Consider the following scenario:
/-- B
A == * == Network
\-- C
Party B calls party A (EuroISDN BRI phone)
Party A puts B on hold using the HOLD/RETRIEVE messages.
Party A calls party C.
Party A puts C on hold to talk with party B again.
Party A transfers B to C by hanging up.
The call does not get the opportunity to get re-transferred into the ISDN
network by the native bridge because native bridging is not being
reexamined after the initial transfer.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@247609 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When using ast_seekstream with the read/write streams of a monitor,
the number of samples we are seeking must be of the same rate as the
stream or the jump calculation will be incorrect. This patch adds logic
to correctly convert the number of samples to jump to the sample rate
the read/write stream is using.
For example, if the call is G722 (16khz) and the read/write stream is
recording a 8khz wav, seeking 320 samples of 16khz audio is not the
same as seeking 320 samples of 8khz audio when performing the ast_seekstream
on the stream.
ABE-2044
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@246899 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r246545 | dvossel | 2010-02-12 17:30:17 -0600 (Fri, 12 Feb 2010) | 16 lines
lock channel during datastore removal
On channel destruction the channel's datastores are removed and
destroyed. Since there are public API calls to find and remove
datastores on a channel, a lock should be held whenever datastores are
removed and destroyed. This resolves a crash caused by a race
condition in app_chanspy.c.
(closes issue #16678)
Reported by: tim_ringenbach
Patches:
datastore_destroy_race.diff uploaded by tim ringenbach (license 540)
Tested by: dvossel
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@246546 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If the limit was set past MAX_INT upon answering, the call was immediately
hung up due to overflow from the return of ast_tvdiff_ms (in ast_check_hangup).
The time calculation functions ast_tvdiff_sec and ast_tvdiff_ms have been
changed to return an int64_t to prevent overflow. Also the reporter suggested
adding a message indicating the reason for the call hanging up. Given that the
new limit is so much higher, the message (which would only really be useful in
the overflow scenario) has been made a debug message only.
(closes issue #16006)
Reported by: viraptor
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@241143 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The problem was the OUTGOING flag was not getting set properly on the channel,
resulting in pickup failing as ast_read thought the call was inbound. Refer to
170393 for a more verbose description as this is the same exact change.
(closes issue #16539)
Reported by: syspert
Patches:
bug16539.patch uploaded by jpeeler (license 325)
Tested by: syspert
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@240179 65c4cc65-6c06-0410-ace0-fbb531ad65f3
asterisk.conf's 'transmit_silence' option existed before
this patch, but was limited to only generating silence
while recording and sending DTMF. Now enabling the
transmit_silence option generates silence during wait
times as well.
To achieve this, ast_safe_sleep has been modified to
generate silence anytime no other generators are present
and transmit_silence is enabled. Wait apps not using
ast_safe_sleep now generate silence when transmit_silence
is enabled as well.
(closes issue #16524)
Reported by: kobaz
(closes issue #16523)
Reported by: kobaz
Tested by: dvossel
Review: https://reviewboard.asterisk.org/r/456/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@239712 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ast_transfer sets res to 0 if there is no technology transfer function,
but then tests for it to be negative before deciding to do an early exit.
As a result, it will will wait for an AST_CONTROL_TRANSFER message that
will never come.
(closes issue #16424)
Reported by: davidw
Patches:
Issue_16424_trunk_234134.patch uploaded by davidw (license 780)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@238492 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r235635 | jpeeler | 2009-12-18 16:29:51 -0600 (Fri, 18 Dec 2009) | 48 lines
Correct CDR dispositions for BUSY/FAILED
This patch is simple in that it reorders the disposition defines so that the fix
for issue 12946 works properly (the default CDR disposition was changed to
AST_CDR_NOANSWER). Also, the AST_CDR_FLAG_ORIGINATED flag was set in ast_call to
ensure all CDR records are written.
The side effects of CDR changes are scary, so I'm documenting the test cases
performed to attempt to catch any regressions. The following tests were all
performed using 1.4 rev 195881 vs head (235571) + patch:
A calls B
C calls B (busy)
Hangup C
Hangup A
(Both SIP and features)
A calls B
A blind transfers to C
Hangup C
(Both SIP and features)
A calls B
A attended transfers to C
Hangup C
A calls B
A attended transfers to C (SIP)
C blind transfers to A (features)
Hangup A
All of the test scenario CDRs matched.
The following tests were performed just with the patch to ensure proper operation
(with unanswered=yes):
exten =>s,1,Answer
exten =>s,n,ResetCDR(w)
exten =>s,n,ResetCDR(w)
exten =>s,1,ResetCDR(w)
exten =>s,n,ResetCDR(w)
(closes issue #16180)
Reported by: aatef
Patches:
bug16180.patch uploaded by jpeeler (license 325)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@235660 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r233092 | russell | 2009-12-04 11:12:47 -0600 (Fri, 04 Dec 2009) | 7 lines
Only do frame payload check for HOLD frames.
This code was added for helping to debug the source of invalid HOLD frames.
However, a side effect of this is that it will incorrectly report errors for
frames that have an integer payload. Make the check for this block specific
to the HOLD frame case.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@233100 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r231911 | jpeeler | 2009-12-01 15:29:31 -0600 (Tue, 01 Dec 2009) | 12 lines
Fix crash with invalid frame data
The crash was happening as a result of a frame containing an invalid data
pointer, but was set with data length of zero. The few times the issue was
reproduced it _seemed_ that the frame was queued properly, that is the data
pointer was set to NULL. I never could reproduce the crash so as a last resort
the crash has been fixed, but a check in __ast_read has been added to give as
much information about the source of problematic frames in the future.
(closes issue #16058)
Reported by: atis
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@231927 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The Telecom Specs in NZ suggests that SUB ADDRESS is always on, so doing
"desk to desk" between offices each with an asterisk box over the ISDN
should then be possible, without a whole load of DDI numbers required.
(closes issue #15604)
Reported by: alecdavis
Patches:
asterisk_subaddr_trunk.diff11.txt uploaded by alecdavis (license 585)
Some minor modificatons were made.
Tested by: alecdavis, rmudgett
Review: https://reviewboard.asterisk.org/r/405/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@225357 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch finishes the implementation of OBJ_MULTIPLE in astobj2 (the
case where multiple results need to be returned; OBJ_NODATA mode
already was supported). In addition, it converts ast_channel_iterators
(only the targeted versions, not the ones that iterate over all
channels) to use this method.
During this work, I removed the 'ao2_flags' arguments to the
ast_channel_iterator constructor functions; there were no uses of that
argument yet, there is only one possible flag to pass, and it made the
iterators less 'opaque'. If at some point in the future someone really
needs an ast_channel_iterator that does not lock the container, we can
provide constructor(s) for that purpose.
Review: https://reviewboard.asterisk.org/r/379/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@225244 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Channels are stored in an ao2_container. When accessing an item within
an ao2_container the proper locking order is to first lock the container,
and then the items within it.
In ast_do_masquerade both the clone and original channel must be locked
for the entire duration of the function. The problem with this is that
it attemptes to unlink and link these channels back into the ao2_container
when one of the channel's name changes. This is invalid locking order as
the process of unlinking and linking will lock the ao2_container while
the channels are locked!!! Now, both the channels in do_masquerade are
unlinked from the ao2_container and then locked for the entire function.
At the end of the function both channels are unlocked and linked back
into the container with their new names as hash values.
This new method of requiring all channels and tech pvts to be unlocked
before ast_do_masquerade() or ast_change_name() required several
changes throughout the code base.
