* Added a CLI "ss7 show channels" command that might prove useful for
future debugging.
* Made the incoming SS7 channel event check and gripe message uniform.
* Made sure that the DNID string for an incoming call is always
initialized.
(issue ASTERISK-17966)
Reported by: Kenneth Van Velthoven
Patches:
jira_asterisk_17966_v1.8_glare.patch (license #5621) patch uploaded by rmudgett
........
Merged revisions 340365 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 340366 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@340367 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fixed deadlock potential calling dialog_unlink_all() in
__sip_autodestruct(). Found by helgrind.
* Fixed deadlock potential in handle_request_invite() after calling
sip_new(). Found by helgrind.
* The sip_new() function now returns with the created channel already
locked.
* Removed the dead code that starts a PBX in in sip_new(). No sip_new()
callers caused that code to be executed and it was a bad thing to do
anyway.
* Removed unused parameters and return value from dialog_unlink_all().
* Made dialog_unlink_all() and __sip_autodestruct() safely obtain the
owner and private channel locks without a deadlock avoidance loop.
........
Merged revisions 340284 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 340310 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@340318 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fixed race between calling an AMI action callback and unregistering that
action. Refixes ASTERISK-13784 broken by ASTERISK-17785 change.
* Fixed potential memory leak if an AMI action failed to get registered
because is already was registered. Part of the ao2 conversion.
* Fixed AMI ListCommands action not walking the actions list with a lock
held.
* Fix usage of ast_strdupa() and alloca() in loops. Excess stack usage.
* Fix AMI Originate action Variable header requiring a space after the
header colon. Reported by Yaroslav Panych on the asterisk-dev list.
* Increased the number of listed variables allowed per AMI Originate
action Variable header to 64.
* Fixed AMI GetConfigJSON action output format.
* Fixed usage of res contents outside of scope in append_channel_vars().
* Fixed inconsistency of config file channelvars option. The values no
longer accumulate with every channelvars option in the config file. Only
the last value is kept to be consistent with the CLI "manager show
settings" command.
(closes issue ASTERISK-18479)
Reported by: Jaco Kroon
........
Merged revisions 340279 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 340281 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@340282 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
........
r340222 | twilson | 2011-10-10 15:55:39 -0700 (Mon, 10 Oct 2011) | 8 lines
On astdb conversion, also warn about permissions requirements
The user running Asterisk must have permission to the directory
the Asterisk database resides in since SQLite 3 needs to be able
to create a journal file.
(closes issue ASTERISK-18174)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@340223 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
........
r340219 | twilson | 2011-10-10 15:38:06 -0700 (Mon, 10 Oct 2011) | 8 lines
Add astdb conversion utility for Berkeley to SQLite 3
If someone wants to backtrack from Asterisk 1.8 to 10 they can use the
astdb2bdb utility to convert the database back to the Berkeley format
that Asterisk 1.8 uses.
Review: https://reviewboard.asterisk.org/r/1502/
........
r340220 | twilson | 2011-10-10 15:39:41 -0700 (Mon, 10 Oct 2011) | 2 lines
Add a missing file for the astdb2bdb conversion utility
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@340221 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r340165 | mjordan | 2011-10-10 15:30:18 -0500 (Mon, 10 Oct 2011) | 20 lines
Merged revisions 340164 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r340164 | mjordan | 2011-10-10 15:23:48 -0500 (Mon, 10 Oct 2011) | 13 lines
Updated chan_sip to place calls on hold if SDP address in INVITE is ANY
This patch fixes the case where an INVITE is received with c=0.0.0.0 or ::.
In this case, the call should be placed on hold. Previously, we checked for
the address being null; this patch keeps that behavior but also checks for
the ANY IP addresses.
Review: https://reviewboard.asterisk.org/r/1504/
(closes issue ASTERISK-18086)
Reported by: James Bottomley
Tested by: Matt Jordan
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@340166 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r340109 | mnicholson | 2011-10-10 09:15:41 -0500 (Mon, 10 Oct 2011) | 18 lines
Merged revisions 340108 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r340108 | mnicholson | 2011-10-10 09:14:48 -0500 (Mon, 10 Oct 2011) | 11 lines
Load the proper XML documentation when multiple modules document the same application.
This patch adds an optional "module" attribute to the XML documentation spec
that allows the documentation processor to match apps with identical names from
different modules to their documentation. This patch also fixes a number of
bugs with the documentation processor and should make it a little more
efficient. Support for multiple languages has also been properly implemented.
ASTERISK-18130
Review: https://reviewboard.asterisk.org/r/1485/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@340110 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added some data to skinny packet structures to make compatible
with v17. Added protocolversion to device, set on registration
based on the version provided by device.
v17 includes some increased ip space for ip6. This patch increases
ip space in the packets but still only uses ip4. Some packet
structures duplicated (ip4 and ip6 types). ip4 type used unless
version is greater or equal to 17.
