Consider reviewing the expression of the 'A = B != C' kind.
The expression is calculated as following: 'A = (B != C)'
Change-Id: Ibaa637dfda47d51a20e26069d3103e05ce80003d
When an opus offer or answer was received that contained an
fmtp line with spaces between the attributes the module would
fail to properly parse it and crash due to recursion.
This change makes the module handle the space properly and
also removes the recursion requirement.
ASTERISK-26579
Change-Id: I01f53e5d9fa9f1925a7365f8d25071b5b3ac2dc3
The PJSIPShowRegistrationsInbound AMI command was just dumping out
all AORs which was pretty useless and resource heavy since it had
to get all endpoints, then all aors for each endpoint, then all
contacts for each aor.
PJSIPShowRegistrationInboundContactStatuses sends ContactStatusDetail
events which meets the intended purpose of the other command and has
significantly less overhead. Also, some additional fields that were
added to Contact since the original creation of the ContactStatusDetail
event have been added to the end of the event.
For compatibility purposes, PJSIPShowRegistrationsInbound is left
intact.
ASTERISK-26644 #close
Change-Id: I326f12c9ecb52bf37ba03f0748749de4da01490a
Increasing the testsuite shutdown timeout before forcibly killing
Asterisk allowed more events to be sent out. Some tests failed as
a result. The tests/channels/pjsip/statsd/registrations failed
because we now get the statsd events that a comment in the test
configuration stated couldn't be intercepted. Unfortunately, we
get a variable number of events because of internal status state
transition races generating redundant statsd events.
We were reporting redundant statsd PJSIP.registrations.state changes
for internal state changes that equated to the same thing publicly.
* Made update_client_state_status() filter out redundant statsd
updates.
ASTERISK-26527
Change-Id: If851c7d514bb530d9226e4941ba97dcf52000646
The latest Release candidate fails to create RTP streams when IPv6
is not available. Due to the changes made in September the ast_sockaddr
structure passed around to create these streams is always of AF_INET6
type, causing failure when used for IPv4. This patch adds a utility
function to check for availability of IPv6 and applies such check
at startup to determine how to create the ast_sockaddr structures.
ASTERISK-26617 #close
Change-Id: I627a4e91795e821111e1cda523f083a40d0e0c3e
Use of the new logging is as simple as issuing the new CLI command or
setting the new pjproject.conf option.
Other options that can affect the logging are how you have the pjproject
log levels mapped to Asterisk log types in pjproject.conf and if you have
configured Asterisk to log the DEBUG type messages. Altering the
pjproject.conf level mapping shouldn't be necessary for most installations
as the default mapping is sensible. Configuring Asterisk to log the DEBUG
message type is standard practice for collecting debug information.
* Added CLI "pjproject set log level" command to dynamically adjust the
maximum pjproject log message level.
* Added CLI "pjproject show log level" command to see the currently set
maximum pjproject log message level.
* Added pjproject.conf startup section "log_level" option to set the
initial maximum pjproject log message level so all messages could be
captured from initialization.
* Set PJ_LOG_MAX_LEVEL to 6 to compile in all defined logging levels into
bundled pjproject. Pjproject will use the currently set run time log
level to determine if a log message is generated just like Asterisk
verbose and debug logging levels.
* In log_forwarder(), made always log enabled and mapped pjproject log
messages. DEBUG mapped log messages are no longer gated by the current
Asterisk debug logging level.
* Removed RAII_VAR() from res_pjproject.c:get_log_level().
ASTERISK-26630 #close
Change-Id: I6dca12979f482ffb0450aaf58db0fe0f6d2e5389
The response from gmail calendar includes the string name
"caldav:calendar-data". res_calendar_caldav implements
the example included in RFC 4791: string "C:calendar-data".
When reading the calendar, res_calendar_caldav compare the
string and if does not match just discards the event.
This commit compares the response to both strings,
successfully loading gmail calendar events.
Writing to gmail calendar is working prior to this fix.
ASTERISK-26624
Reported by: Eduardo S. Libardi
Change-Id: Ia1eef10552ae616efb645d390f5ffe81260d7d4a
Per RFC 7118 5.2, the SIP URI 'transport' parameter should advertise
'ws' when WebSockets are to be used as the transport. This applies to
both secure and insecure WebSockets.