(closes issue #15911)
Reported by: russell
Patches:
masq_deadlock_trunk.diff uploaded by dvossel (license 671)
Tested by: dvossel, atis
(closes issue #15618)
Reported by: lmsteffan
Patches:
deadlock_local_attended_transfers_trunk.diff uploaded by dvossel (license 671)
Tested by: lmsteffan, dvossel
Review: https://reviewboard.asterisk.org/r/387/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@222761 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ast_channel_get_full() tries to use OBJ_POINTER to optimize name-based
channel lookups, but this will not work properly when the channel's full
name was not supplied; for name-prefix searches, there is no value in
doing a hash-based lookup, and in fact doing so could result in many
channels being skipped.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@220494 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r219136 | mnicholson | 2009-09-17 09:58:39 -0500 (Thu, 17 Sep 2009) | 10 lines
Prevent a potential race condition and crash when hanging up a channel by removing the channel from the channel list before begining channel tear down.
This fix may potentially cause problems with CDR backends that access the channel a CDR is associated with via the channel list. This fix makes the channel unavabile at the time when the CDR backend is invoked. This has been documented in include/asterisk/cdr.h.
(closes issue #15316)
Reported by: vmarrone
Tested by: mnicholson
Review: https://reviewboard.asterisk.org/r/362/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@219139 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r214701 | tilghman | 2009-08-28 15:13:32 -0500 (Fri, 28 Aug 2009) | 8 lines
Modify comment to be a bit more accurate.
We have kept this comment around long enough, that it's pretty clear that we're
keeping the code, because changing the code would require a pretty fundamental
architectural shift. We've also taken criticism in some quarters, because it
was believed that it was referring to the code being nasty. No, the code isn't
nasty, just the operation itself is rather odd. Fixed for eternity (probably
not).
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@214702 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r214194 | dvossel | 2009-08-26 11:36:42 -0500 (Wed, 26 Aug 2009) | 19 lines
ast_write() ignores ast_audiohook_write() results
In ast_write(), if a channel has a list of audiohooks, those
lists are written to and the resulting frame is what ast_write()
should continue with. The problem was the returned audiohook frame
was not being handled at all, and the original frame passed
into it did not contain the mixed audio, so essentially audio
was being lost. One result of this was chan_spy's whisper
mode no longer worked. To complicate the issue, frames
passed into ast_write may either be a single frame, or a list
of frames. So, as the list of frames is processed in the
audiohook_write, the returned frames had to be added to a new
list.
(closes issue #15660)
Reported by: corruptor
Tested by: dvossel
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@214195 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Even though the get_channel_by_name() API advertised that you could search by
name or uniqueid (just as the old API did), searching by uniqueid was not
actually implemented. This patch fixes that problem.
The ast_channel_get_full() function now makes a second search attempt by
uniqueid if the parameter was a name. The channel comparison function also
now knows how to compare by unqieueid.
Finally, a bug was fixed in passing where OBJ_POINTER was being passed in some
scenarios where it should not have been.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@211390 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r210913 | tilghman | 2009-08-06 16:45:01 -0500 (Thu, 06 Aug 2009) | 7 lines
Because channel information can be accessed outside of the channel thread, we must lock the channel prior to modifying it.
(closes issue #15397)
Reported by: caspy
Patches:
20090714__issue15397.diff.txt uploaded by tilghman (license 14)
Tested by: caspy
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@210914 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Over the past couple of months, a number of issues with Asterisk
negotiating (and successfully completing) T.38 sessions with various
endpoints have been found. This patch attempts to address many of
them, primarily focused around ensuring that the endpoints'
MaxDatagram size is honored, and in addition by ensuring that T.38
session parameter negotiation is performed correctly according to the
ITU T.38 Recommendation.
The major changes here are:
1) T.38 applications in Asterisk (app_fax) only generate/receive IFP
packets, they do not ever work with UDPTL packets. As a result of
this, they cannot be allowed to generate packets that would overflow
the other endpoints' MaxDatagram size after the UDPTL stack adds any
error correction information. With this patch, the application is told
the maximum *IFP* size it can generate, based on a calculation using
the far end MaxDatagram size and the active error correction mode on
the T.38 session. The same is true for sending *our* MaxDatagram size
to the remote endpoint; it is computed from the value that the
application says it can accept (for a single IFP packet) combined with
the active error correction mode.
2) All treatment of T.38 session parameters as 'capabilities' in
chan_sip has been removed; these parameters are not at all like
audio/video stream capabilities. There are strict rules to follow for
computing an answer to a T.38 offer, and chan_sip now follows those
rules, using the desired parameters from the application (or channel)
that wants to accept the T.38 negotiation.
3) chan_sip now stores and forwards ast_control_t38_parameters
structures for tracking 'our' and 'their' T.38 session parameters;
this greatly simplifies negotiation, especially for pass-through
calls.
4) Since T.38 negotiation without specifying parameters or receiving
the final negotiated parameters is not very worthwhile, the
AST_CONTROL_T38 control frame has been removed. A note has been added
to UPGRADE.txt about this removal, since any out-of-tree applications
that use it will no longer function properly until they are upgraded
to use AST_CONTROL_T38_PARAMETERS.
Review: https://reviewboard.asterisk.org/r/310/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@208464 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r207360 | russell | 2009-07-20 11:26:24 -0500 (Mon, 20 Jul 2009) | 9 lines
Only do the chan->fdno check in ast_read() in a developer build.
I changed this check to only happen in a dev-mode build. I also added a
comment explaining what is going on. I also made it so that detection of
this situation does not affect ast_read() operation.
(closes issue #14723)
Reported by: seadweller
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@207361 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change allows applications that request T.38 negotiation on a channel that
does not support it to get the proper indication that it is not supported, rather
than thinking that negotiation was started when it was not.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@204948 65c4cc65-6c06-0410-ace0-fbb531ad65f3
CEL is the new system for logging channel events. This was inspired after
facing many problems trying to represent what is possible to happen to a call
in Asterisk using CDR records. For more information on CEL, see the built in
HTML or PDF documentation generated from the files in doc/tex/.
Many thanks to Steve Murphy (murf) and Brian Degenhardt (bmd) for their hard
work developing this code. Also, thanks to Matt Nicholson (mnicholson) and
Sean Bright (seanbright) for their assistance in the final push to get this
code ready for Asterisk trunk.
Review: https://reviewboard.asterisk.org/r/239/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@203638 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r201450 | mmichelson | 2009-06-17 14:59:31 -0500 (Wed, 17 Jun 2009) | 9 lines
Change the datastore traversal in ast_do_masquerade to use a safe list traversal.
It is possible for datastore fixup functions to remove the datastore from the list
and free it. In particular, the queue_transfer_fixup in app_queue does this. While
I don't yet know of this causing any crashes, it certainly could.
Found while discussing a separate issue with Brian Degenhardt.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@201458 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r200991 | kpfleming | 2009-06-16 12:05:38 -0500 (Tue, 16 Jun 2009) | 11 lines
Improve support for media paths that can generate multiple frames at once.
There are various media paths in Asterisk (codec translators and UDPTL, primarily)
that can generate more than one frame to be generated when the application calling
them expects only a single frame. This patch addresses a number of those cases,
at least the primary ones to solve the known problems. In addition it removes the
broken TRACE_FRAMES support, fixes a number of bugs in various frame-related API
functions, and cleans up various code paths affected by these changes.
https://reviewboard.asterisk.org/r/175/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@201056 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When allocating the channel use ao2_ref(-1) to release it, instead of calling
ast_free().