Tested by snuff and myself on 7961 with recent 8.5 firmware. Also
tested compatible with old 7960 and older 30VIPs.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@340071 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Increase SKINNY_MAX_PACKET to 2000 bytes to handle some messages
in v17 that are greater than the old 1000 bytes. Also add some
useful logging regarding packet and session handling.
A device (with protocol v17) was sending a packet with length
greater than 1000 which resulted in the TCP session being
destroyed and registration being retryed.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@340070 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
........
r340031 | wedhorn | 2011-10-10 09:18:27 +1100 (Mon, 10 Oct 2011) | 8 lines
Return -1 to skinny_session if register rejected.
If device registration is rejected, return -1 so that the session is
destroyed immediately. Previously, a segfault would occur on a
graceful shutdown if a register is rejected and the skinny_session
has not yet timed out.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@340032 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
........
r339992 | wedhorn | 2011-10-10 08:09:12 +1100 (Mon, 10 Oct 2011) | 9 lines
Remove log message on traverse session list.
On destroying a session, a list of sessions is traversed to find the
matching session. For each session not matching, skinny erroneously
logged that the session was not matched. While technically correct
the message was misleading, and tended to indicate errors that
were not there.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@339993 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
........
r339681 | wedhorn | 2011-10-06 15:47:08 -0500 (Thu, 06 Oct 2011) | 10 lines
Fixed segfault on core stop gracefully.
There was an issue that the cap and confcap pointers for each line and device
were being memcpy'd so they all pointed to the same ast_format_cap. On
destroying, a segfault occured on the second call to the same struct.
skinny reload now works again as well.
Tested by snuff (in trunk) and myself.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@339723 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r339720 | rmudgett | 2011-10-06 17:58:40 -0500 (Thu, 06 Oct 2011) | 27 lines
Merged revisions 339719 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r339719 | rmudgett | 2011-10-06 17:47:50 -0500 (Thu, 06 Oct 2011) | 20 lines
Fix regression in configure script for libpri capability checks.
JIRA AST-598 added the PRI_L2_PERSISTENCE option to fix BRI PTMP TE layer
2 persistence issues with some telcos. ASTERISK-18535 attempted to fix
the unexpected requirement that libpri *must* have that feature to work
with Asterisk. The AST_EXT_LIB_SETUP_DEPENDENT lines made the PRI
optional features required. Unfortunately, I thought
AST_EXT_LIB_SETUP_DEPENDENT didn't do anything useful for libpri and
deleted those lines for libpri. The result was the HAVE_PRI_xxx defines
that control the ability to use optional libpri features were also
deleted.
* Created AST_EXT_LIB_SETUP_OPTIONAL configuration macro to allow optional
features in a library that the source code could take advantage of if the
code supports the feature.
(closes issue ASTERISK-18687)
Reported by: Norbert
Tested by: rmudgett
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@339721 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There was an issue that the cap and confcap pointers for each line and device
were being memcpy'd so they all pointed to the same ast_format_cap. On
destroying, a segfault occured on the second call to the same struct.
skinny reload now works again as well.
Tested by snuff and myself.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@339680 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r339626 | rmudgett | 2011-10-06 12:53:00 -0500 (Thu, 06 Oct 2011) | 25 lines
Merged revisions 339625 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r339625 | rmudgett | 2011-10-06 12:49:38 -0500 (Thu, 06 Oct 2011) | 18 lines
Fix debugging messages generated by 'udptl debug'.
* Makes chan_sip set the tag to the channel name.
* Fixes received debug message sequence number.
* Removed tx/rx debug message type since it was hard coded to 0.
* Made udptl.c logged message header consistent if possible: "UDPTL (%s): ".
* Removed unused rx_expected_seq_no from struct ast_udptl.
(closes issue ASTERISK-18401)
Reported by: Kevin P. Fleming
Patches:
jira_asterisk_18401_v1.8.patch (license #5621) patch uploaded by rmudgett
Tested by: Matthew Nicholson
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@339627 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r339586 | lmadsen | 2011-10-06 08:43:21 -0500 (Thu, 06 Oct 2011) | 16 lines
Merged revisions 339566 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r339566 | lmadsen | 2011-10-05 16:30:11 -0500 (Wed, 05 Oct 2011) | 8 lines
Update prep_tarball script to download pre-exported documentation.
I've updated the prep_tarball script to now download the pre-exported documentation
from the Asterisk wiki. This will give us more control over what is being included
in the tarball releases, and will make both the PDF and HTML exported documentation
look much better (especially when viewing from a console).
(Closes issue ASTERISK-18677)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@339587 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added func FAXOPT(faxdetect)=yes,cng,t38[,timeout]/no
to enable dialplan faxdetect allowing more flexibility.
as soon as a fax tone is detected the framehook is removed.
there is a penalty involved in running this framehook on
non G711 channels as they will be transcoded.
