https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r192858 | jpeeler | 2009-05-06 17:15:19 -0500 (Wed, 06 May 2009) | 10 lines
Make ParkedCall application stop execution of the dialplan after hang up
Just changed park_exec to always return non-zero. I really wasn't entirely sure
at first if this was a bug. Decided it was since it would be surprising when
not using ParkedCall in the dialplan to hang up and have dialplan execution
continue.
(closes issue #14555)
Reported by: francesco_r
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@192861 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The local struct ast_party_connected_line connected_caller variable
was uninitialized when the copy function was called.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@192590 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r192454 | file | 2009-05-05 15:22:27 -0300 (Tue, 05 May 2009) | 8 lines
Fix an incorrect assumption that certain values on the channel will always exist when they may not.
The CDR code involved with bridges wrongly assumed that the currently executing application and data
values will always exist. It is possible for this to be false when call forwarding is involved.
(closes issue #14984)
Reported by: gincantalupo
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@192462 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There is a lot that could be said about this, but the patch is a big
improvement for performance, stability, code maintainability,
and ease of future code development.
The channel list is no longer an unsorted linked list. The main container
for channels is an astobj2 hash table. All of the code related to searching
for channels or iterating active channels has been rewritten. Let n be
the number of active channels. Iterating the channel list has gone from
O(n^2) to O(n). Searching for a channel by name went from O(n) to O(1).
Searching for a channel by extension is still O(n), but uses a new method
for doing so, which is more efficient.
The ast_channel object is now a reference counted object. The benefits
here are plentiful. Some benefits directly related to issues in the
previous code include:
1) When threads other than the channel thread owning a channel wanted
access to a channel, it had to hold the lock on it to ensure that it didn't
go away. This is no longer a requirement. Holding a reference is
sufficient.
2) There are places that now require less dealing with channel locks.
3) There are places where channel locks are held for much shorter periods
of time.
4) There are places where dealing with more than one channel at a time becomes
_MUCH_ easier. ChanSpy is a great example of this. Writing code in the
future that deals with multiple channels will be much easier.
Some additional information regarding channel locking and reference count
handling can be found in channel.h, where a new section has been added that
discusses some of the rules associated with it.
Mark Michelson also assisted with the development of this patch. He did the
conversion of ChanSpy and introduced a new API, ast_autochan, which makes it
much easier to deal with holding on to a channel pointer for an extended period
of time and having it get automatically updated if the channel gets masqueraded.
Mark was also a huge help in the code review process.
Thanks to David Vossel for his assistance with this branch, as well. David
did the conversion of the DAHDIScan application by making it become a wrapper
for ChanSpy internally.
The changes come from the svn/asterisk/team/russell/ast_channel_ao2 branch.
Review: http://reviewboard.digium.com/r/203/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@190423 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The biggest change done here was elimination of the backup_config for use with
features. Previously, the bridging code upon detecting a feature would set the
start time of the bridge to the start time of the feature. Then after the
feature had either expired or timed out the start time would be reset to the
true bridge start time from the backup_config. Now, the time differences are
calculated with respect to the newly added feature_start_time timeval instead.
There should be no behavior changes from the previous functionality aside from
the bridge timing being unaffected by either valid or partial feature matches.
Previously the timing would be increased by the length of time configured for
featuredigittimeout, which was probably never noticed.
(closes issue #14503)
Reported by: KNK
Tested by: jpeeler
Review: http://reviewboard.digium.com/r/179/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@187211 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The channel drivers which have been most heavily tested with these enhancements are
chan_sip and chan_misdn. Further work is being done to add Q.SIG support and will be
introduced in a later commit. chan_skinny has code added to it here, but according
to user pj, the support on chan_skinny is not working as of now. This will be fixed in
a later commit.
A special thanks goes out to bugtracker user gareth for getting the ball rolling and
providing the initial support for this work. Without his initial work on this, this would
not have been nearly as painless as it was.
This functionality has been tested by Digium's product quality department, as well as a
customer site running thousands of calls every day. In addition, many many many many bugtracker
users have tested this, too.
