* acl (named_acl.c)
* cdr
* cel
* ccss
* dnsmgr
* dsp
* enum
* extconfig (config.c)
* features
* http
* indications
* logger
* manager
* plc
* sounds
* udptl
These modules are now loaded at appropriate time by the module loader.
Unlike loadable modules these use AST_MODULE_LOAD_FAILURE on error so
the module loader will abort startup on failure of these modules.
Some of these modules are still initialized or shutdown from outside the
module loader. logger.c is initialized very early and shutdown very
late, manager.c is initialized by the module loader but is shutdown by
the Asterisk core (too much uses it without holding references).
Change-Id: I371a9a45064f20026c492623ea8062d02a1ab97f
Setting channel variables with the AMI Originate action caused a deadlock
when you set CDR(amaflags) or CDR(accountcode). This path has the channel
locked when the CDR function is called. The CDR function then
synchronously passes the job to a stasis thread. The stasis handling
function then attempts to lock the channel. Deadlock results.
* Avoid deadlock by making the CDR function handle setting amaflags and
accountcode directly on the channel rather than passing it off to the CDR
processing code under a stasis thread to do it.
* Made the CHANNEL function and the CDR function process amaflags the same
way.
* Fixed referencing the wrong message type in cdr_prop_write().
ASTERISK-27460
Change-Id: I5eacb47586bc0b8f8ff76a19bd92d1dc38b75e8f
A regression was introduced in 12 where passing an empty value
to the CDR dialplan function was not longer allowed. This
change returns to the behavior of 11 where it is permitted.
ASTERISK-26173
Change-Id: I3f148203b54ec088007e29e30005a5de122e51c5
In all non-pbx modules, AST_MODULE_LOAD_FAILURE has been changed
to AST_MODULE_LOAD_DECLINE. This prevents asterisk from exiting
if a module can't be loaded. If the user wishes to retain the
FAILURE behavior for a specific module, they can use the "require"
or "preload-require" keyword in modules.conf.
A new API was added to logger: ast_is_logger_initialized(). This
allows asterisk.c/check_init() to print to the error log once the
logger subsystem is ready instead of just to stdout. If something
does fail before the logger is initialized, we now print to stderr
instead of stdout.
Change-Id: I5f4b50623d9b5a6cb7c5624a8c5c1274c13b2b25
ASTERISK_REGISTER_FILE no longer has any purpose so this commit removes
all traces of it.
Previously exported symbols removed:
* __ast_register_file
* __ast_unregister_file
* ast_complete_source_filename
This also removes the mtx_prof static variable that was declared when
MTX_PROFILE was enabled. This variable was only used in lock.c so it
is now initialized in that file only.
ASTERISK-26480 #close
Change-Id: I1074af07d71f9e159c48ef36631aa432c86f9966
In a timeval, tv_usec is defined as a suseconds_t, which could be
different underlying types on different platforms. Instead of trying to
scanf directly into the timeval, scanf into a long int, then copy that
into the timeval.
Change-Id: I29f22d049d3f7746b6c0cc23fbf4293bdaa5eb95
When CDRs were refactored, func_cdr's ability to report high precision values
for duration and billsec (the 'f' option) was broken. This was due to func_cdr
incorrectly interpreting the duration/billsec values provided by the CDR engine
in milliseconds, as opposed to seconds. Since the CDR engine only provides
duration and billsec in seconds, and does not expose either attribute with
sufficient precision to merely pass back the underlying value, this patch fixes
the bug by re-calculating duration and billsec with microsecond precision based
on the start/answer/end times on the CDR.
ASTERISK-25179 #close
Change-Id: I8bc63822b496537a5bf80baf6102c06206bee841
* In sip.conf.sample fix sentence where we said that WS or WSS are supported
transports for use in an outbound register definition. They are not
supported in that case.
* In func_cdr.c made it clear that the Disable option for CDR_PROP can be used
to enable CDR on a channel.