Also avoid freeing structures inside that channel (on error) if they will be
released by the channel destructor being called if the reference counter reachs
0.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@200108 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Also I removed an unnecessary free of a cid_name. This will be freed properly
in the channel destructor.
Reported by mnicholson in #asterisk-dev.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@199923 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The function ast_call_forward() forwards a call to an extension specified in an ast_channel's call_forward string. After an ast_channel is called, if the channel's call_forward string is set this function can be used to forward the call to a new channel and terminate the original one. I have included this api call in both channel.c's ast_request_and_dial() and feature.c's feature_request_and_dial(). App_dial and app_queue already contain call forward logic specific for their application and options.
(closes issue #13630)
Reported by: festr
Review: https://reviewboard.asterisk.org/r/271/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@198856 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When connected line updates are received or generated in the middle
of an application call, it is now possible to execute a macro to
manipulate the connected line data. This way, phone numbers may be
manipulated to be more presentable to users, names may be changed
for...whatever reason, or whatever else needs to be done may be.
Review: https://reviewboard.asterisk.org/r/256
AST-165
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@198727 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r198068 | mnicholson | 2009-05-29 13:53:01 -0500 (Fri, 29 May 2009) | 15 lines
Use AST_CDR_NOANSWER instead of AST_CDR_NULL as the default CDR disposition.
This change also involves the addition of an AST_CDR_FLAG_ORIGINATED flag that is used on originated channels to distinguish: them from dialed channels.
(closes issue #12946)
Reported by: meral
Patches:
null-cdr2.diff uploaded by mnicholson (license 96)
Tested by: mnicholson, dbrooks
(closes issue #15122)
Reported by: sum
Tested by: sum
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@198072 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds 'const' tags to a number of Asterisk APIs where they are appropriate (where the API already demanded that the function argument not be modified, but the compiler was not informed of that fact). The list includes:
- CLI command handlers
- CLI command handler arguments
- AGI command handlers
- AGI command handler arguments
- Dialplan application handler arguments
- Speech engine API function arguments
In addition, various file-scope and function-scope constant arrays got 'const' and/or 'static' qualifiers where they were missing.
Review: https://reviewboard.asterisk.org/r/251/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@196072 65c4cc65-6c06-0410-ace0-fbb531ad65f3
As in previous commits, when channels are allocated (with ast_channel_alloc) or datastores are allocated (with ast_datastore_alloc) properly account for the memory being owned by the caller, instead of the allocator function itself.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@192318 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r191488 | jpeeler | 2009-05-01 12:40:46 -0500 (Fri, 01 May 2009) | 9 lines
Fix DTMF not being sent to other side after a partial feature match
This fixes a regression from commit 176701. The issue was that
ast_generic_bridge never exited after the feature digit timeout had elapsed,
which prevented the queued DTMF from being sent to the other side.
This issue was reported to me directly.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@191489 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There is a lot that could be said about this, but the patch is a big
improvement for performance, stability, code maintainability,
and ease of future code development.
The channel list is no longer an unsorted linked list. The main container
for channels is an astobj2 hash table. All of the code related to searching
for channels or iterating active channels has been rewritten. Let n be
the number of active channels. Iterating the channel list has gone from
O(n^2) to O(n). Searching for a channel by name went from O(n) to O(1).
Searching for a channel by extension is still O(n), but uses a new method
for doing so, which is more efficient.
The ast_channel object is now a reference counted object. The benefits
here are plentiful. Some benefits directly related to issues in the
previous code include:
1) When threads other than the channel thread owning a channel wanted
access to a channel, it had to hold the lock on it to ensure that it didn't
go away. This is no longer a requirement. Holding a reference is
sufficient.
2) There are places that now require less dealing with channel locks.
3) There are places where channel locks are held for much shorter periods
of time.
4) There are places where dealing with more than one channel at a time becomes
_MUCH_ easier. ChanSpy is a great example of this. Writing code in the
future that deals with multiple channels will be much easier.
Some additional information regarding channel locking and reference count
handling can be found in channel.h, where a new section has been added that
discusses some of the rules associated with it.
Mark Michelson also assisted with the development of this patch. He did the
conversion of ChanSpy and introduced a new API, ast_autochan, which makes it
much easier to deal with holding on to a channel pointer for an extended period
of time and having it get automatically updated if the channel gets masqueraded.
Mark was also a huge help in the code review process.
Thanks to David Vossel for his assistance with this branch, as well. David
did the conversion of the DAHDIScan application by making it become a wrapper
for ChanSpy internally.
The changes come from the svn/asterisk/team/russell/ast_channel_ao2 branch.
Review: http://reviewboard.digium.com/r/203/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@190423 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r189277 | mmichelson | 2009-04-20 09:04:41 -0500 (Mon, 20 Apr 2009) | 12 lines
Move the check for chan->fdno == -1 to after the zombie/hangup check.
Many users were finding that their hung up channels were staying up and
causing 100% CPU usage.
(issue #14723)
Reported by: seadweller
Patches:
14723_1-4-tip.patch uploaded by mmichelson (license 60)
Tested by: falves11, bamby
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@189278 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This was accomplished using a set of options and the setoption channel callback.
The core calls into the channel driver using these options and the channel driver
either returns success or failure.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@187360 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The biggest change done here was elimination of the backup_config for use with
features. Previously, the bridging code upon detecting a feature would set the
start time of the bridge to the start time of the feature. Then after the
feature had either expired or timed out the start time would be reset to the
true bridge start time from the backup_config. Now, the time differences are
calculated with respect to the newly added feature_start_time timeval instead.
There should be no behavior changes from the previous functionality aside from
the bridge timing being unaffected by either valid or partial feature matches.
Previously the timing would be increased by the length of time configured for
featuredigittimeout, which was probably never noticed.
(closes issue #14503)
Reported by: KNK
Tested by: jpeeler
Review: http://reviewboard.digium.com/r/179/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@187211 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r186984 | mmichelson | 2009-04-08 10:26:46 -0500 (Wed, 08 Apr 2009) | 24 lines
Make a couple of changes with regards to a new message printed in ast_read().
"ast_read() called with no recorded file descriptor" is a new message added
after a bug was discovered. Unfortunately, it seems there are a bunch of places
that potentially make such calls to ast_read() and trigger this error message
to be displayed. This commit does two things to help to make this message appear
less.
First, the message has been downgraded to a debug level message if dev mode is
not enabled. The message means a lot more to developers than it does to end users,
and so developers should take an effort to be sure to call ast_read only when
a channel is ready to be read from. However, since this doesn't actually cause an
error in operation and is not something a user can easily fix, we should not spam
their console with these messages.
Second, the message has been moved to after the check for any pending masquerades.
ast_read() being called with no recorded file descriptor should not interfere with
a masquerade taking place.
This could be seen as a simple way of resolving issue #14723. However, I still want
to try to clear out the existing ways of triggering this message, since I feel that
would be a better resolution for the issue.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@186985 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r186832 | mmichelson | 2009-04-07 18:49:49 -0500 (Tue, 07 Apr 2009) | 8 lines
Set the AST_FEATURE_WARNING_ACTIVE flag when a p2p bridge returns AST_BRIDGE_RETRY.
Without this flag set, warning sounds will not be properly played to either party
of the bridge.
(closes issue #14845)
Reported by: adomjan
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@186833 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The channel drivers which have been most heavily tested with these enhancements are
chan_sip and chan_misdn. Further work is being done to add Q.SIG support and will be
introduced in a later commit. chan_skinny has code added to it here, but according
to user pj, the support on chan_skinny is not working as of now. This will be fixed in
a later commit.
A special thanks goes out to bugtracker user gareth for getting the ball rolling and
providing the initial support for this work. Without his initial work on this, this would
not have been nearly as painless as it was.
