https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r162286 | russell | 2008-12-09 14:57:35 -0600 (Tue, 09 Dec 2008) | 9 lines
Fix an issue where callers on an incoming call on an SLA trunk would not hear ringback.
We need to make sure that we don't start writing audio to the trunk channel until we're
actually ready to answer it. Otherwise, the channel driver will treat it as inband
progress, even though all they are getting is silence.
(closes issue #12471)
Reported by: mthomasslo
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@162291 65c4cc65-6c06-0410-ace0-fbb531ad65f3
add 1 to the priority when checking if the extension exists. Otherwise,
gosubs will fail.
This was discovered when investigating an asterisk-users mailing list post
made by Gary Hawkins.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@161493 65c4cc65-6c06-0410-ace0-fbb531ad65f3
emailbody and pagerbody to CR-LF so that the IMAP server doesn't spit out an
error. This was informally reported on #asterisk-dev a few weeks ago. Reviewed
by Mark M. on IRC.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@161349 65c4cc65-6c06-0410-ace0-fbb531ad65f3
for app_dial and app_queue to run a gosub when the call is answered.
* Check for the existence of the gosub target in gosub_exec. If it is nonexistent,
then this will cause errors when we attempt to actually run the gosub, including
a definite memory leak and potential crashes. Return an error in this situation
* Check the return value of pbx_exec in app_dial and app_queue before attempting
to actually run the gosub routine. If there was an error, we should not attempt
to run the gosub.
* Change a '|' to a ',' in app_queue.
* Add some extra curly braces where they had been missing previously.
(closes issue #13548)
Reported by: fiddur
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@160626 65c4cc65-6c06-0410-ace0-fbb531ad65f3
handling in app_queue was just completely wrong, mostly
because the channel operations being performed were being
done on the incorrect channel.
With this set of changes, a gosub will correctly run on
the answering queue member's channel. There are still crash
issues which occur if there are dialplan syntax errors, so
I cannot yet close the referenced issue.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@160555 65c4cc65-6c06-0410-ace0-fbb531ad65f3
a call fails
1) Hang up the original destination if the local channel cannot
be requested.
2) Hang up the local channel (in addition to the original destination)
if ast_call fails when calling the newly created local channel.
This prevents channels from sticking around forever in the
case of a botched call forward (e.g. to an extension which does not
exist).
(closes issue #13764)
Reported by: davidw
Patches:
13764_v2.patch uploaded by putnopvut (license 60)
Tested by: putnopvut, davidw
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@159554 65c4cc65-6c06-0410-ace0-fbb531ad65f3
for the "pls_hold_prompt" option. This does not affect any released
version of Asterisk, so there is no need to update the CHANGES
file for this.
(closes issue #13893)
Reported by: eliel
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@159250 65c4cc65-6c06-0410-ace0-fbb531ad65f3
it would be best to maintain API compatibility. Instead, this commit introduces
ao2_callback_data() which is functionally identical to ao2_callback() except
that it allows you to pass arbitrary data to the callback.
Reviewed by Mark Michelson via ReviewBoard:
http://reviewboard.digium.com/r/64
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@158959 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r158053 | mmichelson | 2008-11-20 11:33:06 -0600 (Thu, 20 Nov 2008) | 12 lines
Make sure to set the hangup cause on the calling channel in the case
that ast_call() fails. For incoming SIP channels, this was causing
us to send a 603 instead of a 486 when the call-limit was reached on
the destination channel.
(closes issue #13867)
Reported by: still_nsk
Patches:
13867.diff uploaded by putnopvut (license 60)
Tested by: blitzrage
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@158066 65c4cc65-6c06-0410-ace0-fbb531ad65f3
also, move UPGRADE.txt to UPGRADE-1.6.txt and make the new UPGRADE.txt contain information about upgrading between Asterisk 1.6 releases
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@157706 65c4cc65-6c06-0410-ace0-fbb531ad65f3
is in use so that the message is deleted from both
local and IMAP storage.
(closes issue #13642)
Reported by: jaroth
Patches:
deleteyes.patch uploaded by jaroth (license 50)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@157562 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r157365 | jpeeler | 2008-11-18 13:13:33 -0600 (Tue, 18 Nov 2008) | 6 lines
(closes issue #13899)
Reported by: akkornel
This fix is the result of a bug fix in ast_app_separate_args r124395. If an argument does not exist it should always be set to a null string rather than a null pointer.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@157366 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r157305 | mmichelson | 2008-11-18 12:25:55 -0600 (Tue, 18 Nov 2008) | 12 lines
Fix a crash in the end_bridge_callback of app_dial and
app_followme which would occur at the end of an attended
transfer. The error occurred because we initially stored
a pointer to an ast_channel which then was hung up due
to a masquerade.