(closes issue #8824)
Reported by: gareth
Review: http://reviewboard.digium.com/r/201
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@186525 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r183386 | dvossel | 2009-03-19 14:40:07 -0500 (Thu, 19 Mar 2009) | 6 lines
Cleaning up a few things in detect disconnect patch
Initialized ast_call_feature in detect_disconnect to avoid accessing uninitialized memory. Cleaned up /param tags in features.h. No longer send dynamic features in ast_feature_detect.
issue #11583
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@183436 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r183126 | dvossel | 2009-03-19 11:15:16 -0500 (Thu, 19 Mar 2009) | 17 lines
Allow disconnect feature before a call is bridged
feature.conf has a disconnect option. By default this option is set to '*', but it could be anything. If a user wishes to disconnect a call before the other side answers, only '*' will work, regardless if the disconnect option is set to something else. This is because features are unavailable until bridging takes place. The default disconnect option, '*', was hardcoded in app_dial, which doesn't make any sense from a user perspective since they may expect it to be something different. This patch allows features to be detected from outside of the bridge, but not operated on. In this case, the disconnect feature can be detected before briding and handled outside of features.c.
(closes issue #11583)
Reported by: sobomax
Patches:
patch-apps__app_dial.c uploaded by sobomax (license 359)
11583.latest-patch uploaded by murf (license 17)
detect_disconnect.diff uploaded by dvossel (license 671)
Tested by: sobomax, dvossel
Review: http://reviewboard.digium.com/r/195/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@183172 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ast_answer(), when supplied a delay before returning to the caller, use ast_safe_sleep() to implement the delay. Unfortunately during this time any incoming frames are discarded, which is problematic for T.38 re-INVITES and other sorts of channel operations.
When a delay is not passed to ast_answer(), it still delays for up to 500 milliseconds, waiting for media to arrive. Again, though, it discards any control frames, or non-voice media frames.
This patch rectifies this situation, by storing all incoming frames during the delay period on a list, and then requeuing them onto the channel before returning to the caller.
http://reviewboard.digium.com/r/196/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@182525 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r181990 | mmichelson | 2009-03-13 12:12:32 -0500 (Fri, 13 Mar 2009) | 35 lines
Check the DYNAMIC_FEATURES of both the chan and peer when interpreting DTMF.
Dynamic features defined in the applicationmap section of features.conf allow
one to specify whether the caller, callee, or both have the ability to use the
feature. The documentation in the features.conf.sample file could be interpreted
to mean that one only needs to set the DYNAMIC_FEATURES channel variable on the
calling channel in order to allow for the callee to be able to use the features
which he should have permission to use. However, the DYNAMIC_FEATURES variable
would only be read from the channel of the participant that pressed the DTMF
sequence to activate the feature. The result of this was that the callee was
unable to use dynamic features unless the dialplan writer had taken measures
to be sure that the DYNAMIC_FEATURES variable was set on the callee's channel.
This commit changes the behavior of ast_feature_interpret to concatenate the
values of DYNAMIC_FEATURES from both parties involved in the bridge. The features
themselves determine who has permission to use them, so there is no reason to believe
that one side of the bridge could gain the ability to perform an action that they
should not have the ability to perform.
Kevin Fleming pointed out on the asterisk-users list that the typical way that this
was worked around in the past was by setting _DYNAMIC_FEATURES on the calling channel
so that the value would be inherited by the called channel. While this works, the
documentation alone is not enough to figure out why this is necessary for the callee
to be able to use dynamic features. In this particular case, changing the code to match
the documentation is safe, easy, and will generally make things easier for people for
future installations.
This bug was originally reported on the asterisk-users list by David Ruggles.
(closes issue #14657)
Reported by: mmichelson
Patches:
14657.patch uploaded by mmichelson (license 60)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@182029 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The main problem here was that cstdlib was undefining free thereby causing the
proper debug macros to not be used. ast_h323.cxx has been changed to call
ast_free instead to avoid the issue.
A few other issues were addressed:
- There were a few instances of functions improperly passing ast_free instead
of ast_free_ptr.
- Some clean up was done to avoid the debug macros intentionally being redefined.
(copied below from Kevin's commit, appreciate the help)
- disable astmm.h from doing anything when STANDALONE is defined, which is used
by the tools in the utils/ directory that use parts of Asterisk header files in
hackish ways; also ensure that utils/extconf.c and utils/conf2ael.c are
compiled with STANDALONE defined.