There were two bugs in Asterisk with respect to this:
(1) The most egregious occurs in res_pjsip. There, we advertise 'ws' for
insecure websockets and 'wss' for secure websockets. While this
would seem to make sense - since 'WS' and 'WSS' are used for the Via
Transport parameter - this is not the case for the SIP URI. This
patch corrects that by registering the secure websockets with
pjproject using the shorthand 'WS', and by returning 'ws' when asked
for the transport parameter. Note that in pjproject, it is perfectly
valid to have multiple transports use the same shorthand.
(2) In chan_sip, we return an upper-case version of the transport 'WS'
instead of 'ws'. Since we should be strict in what we send and
liberal in what we accept (within reason), this patch lower-cases
the transport before appending it to the parameter.
ASTERISK-24330 #close
Reported by: cervajs, Inaki Baz Castillo
Change-Id: Iff77b645f8cc3b7cd35168a6676c26b147f22f42
When retrieving RTCP stats for PJSIP channels, RTT values are unreliable.
RTT calculation is correct, but the data representation isn't. RTT is
represented by a 32-bit fixed-point number with the integer part in the
first 16 bits and the fractional part in the last 16 bits. In order to
get the RTT value, the fractional part is miscalculated, there is an
unnecessary 16 bit shift that causes overflow. Besides this there is
another mistake, when transforming the integer value to the fixed point
fractional part via bitwise operation, that loses precision.
* RTT fractional part is no longer shifted, avoiding overflow.
* RTT fractional part is transformed to its fixed-point value more
precisely.
* Fixed timeval2ntp() and ntp2timeval() second fraction conversions.
* Fixed NTP timestamp report logging. The usec was inexplicably
multiplied by 4096.
ASTERISK-26566 #close
Reported by Hector Royo Concepcion
Change-Id: Ie09bdabfee75afb3f1b8ddfd963e5219ada3b96f
Fix support of OS's like openBSD that use an older nameser.h,
this change reverts the defines to the older style which on other
systems is found in nameser_compat.h
Tested on openBSD 6.0, Debian 8
ASTERISK-26608 #close
Change-Id: Iffb36caab8c5aa9dece0ce2d009041f7b56cc86a
OpenBSD's 'find' doesn't take the -delete argument so you have to pipe
through 'xargs rm -rf'.
'echo -e' doesn't like \t starting a line. It just prints 't' which
causes the libasteriskpj.exports file to be garbage. They were just
cosmetic so they were removed.
librt doesn't exist so the link of libasteriskpj.so fails. It's not
actually needed for linux anyway so -lrt was removed from the link.
res_rtp_asterisk was failing to load because of an undefined
DTLS_method. '|| defined(LIBRESSL_VERSION_NUMBER)' was added to the #if
so DTLSv1_method is used instead.
ASTERISK-26608
Change-Id: I926ec95b0b69633231e3ad1d6e803b977272c49c
res_format_attr_opus assumed that the string being passed into it was
empty. It tried to determine if the only thing it had written was
a=fmtp:<num>
And if it had, it would reset the string. Its calculation was off when
working with chan_sip, though. chan_sip passes the entire built SDP
rather than an empty string. This resulted in always putting an empty
fmtp line in the SDP.
ASTERISK-26520 #close
Reported by scgm11
Change-Id: Ib2e8712d26a47067e5f36d5973577added01dbb5
Responding to authentication challenges leaks PJSIP memory pools.
The leak was introduced with a pjproject 2.5.5 API change.
https://trac.pjsip.org/repos/ticket/1929 changed the API usage of
pjsip_auth_clt_init() to require the new API pjsip_auth_clt_deinit() to
clean up cached authentication allocations that get allocated with
pjsip_auth_clt_reinit_req().
ASTERISK-26516 #close
Change-Id: I4473141b8c3961d0dc91c382beb3876b3efb45c8
fopencookie/funclose is a non-standard API and should not be used
in portable software. Additionally, the way FILE's fd is used in
non-blocking mode is undefined behaviour and cannot be relied on.
This introduces internal abstraction for io streams, that allows
implementing the desired virtualization of read/write operations
with necessary timeout handling.
