https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r326411 | tilghman | 2011-07-05 17:08:29 -0500 (Tue, 05 Jul 2011) | 14 lines
Add the attribute "type" to each "<use>" for menuselect.
This matters only when autoconf fails to detect that weak linking is supported.
External optional dependencies will become optional in both cases, as they are
removed at compile time when not detected. However, runtime-optional modules
are made mandatory when weak linking is not found. This change affects only
the external optional dependencies; previously, they were incorrectly required
when weak linking support was not detected.
Patches:
20110702__issue18062__asterisk_trunk.diff.txt by tilghman (License #5003)
Tested by: iasgoscouk
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@326412 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r325610 | rmudgett | 2011-06-29 13:05:15 -0500 (Wed, 29 Jun 2011) | 18 lines
Response to QueueRule manager command does not contain ActionID if it was specified.
* Add ActionID support as documented for the QueueRule AMI action.
* Remove documentation for ActionID with the Queues AMI action. The
output does not follow normal AMI response output and there is no place to
put an ActionID header.
(closes issue AST-602)
Reported by: Vlad Povorozniuc
Patches:
jira_ast_602_v1.8.patch (license #5621) patch uploaded by rmudgett
Tested by: Vlad Povorozniuc, rmudgett
Review: https://reviewboard.asterisk.org/r/1295/
JIRA SWP-3575
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@325611 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Added general option negative_penalty_invalid default off. when set
members are seen as invalid/logged out when there penalty is negative.
for realtime members when set remove from queue will set penalty to -1.
* Added queue option autopausedelay when autopause is enabled it will be
delayed for this number of seconds since last successful call if there
was no prior call the agent will be autopaused immediately.
* Added member option ignorebusy this when set and ringinuse is not
will allow per member control of multiple calls as ringinuse does for
the Queue.
- Mark QUEUE_MEMBER_PENALTY Deprecated it never worked for realtime members
- QUEUE_MEMBER is now R/W supporting setting paused, ignorebusy and penalty.
(closes issue ASTERISK-17421)
(closes issue ASTERISK-17391)
Reported by: irroot
Tested by: irroot, jrose
Review: https://reviewboard.asterisk.org/r/1119/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@325483 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r322484 | rmudgett | 2011-06-08 15:46:55 -0500 (Wed, 08 Jun 2011) | 15 lines
Ring all queue with more than 255 agents will cause crash.
1. Create a ring-all queue with 500 permanent agents.
2. Call it.
3. Asterisk will crash.
The watchers array in app_queue.c has a hard limit of 255. Bounds
checking is not done on this array. No sane person should put 255 people
in a ring-all queue, but we should not crash anyway.
* Added bounds checking to the watchers array.
JIRA AST-464
JIRA SWP-2903
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@322485 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r320823 | rmudgett | 2011-05-25 12:06:38 -0500 (Wed, 25 May 2011) | 18 lines
The AMI Newstate event contains different information between v1.4 and v1.8.
The addition of connected line support in v1.8 changes the behavior of the
channel caller ID somewhat. The channel caller ID value no longer time
shares with the connected line ID on outgoing call legs. The timing of
some AMI events/responses output the connected line ID as caller ID.
These party ID's are now separate.
* The ConnectedLineNum and ConnectedLineName headers were added to many
AMI events/responses if the CallerIDNum/CallerIDName headers were also
present.
(closes issue #18252)
Reported by: gje
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/1227/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@320825 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r317584 | twilson | 2011-05-06 01:18:53 -0700 (Fri, 06 May 2011) | 20 lines
Merged revisions 317575 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r317575 | twilson | 2011-05-06 01:04:17 -0700 (Fri, 06 May 2011) | 13 lines
Merged revisions 317574 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r317574 | twilson | 2011-05-06 00:55:21 -0700 (Fri, 06 May 2011) | 6 lines
Re-fix queue round-robin
This part of the change for r315596 was incorrect. No bridge occurs
when doing a roundrobin dial and no one answers, so this code shouldn't
have been removed.
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@317596 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r315644 | twilson | 2011-04-26 14:39:01 -0700 (Tue, 26 Apr 2011) | 32 lines
Merged revisions 315643 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r315643 | twilson | 2011-04-26 14:27:44 -0700 (Tue, 26 Apr 2011) | 25 lines
Merged revisions 315596 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r315596 | twilson | 2011-04-26 14:16:10 -0700 (Tue, 26 Apr 2011) | 18 lines
Allow transfer loops without allowing forwarding loops
We try to avoid the situation where two phones may be forwarded to each other
causing an infinite loop by storing each dialed interface in a channel
datastore and checking the list before dialing out. This works, but currently
breaks situations like A calls B, A transfers B to C, B transfers C to A, and A
transfers C to B. Since human interaction is happening here and not an
automated forwarding loop, it should be allowed.