(closes issue #13593)
Reported by: pj
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@181135 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r179840 | file | 2009-03-03 14:27:09 -0400 (Tue, 03 Mar 2009) | 9 lines
Do not assume that the bridge_cdr is still attached to the channel when the 'h' exten is finished executing.
It is possible for a masquerade operation to occur when the 'h' exten is operating. This operation moves
the CDR records around causing the bridge_cdr to no longer exist on the channel where it is expected to.
We can not safely modify it afterwards because of this, so don't even try.
(closes issue #14564)
Reported by: meric
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@179841 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
In this case, it's just a matter of reducing the default timeouts from 2000
to 1000 msec, as the max def feature digit timeout is no longer halved.
........
r178956 | murf | 2009-02-26 14:27:32 -0700 (Thu, 26 Feb 2009) | 18 lines
This change moves the default feature digit timeout to 1000 ms from the previous default of 500.
As per bug 14515, a dev discussion arrived at a "mediated concensus"
of a default feature digit timeout of 1.0 sec. Some voted for 1300;
ctooley thought 1500 for distracted phone users in phone booths;
kpfleming put his foot down at 1.0 sec.
Users who found the previous default max delay of 250 msec perfect,
are welcome to override the new default. Notice that I said that
250 msec was the default; wait a minute, you might say, the config
file said it was 500 msec!; well, because of the bug fix for 14515,
we found that 500 msec was actually enforcing a max of 250. The bug
fix would restore 500 msec, but we felt even that was a bit tight
for most users... 2000 msec was pushed earlier by mmichelson, so
that reduces to 1000 msec after the bug fix. Enjoy!
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@178986 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r178804 | murf | 2009-02-26 10:09:03 -0700 (Thu, 26 Feb 2009) | 28 lines
This patch prevents the feature detection timeout from being cut in half.
Because the ast_channel_bridge() call will return 0 and pass
a frame pointer for both DTMF_BEGIN and DTMF_END, the feature_timer
field in hte config struct is getting decremented twice, which
effectively cuts the digittimeout in half. I added conditions
to the if statement to only let DTMF_END frames to flow thru,
which solved the problem. Also, when the frame pointer is null,
let control flow thru-- this usually happens on timeouts. I added
a comment to the code to explain what's going on and why.
Many thanks to sodom for reporting this problem. Personnally, it always seemed
like something was wrong with the featuredigittimeout, but I never
could quite decide what... and was too busy to investigate.
This bug forced the issue, and now we know.
Sodom had other issues in 14515, but I couldn't reproduce them. If
he still has problems, and wants to get them solved, he is welcome
to reopen 14515.
(closes issue #14515)
Reported by: sodom
Patches:
14515.patch uploaded by murf (license 17)
Tested by: murf, sodom
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@178828 65c4cc65-6c06-0410-ace0-fbb531ad65f3
action_bridge() and bridge_exec() both search for the channels to bridge to, and then immediately drop the lock. Instead, they should hold the lock until the masquerade is complete. This will guarantee the channel remains and prevent any other weirdness from occurring. In action_bridge() some more weirdness comes into play. Both channels are needlessly locked at the same time and perform the exact same logic. It makes sense from a coding organizational standpoint, but could cause a theoretical deadlock so I split the code up. There is an issue associated with this, but since its a rather complicated thing to reproduce I'm not certain this alone will close it.
issue# 14296
Review: http://reviewboard.digium.com/r/167/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@177226 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r176701 | jpeeler | 2009-02-17 15:54:34 -0600 (Tue, 17 Feb 2009) | 17 lines
Modify bridging to properly evaluate DTMF after first warning is played
The main problem is currently if the Dial flag L is used with a warning sound,
DTMF is not evaluated after the first warning sound. To fix this, a flag has
been added in ast_generic_bridge for playing the warning which ensures that if
a scheduled warning is missed, multiple warrnings are not played back (due to a
feature evaluation or waiting for digits). ast_channel_bridge was modified to
store the nexteventts in the ast_bridge_config structure as that information
was lost every time ast_channel_bridge was reentered, causing a hangup due to
incorrect time calculations.