ASTERISK-24515 #close
ASTERISK-24517 #close
Change-Id: Id916aef418b665ced6a7489aef74908b6e376e85
In multi-party bridges, Asterisk currently supports two video modes:
* Follow the talker, in which the speaker with the most energy is shown
to all participants but the speaker, and the speaker sees the
previous video source
* Explicitly set video sources, in which all participants see a locked
video source
Prior to this patch, ARI had no ability to manipulate the video source.
This isn't important for two-party bridges, in which Asterisk merely
relays the video between the participants. However, in a multi-party
bridge, it can be advantageous to allow an external application to
manipulate the video source.
This patch provides two new routes to accomplish this:
(1) setVideoSource: POST /bridges/{bridgeId}/videoSource/{channelId}
Sets a video source to an explicit channel
(2) clearVideoSource: DELETE /bridges/{bridgeId}/videoSource
Removes any explicit video source, and sets the video mode to talk
detection
ASTERISK-26595 #close
Change-Id: I98e455d5bffc08ea5e8d6b84ccaf063c714e6621
This works the same as for AMI manager variables. Set
"channelvars=foo,bar" in your ari.conf general section, and then the
channel variables "foo" and "bar" (along with their values), will
appear in every Stasis websocket channel event.
ASTERISK-26492 #close
patches:
ari_vars.diff submitted by Mark Michelson
Change-Id: I5609ba239259577c0948645df776d7f3bc864229
When optimistic SRTP was on it was possible for us to still
set up a call without an audio stream if an offer was received
with required SRTP.
This change makes it so this scenario will now fail with a 488
response.
ASTERISK-26575
Change-Id: I7d14187037681f48879bd20319ac79d0877318f3
* Don't hold the req_wrapper lock too long in endpt_send_request(). We
could block the PJSIP monitor thread if the timeout timer expires.
sip_get_tpselector_from_endpoint() does a sorcery access that could take
awhile accessing a database. pjsip_endpt_send_request() might take awhile
if selecting a transport.
* Shorten the time that the req_wrapper lock is held in the callback
functions.
* Simplify endpt_send_request() req_wrapper->timeout code.
* Removed some redundant req_wrapper->timeout_timer->id assignments.
Change-Id: I3195e3a8e0207bb8e7f49060ad2742cf21a6e4c9
This change fixes the SIP resolver such that if an IPv6 transport
is explicitly used it will resolve NAPTR, SRV, and AAAA records.
You can explicitly use one by specifying it on an endpoint.
ASTERISK-26571
Change-Id: I2ed3ce81b43a6a8a937c0ebc1b8ed2da5ac2ef36
res_pjsip_sesssion was hooking into transaction and invite state
changes. One of the reasons for doing so was due to the
PJSIP_EVENT_TX_MSG event. The idea was that we were hooking into the
message sending process, and so we should call session supplements to
alter the outgoing message.
In reality, this event was meant to indicate that the message either
a) had already been sent, or
b) required a DNS lookup and would be sent when the DNS query
completed.
In case (a), this meant we were altering an already-sent
request/response for no reason. In case (b), this potentially meant we
could be trying to alter a request/response at the same time that the
DNS resolution completed. In this case, it meant we might be stomping on
memory being used by the thread actually sending the message. This
caused potential crashes and memory corruption.
This patch removes the calls to session supplements from the case where
the PJSIP_EVENT_TX_MSG event occurs. In all of these cases, trying to
alter the message at this point is too late, and it can cause nothing
but harm to try to do it. Because there were no longer any calls to the
handle_outgoing() function, it has been removed.
Change-Id: Ibcc223fb1c3a237927f38754e0429e80ee301e92
AGI recently was modified to defer important frames. This was because
when AGI was used in a connected line interception routine, the
resulting connected line frame would end up getting discarded by the
AGI.
However, this caused bad behavior in other cases. Specifically, during a
transfer, if someone attempted to manually set the Caller ID on a
channel in an AGI, the deferred connected line frame would end up
overwriting what had been manually set in the AGI.
Since the initial issue was specific to interception routines, this
change removes the manual frame deferral from AGI and instead uses the
new frame deferral API in interception routines.