CNG tone is suppresed using the SQUELCH flag to allow
WaitForNoise to be run on the channel to detect Voice.
(Closes issue ASTERISK-18569)
Reported by: Myself
Reviewed by: Matthew Nicholson, Kevin Fleming
Review: https://reviewboard.asterisk.org/r/1116/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@339465 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
........
r339463 | irroot | 2011-10-05 08:28:46 +0200 (Wed, 05 Oct 2011) | 9 lines
Only change the capabilities on the gateway when
the session is been destroyed there is still
a race condition that ends in a segfault.
if the caps are changed the logic in res_fax_spandsp
will run T30 code not gateway code to end the session.
this has been experienced on a "slower" under spec system.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@339464 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r339353 | jrose | 2011-10-04 14:44:02 -0500 (Tue, 04 Oct 2011) | 18 lines
Merged revisions 339352 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r339352 | jrose | 2011-10-04 14:33:12 -0500 (Tue, 04 Oct 2011) | 12 lines
Removes improper use of sound 'and' in German language mode from application saynumber
Asterisk would say 'Five hundert und sechs und zwanzig' instead of 'Five hundert sechs
und zwanzig'... which is both weird sounding and wrong. This patch makes sure Asterisk
will only say the 'and' word between the single digit and double digit places.
(closes issue ASTERISK-18212)
Reported By: Lionel Elie Mamane
Patches:
upstream_germand_no_and.diff (License #5402) uploaded by Lionel Elie Mamane
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@339354 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r339298 | jrose | 2011-10-04 09:09:50 -0500 (Tue, 04 Oct 2011) | 19 lines
Merged revisions 339297 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r339297 | jrose | 2011-10-04 09:01:05 -0500 (Tue, 04 Oct 2011) | 13 lines
Reverting revision 333265 due to component connection problems it introduces.
I'm going to attempt some generic res_jabber cleanup and come up with a new fix for this
problem, but first it seems prudent to remove this rather broad attempt to fix it and
instead approach this problem either from the same angle but looking only at canceling
(or possibly rescheduling) the send when we absolutely know it will cause a segfault
or, if that can't be easily accomplished, strictly from the devstate side of things.
Also, I'm pretty sure a lot of the code in res_jabber isn't thread safe.
(issue ASTERISK-18626)
(issue ASTERISK-18078)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@339315 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r339088 | twilson | 2011-10-03 11:44:27 -0700 (Mon, 03 Oct 2011) | 17 lines
Merged revisions 339086 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r339086 | twilson | 2011-10-03 11:40:52 -0700 (Mon, 03 Oct 2011) | 10 lines
Properly ignore AST_CONTROL_UPDATE_RTP_PEER in more places
After the change in r336294, the new AST_CONTROL_UPDATE_RTP_PEER frame
is sent when a re-invite happens. If we receive a re-invite from a device
the waitstream_core was not aware of the new control frame and would drop
the call.
(closes issue ASTERISK-18610)
Reported by: Kristijan_Vrban
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@339090 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
........
r338950 | irroot | 2011-10-03 11:37:59 +0200 (Mon, 03 Oct 2011) | 14 lines
Fixup a race condition in res_fax.c where FAXOPT(gateway)=no will
turn off the gateway but the framehook is not destroyed.
this problem happens when a gateway is attempted in the dialplan and
the device is not available i may want to do fax to mail in the server
it will not be allowed.
instead of checking only AST_FAX_TECH_GATEWAY also check gateway_id
Reverts 338904
Fix some white space.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@338951 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
........
r338904 | irroot | 2011-10-02 16:17:32 +0200 (Sun, 02 Oct 2011) | 8 lines
Remove T38 Gateway capability when detaching framehook.
SET(FAXOPT(gateway)=no) does not remove the capability when
detaching the framehook.
small patch to fix this problem.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@338905 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r338801 | rmudgett | 2011-09-30 17:06:48 -0500 (Fri, 30 Sep 2011) | 19 lines
Merged revisions 338800 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r338800 | rmudgett | 2011-09-30 17:05:10 -0500 (Fri, 30 Sep 2011) | 12 lines
Fix segfault in analog_ss_thread() not checking ast_read() for NULL.
NOTE: The problem was reported against v1.6.2. It is unlikely to ever
happen on v1.8 and above since chan_dahdi.c:analog_ss_thread() is unlikely
to be used. The version in sig_analog.c has largely replaced it.
(closes issue ASTERISK-18648)
Reported by: Stephan Bosch
Patches:
jira_asterisk_18648_v1.8.patch (license #5621) patch uploaded by rmudgett
Tested by: Stephan Bosch
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@338802 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Richard Mudgett
Paul Belanger
Tzafrir Cohen
Terry Wilson
Matthew Jordan
Matthew Nicholson
Damien Wedhorn
Igor Goncharovskiy
Leif Madsen
Gregory Nietsky
Jonathan Rose
Alexandr Anikin
Olle Johansson
TransNexus OSP Development