(closes issue #14315)
Reported by: tim_ringenbach
Reviewed on reviewboard:
http://reviewboard.digium.com/r/163/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@176708 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r175294 | jpeeler | 2009-02-12 14:34:36 -0600 (Thu, 12 Feb 2009) | 9 lines
Fix ParkedCall event information for From field in the case of a blind transfer
If the parker information can not be obtained from the peer, try and see if
the BLINDTRANSFER channel variable has been set. Previously, a blind transfer
to the ParkAndAnnounce app would return nothing for the From.
Closes AST-189
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@175298 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r175187 | jpeeler | 2009-02-12 11:57:10 -0600 (Thu, 12 Feb 2009) | 6 lines
Fix crash in event of failed attempt to transfer to parking
The peer may not necessarily exist, such as in the case of a transfer to
ParkAndAnnounce. In this case don't try to play a sound to it.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@175188 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r173211 | jpeeler | 2009-02-03 15:57:01 -0600 (Tue, 03 Feb 2009) | 17 lines
Parking attempts made to one end of a bridge no longer will hang up due to a
parking failure.
Parking attempts made using either one-touch, or doing either a blind or
assisted transfer to the parking extension now keep up the bridge instead of
hanging up the attempted parked party. Normal causes for the parking attempt
to fail includes the specific specified extension (via PARKINGEXTEN) not being
available or if all the parking spaces are currently in use. To avoid having
to reverse a masquerade park_space_reserve was made to provide foresight if
a parking attempt will succeed and if so reserve the parking space.
(closes issue #13494)
Reported by: mdu113
Reviewed by Russell: http://reviewboard.digium.com/r/133/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@173500 65c4cc65-6c06-0410-ace0-fbb531ad65f3
to be used within the dial app, before a call is bridged.
Many thanks to sobomax for submitting this patch.
Quoting from bug 11582:
"So the goal of the patch was to use the user configured feature code during the
call setup phase. The original ast_feature_interpret() function is not well suited
for this purpose as it uses much call bridge specific data and doesn't separate a
detection of feature from a feature handler call. So a new function ast_feature_detect()
has been extracted off the ast_feature_interpret() function but keeping the original
logic intact except some insignificant changes to locking.
"Having created the ast_feature_detect() function the possibility to use feature detection
in almost any place of the asterisk code. So a call to this function has been added to
wait_for_answer() function of app_dial.so module. This code doesn't call the feature handler
however and uses old call leg disconnect logic to make the changes as small and simple as
possible to prevent unexpected problems. A disconnect feature currently is the only one
supported during call setup as other features as call parking and call transfer don't make much
sense during call setup. However if need in some of the features would arise it is much easier to
implement as the infrastructure changes are already in place with this patch."
I have cleaned up the patch somewhat, and verified that the existing functionality is not
harmed, and that the new functionality works. Terry has committed his stuff, and there were
no conflicts (see 14274).
(closes issue #11583)
Reported by: sobomax
Patches:
patch-apps__app_dial.c uploaded by sobomax (license 359)
patch-include__asterisk__features.h uploaded by sobomax (license 359)
patch-res__res_features.c uploaded by sobomax (license 359)
enable-features-during-call-setup.diff uploaded by sobomax (license 359)
11583.newdiff uploaded by murf (license 17)
enable-features-during-call-setup-1.diff uploaded by sobomax (license 359)
11583.latest-patch uploaded by murf (license 17)
Tested by: sobomax, murf
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@172890 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r172517 | twilson | 2009-01-30 11:47:41 -0600 (Fri, 30 Jan 2009) | 37 lines
Fix feature inheritance with builtin features
When using builtin features like parking and transfers, the AST_FEATURE_* flags
would not be set correctly for all instances when either performing a builtin
attended transfer, or parking a call and getting the timeout callback. Also,
there was no way on a per-call basis to specify what features someone should
have on picking up a parked call (since that doesn't involve the Dial() command).
There was a global option for setting whether or not all users who pickup a
parked call should have AST_FEATURE_REDIRECT set, but nothing for DISCONNECT,
AUTOMON, or PARKCALL.
This patch:
1) adds the BRIDGE_FEATURES dialplan variable which can be set either in the
dialplan or with setvar in channels that support it. This variable can be set
to any combination of 't', 'k', 'w', and 'h' (case insensitive matching of the
equivalent dial options), to set what features should be activated on this
channel. The patch moves the setting of the features datastores into the
bridging code instead of app_dial to help facilitate this.