ASTERISK-24867 #close
Reported by: Rusty Newton
ASTERISK-24853 #close
Reported by: PSDK
Change-Id: I3d698bc6302b9d00a0a995b5c4ad9a42d69b48ca
Git does not support the ability to replace a token with a version
string during check-in. While it does have support for replacing a
token on clone, this is somewhat sub-optimal: the token is replaced
with the object hash, which is not particularly easy for human
consumption. What's more, in practice, the source file version was often
not terribly useful. Generally, when triaging bugs, the overall version
of Asterisk is far more useful than an individual SVN version of a file. As a
result, this patch removes Asterisk's support for showing source file
versions.
Specifically, it does the following:
* Rename ASTERISK_FILE_VERSION macro to ASTERISK_REGISTER_FILE, and
remove passing the version in with the macro. Other facilities
than 'core show file version' make use of the file names, such as
setting a debug level only on a specific file. As such, the act of
registering source files with the Asterisk core still has use. The
macro rename now reflects the new macro purpose.
* main/asterisk:
- Refactor the file_version structure to reflect that it no longer
tracks a version field.
- Remove the "core show file version" CLI command. Without the file
version, it is no longer useful.
- Remove the ast_file_version_find function. The file version is no
longer tracked.
- Rename ast_register_file_version/ast_unregister_file_version to
ast_register_file/ast_unregister_file, respectively.
* main/manager: Remove value from the Version key of the ModuleCheck
Action. The actual key itself has not been removed, as doing so would
absolutely constitute a backwards incompatible change. However, since
the file version is no longer tracked, there is no need to attempt to
include it in the Version key.
* UPGRADE: Add notes for:
- Modification to the ModuleCheck AMI Action
- Removal of the "core show file version" CLI command
Change-Id: I6cf0ff280e1668bf4957dc21f32a5ff43444a40e
This introduces stasis.conf and a mechanism to prevent certain message
types from being published. Internally, this works by preventing the
chosen message types from being created which ensures that those
message types can never be published. This patch also adjusts message
publishers such that message payloads are not created if the related
message type is not available.
ASTERISK-23943 #close
Review: https://reviewboard.asterisk.org/r/3823/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@420124 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When extracting timestamps that are parsed, time stamp values that are not set
(time values of 0.000000) should not actually result in a parsed string. The
value should be skipped, and the result of the CDR function should be an
empty string.
Prior to this patch, the result was fed to the time formatting, which would
result in an output of a date/time in 1969.
........
Merged revisions 407747 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407748 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In https://reviewboard.asterisk.org/r/3057/, applications and functions that
manipulate CDRs were made to interact over Stasis. This was done to
synchronize manipulations of CDRs from the dialplan with the updates the
engine itself receives over the message bus.
This change rested on a faulty premise: that messages published to the CDR
topic or to a topic that forwards to the CDR topic are synchronized with the
messages handled by the CDR topic subscription in the CDR engine. This is not
the case. There is no ordering guaranteed for two messages published to the
same topic; ordering is only guaranteed if a message is published to the same
subscriber.
Stasis was modified in r405311 to allow a publisher to synchronize on the
subscriber. This patch uses that API to synchronize the CDR publishers with
the CDR engine message router, which maintains the overall topic subscription.
(closes issue ASTERISK-22884)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3099/
........
Merged revisions 405312 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405314 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When doing the rework of the CDR engine that pushed all of the logic into cdr.c
and made it respond to changes in channel state over Stasis, we knew that
accessing the CDR engine from the dialplan would be "slightly"
non-deterministic. Dialplan threads would be accessing CDRs while Stasis
threads would be updating the state of said CDRs - whereas in the past,
everything happened on the dialplan threads. Tests have shown that "slightly"
is in reality "very".
This patch synchronizes things by making the dialplan applications/functions
that manipulate CDRs do so over Stasis. ForkCDR, NoCDR, ResetCDR, CDR, and
CDR_PROP now all use Stasis to send their requests over to the CDR engine,
and synchronize on the channel Stasis topic via a subscription so that they
return their values/control to the dialplan at the appropriate time.
