This change allows timing implementation data to be stored directly
on the timer itself thus removing the requirement for many
implementations to do a container lookup for the same information.
This means that API calls into timing implementations can directly
access the information they need instead of having to find it.
Review: https://reviewboard.asterisk.org/r/3175/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407749 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Currently, if an acknowledgement of a timer fails Asterisk will not realize
that a serious error occurred and will continue attempting to use the timer's
file descriptor. This can lead to situations where errors stream to the
CLI/log file. This consumes significant resources, masks the actual problem
that occurred (whatever caused the timer to fail in the first place), and
can leave channels in odd states.
This patch propagates the errors in the timing resource modules up through
the timer core, and makes users of these timers handle acknowledgement
failures. It also adds some defensive coding around the use of timers
to prevent using bad file descriptors in off nominal code paths.
Note that the patch created by the issue reporter was modified slightly for
this commit and backported to 1.8, as it was originally written for
Asterisk 10.
Review: https://reviewboard.asterisk.org/r/2178/
(issue ASTERISK-20032)
Reported by: Jeremiah Gowdy
patches:
jgowdy-timerfd-6-22-2012.diff uploaded by Jeremiah Gowdy (license 6358)
........
Merged revisions 375893 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 375894 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 375895 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375896 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this patch, res_musiconhold existed at the same module priority level
as the timing sources that it depends on. This would cause a problem when
music on hold was reloaded, as the timing source could be changed after
res_musiconhold was processed. This patch adds a new module priority level,
AST_MODPRI_TIMING, that the various timing modules are now loaded at. This
now occurs before loading other resource modules, such that the timing source
is guaranteed to be set prior to resolving the timing source dependencies.
(closes issue ASTERISK-17474)
Reporter: Luke H
Tested by: Luke H, Vladimir Mikhelson, zzsurf, Wes Van Tlghem, elguero, Thomas Arimont
Patches:
asterisk-17474-dahdi_timing-infinite-wait-fix_v3_branch-1.8.diff uploaded by elguero (License #5026)
asterisk-17474-dahdi_timing-infinite-wait-fix_v3_branch-10.diff uploaded by elguero (License #5026)
asterisk-17474-dahdi_timing-infinite-wait-fix_v3.diff uploaded by elguero (License #5026)
Review: https://reviewboard.asterisk.org/r/1578/
........
Merged revisions 349194 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 349195 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@349196 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds the option to give a module a load priority. The value represents the order in which a module's load() function is initialized. The lower the value, the higher the priority. The value is only checked if the AST_MODFLAG_LOAD_ORDER flag is set. If the AST_MODFLAG_LOAD_ORDER flag is not set, the value will never be read and the module will be given the lowest possible priority
on load. Since some modules are reliant on a timing interface, the timing modules have been given a high load priorty.
(closes issue #15191)
Reported by: alecdavis
Tested by: dvossel
Review: https://reviewboard.asterisk.org/r/262/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@199743 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This document specifies the timing modules available in Asterisk beginning
with Asterisk 1.6.1. The document goes into detail about the differences
between each and gives a general overview of what timing is used for in
Asterisk. There is also a section which can be used to help customize
your setup or to troubleshoot timing issues you may have.
I also added messages to the DAHDI timing test used in res_timing_dahdi.c
that points to this new documentation if people experience problems.
Big thanks to all who contributed comments on this.
(closes issue #14490)
Reported by: mmichelson
Patches:
timing.txt uploaded by mmichelson (license 60)
Review: http://reviewboard.digium.com/r/164/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@179937 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1) Add module use count handling so that timing modules can be unloaded.
2) Implement unload_module() functions for the timing interface modules.
3) Allow multiple timing modules to be loaded, and use the one with the
highest priority value.
4) Report which timing module is being use in the "timing test" CLI command.
(closes issue #14489)
Reported by: russell
Review: http://reviewboard.digium.com/r/162/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@176666 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This provides a new timing interface. In order to use it,
you must be running a Linux with a kernel version of
2.6.25 or newer and glibc 2.8 or newer.
This timing interface is a good alternative if a timing
source is necessary (e.g. for IAX trunking) but DAHDI is
otherwise unnecessary for the system.
For now, this commit contains the actual work done in the
res_timing_timerfd branch. There are no notices in the README
or CHANGES files yet, but they will be added in my next commit.
The timing API of Asterisk also needs to have a bit of work done
with regards to choosing which timing interface to use. This commit
makes the choice a build-time decision, by only allowing one of
the timer interfaces to be chosen in menuselect. It would be preferable
if the choice could be made at run-time, however. The preferred timing
interface could be loaded and tested, and if it does not work, choice
number two may be used instead. That sort of thing. That is beyond
the scope of work in this branch though.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@157820 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- change ast_settimeout() to honor max rate in edge cases of file playback
(this will make some warning messages go away at the end of playing back
a file)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@125332 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r125132 | kpfleming | 2008-06-25 17:21:30 -0500 (Wed, 25 Jun 2008) | 10 lines
allow tonezone to live in a different place than DAHDI/Zaptel, since dahdi-tools and dahdi-linux are now separate packages and can be installed in different places
don't include tonezone.h in dahdi_compat.h, because only a couple of modules need it
get app_rpt building again after the DAHDI changes
(closes issue #12911)
Reported by: tzafrir
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@125138 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Convert chan_iax2 to use the timing API
- Convert usage of timing in the core to use the timing API instead of
using DAHDI directly
- Make a change to the timing API to add the set_rate() function
- change the timing core to use a rwlock
- merge a timing implementation, res_timing_dahdi
Basic testing was successful using res_timing_dahdi
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@122523 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Mark Michelson
Kinsey Moore
Joshua Colp
Matthew Jordan
Leif Madsen
Andrew Latham
Tilghman Lesher
David Vossel
Eliel C. Sardanons
Russell Bryant
Kevin P. Fleming