett Bryant
Olle Johansson
Jeff Peeler
Joshua Colp