While going through this, the following changes were also made:
* DISA, which can reset the CDR when a user successfully authenticates, now
just uses the ResetCDR app to do this. This prevents having to duplicate
the same Stasis synchronization logic in that application.
* Answer no longer disables CDRs. It actually didn't work anyway - calling
DISABLE on the channel's CDR doesn't stop the CDR from getting the Answer
time - it just kills all CDRs on that channel, which isn't what the caller
would intend.
(closes issue ASTERISK-22884)
(closes issue ASTERISK-22886)
Review: https://reviewboard.asterisk.org/r/3057/
........
Merged revisions 404294 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404295 65c4cc65-6c06-0410-ace0-fbb531ad65f3
I can only blame this on a bad merge, because this in no way worked properly
the way it was written. Mea culpa. The function should now parse its arguments
correctly and function properly. (Note that the API used by the CDR_PROP
function has working unit tests... this was merely bad coding of the actual
registered function)
(closes issue ASTERISK-22613)
Reported by: Private Name
........
Merged revisions 400196 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400197 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Made ast_strftime_locale() ensure that the output buffer is initialized.
The std library strftime() returns 0 and does not touch the buffer if it
has an error. However, the function can also return 0 without an error.
(closes issue ASTERISK-22412)
Reported by: rmudgett
........
Merged revisions 397902 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397903 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When func_cdr is used for variable substitution, there is no channel name
and hence no run-time information available for CDR variable substitution.
In that case, the correct thing to do is to use the CDR object on the channel
passed to the function. This patch checks to see if the channel passed in
has a name - if not, it uses ast_cdr_format_var instead of ast_cdr_get_var.
This allows CDR backends to continue to use variable substitution in order to
resolve ast_cdr object properties.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392214 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The type of tv_usec is suseconds_t. On Linux, this is usually a long int, but
the specification is actually pretty lax on what it might actually be. And,
sadly, there's no printf/scanf width specifier for suseconds_t. So it could
bit an int or a long, but there's not a great way to tell which it is.
This patch fixes scanf by reading into a long temporary variable that's then
stored into the tv_usec. It fixes printf by casting the tv_usec to a long
first.
This patch also adds some missing width specifiers for some debug statements,
which would cause ".000001" to be displayed at ".1".
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392076 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is the initial push to update Asterisk's CDR engine for the new
bridging framework. This patch guts the existing CDR engine and builds the new
on top of messages coming across Stasis. As changes in channel state and bridge
state are detected, CDRs are built and dispatched accordingly. This
fundamentally changes CDRs in a few ways.
(1) CDRs are now *very* reflective of the actual state of channels and bridges.
This means CDRs track well with what an actual channel is doing - which
is useful in transfer scenarios (which were previously difficult to pin
down). It does, however, mean that CDRs cannot be 'fooled'. Previous
behavior in Asterisk allowed for CDR applications, channels, and other
properties to be spoofed in parts of the code - this no longer works.
(2) CDRs have defined behavior in multi-party scenarios. This behavior will not
be what everyone wants, but it is a defined behavior and as such, it is
predictable.
(3) The CDR manipulation functions and applications have been overhauled. Major
changes have been made to ResetCDR and ForkCDR in particular. Many of the
options for these two applications no longer made any sense with the new
framework and the (slightly) more immutable nature of CDRs.
There are a plethora of other changes. For a full description of CDR behavior,
see the CDR specification on the Asterisk wiki.
(closes issue ASTERISK-21196)
Review: https://reviewboard.asterisk.org/r/2486/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391947 65c4cc65-6c06-0410-ace0-fbb531ad65f3
People expressed an interest in having access to the exact length of calls to a finer degree than seconds. See the CHANGES and UPGRADE.txt for usage also updated the sample configs to note the change.
Patch by snuffy.
(closes issue #16559)
Reported by: cianmaher
Tested by: cianmaher, snuffy
Review: https://reviewboard.asterisk.org/r/461/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@269153 65c4cc65-6c06-0410-ace0-fbb531ad65f3
CEL is the new system for logging channel events. This was inspired after
facing many problems trying to represent what is possible to happen to a call
in Asterisk using CDR records. For more information on CEL, see the built in
HTML or PDF documentation generated from the files in doc/tex/.