This commit adds a "fixup" callback to the bridge_config
structure to allow for end_bridge_callback_data to be
changed in the case that a new channel pointer is needed
for the end_bridge_callback.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@157306 65c4cc65-6c06-0410-ace0-fbb531ad65f3
a function: in these cases, we have to use the heap, or garbage will result.
(closes issue #13898)
Reported by: alecdavis
Patches:
20081114__bug13898__2.diff.txt uploaded by Corydon76 (license 14)
Tested by: alecdavis
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@157253 65c4cc65-6c06-0410-ace0-fbb531ad65f3
hashing used by app_queue.c to be case-insensitive.
This is accomplished by adding a new case-insensitive
hashing function.
This was necessary to prevent bad refcount errors
(and potential crashes) which would occur due to the
fact that queues were initially read from the config
file in a case-sensitive manner. Then, when a user
issued a CLI command or manager action, we allowed
for case-insensitive input and used that input to
directly try to find the queue in the hash table. The result
was either that we could not find a queue that was input or
worse, we would end up hashing to a completely bogus value
based on the input.
This commit resolves the problem presented in
issue #13703. However, that issue was reported against
1.6.0. Since this fix introduces a behavior change, I am
electing to not place this same fix in to the 1.6.0 or 1.6.1
branches, and instead will opt for a change which does not
change behavior.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@156883 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r156816 | mmichelson | 2008-11-14 09:18:59 -0600 (Fri, 14 Nov 2008) | 10 lines
If the prompt to reenter a voicemail password timed out, it
resulted in the password not being saved, even if the input matched
what you gave when first prompted to enter a new password. This is
because the return value of ast_readstring was checked, but not checked
properly.
This bug was discovered by Jared Smith during an Asterisk training course.
Thanks for reporting it!
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@156817 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r156755 | tilghman | 2008-11-13 18:41:37 -0600 (Thu, 13 Nov 2008) | 6 lines
ast_waitfordigit() requires that the channel be up, for no good logical
reason. This prevents While/EndWhile from working within the "h"
extension.
Reported by: jgalarneau (for ABE C.2)
Fixed by: me
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@156756 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- MeetMe()
- MeetMeCount()
- MeetMeChannelAdmin()
- MeetMeAdmin()
- SLAStation()
- SLATrunk()
- Add an attribute to optionlist 'hasparams' with the same functionality as the one
we have in <parameter> and <argument> (the DTD was updated)
- Fix a leak when getting an attribute while parsing an <optionlist>.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@156575 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r156178 | jpeeler | 2008-11-12 11:53:44 -0600 (Wed, 12 Nov 2008) | 8 lines
(closes issue #13173)
Reported by: pep
This change adds an announce_thread responsible for playing announcements to an existing conference. This allows all announcing to be immediately stopped if necessary but more importantly allows other threads that need to play something to not block. There are multiple benefits to this, but the actual bug is for solving the scenario for a channel to be unusable after hang up for the entire duration of the parting announcement. The parting announcement can be extremely long depending on what the user recorded upon joining the conference.
Reviewed by Russell on Review Board:
http://reviewboard.digium.com/r/25/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@156228 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r156167 | mmichelson | 2008-11-12 11:38:33 -0600 (Wed, 12 Nov 2008) | 7 lines
When doing some tests, I was having a crash at the end of every call
if an attended transfer occurred during the call. I traced the cause to
the CDR on one of the channels being NULL. murf suggested a check in
the end bridge callback to be sure the CDR is non-NULL before proceeding,
so that's what I'm adding.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@156169 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ast_channel_search_locked need to be made. Specifically, the caller needs to be able to
pass arbitrary data which in turn is passed to the callback. This patch addresses all
of the nested functions currently in asterisk trunk.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@155590 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ao2_callback and ao2_find). Currently, passing OBJ_POINTER to either
of these mandates that the passed 'arg' is a hashable object, making
searching for an ao2 object based on outside criteria difficult.
Reviewed by Russell and Mark M. via ReviewBoard:
http://reviewboard.digium.com/r/36/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@155401 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Russell Bryant
Joshua Colp
Eliel C. Sardanons
Mark Michelson
Sean Bright
Tilghman Lesher
Kevin P. Fleming
Terry Wilson
Matthew Nicholson
Jeff Peeler