This functionality has been tested by Digium's product quality department, as well as a
customer site running thousands of calls every day. In addition, many many many many bugtracker
users have tested this, too.
(closes issue #8824)
Reported by: gareth
Review: http://reviewboard.digium.com/r/201
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@186525 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This API call now waits for a special frame from the underlying channel driver to
indicate success or failure. This allows the return value to truly convey whether
the transfer worked or not. In the case of the Transfer() dialplan application this
means the value of the TRANSFERSTATUS dialplan variable is actually true.
(closes issue #12713)
Reported by: davidw
Tested by: file
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@186382 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r185771 | russell | 2009-04-01 08:47:30 -0500 (Wed, 01 Apr 2009) | 6 lines
Fix a case where DTMF could bypass audiohooks.
This change fixes a situation where an audiohook that wants DTMF would not
actually get it. This is in the code path where we end DTMF digit length
emulation while handling a NULL frame.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@185772 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The ability to load/unload timing interfaces is nice, but it means that when a timer is allocated, it may come from provider A, but later provider B becomes the 'preferred' provider. If this happens, all timer API calls on the timer that was provided by provider A will actually be handed to provider B, which will say WTF and return an error.
This patch changes the timer API to include a pointer to the provider of the timer handle so that future operations on the timer will be forwarded to the proper provider.
(closes issue #14697)
Reported by: moy
Review: http://reviewboard.digium.com/r/211/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@184762 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If two channels were bridged together using a generic bridge the T38
control frame would get passed up instead of being indicated on the
other channel.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@183057 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r182810 | russell | 2009-03-17 21:09:13 -0500 (Tue, 17 Mar 2009) | 44 lines
Fix cases where the internal poll() was not being used when it needed to be.
We have seen a number of problems caused by poll() not working properly on
Mac OSX. If you search around, you'll find a number of references to using
select() instead of poll() to work around these issues. In Asterisk, we've
had poll.c which implements poll() using select() internally. However, we
were still getting reports of problems.
vadim investigated a bit and realized that at least on his system, even
though we were compiling in poll.o, the system poll() was still being used.
So, the primary purpose of this patch is to ensure that we're using the
internal poll() when we want it to be used.
The changes are:
1) Remove logic for when internal poll should be used from the Makefile.
Instead, put it in the configure script. The logic in the configure
script is the same as it was in the Makefile. Ideally, we would have
a functionality test for the problem, but that's not actually possible,
since we would have to be able to run an application on the _target_
system to test poll() behavior.
2) Always include poll.o in the build, but it will be empty if AST_POLL_COMPAT
is not defined.
3) Change uses of poll() throughout the source tree to ast_poll(). I feel
that it is good practice to give the API call a new name when we are
changing its behavior and not using the system version directly in all cases.
So, normally, ast_poll() is just redefined to poll(). On systems where
AST_POLL_COMPAT is defined, ast_poll() is redefined to ast_internal_poll().
4) Change poll() in main/poll.c to be ast_internal_poll().
It's worth noting that any code that still uses poll() directly will work fine
(if they worked fine before). So, for example, out of tree modules that are
using poll() will not stop working or anything. However, for modules to work
properly on Mac OSX, ast_poll() needs to be used.
(closes issue #13404)
Reported by: agalbraith
Tested by: russell, vadim
http://reviewboard.digium.com/r/198/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@182847 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This does not change any behavior, but moves the frames from the local frame
list back to the channel read queue using an O(n) algorithm instead of O(n^2).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@182553 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ast_answer(), when supplied a delay before returning to the caller, use ast_safe_sleep() to implement the delay. Unfortunately during this time any incoming frames are discarded, which is problematic for T.38 re-INVITES and other sorts of channel operations.
When a delay is not passed to ast_answer(), it still delays for up to 500 milliseconds, waiting for media to arrive. Again, though, it discards any control frames, or non-voice media frames.
This patch rectifies this situation, by storing all incoming frames during the delay period on a list, and then requeuing them onto the channel before returning to the caller.
http://reviewboard.digium.com/r/196/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@182525 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For a channel that is not yet answered this API call will wait
until a voice frame is received on the channel before returning.
It does this by waiting for frames on the channel and reading them
in. The frames read in were not freed when they should have been.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@182171 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r181423 | russell | 2009-03-11 16:42:58 -0500 (Wed, 11 Mar 2009) | 9 lines
Make code that updates BRIDGEPEER variable thread-safe.
It is not safe to read the name field of an ast_channel without the channel
locked. This patch fixes some places in channel.c where this was being done,
and lead to crashes related to masquerades.
(closes issue #14623)
Reported by: guillecabeza
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@181424 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In app.c, ast_app_getdata is called to stream the prompts and receive DTMF input. If ast_app_getdata() receives an empty string caused by the user inputing the end of string character, in this case '#', it should break from the prompt loop and return to app_read, but instead it cycles through all the prompts. I've added a return value for this special case in ast_readstring() which uses an enum I've delcared in apps.h. This enum is now used as a return value for ast_app_getdata().
(closes issue #14279)
Reported by: Marquis
Patches:
fix_app_read.patch uploaded by Marquis (license 32)
read-ampersanmd.patch2 uploaded by dvossel (license 671)
Tested by: Marquis, dvossel
Review: http://reviewboard.digium.com/r/177/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@180032 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r179741 | russell | 2009-03-03 10:45:46 -0600 (Tue, 03 Mar 2009) | 6 lines
Ensure chan->fdno always gets reset to -1 after handling a channel fd event.
Since setting fdno to -1 had to be moved, a couple of other code paths that
do process an fd event return early and do not pass through the code path
where it was moved to. So, set it to -1 in a few other places, too.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@179742 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r179671 | file | 2009-03-03 10:38:09 -0400 (Tue, 03 Mar 2009) | 3 lines
Move where fdno is set to the default value to *after* the read callback of the channel driver is called.
We have to do this as the underlying channel driver may need the fdno value to determine what to read.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@179672 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r179608 | russell | 2009-03-03 07:53:52 -0600 (Tue, 03 Mar 2009) | 9 lines
Make it easier to detect an improper call to ast_read().
When you call ast_waitfor() on a channel, the index into the channel fds array
that holds the file descriptor that poll() determines has input available is
stored in fdno. This patch clears out this value after a call to ast_read()
and also reports errors if ast_read() is called without an fdno set.
From a discussion on the asterisk-dev list.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@179609 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r179536 | jpeeler | 2009-03-02 17:54:39 -0600 (Mon, 02 Mar 2009) | 15 lines
Fix bridging regression from commit 176701
This fixes a bad regression where the bridge would exit after an attended
transfer was made. The problem was due to nexteventts getting set after the
masquerade which caused the bridge to return AST_BRIDGE_COMPLETE.
(closes issue #14315)
Reported by: tim_ringenbach
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@179537 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r179461 | russell | 2009-03-02 16:58:18 -0600 (Mon, 02 Mar 2009) | 8 lines
Ensure that only one thread is calling ast_settimeout() on a channel at a time.
For example, with an IAX2 channel, you can have both the channel thread and the
chan_iax2 processing threads calling this function, and doing so twice at the
same time is a bad thing.
(Found in a debugging session with dvossel and mmichelson)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@179462 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r176701 | jpeeler | 2009-02-17 15:54:34 -0600 (Tue, 17 Feb 2009) | 17 lines
Modify bridging to properly evaluate DTMF after first warning is played
The main problem is currently if the Dial flag L is used with a warning sound,
DTMF is not evaluated after the first warning sound. To fix this, a flag has
been added in ast_generic_bridge for playing the warning which ensures that if
a scheduled warning is missed, multiple warrnings are not played back (due to a
feature evaluation or waiting for digits). ast_channel_bridge was modified to
store the nexteventts in the ast_bridge_config structure as that information
was lost every time ast_channel_bridge was reentered, causing a hangup due to
incorrect time calculations.
