Rework HAVE_PRI_SERVICE_MESSAGES to not use the active values directly
from the database. Database access is likely expensive. Database access
now only happens on initialization, destruction, and when the B channel is
taken in or out of service.
This change is not related to call waiting but it would cause the search
for a call waiting interface to be very expensive and slow down D channel
message servicing.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@251538 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Following Q.931 5.2.4
When the user has determined that sufficient call information has been received the
user shall stop T302 and send CALL PROCEEDING to the network.
Previously timeouts were possible if the dialplan took a long time to issue any
response back to the network.
Verified that our local TELCO also does the same.
(issue #16789)
Reported by: alecdavis
Patches:
overlap_receiving_trunk.diff.txt uploaded by alecdavis (license 585)
Tested by: alecdavis
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@249320 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Allows CDR variables added in cdr.c:set_one_cid to become visable during the call,
by executing ast_cdr_update() early in __ast_pbx run.
Reverts sig_pri changes in trunk that are specific to isdn technology only.
(closes issue #16638)
Reported by: alecdavis
Patches:
cdr_update.diff3.txt uploaded by alecdavis (license 585)
Tested by: alecdavis
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@241416 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Allows CDR variables added in cdr.c:set_one_cid to become visable during the call.
(issue #16638)
Reported by: alecdavis
Patches:
cdr_update.diff2.txt uploaded by alecdavis (license 585)
Tested by: alecdavis
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@241187 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Allows CDR variables added in cdr.c:set_one_cid to become visable during the call.
(closes issue #16638)
Reported by: alecdavis
Patches:
cdr_update.diff.txt uploaded by alecdavis (license 585)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@241097 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Changed areas in sig_pri to set the digital flag using a callback that will
also set the corresponding flag in chan_dahdi. Modified dahdi_request slightly
so that if a bearer is marked as digital, that information is available when
creating the new channel.
(closes issue #16151)
Reported by: alecdavis
Patch based on bug_16151.diff.txt uploaded by alecdavis (license 585)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@231058 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Dial(DAHDI/g1[/extension[/options]])
Current options:
K(<keypad_digits>)
R Reverse charging indication (Collect calls)
The earlier Dial(DAHDI/g1[/K<keypad_digits>][/extension] format was
variable and did not allow for the easy addition of more options.
The earlier 'C' prefix character for reverse charge indiation would
conflict with the a-d DTMF digits if ISDN uses them.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@228691 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Since ISDN works like SIP and not analog ports in regard to devices, the
device state based on the ISDN channel number could not work. This has
not been an issue until the advent of PTMP NT mode. Previously, ISDN
lines were used as trunks and did not have to keep track of specific
devices.
As an interim solution until device states are properly implemented, the
channel name is being changed to the following format to use the generic
device state support:
DAHDI/i<span>/<number>[:<subaddress>]-<sequence-number>
Dialplan hints would thus be:
exten => xxx,hint,DAHDI/i2/5551212
This will work with the following restrictions:
* The number of devices/phones cannot exceed the number of B channels.
(i.e., BRI has 2)
* Each device/phone can only have one number. No shared MSN's.
* The phones/devices probably should not use subaddressing.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@226882 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Cleanup some flags on DAHDI PRI channel hangup. (sig_pri split)
* Make sure the outgoing flag is cleared if a new channel fails to get
created for outgoing calls.
* Remove some unused flags since sig_pri was split.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@226648 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Added handling of received HOLD/RETRIEVE messages and the optional ability
to transfer a held call on disconnect similar to an analog phone.
* Added CallRerouting/CallDeflection support for Q.SIG, ETSI PTP, ETSI PTMP.
Will reroute/deflect an outgoing call when receive the message.
Can use the DAHDISendCallreroutingFacility to send the message for the
supported switches.
* Added ability to send/receive keypad digits in the SETUP message.
Send keypad digits in SETUP message: Dial(DAHDI/g1[/K<keypad_digits>][/extension])
Access any received keypad digits in SETUP message by: ${CHANNEL(keypad_digits)}
* Added support for BRI PTMP NT mode.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@225692 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The Telecom Specs in NZ suggests that SUB ADDRESS is always on, so doing
"desk to desk" between offices each with an asterisk box over the ISDN
should then be possible, without a whole load of DDI numbers required.
(closes issue #15604)
Reported by: alecdavis
Patches:
asterisk_subaddr_trunk.diff11.txt uploaded by alecdavis (license 585)
Some minor modificatons were made.
Tested by: alecdavis, rmudgett
Review: https://reviewboard.asterisk.org/r/405/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@225357 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r224330 | jpeeler | 2009-10-16 20:32:47 -0500 (Fri, 16 Oct 2009) | 13 lines
Fix stale caller id data from being reported in AMI NewChannel event
The problem here is that chan_dahdi is designed in such a way to set
certain values in the dahdi_pvt only once. One of those such values
is the configured caller id data in chan_dahdi.conf. For PRI, the
configured caller id data could be overwritten during a call. Instead
of saving the data and restoring, it was decided that for all non-analog
channels it was simply best to not set the configured caller id in the
first place and also clear it at the end of the call.
(closes issue #15883)
Reported by: jsmith
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@224331 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r224260 | rmudgett | 2009-10-16 15:25:23 -0500 (Fri, 16 Oct 2009) | 18 lines
Never released PRI channels when using Busy() or Congestion() dialplan apps.