Many thanks to Steve Murphy (murf) and Brian Degenhardt (bmd) for their hard
work developing this code. Also, thanks to Matt Nicholson (mnicholson) and
Sean Bright (seanbright) for their assistance in the final push to get this
code ready for Asterisk trunk.
Review: https://reviewboard.asterisk.org/r/239/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@203638 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit introduces the first phase of an effort to manage documentation of the
interfaces in Asterisk in an XML format. Currently, a new format is available for
applications and dialplan functions. A good number of conversions to the new format
are also included.
For more information, see the following message to asterisk-dev:
http://lists.digium.com/pipermail/asterisk-dev/2008-October/034968.html
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@153365 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r146799 | tilghman | 2008-10-06 15:52:04 -0500 (Mon, 06 Oct 2008) | 8 lines
Dialplan functions should not actually return 0, unless they have modified the
workspace. To signal an error (and no change to the workspace), -1 should be
returned instead.
(closes issue #13340)
Reported by: kryptolus
Patches:
20080827__bug13340__2.diff.txt uploaded by Corydon76 (license 14)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@146802 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r122046 | murf | 2008-06-12 07:47:34 -0600 (Thu, 12 Jun 2008) | 37 lines
(closes issue #10668)
Reported by: arkadia
Tested by: murf, arkadia
Options added to forkCDR() app and the CDR() func to
remove some roadblocks for CDR applications.
The "show application ForkCDR" output was upgraded
to more fully explain the inner workings of forkCDR.
The A option was added to forkCDR to force the
CDR system to NOT change the disposition on the
original CDR, after the fork. This involves
ast_cdr_answer, _busy, _failed, and so on.
The T option was added to forkCDR to force
obedience of the cdr LOCKED flag in the
ast_cdr_end, all the disposition changing
funcs (ast_cdr_answer, etc), and in the
ast_cdr_setvar func.
The CHANGES file was updated to explain ALL
the new options added to satisfy this bug report
(and some requests made verbally and via
email, irc, etc, over the past months/year)
The 's' option was added to the CDR() func,
to force it to skip LOCKED cdr's in the
chain.
Again, the new options should be totally transparent
to existing apps! Current behavior of CDR,
forkCDR, and the rest of the CDR system should
not change one little bit. Until you add the
new options, at least!
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@122091 65c4cc65-6c06-0410-ace0-fbb531ad65f3
build times - tested, there is no measureable difference before and
after this commit.
In this change:
use asterisk/compat.h to include a small set of system headers:
inttypes.h, unistd.h, stddef.h, stddint.h, sys/types.h, stdarg.h,
stdlib.h, alloca.h, stdio.h
Where available, the inclusion is conditional on HAVE_FOO_H as determined
by autoconf.
Normally, source files should not include any of the above system headers,
and instead use either "asterisk.h" or "asterisk/compat.h" which does it
better.
For the time being I have left alone second-level directories
(main/db1-ast, etc.).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89333 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r61681 | tilghman | 2007-04-18 21:45:05 -0500 (Wed, 18 Apr 2007) | 13 lines
Merged revisions 61680 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r61680 | tilghman | 2007-04-18 21:30:18 -0500 (Wed, 18 Apr 2007) | 5 lines
Bug 9557 - Specifying the GetVar AMI action without a Channel parameter can
cause Asterisk to crash. The reason this needs to be fixed in the functions
instead of in AMI is because Channel can legitimately be NULL, such as when
retrieving global variables.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@61682 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Corey Farrell
Richard Mudgett
Jacek Konieczny
Joshua Colp
George Joseph
David M. Lee
Matt Jordan
Rusty Newton
Kinsey Moore
David M. Lee
Jonathan Rose
Terry Wilson
Leif Madsen
Bradley Latus
Tilghman Lesher
Mark Michelson
Matthew Nicholson
Russell Bryant
Kevin P. Fleming
Steve Murphy
Jason Parker
Luigi Rizzo
Olle Johansson