(closes issue #14315)
Reported by: tim_ringenbach
Reviewed on reviewboard:
http://reviewboard.digium.com/r/163/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@176708 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1) Add module use count handling so that timing modules can be unloaded.
2) Implement unload_module() functions for the timing interface modules.
3) Allow multiple timing modules to be loaded, and use the one with the
highest priority value.
4) Report which timing module is being use in the "timing test" CLI command.
(closes issue #14489)
Reported by: russell
Review: http://reviewboard.digium.com/r/162/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@176666 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch includes a number of changes to the indications API. The primary
motivation for this work was to improve stability. The object management
in this API was significantly flawed, and a number of trivial situations could
cause crashes.
The changes included are:
1) Remove the module res_indications. This included the critical functionality
that actually loaded the indications configuration. I have seen many people
have Asterisk problems because they accidentally did not have an
indications.conf present and loaded. Now, this code is in the core,
and Asterisk will fail to start without indications configuration.
There was one part of res_indications, the dialplan applications, which did
belong in a module, and have been moved to a new module, app_playtones.
2) Object management has been significantly changed. Tone zones are now
managed using astobj2, and it is no longer possible to crash Asterisk by
issuing a reload that destroys tone zones while they are in use.
3) The API documentation has been filled out.
4) The API has been updated to follow our naming conventions.
5) Various bits of code throughout the tree have been updated to account
for the API update.
6) Configuration parsing has been mostly re-written.
7) "Code cleanup"
The code is from svn/asterisk/team/russell/indications/.
Review: http://reviewboard.digium.com/r/149/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@176627 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The 'd' option would not work for channel types which use RTP to transport
DTMF digits. The only way to allow for this to work was to answer the channel
if we saw that this option was enabled.
I realized that this may cause issues with CDRs, specifically with giving false
dispositions and answer times. I therefore modified ast_answer to take another
parameter which would tell if the CDR should be marked answered.
I also extended this to the Answer application so that the channel may be answered
but not CDRified if desired.
I also modified app_dictate and app_waitforsilence to only answer the channel if it
is not already up, to help not allow for faulty CDR answer times.
All of these changes are going into Asterisk trunk. For 1.6.0 and 1.6.1, however, all
the changes except for the change to the Answer application will go in since we do
not introduce new features into stable branches
(closes issue #14164)
Reported by: DennisD
Patches:
14164.patch uploaded by putnopvut (license 60)
Tested by: putnopvut
Review: http://reviewboard.digium.com/r/145
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@174945 65c4cc65-6c06-0410-ace0-fbb531ad65f3
We need to do this because while we know that the freeing of the channel may cause something to become
not in use we do not know this for sure. There may be another channel that is still up which would cause
it to be in use.
(closes issue #13238)
Reported by: kowalma
Patches:
20090121__bug13238.diff.txt uploaded by Corydon76 (license 14)
Tested by: alecdavis
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@174844 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r170648 | file | 2009-01-23 16:16:39 -0400 (Fri, 23 Jan 2009) | 4 lines
When a channel is answered make sure any indications currently playing stop. Usually the phone would do this but if the channel was already answered then they are being generated by Asterisk and we darn well need to stop them.
(closes issue #14249)
Reported by: RadicAlish
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@170652 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r170392 | mmichelson | 2009-01-23 09:40:39 -0600 (Fri, 23 Jan 2009) | 28 lines
Fix broken call pickup
There was a subtle change in ast_do_masquerade which
resulted in failed attempts to pickup calls. The problem
was that the value of the AST_FLAG_OUTGOING flag was
copied from the clone to the original channel. In the case
of call pickup, this meant that the AST_FLAG_OUTGOING flag
ended up being cleared on the channel that was attempting
to execute the pickup.
Because this flag was not set, when ast_read came across
an answer frame, it ignored it. The result of this was that
the calling channel was never properly answered.
This fix changes the behavior in ast_do_masquerade to set
the flags on the original channel to the union of the flags
on the clone channel. This way, if the AST_FLAG_OUTGOING
flag is set on either of the two channels involved in the
masquerade, the resulting channel will have the flag set
as well.
(closes issue #14206)
Reported by: francesco_r
Patches:
14206.patch uploaded by putnopvut (license 60)
Tested by: francesco_r, aragon, putnopvut
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@170393 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r166568 | mmichelson | 2008-12-23 09:16:26 -0600 (Tue, 23 Dec 2008) | 12 lines
Fix a crash resulting from a datastore with inheritance but no duplicate callback
The fix for this is to simply set the newly created datastore's data pointer
to NULL if it is inherited but has no duplicate callback.
(closes issue #14113)
Reported by: francesco_r
Patches:
14113.patch uploaded by putnopvut (license 60)
Tested by: francesco_r
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@166569 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This function is being added as a method to allow for
an audiohook to move to a new channel during a channel
masquerade. The most obvious use for such a facility is
for MixMonitor when a transfer is performed. Prior to
the addition of this functionality, if a channel
running MixMonitor was transferred by another party, then
the recording would stop once the transfer had completed.
By using AUDIOHOOK_INHERIT, you can make MixMonitor
continue recording the call even after the transfer
has completed.
It has also been determined that since this is seen
by most as a bug fix and is not an invasive change,
this functionality will also be backported to 1.4 and
merged into the 1.6.0 branches, even though they are
feature-frozen.
(closes issue #13538)
Reported by: mbit
Patches:
13538.patch uploaded by putnopvut (license 60)
Tested by: putnopvut
Review: http://reviewboard.digium.com/r/102/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@166092 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r164201 | russell | 2008-12-15 08:31:37 -0600 (Mon, 15 Dec 2008) | 31 lines
Handle a case where a call can be bridged to a channel that is still ringing.
The issue that was reported was about a case where a RINGING channel got
redirected to an extension to pick up a call from parking. Once the parked
call got taken out of parking, it heard silence until the other side answered.
Ideally, the caller that was parked would get a ringing indication. This patch
fixes this case so that the caller receives ringback once it comes out of
parking until the other side answers.
The fixes are:
- Make sure we remember that a channel was an outgoing channel when doing
a masquerade. This prevents an erroneous ast_answer() call on the channel,
which causes a bogus 200 OK to be sent in the case of SIP.
- Add some additional comments to explain related parts of code.
- Update the handling of the ast_channel visible_indication field. Storing
values that are not stateful is pointless. Control frames that are events
or commands should be ignored.
- When a bridge first starts, check to see if the peer channel needs to be
given ringing indication because the calling side is still ringing.
- Rework ast_indicate_data() a bit for the sake of readability.
(closes issue #13747)
Reported by: davidw
Tested by: russell
Review: http://reviewboard.digium.com/r/90/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@164203 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r163448 | russell | 2008-12-12 07:44:08 -0600 (Fri, 12 Dec 2008) | 26 lines
Resolve issues that could cause DTMF to be processed out of order.
These changes come from team/russell/issue_12658
1) Change autoservice to put digits on the head of the channel's frame readq
instead of the tail. If there were frames on the readq that autoservice
had not yet read, the previous code would have resulted in out of order
processing. This required a new API call to queue a frame to the head
of the queue instead of the tail.