ASTERISK-26343 #close
Reported by Morton Tryfoss
Change-Id: Iab7d39436d0ee99bfe32ad55ef91e9bd88db4208
A NULL bridge has special meaning in res_stasis for
unsubscribing. It means that a subscription to ALL
bridges should be removed. This should not be done
as part of the normal subscription management in
the res_stasis channel loop.
ASTERISK-26468
Change-Id: I6d5bea8246dd13a22ef86b736aefbf2a39c15af0
Adds an identifier (with a getter and setter) to detect channels with
interleaved audio.
This is needed by the binaural bridge_softmix patch (ASTERISK-26292) and
was already discussed here:
http://lists.digium.com/pipermail/asterisk-dev/2016-October/075900.html
The identifier can be set during fmtp parsing (to be seen in the
res_format_attr_opus.c change).
ASTERISK-26292
Change-Id: I359801cc5f98c35671c48dabc81a7f4ee1183d63
Not surprisingly, using Respoke (and possibly other systems) it is
possible to blow past the 16k limit for a WebSocket packet size. This
patch bumps it up to 32k, which, at least for Respoke, is sufficient.
For now.
Because 32k is laughable on a LOW_MEMORY system (as is 16k, for that
matter), this patch adds a LOW_MEMORY directive that sets the buffer to
8k for systems who have asked for their reduced memory availability to
be considered.
Change-Id: Id235902537091b58608196844dc4b045e383cd2e
When a bridge is created via ARI (through res_stasis), no video source
mode is set by default. As a result, any endpoint sending video media
won't ever see any video reflected back to it.
This patch defaults a bridge to a 'follow the talker' video mode.
Further work can be done to add routes that allow for the video mode to
be controlled through the /bridges resource.
Change-Id: I7e9d530a5d7a97a4524a9ee4e468e1a6b3443866
The readdir_r function has been deprecated and should no longer be used. This
patch removes the readdir_r dependency (replaced it with readdir) and also moves
the directory search code to a more centralized spot (file.c)
Also removed a strict dependency on the dirent structure's d_type field as it
is not portable. The code now checks to see if the value is available. If so,
it tries to use it, but defaults back to using the stats function if necessary.
Lastly, for most implementations of readdir it *should* be thread-safe to make
concurrent calls to it as long as different directory streams are specified.
glibc falls into this category. However, since it is possible that there exist
some implementations that are not safe, locking has been added for those other
than glibc.
ASTERISK-26412
ASTERISK-26509 #close
Change-Id: Id8f54689b1e2873e82a09d0d0d2faf41964e80ba
The res_pjsip_sdp_rtp module did not restrict the number of
formats added to a media stream in the SDP to the defined
limit. If allow=all was used with additional loaded codecs this
could result in the next media stream being overwritten some.
This change restricts the module to limit it to the defined
maximum and also increases the maximum in our bundled pjproject.
ASTERISK-26541 #close
Change-Id: I0dc5f59d3891246cafa2f3df5ec406f088559ee8
This patch adds three new CLI commands:
- ari show apps: list the registered ARI applications
- ari show app: show detailed information about an ARI application
- ari set debug: dump events being sent to an ARI application
Note that while these CLI commands live in the res_stasis module, we use
the 'ari' family for these commands. This was done as most users of
Asterisk aren't aware of the semantic differences between ARI and
res_stasis, and some 'ari' CLI commands already exist.
ASTERISK-26488 #close
Change-Id: I51ad6ff0cabee0d69db06858c13f18b1c513c9f5
While publishing device state between multiple instances of Asterisk,
a crash will sporadically occur under high CPS which looks to be a
race condition operating on the publisher queue.
ASTERISK-26506
Change-Id: I28da25d346deb358eff1d563485cabc433ce1ed6
ASTERISK_REGISTER_FILE no longer has any purpose so this commit removes
all traces of it.
Previously exported symbols removed:
* __ast_register_file
* __ast_unregister_file
* ast_complete_source_filename
This also removes the mtx_prof static variable that was declared when
MTX_PROFILE was enabled. This variable was only used in lock.c so it
is now initialized in that file only.