2) adds global options parkedcallparking, parkedcallhangup, and
parkedcallrecording to be similar to the parkedcalltransfers option for
globally setting features.
3) has builtin_atxfer call builtin_parkcall if being transfered to the parking
extension since tracking everything through multiple masquerades, etc. is
difficult and error-prone
4) attempts to fix all cases of return calls from parking and completed builtin
transfers not having the correct permissions
(closes issue #14274)
Reported by: aragon
Patches:
fix_feature_inheritence.diff.txt uploaded by otherwiseguy (license 396)
Tested by: aragon, otherwiseguy
Review http://reviewboard.digium.com/r/138/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@172580 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r172030 | murf | 2009-01-28 11:51:16 -0700 (Wed, 28 Jan 2009) | 46 lines
This patch fixes h-exten running misbehavior in manager-redirected
situations.
What it does:
1. A new Flag value is defined in include/asterisk/channel.h,
AST_FLAG_BRIDGE_HANGUP_DONT, which used as a messenge to the
bridge hangup exten code not to run the h-exten there (nor
publish the bridge cdr there). It will done at the pbx-loop
level instead.
2. In the manager Redirect code, I set this flag on the channel
if the channel has a non-null pbx pointer. I did the same for the
second (chan2) channel, which gets run if name2 is set...
and the first succeeds.
3. I restored the ending of the cdr for the pbx loop h-exten
running code. Don't know why it was removed in the first place.
4. The first attempt at the fix for this bug was to place code
directly in the async_goto routine, which was called from a
large number of places, and could affect a large number of
cases, so I tested that fix against a fair number of transfer
scenarios, both with and without the patch. In the process,
I saw that putting the fix in async_goto seemed not to affect
any of the blind or attended scenarios, but still, I was
was highly concerned that some other scenarios I had not tested
might be negatively impacted, so I refined the patch to
its current scope, and jmls tested both. In the process, tho,
I saw that blind xfers in one situation, when the one-touch
blind-xfer feature is used by the peer, we got strange
h-exten behavior. So, I inserted code to swap CDRs and
to set the HANGUP_DONT field, to get uniform behavior.
5. I added code to the bridge to obey the HANGUP_DONT flag,
skipping both publishing the bridge CDR, and running
the h-exten; they will be done at the pbx-loop (higher)
level instead.
6. I removed all the debug logs from the patch before committing.
7. I moved the AUTOLOOP set/reset in the h-exten code in res_features
so it's only done if the h-exten is going to be run. A very
minor performance improvement, but technically correct.
(closes issue #14241)
Reported by: jmls
Patches:
14241_redirect_no_bridgeCDR_or_h_exten_via_transfer uploaded by murf (license 17)
Tested by: murf, jmls
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@172063 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is an ugly hack from 1.4 that allows the timeout callback from a parked
call to use the right channel name for the callback when the park is done with
a builtin attended transfer (that isn't completed early). This hasn't ever
worked in trunk and no one has complained yet, so eh.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@169510 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r168716 | twilson | 2009-01-15 12:22:49 -0600 (Thu, 15 Jan 2009) | 12 lines
Convert call to park_call_full to masq_park_call_announce
Since we removed the AST_PBX_KEEPALIVE return value, we need to use masqueraded
parking, otherwise we will try to call ast_hangup() in __pbx_run() and in
do_parking_thread() and then promptly crash.
(closes issue #14215)
Reported by: waverly360
Tested by: otherwiseguy
(closes issue #14228)
Reported by: kobaz
Tested by: otherwiseguy
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@168941 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
In order to merge this 1.4 patch into trunk,
I had to resolve some conflicts and wait for
Russell to make some changes to res_agi.
I re-ran all the tests; 39 calls in all, and
made fairly careful notes and comparisons: I
don't want this to blow up some aspect of
asterisk; I completely removed the KEEPALIVE
from the pbx.h decls. The first 3 scenarios
involving feature park; feature xfer to 700;
hookflash park to Park() app call all behave
the same, don't appear to leave hung channels,
and no crashes.