2) Change up the processing of DTMF in ast_read(). Some of the problems
were the result of having two sources of pending DTMF frames. There
was the dtmfq and the more generic readq. Both were used for pending
DTMF in various scenarios. Simplifying things to only use the frame
readq avoids some of the problems.
3) Fix a bug where a DTMF END frame could get passed through when it
shouldn't have. If code set END_DTMF_ONLY in the middle of digit emulation,
and a digit arrived before emulation was complete, digits would get
processed out of order.
(closes issue #12658)
Reported by: dimas
Tested by: russell, file
Review: http://reviewboard.digium.com/r/85/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@163449 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The conversion to use ast_check_hangup() everywhere instead of checking the softhangup
flag directly introduced this problem. The issue is that ast_check_hangup() checked
for tech_pvt to be NULL. Unfortunately, this will be NULL is some valid circumstances,
such as with a dummy channel.
The fix is simple. Don't check tech_pvt. It's pointless, because the code path that
sets this to NULL is when the channel hangup callback gets called. This happens inside
of ast_hangup(), which is the same function responsible for freeing the channel. Any
code calling ast_check_hangup() better not be calling it after that point, and if so,
we have a bigger problem at hand.
(closes issue #14035)
Reported by: erogoza
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@163171 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ast_channel_search_locked need to be made. Specifically, the caller needs to be able to
pass arbitrary data which in turn is passed to the callback. This patch addresses all
of the nested functions currently in asterisk trunk.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@155590 65c4cc65-6c06-0410-ace0-fbb531ad65f3
channel list calling a caller-defined callback. The callback returns non-zero
if a match is found. This should speed up some of the code that I committed
earlier today in chan_sip (which is also updated by this commit).
Reviewed by russellb and kpfleming via ReviewBoard:
http://reviewboard.digium.com/r/28/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@154429 65c4cc65-6c06-0410-ace0-fbb531ad65f3
or when calling ast_waitfor(). These are inappropriate times to hold the channel
lock. This is what has caused "could not get the channel lock" messages from
chan_sip and has likely caused a negative impact on performance results of SIP
in Asterisk 1.6. Thanks to file for pointing out this section of code.
(closes issue #13287)
(closes issue #13115)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@141949 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r140690 | murf | 2008-09-02 16:40:13 -0600 (Tue, 02 Sep 2008) | 1 line
After reconsidering, with respect to 13409, ast_cdr_detach should be OK, better in fact, than ast_cdr_free, which generates lots of useless warnings that will undoubtably generate complaints.
Hmmm. It doesn't hush the useless warnings, but it does allow control of posting via the detach and post routines, for those possible situations,
where you'd want to post single-channel cdrs.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@140692 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r140670 | murf | 2008-09-02 16:15:57 -0600 (Tue, 02 Sep 2008) | 14 lines
(closes issue #13409)
Reported by: tomaso
Patches:
asterisk-1.6.0-rc2-cdrmemleak.patch uploaded by tomaso (license 564)
I basically spent the day, verifying that this patch
solves the problem, and doesn't hurt in non-problem
cases. Why valgrind did not plainly reveal this leak
absolutely mystifies and stuns me.
Many, many thanks to tomaso for finding and providing the fix.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@140691 65c4cc65-6c06-0410-ace0-fbb531ad65f3
would reset to 500 ms every time a non-voice frame
was received. The total time we poll should be 500 ms, so
now we save the amount of time left after the poll returned
and use that as our argument for the next call to poll
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@136633 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Instead, poll the channel until receiving a voice frame. The
cap on this poll is 500 ms.
The optional delay is still allowable in the Answer() application,
but the delay has been moved back to its original position, after
the call to the channel's answer callback. The poll for the voice
frame will not happen if a delay is specified when calling Answer().
(closes issue #12708)
Reported by: kactus
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@136631 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r135841 | mmichelson | 2008-08-05 19:25:10 -0500 (Tue, 05 Aug 2008) | 27 lines
Merging the issue11259 branch.
The purpose of this branch was to take into account
"burps" which could cause jitterbuffers to misbehave.
One such example is if the L option to Dial() were used
to inject audio into a bridged conversation at regular
intervals. Since the audio here was not passed through
the jitterbuffer, it would cause a gap in the jitterbuffer's
timestamps which would cause a frames to be dropped for a
brief period.
Now ast_generic_bridge will empty and reset the jitterbuffer
each time it is called. This causes injected audio to be handled
properly.
ast_generic_bridge also will empty and reset the jitterbuffer
if it receives an AST_CONTROL_SRCUPDATE frame since the change
in audio source could negatively affect the jitterbuffer.
All of this was made possible by adding a new public API call
to the abstract_jb called ast_jb_empty_and_reset.
(closes issue #11259)
Reported by: plack
Tested by: putnopvut
........
r135847 | mmichelson | 2008-08-05 19:27:54 -0500 (Tue, 05 Aug 2008) | 4 lines
Revert inadvertent changes to app_skel that occurred when
I was testing for a memory leak
........
r135850 | mmichelson | 2008-08-05 19:29:54 -0500 (Tue, 05 Aug 2008) | 3 lines
Remove properties that should not be here
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@135851 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r135799 | murf | 2008-08-05 17:13:20 -0600 (Tue, 05 Aug 2008) | 34 lines
(closes issue #12982)
Reported by: bcnit
Tested by: murf
I discovered that also, in the previous bug fixes and changes,
the cdr.conf 'unanswered' option is not being obeyed, so
I fixed this.
And, yes, there are two 'answer' times involved in this
scenario, and I would agree with you, that the first
answer time is the time that should appear in the CDR.
(the second 'answer' time is the time that the bridge
was begun).
I made the necessary adjustments, recording the first
answer time into the peer cdr, and then using that to
override the bridge cdr's value.
To get the 'unanswered' CDRs to appear, I purposely
output them, using the dial cmd to mark them as
DIALED (with a new flag), and outputting them if
they bear that flag, and you are in the right mode.
I also corrected one small mention of the Zap device
to equally consider the dahdi device.
I heavily tested 10-sec-wait macros in dial, and
without the macro call; I tested hangups while the
macro was running vs. letting the macro complete
and the bridge form. Looks OK. Removed all the
instrumentation and debug.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@135821 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r133649 | tilghman | 2008-07-25 12:19:39 -0500 (Fri, 25 Jul 2008) | 8 lines
Fix some errant device states by making the devicestate API more strict in
terms of the device argument (only without the unique identifier appended).
(closes issue #12771)
Reported by: davidw
Patches:
20080717__bug12771.diff.txt uploaded by Corydon76 (license 14)
Tested by: davidw, jvandal, murf
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@133665 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r127663 | murf | 2008-07-02 18:16:25 -0600 (Wed, 02 Jul 2008) | 30 lines
The CDRfix4/5/6 omnibus cdr fixes.
(closes issue #10927)
Reported by: murf
Tested by: murf, deeperror
(closes issue #12907)
Reported by: falves11
Tested by: murf, falves11
(closes issue #11849)
Reported by: greyvoip
As to 11849, I think these changes fix the core problems
brought up in that bug, but perhaps not the more global
problems created by the limitations of CDR's themselves
not being oriented around transfers.
Reopen if necc, but bug reports are not the best
medium for enhancement discussions. We need to start
a second-generation CDR standardization effort to cover
transfers.
(closes issue #11093)
Reported by: rossbeer
Tested by: greyvoip, murf
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@127793 65c4cc65-6c06-0410-ace0-fbb531ad65f3
callback. This change differs from commit 127113 in that now the
channel is not set to AST_STATE_UP until after the answer callback.