ASTERISK-26480 #close
Change-Id: I1074af07d71f9e159c48ef36631aa432c86f9966
The res_pjsip_caller_id module wrongly assumed that a
saved From header would always exist on sessions. This
is true until an inbound call is received and a session
timer causes an UPDATE to be sent. In this case there will
be no saved From header and a crash will occur. This change
makes it fall back to the From header of the outgoing request
if no saved From header is present.
ASTERISK-26307 #close
Change-Id: Iccc3bc8d243b5ede9b81abf960292930c908d4fa
When channel format changes occurred as a result of an RTP
re-negotiation the bridge was not informed this had happened.
As a result the bridge technology was not re-evaluated and the
channel may have been in a bridge technology that was incompatible
with its formats. The bridge is now unbridged and the technology
re-evaluated when this occurs.
The chan_pjsip module also allowed asymmetric codecs for sending
and receiving. This did not work with all devices and caused one
way audio problems. The default has been changed to NOT do this
but to match the sending codec to the receiving codec. For users
who want asymmetric codecs an option has been added, asymmetric_rtp_codec,
which will return chan_pjsip to the previous behavior.
The codecs returned by the chan_pjsip module when queried by
the bridge_native_rtp module were also not reflective of the
actual negotiated codecs. The nativeformats are now returned as
they reflect the actual negotiated codecs.
ASTERISK-26423 #close
Change-Id: I6ec88c6e3912f52c334f1a26983ccb8f267020dc
When an explicit media_address is provided the address family
in the SDP needs to be set to reflect it.
ASTERISK-26309
Change-Id: Ib9350cc91c120eb2f96f0623d3907d12af67eb79
This change adds support for dual stack automatically. No
configuration is required and the IP address and version
in the SIP messages and SDP will be automatically changed
based on the transport over which the message is being
sent. RTP usage has also been changed to listen on both
IPv4 and IPv6 simultaneously to allow media to flow, and
to allow ICE support on both simultaneously. This also
allows failover between IPv6 and IPv4 to work as expected.
ASTERISK-26309 #close
Change-Id: I235a421d8f9a326606d861b449fa6fe3a030572d
This is similar to what is done for origination, but for the 14 and up
channel creation method. When attempting to create a channel, if a
channel ID is specified and a channel already exists with that ID, then
a 409 is returned.
Change-Id: I77f9253278c6947939c418073b6b31065489187c
ARI and AMI allow for an explicit channel ID to be specified
when originating channels. Unfortunately, there is nothing in
place to prevent someone from using the same ID for multiple
channels. Further complicating things, adding ID validation to channel
allocation makes it impossible for ARI to discern why channel allocation
failed, resulting in a vague error code being returned.
The fix for this is to institute a new method for channel errors to be
discerned. The method mirrors errno, in that when an error occurs, the
caller can consult the channel errno value to determine what the error
was. This initial iteration of the feature only introduces "unknown" and
"channel ID exists" errors. However, it's possible to add more errors as
needed.
ARI uses this feature to determine why channel allocation failed and can
return a 409 error during origination to show that a channel with the
given ID already exists.
ASTERISK-26421
Change-Id: Ibba7ae68842dab6df0c2e9c45559208bc89d3d06
Introduces ice_blacklist configuration in rtp.conf. Subnets listed in the
form ice_blacklist = <subnet spec>, e.g. ice_blacklist =
192.168.1.0/255.255.255.0, are excluded from ICE host, srflx and relay
discovery. This is useful for optimizing the ICE process where a system
has multiple host address ranges and/or physical interfaces and certain
of them are not expected to be used for RTP. Multiple ice_blacklist
configuration lines may be used. If left unconfigured, all discovered
host addresses are used, as per previous behavior.
Documention in rtp.conf.sample.
ASTERISK-26418 #close
Change-Id: Ibee88f80d7693874fda1cceaef94a03bd86012c9
This patch adds the Asterisk EID field to all outgoing ARI events.
Because this field should be added to all events as they are
transmitted, it is appended to the JSON message just prior to it being
handed off to the application message handler. This makes it somewhat
resilient to both new events being added to ARI, as well as other
potential event transport mechanisms.
ASTERISK-26470 #close
Change-Id: Ieff0ecc24464e83f3f44e9c3e7bd9a5d70b87a1d
Added needed UTF-8 checks before constructing json objects in various
files for strings obtained outside the system. In this case string values
from a channel driver's peer and not from the user setting channel
variables.
