https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r277568 | tilghman | 2010-07-16 16:54:29 -0500 (Fri, 16 Jul 2010) | 8 lines
Since we split values at the semicolon, we should store values with a semicolon as an encoded value.
(closes issue #17369)
Reported by: gkservice
Patches:
20100625__issue17369.diff.txt uploaded by tilghman (license 14)
Tested by: tilghman
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@277773 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds a generic API for accommodating IPv6 and IPv4 addresses
within Asterisk. While many files have been updated to make use of the
API, chan_sip and the RTP code are the files which actually support
IPv6 addresses at the time of this commit. The way has been paved for
easier upgrading for other files in the near future, though.
Big thanks go to Simon Perrault, Marc Blanchet, and Jean-Philippe Dionne
for their hard work on this.
(closes issue #17565)
Reported by: russell
Patches:
asteriskv6-test-report.pdf uploaded by russell (license 2)
Review: https://reviewboard.asterisk.org/r/743
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@274783 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r241015 | seanbright | 2010-01-18 14:54:19 -0500 (Mon, 18 Jan 2010) | 12 lines
Plug a memory leak when reading configs with their comments.
While reading through configuration files with the intent of returning their
full contents (comments specifically) we allocated some memory and then forgot
to free it. This doesn't fix 16554 but clears up a leak I had in the lab.
(issue #16554)
Reported by: mav3rick
Patches:
issue16554_20100118.patch uploaded by seanbright (license 71)
Tested by: seanbright
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@241016 65c4cc65-6c06-0410-ace0-fbb531ad65f3
when a save occurs to a different filename, everything goes to the alternate
filename, instead of appending to the original. This is important for the
AMI command UpdateConfig.
(closes issue #13301)
Reported by: trevo
Patches:
20081113__bug13301.diff.txt uploaded by Corydon76 (license 14)
20081113__bug13301__1.6.0.diff.txt uploaded by Corydon76 (license 14)
Tested by: Corydon76, blitzrage
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@161181 65c4cc65-6c06-0410-ace0-fbb531ad65f3
it would be best to maintain API compatibility. Instead, this commit introduces
ao2_callback_data() which is functionally identical to ao2_callback() except
that it allows you to pass arbitrary data to the callback.
Reviewed by Mark Michelson via ReviewBoard:
http://reviewboard.digium.com/r/64
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@158959 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: alex70
Patches:
13420.13539.patch uploaded by murf (license 17)
Tested by: murf, awk
This fixes two problems: a spurious linefeed insertion
probably left over from pre-precomment times. Only
generated when category had no previous comments.
The other problem: Insertions could get the line-numbering
out of whack and generate negative line numbers, causing
chunks of line numbers to be emitted, on the scale of the
number of lines up to that point in the file. In such cases,
abort the looping, and all is well.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@157302 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ao2_callback and ao2_find). Currently, passing OBJ_POINTER to either
of these mandates that the passed 'arg' is a hashable object, making
searching for an ao2 object based on outside criteria difficult.
Reviewed by Russell and Mark M. via ReviewBoard:
http://reviewboard.digium.com/r/36/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@155401 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit introduces the first phase of an effort to manage documentation of the
interfaces in Asterisk in an XML format. Currently, a new format is available for
applications and dialplan functions. A good number of conversions to the new format
are also included.
For more information, see the following message to asterisk-dev:
http://lists.digium.com/pipermail/asterisk-dev/2008-October/034968.html
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@153365 65c4cc65-6c06-0410-ace0-fbb531ad65f3
'update2', which permits updates which match across multiple columns, instead
of requiring all tables to have a single unique identifier. All of the other
API calls with the exception of 'update' already had the ability to match on
multiple fields, so it was a missing and very desireable feature that an API
call implementing an update should have this, too.
This does not change any outward performance of Asterisk, but it should make
life easier for application developers who use the RealTime framework.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@148570 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: nickpeirson
Patches:
pbx.c.patch uploaded by nickpeirson (license 579)
replace_bzero+bcopy.patch uploaded by nickpeirson (license 579)
Tested by: nickpeirson, murf
1. replaced all refs to bzero and bcopy to memset and memmove instead.
2. added a note to the CODING-GUIDELINES
3. add two macros to asterisk.h to prevent bzero, bcopy from creeping
back into the source
4. removed bzero from configure, configure.ac, autoconfig.h.in
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@147807 65c4cc65-6c06-0410-ace0-fbb531ad65f3
when a file is invalid from when a file is missing. This is most important when
we have two configuration files. Consider the following example:
Old system:
sip.conf users.conf Old result New result
======== ========== ========== ==========
Missing Missing SIP doesn't load SIP doesn't load
Missing OK SIP doesn't load SIP doesn't load
Missing Invalid SIP doesn't load SIP doesn't load
OK Missing SIP loads SIP loads
OK OK SIP loads SIP loads
OK Invalid SIP loads incompletely SIP doesn't load
Invalid Missing SIP doesn't load SIP doesn't load
Invalid OK SIP doesn't load SIP doesn't load
Invalid Invalid SIP doesn't load SIP doesn't load
So in the case when users.conf doesn't load because there's a typo that
disrupts the syntax, we may only partially load users, instead of failing with
an error, which may cause some calls not to get processed. Worse yet, the old
system would do this with no indication that anything was even wrong.