(closes issue #12924)
Reported by: snyfer
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@127157 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- change ast_settimeout() to honor max rate in edge cases of file playback
(this will make some warning messages go away at the end of playing back
a file)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@125332 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r125132 | kpfleming | 2008-06-25 17:21:30 -0500 (Wed, 25 Jun 2008) | 10 lines
allow tonezone to live in a different place than DAHDI/Zaptel, since dahdi-tools and dahdi-linux are now separate packages and can be installed in different places
don't include tonezone.h in dahdi_compat.h, because only a couple of modules need it
get app_rpt building again after the DAHDI changes
(closes issue #12911)
Reported by: tzafrir
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@125138 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Convert the last part of channel.c over to use the timing API. This would
not have made a difference when using the dahdi timing module. I noticed
it when trying to use another timing source. Oops. :)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@122923 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Convert chan_iax2 to use the timing API
- Convert usage of timing in the core to use the timing API instead of
using DAHDI directly
- Make a change to the timing API to add the set_rate() function
- change the timing core to use a rwlock
- merge a timing implementation, res_timing_dahdi
Basic testing was successful using res_timing_dahdi
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@122523 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r122130 | tilghman | 2008-06-12 10:11:30 -0500 (Thu, 12 Jun 2008) | 4 lines
Occasionally, the alertpipe loses its nonblocking status, so detect and correct
that situation before it causes a deadlock. (Reported and tested by ctooley
via #asterisk-dev)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@122131 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r121280 | russell | 2008-06-09 11:35:40 -0500 (Mon, 09 Jun 2008) | 10 lines
Do not attempt to do emulation if an END digit is received and the length is
less than the defined minimum digit length, and the other end only wants END
digits (SIP INFO, for example).
(closes issue #12778)
Reported by: tsearle
Patches:
12778.rev1.txt uploaded by russell (license 2)
Tested by: tsearle
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@121282 65c4cc65-6c06-0410-ace0-fbb531ad65f3
hold tracking information for mutexes. Now, the "core show locks" output
will output information about who is holding a rwlock when a thread is
waiting on it.
(closes issue #11279)
Reported by: ys
Patches:
trunk_lock_utils.v8.diff uploaded by ys (license 281)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@120064 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- make data member of the ast_frame struct a named union instead of a void
Recently the ast_queue_hangup function got a new parameter, the hangupcause
Feedback came in that this is no good and that instead a new function should be created.
This I did.
The hangupcause was stored in the seqno member of the ast_frame struct. This is not very
elegant, and since there's already a data member that one should be used.
Problem is, this member was a void *.
Now it's a named union so it can hold a pointer, an uint32 and there's a padding in case someone
wants to store another type in there in the future.
This commit is so massive, because all ast_frame.data uses have to be
altered to ast_frame.data.data
Thanks russellb and kpfleming for the feedback.
(closes issue #12674)
Reported by: mvanbaak
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@117802 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r116088 | mmichelson | 2008-05-13 18:47:49 -0500 (Tue, 13 May 2008) | 12 lines
A change to the way channel locks are handled when DEBUG_CHANNEL_LOCKS is defined.
After debugging a deadlock, it was noticed that when DEBUG_CHANNEL_LOCKS
is enabled in menuselect, the actual origin of channel locks is obscured
by the fact that all channel locks appear to happen in the function
ast_channel_lock(). This code change redefines ast_channel_lock to be a
macro which maps to __ast_channel_lock(), which then relays the proper
file name, line number, and function name information to the core lock
functions so that this information will be displayed in the case that
there is some sort of locking error or core show locks is issued.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@116089 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r114117 | mmichelson | 2008-04-14 12:41:03 -0500 (Mon, 14 Apr 2008) | 11 lines
Increase the retry count when attempting to show channels. This apparently
cleared an issue someone was seeing when attempting to show channels when
the load was high.
(closes issue #11667)
Reported by: falves11
Patches:
11677.txt uploaded by russell (license 2)
Tested by: falves11
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114118 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r114106 | mmichelson | 2008-04-14 09:58:02 -0500 (Mon, 14 Apr 2008) | 5 lines
Save a local copy of the generate callback prior to unlocking the channel in
case the generate callback goes NULL on us after the channel is unlocked. Thanks
to Russell for pointing this need out to me.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114107 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r113065 | mmichelson | 2008-04-07 11:08:45 -0500 (Mon, 07 Apr 2008) | 13 lines
This fix prevents a deadlock that was experienced in chan_local. There was
deadlock prevention in place in chan_local, but it would not work in a specific
case because the channel was recursively locked. By unlocking the channel prior
to calling the generator's generate callback in ast_read_generator_actions(), we
prevent the recursive locking, and therefore the deadlock.
(closes issue #12307)
Reported by: callguy
Patches:
12307.patch uploaded by putnopvut (license 60)
Tested by: callguy
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@113066 65c4cc65-6c06-0410-ace0-fbb531ad65f3
G.722 music on hold working for me.
(issue #12164, reported by milazzo and jsmith, patches by me)
res/res_musiconhold.c:
- I moved a single line so that the sample queue update happened before
ast_write(). The reason that this was a bug is that the G.722 frame
originally says it has 320 samples in it (which is correct). However,
when the frame is written to a channel that uses RTP, main/rtp.c modifies
the frame to cut the number of samples in half before it sends it on
the wire. This is to account for the stupid incorrect G.722 spec that
makes it so we have to lie about the number of samples with RTP. I should
probably go and re-work the RTP code so it doesn't modify the frame so
that a bug like this won't happen in the future. However, this change to
MOH is harmless.
main/channel.c:
- I made two fixes in regards to generator timing. Generators use samples
for timing. However, this code assumed 8 kHz samples. In one case, it was
a hard coded 160 samples, that is now written as the sample rate / 50. The
other place was dealing with timing a generator based on frames coming from
the other direction. However, that would have only worked if the sample
rates for the formats in both directions were the same. The code now takes
into account that the sample rates may differ, and scales the generator
samples accordingly.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@110268 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r108583 | russell | 2008-03-13 16:38:16 -0500 (Thu, 13 Mar 2008) | 11 lines
Fix another issue that was causing crashes in chanspy. This introduces a new
datastore callback, called chan_fixup(). The concept is exactly like the
fixup callback that is used in the channel technology interface. This callback
gets called when the owning channel changes due to a masquerade. Before this
was introduced, if a masquerade happened on a channel being spyed on, the
channel pointer in the datastore became invalid.
(closes issue #12187)
(reported by, and lots of testing from atis)
(props to file for the help with ideas)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@108584 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r108135 | russell | 2008-03-12 14:57:42 -0500 (Wed, 12 Mar 2008) | 40 lines
(closes issue #12187, reported by atis, fixed by me after some brainstorming
on the issue with mmichelson)
- Update copyright info on app_chanspy.
- Fix a race condition that caused app_chanspy to crash. The issue was that
the chanspy datastore magic that was used to ensure that spyee channels did
not disappear out from under the code did not completely solve the problem.
It was actually possible for chanspy to acquire a channel reference out of
its datastore to a channel that was in the middle of being destroyed. That
was because datastore destruction in ast_channel_free() was done near the
end. So, this left the code in app_chanspy accessing a channel that was
partially, or completely invalid because it was in the process of being free'd
by another thread. The following sort of shows the code path where the race
occurred:
=============================================================================
Thread 1 (PBX thread for spyee chan) || Thread 2 (chanspy)
--------------------------------------||-------------------------------------
ast_channel_free() ||
- remove channel from channel list ||
- lock/unlock the channel to ensure ||
that no references retrieved from ||
the channel list exist. ||
--------------------------------------||-------------------------------------
|| channel_spy()
- destroy some channel data || - Lock chanspy datastore
|| - Retrieve reference to channel
|| - lock channel
|| - Unlock chanspy datastore
--------------------------------------||-------------------------------------
- destroy channel datastores ||
- call chanspy datastore d'tor ||
which NULL's out the ds' || - Operate on the channel ...
reference to the channel ||
||
- free the channel ||
||
|| - unlock the channel
--------------------------------------||-------------------------------------
=============================================================================
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@108137 65c4cc65-6c06-0410-ace0-fbb531ad65f3
LIST instead of an RWLIST. The way this list works makes it such that
a RWLIST provides no additional benefit. Also, a mutex is needed for
use with the thread condition.