When the Busy() or Congestion() application is used towards ISDN (an ISDN
progress is sent), the responding ISDN Disconnect or Release may contain
the ISDN cause user busy or one of the congestion causes. In chan_dahdi.c
these causes will only set the needbusy or needcongestion flags and not
activate the softhangup procedure. Unfortunately only the latter can
interrupt the endless wait loop of Busy()/Congestion().
Result: PRI channels staying in state busy for the rest of asterisk life
or until the other end times out and forces the call to clear.
(issue #14292)
Reported by: tomaso
Patches:
disc_rel_userbusy.patch uploaded by tomaso (license 564)
(This patch is unrelated to the issue.)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@224261 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Add Connected Line Presentation (COLP) support to chan_dahdi/libpri as an
addition to issue 8824. This is the chan_dahdi/sig_pri portion. COLP
support is now available for any switch for which libpri supports COLP
(currently ETSI PTP, ETSI PTMP, and Q.SIG) with this patch.
(closes issue #14068)
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/340/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@213007 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r210575 | rmudgett | 2009-08-05 14:18:56 -0500 (Wed, 05 Aug 2009) | 14 lines
Dialplan starts execution before the channel setup is complete.
* Issue 15655: For the case where dialing is complete for an incoming
call, dahdi_new() was asked to start the PBX and then the code set more
channel variables. If the dialplan hungup before these channel variables
got set, asterisk would likely crash.
* Fixed potential for overlap incoming call to erroneously set channel
variables as global dialplan variables if the ast_channel structure failed
to get allocated.
* Added missing set of CALLINGSUBADDR in the dialing is complete case.
(closes issue #15655)
Reported by: alecdavis
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@210640 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Moved SUPPORT_USERUSER to sig_pri.c
* Fix PRI_DEADLOCK_AVOIDANCE parameter.
* Whitespace changes.
* Added missing unlock in pri_dchannel():PRI_EVENT_RING case.
* Balanced curly braces.
* ast_debug/ast_log changes from chan_dahdi.
* sig_pri_indicate() should default to return -1 if the indication is not
handled.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@210154 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The wrong logic was being used in chan_dahdi to convert a sig_pri_chan
to the proper libpri channel number. The most significant bit must only
be set only when trunk groups are being used.
(closes issue #15452)
Reported by: alecdavis
Patches:
bug15452.patch uploaded by jpeeler (license 325)
Tested by: alecdavis
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@208267 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This readds the proper setting of the flag and is really a continuation of
r205731. The flag was being set properly in sig_analog, but use of the
newly added set_dialing callback allowed for some simplification in
chan_dahdi.
(closes issue #15486)
Reported by: rmudgett
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@206767 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Also go back and wrap all of the places that use the specific reverse charge
APIs with preprocessor conditionals.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@204919 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is a continuation of revision 885 to LibPRI (Capture and expose the Reverse
Charging Indication IE on ISDN PRI) which added the ability to get/set Reverse
Charging Indication in LibPRI. This patch adds the ability to specify RCI on
the outbound leg of a PRI call from within Asterisk, by prefixing the dialed
number with a capital 'C' like:
...,Dial(DAHDI/g1/C4445556666)
And to read it off an inbound channel:
exten => s,1,Set(RCI=${CHANNEL(reversecharge)})
Thanks again to rmudgett for the thorough review.
(closes issue #13760)
Reported by: mrgabu
Review: https://reviewboard.asterisk.org/r/303/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@204749 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r203908 | rmudgett | 2009-06-26 19:55:12 -0500 (Fri, 26 Jun 2009) | 16 lines
The ISDN CPE side should not exclusively pick B channels normally.
Before this patch, Asterisk unconditionally picked B channels exclusively
on the CPE side and normally allowed alternative B channels on the network
side. Now Asterisk does the opposite.
Reasons for the CPE side to normally not pick B channels exclusively:
* For CPE point-to-multipoint mode (i.e. phone side), the CPE side does
not have enough information to exclusively pick B channels. (There may be
other devices on the line.)
* Q.931 gives preference to the network side picking B channels.
* Some telcos require the CPE side to not pick B channels exclusively.
(closes issue #14383)
Reported by: mbrancaleoni
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@203909 65c4cc65-6c06-0410-ace0-fbb531ad65f3
CEL is the new system for logging channel events. This was inspired after
facing many problems trying to represent what is possible to happen to a call
in Asterisk using CDR records. For more information on CEL, see the built in
HTML or PDF documentation generated from the files in doc/tex/.
Many thanks to Steve Murphy (murf) and Brian Degenhardt (bmd) for their hard
work developing this code. Also, thanks to Matt Nicholson (mnicholson) and
Sean Bright (seanbright) for their assistance in the final push to get this
code ready for Asterisk trunk.
Review: https://reviewboard.asterisk.org/r/239/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@203638 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This merge splits the PRI/BRI signaling logic out of chan_dahdi.c into
sig_pri.c. Functionality in theory should not change (mostly). A few trivial
changes were made in sig_analog with verbose messages and commenting.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@203304 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Richard Mudgett
Alec L Davis
Kevin P. Fleming
Jeff Peeler
Tilghman Lesher
Joshua Colp
Sean Bright
Russell Bryant