(closes issue #10690)
Reported by: dtyoo
Patches:
20080716__bug10690.diff.txt uploaded by Corydon76 (license 14)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@142992 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r140488 | mmichelson | 2008-08-29 12:34:17 -0500 (Fri, 29 Aug 2008) | 22 lines
After working on the ao2_containers branch, I noticed
something a bit strange. In all cases where we provide
a callback function to ao2_container_alloc, the callback
function would only return 0 or CMP_MATCH. After inspecting
the ao2_callback() code carefully, I found that if you're
only looking for one specific item, then you should return
CMP_MATCH | CMP_STOP. Otherwise, astobj2 will continue
traversing the current bucket until the end searching for
more matches.
In cases like chan_iax2 where in 1.4, all the peers are
shoved into a single bucket, this makes for potentially
terrible performance since the entire bucket will be
traversed even if the peer is one of the first ones come
across in the bucket.
All the changes I have made were for cases where the
callback function defined was passed to ao2_container_alloc
so that calls to ao2_find could find a unique instance
of whatever object was being stored in the container.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@140489 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r120173 | jpeeler | 2008-06-03 17:15:33 -0500 (Tue, 03 Jun 2008) | 6 lines
(closes issue #11594)
Reported by: yem
Tested by: yem
This change decreases the buffer size allocated on the stack substantially in config_text_file_load when LOW_MEMORY is turned on. This change combined with the fix from revision 117462 (making mkintf not copy the zt_chan_conf structure) was enough to prevent the crash.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@120174 65c4cc65-6c06-0410-ace0-fbb531ad65f3
a configuration file. As it was, only the first did so. This led to
a problem if the included file was changed (but not the configuration
file which includes it) and the second source file attempted to reload
the configuration. It would not see that the included file had changed.
In this particular example, res_phoneprov and chan_sip both loaded
sip.conf, which included a file call sip.peers.conf. Since res_phoneprov
was the first to load sip.conf, only it cached the fact that sip.conf
included sip.peers.conf. If sip.peers.conf were changed and sip.conf were
not and a sip reload were issued (meaning that chan_sip attempts to
reload sip.conf only if it and its included files have changed) the changes
made to sip.peers.conf would not be seen and therefore no action would be
taken.
(closes issue #12693)
Reported by: marsosa
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@117367 65c4cc65-6c06-0410-ace0-fbb531ad65f3
being #included twice. This was due to the fact that #exec created a temporary file which
was then #included. The name of the temporary file was the name of the #exec'd file, with
the Unix timestamp and thread ID concatenated. The issue was that if multiple #exec statements
of the same file were reached in the same second, then the result was that the temporary files
would have duplicate names. To resolve this, the temporary file now has microsecond resolution
for the timestamp portion.
(closes issue #12574)
Reported by: jmls
Patches:
12574.patch uploaded by putnopvut (license 60)
Tested by: jmls, putnopvut
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@115329 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r109908 | murf | 2008-03-19 09:41:13 -0600 (Wed, 19 Mar 2008) | 72 lines
(closes issue #11442)
Reported by: tzafrir
Patches:
11442.patch uploaded by murf (license 17)
Tested by: murf
I didn't give tzafrir very much time to test this, but if he does
still have remaining issues, he is welcome to
re-open this bug, and we'll do what is called for.
I reproduced the problem, and tested the fix, so I hope I
am not jumping by just going ahead and committing the fix.
The problem was with what file_save does with templates;
firstly, it tended to print out multiple options:
[my_category](!)(templateref)
instead of
[my_category](!,templateref)
which is fixed by this patch.
Nextly, the code to suppress output of duplicate declarations
that would occur because the reader copies inherited declarations
down the hierarchy, was not working. Thus:
[master-template](!)
mastervar = bar
[template](!,master-template)
tvar = value
[cat](template)
catvar = val
would be rewritten as:
;!
;! Automatically generated configuration file
;! Filename: experiment.conf (/etc/asterisk/experiment.conf)
;! Generator: Manager
;! Creation Date: Tue Mar 18 23:17:46 2008
;!
[master-template](!)
mastervar = bar
[template](!,master-template)
mastervar = bar
tvar = value
[cat](template)
mastervar = bar
tvar = value
catvar = val
This has been fixed. Since the config reader 'explodes' inherited
vars into the category, users may, in certain circumstances, see
output different from what they originally entered, but it should
be both correct and equivalent.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@109942 65c4cc65-6c06-0410-ace0-fbb531ad65f3
caching would not work properly for users.conf and any other file read from
more than one place. I needed to add the filename which requested the config
file to get it to work properly.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@107791 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r104092 | qwell | 2008-02-25 14:49:42 -0600 (Mon, 25 Feb 2008) | 11 lines
Allow the use of #include and #exec in situations where the max include depth was only 1.
Specifically, this fixes using #include and #exec in extconfig.conf.
This was basically caused because the config file itself raises the include level to 1.
I opted not to raise the include limit, because recursion here could cause very bizarre behavior.
Pointed out, and tested by jmls
(closes issue #12064)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@104093 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added ability to retrieve list of categories in a config file.
Added ability to retrieve the content of a particular category.
Added ability to empty a context.
Created new action to create a new file.
Updated delete action to allow deletion by line number with respect to category.
Added new action insert to add new variable to category at specified line.
Updated action newcat to allow new category to be inserted in file above another existing category.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@103331 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Andrew Latham
Sean Bright
Jason Parker
Tilghman Lesher
Mark Michelson
Paul Belanger
Ryan Brindley
Olle Johansson
Eliel C. Sardanons
Steve Murphy
Russell Bryant
BJ Weschke
Jeff Peeler