Merged revisions 105563 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r105563 | russell | 2008-03-03 09:50:43 -0600 (Mon, 03 Mar 2008) | 24 lines
Merge in some changes from team/russell/autoservice-nochans-1.4
These changes fix up some dubious code that I came across while auditing what
happens in the autoservice thread when there are no channels currently in
autoservice.
1) Change it so that autoservice thread doesn't keep looping around calling
ast_waitfor_n() on 0 channels twice a second. Instead, use a thread condition
so that the thread properly goes to sleep and does not wake up until a
channel is put into autoservice.
This actually fixes an interesting bug, as well. If the autoservice thread
is already running (almost always is the case), then when the thread goes
from having 0 channels to have 1 channel to autoservice, that channel would
have to wait for up to 1/2 of a second to have the first frame read from it.
2) Fix up the code in ast_waitfor_nandfds() for when it gets called with no
channels and no fds to poll() on, such as was the case with the previous code
for the autoservice thread. In this case, the code would call alloca(0), and
pass the result as the first argument to poll(). In this case, the 2nd
argument to poll() specified that there were no fds, so this invalid pointer
shouldn't actually get dereferenced, but, this code makes it explicit and
ensures the pointers are NULL unless we have valid data to put there.
(related to issue #12116)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@105564 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r105560 | file | 2008-03-03 11:28:59 -0400 (Mon, 03 Mar 2008) | 7 lines
It is possible for no audio to pass between the current digit and next digit so expand logic that clears emulation to AST_FRAME_NULL.
(closes issue #11911)
Reported by: edgreenberg
Patches:
v1-11911.patch uploaded by dimas (license 88)
Tested by: tbsky
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@105561 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r100581 | russell | 2008-01-28 11:15:41 -0600 (Mon, 28 Jan 2008) | 9 lines
Make some deadlock related fixes. These bugs were discovered and reported
internally at Digium by Steve Pitts.
- Fix up chan_local to ensure that the channel lock is held before the local
pvt lock.
- Don't hold the channel lock when executing the timing function, as it can
cause a deadlock when using chan_local. This actually changes the code back
to be how it was before the change for issue #10765. But, I added some other
locking that I think will prevent the problem reported there, as well.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@100582 65c4cc65-6c06-0410-ace0-fbb531ad65f3
today on another mac. We ignore the return value of locking operations almost
everywhere in Asterisk. So, ignore these, as well, so Asterisk will actually
work on systems where this is occurring while I look into what the issue is.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@100514 65c4cc65-6c06-0410-ace0-fbb531ad65f3
as a channel variable BRIDGEPVTCALLID
This is important for call tracing in log files and CDRs, so that
the SIP callID can be traced along servers.
The CHANNEL dialplan function won't work here, since the outbound
channel is gone when we need the Call-ID.
Other channel drivers may now implement the same function :-),
but this patch only supports chan_sip.so.
Inspired by (issue #11816)
Reported by: ctooley
Patch by oej
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@99644 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r95024 | russell | 2007-12-27 15:40:02 -0600 (Thu, 27 Dec 2007) | 9 lines
Don't report a syntax error when an empty string is passed to ast_get_group.
Just return 0.
(closes issue #11540)
Reported by: tzafrir
Patches:
group_empty.diff uploaded by tzafrir (license 46)
-- slightly changed by me
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@95025 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r94767 | tilghman | 2007-12-24 13:36:59 -0600 (Mon, 24 Dec 2007) | 5 lines
Race: we need to wait to queue a NewChannel event until after the channel is
inserted into the channel list. The reason is because some manager users
immediately queue requests from the channel when they see that event and are
confused when Asterisk reports no such channel. (Closes issue #11632)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@94768 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r93625 | mmichelson | 2007-12-18 11:02:48 -0600 (Tue, 18 Dec 2007) | 6 lines
Rework deadlock avoidance used in ast_write, since it meant that agent channels which were being monitored
had one audio file recorded and one empty audio file saved.
(closes issue #11529, reported by atis patched by me)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@93626 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Newstate event
- Now has "CalleridNum" for numeric caller id, like Newchannel
- The event does not send "<unknown>" for unknown caller IDs just an empty field
- Newstate and Newchannel events
- these have changed headers
"State" -> ChannelStateDesc Text based channel state
-> ChannelState Numeric channel state
- The events does not send "<unknown>" for unknown caller IDs just an empty field
- Newstate event
- Now has "CalleridNum" for numeric caller id, like Newchannel
- The event does not send "<unknown>" for unknown caller IDs just an empty field
- Link and Unlink events
- The "Link" and "Unlink" bridge events in channel.c are now renamed to "Bridge"
- The link state is in the bridgestate: header as "Link" or "Unlink"
- For channel.c bridges, "Bridgetype: core" is added. This opens up for
bridge events in rtp.c and channel drivers
- The "Rename" manager event has a renamed header, to use the same
terminology for the current channel as other events
- Oldname -> Channel
(Moremanager)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@91409 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r90145 | russell | 2007-11-28 18:20:34 -0600 (Wed, 28 Nov 2007) | 5 lines
This set of changes is to make some callerID handling thread-safe.
The ast_set_callerid() function needed to lock the channel. Also, the handlers
for the CALLERID() dialplan function needed to lock the channel when reading
or writing callerid values directly on the channel structure.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@90146 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89577 | file | 2007-11-26 11:34:38 -0400 (Mon, 26 Nov 2007) | 6 lines
If channel allocation fails because the alert pipe could not be created also free the scheduler context.
(closes issue #11355)
Reported by: eliel
Patches:
main.channel.c.patch uploaded by eliel (license 64)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89578 65c4cc65-6c06-0410-ace0-fbb531ad65f3
build times - tested, there is no measureable difference before and
after this commit.
In this change:
use asterisk/compat.h to include a small set of system headers:
inttypes.h, unistd.h, stddef.h, stddint.h, sys/types.h, stdarg.h,
stdlib.h, alloca.h, stdio.h
Where available, the inclusion is conditional on HAVE_FOO_H as determined
by autoconf.
Normally, source files should not include any of the above system headers,
and instead use either "asterisk.h" or "asterisk/compat.h" which does it
better.
For the time being I have left alone second-level directories
(main/db1-ast, etc.).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89333 65c4cc65-6c06-0410-ace0-fbb531ad65f3
through ast_mutex primitives.
To detect all occurrences, I have renamed the lock field in struct ast_channel
so it is clear that it shouldn't be used directly.
There are some uses in res/res_features.c (see details of the diff)
that are error prone as they try and lock two channels without
caring about the order (or without explaining why it is safe).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89293 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Richard Mudgett
David Vossel
Tilghman Lesher
Jeff Peeler
Russell Bryant
Leif Madsen
Kevin P. Fleming
Matthew Nicholson
Mark Michelson
Joshua Colp
Eliel C. Sardanons
Olle Johansson
Sean Bright
Steve Murphy
Brett Bryant
Michiel van Baak
Jason Parker
Luigi Rizzo