This patch removes the dialed_interfaces datastore when a call is bridged (a
suggestion from the brilliant mmichelson). If a call is being bridged, it
should be safe to assume that we aren't stuck in a loop.
Since we are now handling this is the bridge code, the previous attempts at
handling it in app_dial and app_queue are removed.
Review: https://reviewboard.asterisk.org/r/1195/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@315670 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r308010 | qwell | 2011-02-15 17:34:03 -0600 (Tue, 15 Feb 2011) | 24 lines
Merged revisions 308007 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r308007 | qwell | 2011-02-15 17:33:24 -0600 (Tue, 15 Feb 2011) | 17 lines
Merged revisions 308002 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r308002 | qwell | 2011-02-15 17:32:20 -0600 (Tue, 15 Feb 2011) | 10 lines
Fix regression that changed behavior of queues when ringing a queue member.
This reverts r298596, which was to fix a highly bizarre and contrived issue
with a queue member that called into his own queue being transferred back
into his own queue. I couldn't reproduce that issue in any way. I think one
of the other recent transfer fixes actually fixed this.
(closes issue #18747)
Reported by: vrban
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@308013 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r307750 | tilghman | 2011-02-14 00:50:23 -0600 (Mon, 14 Feb 2011) | 23 lines
Calling a gosub routine defined in AEL from Dial/Queue ceased to work.
A bug in AEL did not distinguish between the "s" extension generated by
AEL and an "s" extension that was required to exist by the chan_dahdi
(or another channel) that was not supplied with a starting extension.
Therefore, AEL made incorrect assumptions about what commands were
permissable in the context. This was fixed by making AEL generate a
different extension name. However, Dial and Queue make additional
assumptions about the name of the default gosub extension. Therefore,
they needed to be brought into line with a "macro" rendered by AEL (as
a gosub), without breaking traditional dialplans written without the
aid of AEL.
Related to (issue #18480)
Reported by: nivek
(closes issue #18729)
Reported by: kkm
Patches:
20110209__issue18729.diff.txt uploaded by tilghman (license 14)
018729-dial-queue-gosub-try3.patch uploaded by kkm (license 888)
Tested by: kkm
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@307751 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r306324 | rmudgett | 2011-02-04 12:53:06 -0600 (Fri, 04 Feb 2011) | 9 lines
Don't send redirecting updates to the caller if the dialplan forked the call.
Each fork in the dial could be redirected and confuse the caller. For
ISDN the DivLeg1 and DivLeg3 messages would get confused because ISDN
redirects calls in sequence not in parallel.
* Also fixed a formatting inconsistency in app_dial.c and make a warning
message more useful about what frame type could not be written.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306325 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Add and extend the see-also sections to the documentation for applications
and functions in an effort to expand the online documentation of the wiki.
Also check for and update any links to moved documentation in the doc folder.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@304913 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r303009 | jpeeler | 2011-01-20 11:10:32 -0600 (Thu, 20 Jan 2011) | 21 lines
Merged revisions 303008 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r303008 | jpeeler | 2011-01-20 11:07:44 -0600 (Thu, 20 Jan 2011) | 14 lines
Merged revisions 303007 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r303007 | jpeeler | 2011-01-20 11:04:08 -0600 (Thu, 20 Jan 2011) | 8 lines
Add new queue strategy to preserve behavior for when queue members moved to ao2.
Add queue strategy called "rrordered" to mimic old behavior from when queue
members were stored in a linked list.
ABE-2707
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@303011 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r298598 | jpeeler | 2010-12-16 14:51:44 -0600 (Thu, 16 Dec 2010) | 21 lines
Merged revisions 298597 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r298597 | jpeeler | 2010-12-16 14:49:33 -0600 (Thu, 16 Dec 2010) | 14 lines
Merged revisions 298596 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r298596 | jpeeler | 2010-12-16 14:46:52 -0600 (Thu, 16 Dec 2010) | 7 lines
Fix improper hangup when doing an attended transfer to queue.
Had to indicate ringing in wait_for_answer so the attended transfer code would
not try and hang up the local channel it created, which would kill the call.
ABE-2624
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@298599 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r288079 | rmudgett | 2010-09-21 15:29:51 -0500 (Tue, 21 Sep 2010) | 2 lines
Protect channel access in CONNECTED_LINE and REDIRECTING interception macro launch code.
........
r288080 | rmudgett | 2010-09-21 15:29:59 -0500 (Tue, 21 Sep 2010) | 8 lines
Simplify locking code for REDIRECTING interception macro when forwarding a call.
Simplified the locking code by using a local copy of the redirecting party
information in app_dial.c:do_forward() and app_queue.c:wait_for_answer()
for launching the REDIRECTING interception macro when a call is forwarded.