* aoc.c: Fixed type mismatch in s_to_json() for time and granularity json
object construction.
ASTERISK-26466
Reported by: Richard Mudgett
Change-Id: Iac2d867fa598daba5c5dbc619b5464625a7f2096
When T.38 gets rejected and G711 failback occurs there is a period of
time where neither AST_FAX_TECH_T38 nor AST_FAX_TECH_AUDIO is set,
leading to a crash.
Change-Id: Icc3f457b2292d48a9d7843dac0028347420cc982
If a bridge switched to P2P when a DTMF was in progress it
was possible for the DTMF to continue being sent indefinitely.
Change-Id: I7e2a3efe0d59d4b214ed50cd0b5d0317e2d92e29
Fixed a memory leak. It removes only the first element.
Added a useful feature in vector.h to remove all items
under the CMP through a callback function / macro.
ASTERISK-26453 #close
Change-Id: I84508353463456d2495678f125738e20052da950
We use a lot res_calendar, we are very happy with that, especially
because you use libical, the almost alone opensource library that
supports really ical format with all types of recurrency.
Nevertheless, some features are missed for our business use cases.
This first patch adds a new option in calendar.conf:
fetch_again_at_reload. Be my guest for a better name.
If it's true, when you'll launch "module reload res_calendar.so",
Asterisk will download again the calendar.
The business use case is that we have a WebUI with a scheduler planner,
we know when the calendars are modified.
For now, we need to define 1 minute of timeout to have a chance that
our user doesn't wait too long between the modification and the real
test. But it generates a lot of useless HTTP traffic.
ASTERISK-26422 #close
Change-Id: I384b02ebfa42b142bbbd5b7221458c7f4dee7077
Some external packages have multiple variants that apply to different
builds of asterisk. The DPMA for instance has a "bundled" variant that
needs to be downloaded if asterisk was configured with
--with-pjproject-bundled.
There are 2 ways to specify variants:
If you need the user to make the decision about which variant to
download, simply create multiple menuselect "member" entries like so...
<member name="res_digium_phone" displayname="..snipped..">
<support_level>external</support_level>
<depend>xmlstarlet</depend>
<depend>bash</depend>
<defaultenabled>no</defaultenabled>
</member>
<member name="res_digium_phone-bundled" displayname="..snipped..">
<support_level>external</support_level>
<depend>xmlstarlet</depend>
<depend>bash</depend>
<defaultenabled>no</defaultenabled>
</member>
Note that the second entry has "-<variant>" appended to the name.
You can then use the existing menuselect facilities to restrict which
members to enable or disable. Youy probably don't want the user to
enable multiple at the same time.
If you want to hide the details of the variants, the better way to
do it is to create 1 member with "variant" elements.
<member name="res_digium_phone" displayname="..snipped..">
<support_level>external</support_level>
<depend>xmlstarlet</depend>
<depend>bash</depend>
<defaultenabled>no</defaultenabled>
<member_data>
<downloader>
<variants>
<variant tag="bundled"
condition='[[ "$PJPROJECT_BUNDLED" = "yes" ]]'/>
</variants>
</downloader>
</member_data>
</member>
The condition must be a bash expression suitable for use with an "if"
statement. Any environment variable can be used plus those available
in makeopts.
In this case, if asterisk was configured with --with-pjproject-bundled
the bundled variant will be automatically downloaded. Otherwise the
normal version will be downloaded.
Change-Id: I4de23e06d4492b0a65e105c8369966547d0faa3e
This changes the notice for the deprecation of the old
pooling options to point to the new option for doing
pooling. This gives a clearer direction as to what to
look into.
ASTERISK-26389 #close
Change-Id: I2ca9cdfdcd75aec170a7db9d5ff69a4cd25b7c10
Creating ODBC SQL queries resulted in queries too large to fit into the
supplied buffer. The resulting truncated buffer contained an invalid SQL
query.
* Made SQL query generation code use a thread storage buffer that can
increase in size as needed.
* Fixed bad multi-line warning messages.