........
r166093 | murf | 2008-12-19 15:30:32 -0700 (Fri, 19 Dec 2008) | 131 lines
This merges the masqpark branch into 1.4
These changes eliminate the need for (and use of)
the KEEPALIVE return code in res_features.c;
There are other places that use this result code
for similar purposes at a higher level, these appear
to be left alone in 1.4, but attacked in trunk.
The reason these changes are being made in 1.4, is
that parking ends a channel's life, in some situations,
and the code in the bridge (and some other places),
was not checking the result code properly, and dereferencing
the channel pointer, which could lead to memory corruption
and crashes.
Calling the masq_park function eliminates this danger
in higher levels.
A series of previous commits have replaced some parking calls
with masq_park, but this patch puts them ALL to rest,
(except one, purposely left alone because a masquerade
is done anyway), and gets rid of the code that tests
the KEEPALIVE result, and the NOHANGUP_PEER result codes.
While bug 13820 inspired this work, this patch does
not solve all the problems mentioned there.
I have tested this patch (again) to make sure I have
not introduced regressions.
Crashes that occurred when a parked party hung up
while the parking party was listening to the numbers
of the parking stall being assigned, is eliminated.
These are the cases where parking code may be activated:
1. Feature one touch (eg. *3)
2. Feature blind xfer to parking lot (eg ##700)
3. Run Park() app from dialplan (eg sip xfer to 700)
(eg. dahdi hookflash xfer to 700)
4. Run Park via manager.
The interesting testing cases for parking are:
I. A calls B, A parks B
a. B hangs up while A is getting the numbers announced.
b. B hangs up after A gets the announcement, but
before the parking time expires
c. B waits, time expires, A is redialed,
A answers, B and A are connected, after
which, B hangs up.
d. C picks up B while still in parking lot.
II. A calls B, B parks A
a. A hangs up while B is getting the numbers announced.
b. A hangs up after B gets the announcement, but
before the parking time expires
c. A waits, time expires, B is redialed,
B answers, A and B are connected, after
which, A hangs up.
d. C picks up A while still in parking lot.
Testing this throroughly involves acting all the permutations
of I and II, in situations 1,2,3, and 4.
Since I added a few more changes (ALL references to KEEPALIVE in the bridge
code eliimated (I missed one earlier), I retested
most of the above cases, and no crashes.
H-extension weirdness.
Current h-extension execution is not completely
correct for several of the cases.
For the case where A calls B, and A parks B, the
'h' exten is run on A's channel as soon as the park
is accomplished. This is expected behavior.
But when A calls B, and B parks A, this will be
current behavior:
After B parks A, B is hung up by the system, and
the 'h' (hangup) exten gets run, but the channel
mentioned will be a derivative of A's...
Thus, if A is DAHDI/1, and B is DAHDI/2,
the h-extension will be run on channel
Parked/DAHDI/1-1<ZOMBIE>, and the
start/answer/end info will be those
relating to Channel A.
And, in the case where A is reconnected to
B after the park time expires, when both parties
hang up after the joyful reunion, no h-exten
will be run at all.
In the case where C picks up A from the
parking lot, when either A or C hang up,
the h-exten will be run for the C channel.
CDR's are a separate issue, and not addressed
here.
As to WHY this strange behavior occurs,
the answer lies in the procedure followed
to accomplish handing over the channel
to the parking manager thread. This procedure
is called masquerading. In the process,
a duplicate copy of the channel is created,
and most of the active data is given to the
new copy. The original channel gets its name
changed to XXX<ZOMBIE> and keeps the PBX
information for the sake of the original
thread (preserving its role as a call
originator, if it had this role to begin
with), while the new channel is without
this info and becomes a call target (a
"peer").
In this case, the parking lot manager
thread is handed the new (masqueraded)
channel. It will not run an h-exten
on the channel if it hangs up while
in the parking lot. The h exten will
be run on the original channel instead,
in the original thread, after the bridge
completes.
See bug 13820 for our intentions as
to how to clean up the h exten behavior.
Review: http://reviewboard.digium.com/r/29/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@166665 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r164201 | russell | 2008-12-15 08:31:37 -0600 (Mon, 15 Dec 2008) | 31 lines
Handle a case where a call can be bridged to a channel that is still ringing.
The issue that was reported was about a case where a RINGING channel got
redirected to an extension to pick up a call from parking. Once the parked
call got taken out of parking, it heard silence until the other side answered.