Reduced the lock time of the 'o->chan' and 'in' channels.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@288081 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r279227 | rmudgett | 2010-07-23 17:20:47 -0500 (Fri, 23 Jul 2010) | 21 lines
Merged revisions 279207 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r279207 | rmudgett | 2010-07-23 17:11:23 -0500 (Fri, 23 Jul 2010) | 14 lines
Merged revisions 279206 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r279206 | rmudgett | 2010-07-23 16:56:44 -0500 (Fri, 23 Jul 2010) | 7 lines
SIP promiscuous redirect could fail to dial the redirect.
The ast_channel was created with one variable to ast_request() but the
call to ast_call() that initiates the outgoing call was using a different
variable. The two variables are not equivalent if the call_forward string
included a channel technology specifier. e.g., SIP/200
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@279245 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Just say the number of seconds (after minutes) rather than doing some incorrect
calculation with respect to minutes.
(closes issue #17498)
Reported by: corruptor
Patches:
holdesecs_bug.diff uploaded by corruptor (license 253)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@277488 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The purpose of this patch is to eliminate struct ast_callerid since it has
turned into a miscellaneous collection of various party information.
Eliminate struct ast_callerid and replace it with the following struct
organization:
struct ast_party_name {
char *str;
int char_set;
int presentation;
unsigned char valid;
};
struct ast_party_number {
char *str;
int plan;
int presentation;
unsigned char valid;
};
struct ast_party_subaddress {
char *str;
int type;
unsigned char odd_even_indicator;
unsigned char valid;
};
struct ast_party_id {
struct ast_party_name name;
struct ast_party_number number;
struct ast_party_subaddress subaddress;
char *tag;
};
struct ast_party_dialed {
struct {
char *str;
int plan;
} number;
struct ast_party_subaddress subaddress;
int transit_network_select;
};
struct ast_party_caller {
struct ast_party_id id;
char *ani;
int ani2;
};
The new organization adds some new information as well.
* The party name and number now have their own presentation value that can
be manipulated independently. ISDN supplies the presentation value for
the name and number at different times with the possibility that they
could be different.
* The party name and number now have a valid flag. Before this change the
name or number string could be empty if the presentation were restricted.
Most channel drivers assume that the name or number is then simply not
available instead of indicating that the name or number was restricted.
* The party name now has a character set value. SIP and Q.SIG have the
ability to indicate what character set a name string is using so it could
be presented properly.
* The dialed party now has a numbering plan value that could be useful to
have available.
The various channel drivers will need to be updated to support the new
core features as needed. They have simply been converted to supply
current functionality at this time.
The following items of note were either corrected or enhanced:
* The CONNECTEDLINE() and REDIRECTING() dialplan functions were
consolidated into func_callerid.c to share party id handling code.
* CALLERPRES() is now deprecated because the name and number have their
own presentation values.
* Fixed app_alarmreceiver.c write_metadata(). The workstring[] could
contain garbage. It also can only contain the caller id number so using
ast_callerid_parse() on it is silly. There was also a typo in the
CALLERNAME if test.
* Fixed app_rpt.c using ast_callerid_parse() on the channel's caller id
number string. ast_callerid_parse() alters the given buffer which in this
case is the channel's caller id number string. Then using
ast_shrink_phone_number() could alter it even more.
* Fixed caller ID name and number memory leak in chan_usbradio.c.
* Fixed uninitialized char arrays cid_num[] and cid_name[] in
sig_analog.c.
* Protected access to a caller channel with lock in chan_sip.c.
* Clarified intent of code in app_meetme.c sla_ring_station() and
dial_trunk(). Also made save all caller ID data instead of just the name
and number strings.
* Simplified cdr.c set_one_cid(). It hand coded the ast_callerid_merge()
function.
* Corrected some weirdness with app_privacy.c's use of caller
presentation.
Review: https://reviewboard.asterisk.org/r/702/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@276347 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
This version of the patch only adds AgentComplete for attended transfers. It was already present for blind transfers.
........
r272367 | mnicholson | 2010-06-23 17:33:51 -0500 (Wed, 23 Jun 2010) | 8 lines
Send AgentComplete manager events in the event of blind and attended transfers.
(closes issue #16819)
Reported by: elbriga
Patches:
app_queue.diff uploaded by elbriga (license 482)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@272368 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk Generic AOC Representation
- Generic AOC encode/decode routines.
(Generic AOC must be encoded to be passed on the wire in the AST_CONTROL_AOC frame)
- AST_CONTROL_AOC frame type to represent generic encoded AOC data
- Manager events for AOC-S, AOC-D, and AOC-E messages
Asterisk App Support
- app_dial AOC-S pass-through support on call setup
- app_queue AOC-S pass-through support on call setup
AOC Unit Tests
- AOC Unit Tests for encode/decode routines
- AOC Unit Test for manager event representation.