ASTERISK-26263 #close
Reported by: Jeppe Ryskov Larsen
Change-Id: I23f3cdd43c2dac80bed3ded4dd77d18cb17f21ae
The res_pjsip_multihomed module determines what interface and transport
a request is going out on and updates the SIP message accordingly with
the address information. This currently incorrectly updates the Contact
header for connectionful protocols to the ephemeral connection port,
instead of the bound address for the listening socket which can actually
accept the connection back. If the remote side attempts to connect back on
the epehemeral port it will fail.
This change makes it so the port is updated to the bound port on
connectionful protocols and is maintained on UDP (as there can be
multiple of those).
ASTERISK-26374 #close
Change-Id: I50f8dab65b9f75117d73ba5f6bbcf6c9871854ab
Currently when receiving video over RTP we store only
a calculated samples on the frame. When starting the video
it can take some time for this calculation to actually yield
a value as it requires constant changing timestamps. As well
if a video frame passes over multiple RTP packets this calculation
will fail as the timestamp is the same as the previous RTP
packet and the number of samples calculated will be 0.
This change preserves the timestamp on the frame and allows
it to pass through the core. When sending the video this timestamp
is used instead of a new one being calculated.
ASTERISK-26367 #close
Change-Id: Iba8179fb5c14c9443aee4baf670d2185da3ecfbd
When performing DNS resolution the failover code present in
res_pjsip currently assumes that a request will always have
at least one viable address. In practice this is not true.
A domain may be used that has no records.
The code now checks that at least one address exists on the
request which prevents looping.
ASTERISK-26364 #close
Change-Id: Ic0761b0264864acd85915c94d878a81624940f4c
This implements the chan_sip legacy_useroption_parsing option but with a
better name.
* Made the caller-id number and redirecting number strings obtained from
incoming SIP URI user fields always truncated at the first semicolon.
People don't care about anything after the semicolon showing up on their
displays even though the RFC allows the semicolon.
ASTERISK-26316 #close
Reported by: Kevin Harwell
Change-Id: Ib42b0e940dd34d84c7b14bc2e90d1ba392624f62
The code was incorrectly invoking the unidentified logic when
an endpoint had actually been identified, causing log messages
to be output.
ASTERISK-26349 #close
Change-Id: Id8104fc9e3d138d5e8b6f6977ecc08765fd17d4f
This patch add config to pjsip by endpoint.
;preferred_codec_only=yes
; Respond to a SIP invite with the single most preferred codec
; rather than advertising all joint codec capabilities. This
; limits the other side's codec choice to exactly what we prefer.
ASTERISK-26317 #close
Reported by: AaronAn
Tested by: AaronAn
Change-Id: Iad04dc55055403bbf5ec050997aee2dadc4f0762
The endpoint identification PJSIP module is intended to identify which
endpoint an incoming request is from. If an endpoint is not identified,
then an artificial endpoint is used in its place when proceeding.
The problem is that the ACK request type is an exception to the rule.
The artificial endpoint is not used when processing an ACK. This results
in the possibility of having a NULL endpoint being used further on.
The reason ACK is an exception is an attempt not to spam security logs
with unidentified requests. Presumably, you've already logged the
unidentified request on the preceeding INVITE.
Up until Asterisk 13.10, retrieving a NULL endpoint in this fashion
didn't cause an issue. A new change in 13.10 added endpoint ACL checking
shortly after endpoint identification. Because we are accessing a NULL
endpoint, this ACL check resulted in a crash.
The fix here is to be sure to retrieve the artificial endpoint for all
request types. ACKs still do not generate unidentified request security
events.
ASTERISK-26264 #close
Reported by nappsoft
AST-2016-006
Change-Id: Ie0c795ae2d72273decb972dd74b6a1489fb6b703
* Eliminated RAII_VAR in get_outbound_endpoint().
* Simplify update_to() coding. However, this function can only be a NoOp
because the To string can only be a URI and not a name-address formatted
string.
* Simplify update_from() coding. Also fixed a code path modifying the
from string when the caller could still want to use the original string.
* Fixed msg_data_create() incompletely removing the "pjsip:" to then add
back the "sip:" string if needed. The code didn't handle the "pjsip:sip:"
case because it left the colon after pjsip in the string.
Change-Id: I68a09a665f6d4daa9eaa59069045ab69122e28db