Ideally, the caller that was parked would get a ringing indication. This patch
fixes this case so that the caller receives ringback once it comes out of
parking until the other side answers.
The fixes are:
- Make sure we remember that a channel was an outgoing channel when doing
a masquerade. This prevents an erroneous ast_answer() call on the channel,
which causes a bogus 200 OK to be sent in the case of SIP.
- Add some additional comments to explain related parts of code.
- Update the handling of the ast_channel visible_indication field. Storing
values that are not stateful is pointless. Control frames that are events
or commands should be ignored.
- When a bridge first starts, check to see if the peer channel needs to be
given ringing indication because the calling side is still ringing.
- Rework ast_indicate_data() a bit for the sake of readability.
(closes issue #13747)
Reported by: davidw
Tested by: russell
Review: http://reviewboard.digium.com/r/90/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@164203 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r163092 | russell | 2008-12-11 10:54:51 -0600 (Thu, 11 Dec 2008) | 11 lines
Fix an issue that made it so you could only have a single caller executing
a custom feature at a time. This was especially problematic when custom
features ran for any appreciable amount of time.
The fix turned out to be quite simple. The dynamic features are now stored
in a read/write list instead of a list using a mutex.
(closes issue #13478)
Reported by: neutrino88
Fix suggested by file
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@163094 65c4cc65-6c06-0410-ace0-fbb531ad65f3
------------------------------------------------------------------------
r159808 | kpfleming | 2008-11-29 10:58:29 -0600 (Sat, 29 Nov 2008) | 7 lines
update dev-mode compiler flags to match the ones used by default on Ubuntu Intrepid, so all developers will see the same warnings and errors
since this branch already had some printf format attributes, enable checking for them and tag functions that didn't have them
format attributes in a consistent way
------------------------------------------------------------------------
in addition:
move some format attributes from main/utils.c to the header files they belong in, and fix up references to the relevant functions based on new compiler warnings
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@159818 65c4cc65-6c06-0410-ace0-fbb531ad65f3
it would be best to maintain API compatibility. Instead, this commit introduces
ao2_callback_data() which is functionally identical to ao2_callback() except
that it allows you to pass arbitrary data to the callback.
Reviewed by Mark Michelson via ReviewBoard:
http://reviewboard.digium.com/r/64
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@158959 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r158603 | murf | 2008-11-21 16:14:50 -0700 (Fri, 21 Nov 2008) | 11 lines
In reference to the fix made for 13871, I was
merging the fix into 1.6.0 and realized I missed
the code in the h-exten block, and didn't catch it
because my test case had the h-exten commented out.
So, this corrects the code I missed, as a
preventative against another crash report.
Tested with the h-exten defined, all is well.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@158606 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r158483 | murf | 2008-11-21 14:19:47 -0700 (Fri, 21 Nov 2008) | 11 lines
(closes issue #13871)
Reported by: mdu113
This one is totally my fault. The code doesn't even
create a bridge CDR if the channel CDR has POST_DISABLED.
I didn't check for that at the end of the bridge.
Fixed with a few small insertions. Tested. Looks
good. No cdr generated, no crash, no unnecc. data
objects created either.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@158484 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r157305 | mmichelson | 2008-11-18 12:25:55 -0600 (Tue, 18 Nov 2008) | 12 lines
Fix a crash in the end_bridge_callback of app_dial and
app_followme which would occur at the end of an attended
transfer. The error occurred because we initially stored
a pointer to an ast_channel which then was hung up due
to a masquerade.
This commit adds a "fixup" callback to the bridge_config
structure to allow for end_bridge_callback_data to be
changed in the case that a new channel pointer is needed
for the end_bridge_callback.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@157306 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ast_channel_search_locked need to be made. Specifically, the caller needs to be able to
pass arbitrary data which in turn is passed to the callback. This patch addresses all
of the nested functions currently in asterisk trunk.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@155590 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ao2_callback and ao2_find). Currently, passing OBJ_POINTER to either
of these mandates that the passed 'arg' is a hashable object, making
searching for an ao2 object based on outside criteria difficult.
Reviewed by Russell and Mark M. via ReviewBoard:
http://reviewboard.digium.com/r/36/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@155401 65c4cc65-6c06-0410-ace0-fbb531ad65f3