SIP AOC Support
- Pass-through of generic AOC-D and AOC-E messages to snom phones via the
snom AOC specification.
- Creation of chan_sip page3 flags for the addition of the new
'snom_aoc_enabled' sip.conf option.
IAX AOC Support
- Natively supports AOC pass-through through the use of the new
AST_CONTROL_AOC frame type
DAHDI AOC Support
- ETSI PRI full AOC Pass-through support
- 'aoc_enable' chan_dahdi.conf option for independently enabling
pass-through of AOC-S, AOC-D, AOC-E.
- 'aoce_delayhangup' option for retrieving AOC-E on disconnect.
- DAHDI A() dial string option for requesting AOC services.
example usage:
;requests AOC-S, AOC-D, and AOC-E on call setup
exten=>1111,1,Dial(DAHDI/g1/1112/A(s,d,e))
Review: https://reviewboard.asterisk.org/r/552/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@267096 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r265089 | mmichelson | 2010-05-21 15:59:14 -0500 (Fri, 21 May 2010) | 8 lines
Don't hang up on a queue caller if the file we attempt to play does not exist.
This also fixes a documentation mistake in file.h that made my original attempt
to correct this problem not work correctly.
(closes issue #17061)
Reported by: RoadKill
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@265090 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The connected line update macro would not get run if the connected line
number string was empty. The number could be empty if the connected line
update did not update a number but the name. It should be run if there
was an AST_CONTROL_CONNECTED_LINE frame received for pending dials and
queues.
Renamed and added some more comments for some confusing identifiers
directly connected to the related code.
Also fixed a memory leak in app_queue.
Review: https://reviewboard.asterisk.org/r/669/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@264669 65c4cc65-6c06-0410-ace0-fbb531ad65f3
From reviewboard:
Digium has a commercial customer who has made extensive use of the connected party and
redirecting information present in later versions of Asterisk Business Edition and which
is to be in the upcoming 1.8 release. Through their use of the feature, new problems and solutions
have come about. This patch adds several enhancements to maximize usage of the connected party
and redirecting information functionality.
First, Asterisk trunk already had connected line interception macros. These macros allow you to
manipulate connected line information before it was sent out to its target. This patch adds the
same feature except for redirecting information instead.
Second, the ast_callerid and ast_party_id structures have been enhanced to provide a "tag." This
tag can be set with func_callerid, func_connectedline, func_redirecting, and in the case of DAHDI,
mISDN, and SIP channels, can be set in a configuration file. The idea behind the callerid tag is
that it can be set to whatever value the administrator likes. Later, when running connected line
and redirecting macros, the admin can read the tag off the appropriate structure to determine what
action to take. You can think of this sort of like a channel variable, except that instead of having
the variable associated with a channel, the variable is associated with a specific identity within
Asterisk.
Third, app_dial has two new options, s and u. The s option lets a dialplan writer force a specific
caller ID tag to be placed on the outgoing channel. The u option allows the dialplan writer to force
a specific calling presentation value on the outgoing channel.
Fourth, there is a new control frame subclass called AST_CONTROL_READ_ACTION added. This was added
to correct a very specific situation. In the case of SIP semi-attended (blond) transfers, the party
being transferred would not have the opportunity to run a connected line interception macro to
possibly alter the transfer target's connected line information. The issue here was that during a
blond transfer, the SIP transfer code has no bridged channel on which to queue the connected line
update. The way this was corrected was to add this new control frame subclass. Now, we queue an
AST_CONTROL_READ_ACTION frame on the channel on which the connected line interception macro should
be run. When ast_read is called to read the frame, ast_read responds by calling a callback function
associated with the specific read action the control frame describes. In this case, the action taken
is to run the connected line interception macro on the transferee's channel.
Review: https://reviewboard.asterisk.org/r/652/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@263541 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a specific position is specified for the queue, the idea
was that the caller cannot be placed ahead of higher-priority
callers. Unfortunately, the logic was reversed so that the caller
could ONLY be placed ahead of higher priority callers.
Discovered while writing a unit test.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@260344 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This module implements an abstraction for retrieving and exporting
asterisk data.
Developed by:
Brett Bryant <brettbryant@gmail.com>
Eliel C. Sardanons (LU1ALY) <eliels@gmail.com>
For the Google Summer of code 2009 Project.
Documentation can be found in doxygen format and inside the
header include/asterisk/data.h
Review: https://reviewboard.asterisk.org/r/275/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@258517 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Only chan_dahdi set a value in cdrflags. Everyone else just copied it
around the system. Noone cared about any value it may have contained.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@250565 65c4cc65-6c06-0410-ace0-fbb531ad65f3