1. The documentation for ast_str_set and ast_str_append state that
the max_len parameter may be -1 in order to limit the size of the
ast_str to its current allocated size. The problem was that the max_len
parameter in all cases was a size_t, which is unsigned. Thus a -1 was
interpreted as UINT_MAX instead of -1. Changing the max_len parameter
to be ssize_t fixed this issue.
2. Once issue 1 was fixed, there was an off-by-one error in the case
where we attempted to write a string larger than the current allotted
size to a string when -1 was passed as the max_len parameter. When trying
to write more than the allotted size, the ast_str's __AST_STR_USED was
set to 1 higher than it should have been. Thanks to Tilghman for quickly
spotting the offending line of code.
Oh, and the unit test that I referenced in the top line of this commit
will be added to reviewboard shortly. Sit tight...
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@247335 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This module includes a single test so far that creates events using two
different methods and does some verification on the result to make sure
the correct data can be retrieved from the event that was created.
One bug was found in the event API while developing this test, which makes
me happy. :-)
Review: https://reviewboard.asterisk.org/r/495/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@246260 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Detect all platforms that don't like that, either, and ensure that when documentation is
missing, we pass a non-NULL pointer when outputting the corresponding documentation.
(closes issue #16689)
Reported by: bklang
Patches:
20100209__issue16689__with_tests.diff.txt uploaded by tilghman (license 14)
Review: https://reviewboard.asterisk.org/r/497/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@246030 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1) It occurred to me that the difference in usage between the error ast_str and
the ast_test_update_status() usage has turned out to be a bit ambiguous in
practice. In a lot of cases, the same message was being sent to both.
In other cases, it was only sent to one or the other. My opinion now is that
in every case, I think it makes sense to do both; we should output it to the
CLI as well as save it off for logging purposes.
This change results in most of the changes in this diff, since it required
changes to all existing unit tests. It also allowed for some simplifications
of unit test API implementation code.
2) Update ast_test_status_update() to include the file, function, and line
number for the code providing the update.
3) There are some formatting tweaks here and there. Hopefully they aren't too
distracting for code review purposes. Reviewboard's diff viewer seems to do a
pretty good job of pointing out when something is a whitespace change.
4) I moved the md5_test and sha1_test into the test_utils module. It seemed
like a better approach since these tests are so tiny.
5) I changed the number of nodes used in heap_test_2 from 1 million to
100 thousand. The only reason for this was to reduce the time it took
for this test to run.
6) Remove an unused function prototype that was at the bottom of utils.h.
7) Simplify test_insert() using the LIST_INSERT_SORTALPHA() macro. The one
minor difference in behavior is that it no longer checks for a test registered
with the same name.
8) Expand the code in test_alloc() to provide specific error messages for each
failure case, to clearly inform developers if they forget to set the name,
summary, description, etc.
9) Tweak the output of the "test show registered" CLI command. I swapped the
name and category to have the category first. It seemed more natural since
that is the sort key.
10) Don't output the status ast_str in the "test show results" CLI command.
This is going to tend to be pretty verbose, so just leave that for the
detailed test logs (test generate results).
Review: https://reviewboard.asterisk.org/r/493/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@245864 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1. URI Encoding
This patch changes ast_uri_encode()'s behavior when doreserved is enabled.
Previously when doreserved was enabled only a small set of reserved
characters were encoded. This set was comprised primarily of the reserved
characters defined in RFC3261 section 25.1, but contained other characters as
well. Rather than only escaping the reserved set, doreserved now escapes
all characters not within the unreserved set as defined by RFC 3261 and
RFC 2396. Also, the 'doreserved' variable has been renamed to 'do_special_char'
in attempts to avoid confusion.
When doreserve is not enabled, the previous logic of only encoding the
characters <= 0X1F and > 0X7f remains, except for the '%' character, which
must always be encoded as it signifies a HEX escaped character during the decode
process.
2. URI Decoding: Break up URI before decode.
In chan_sip.c ast_uri_decode is called on the entire URI instead of it's
individual parts after it is parsed. This is not good as ast_uri_decode
can introduce special characters back into the URI which can mess up parsing.
This patch resolves this by not decoding a URI until parsing is completely
done. There are many instances where we check to see if pedantic checking
is enabled before we decode a URI. In these cases a new macro,
SIP_PEDANTIC_DECODE, is used on the individual parsed segments of the URI
rather than constantly putting if (pedantic) { decode() } checks everywhere
in the code. In the areas where ast_uri_decode is not dependent upon
pedantic checking this macro is not used, but decoding is still moved to
each individual part of the URI. The only behavior that should change from
this patch is the time at which decoding occurs.
Since I had to look over every place URI parsing occurs to create this
patch, I found several places where we use duplicate code for parsing.
To consolidate the code, those areas have updated to use the parse_uri()
function where possible.
3. SIP display-name decoding according to RFC3261 section 25.
To properly decode the display-name portion of a FROM header, chan_sip's
get_calleridname() function required a complete re-write. More information
about this change can be found in the comments at the beginning of this function.
4. Unit Tests.
Unit tests for ast_uri_encode, ast_uri_decode, and get_calleridname() have been
written. This involved the addition of the test_utils.c file for testing the
utils api.
(closes issue #16299)
Reported by: wdoekes
Patches:
astsvn-16299-get_calleridname.diff uploaded by wdoekes (license 717)
get_calleridname_rewrite.diff uploaded by dvossel (license 671)
Tested by: wdoekes, dvossel, Nick_Lewis
Review: https://reviewboard.asterisk.org/r/469/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@243200 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch removes code that was duplicated from pbx.c to manager.c
in order to prevent API change in released versions of Asterisk.
There are propably also other places that would benefit from reading the
return code and react if a function returns error codes on writing a value into it.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@242919 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r242520 | tilghman | 2010-01-24 00:33:01 -0600 (Sun, 24 Jan 2010) | 8 lines
Only rebuild bison and flex source files on demand, if bison and flex are detected by the configure script.
Changed after discussion on the -dev list about possible unnecessary build
failures, due to checkouts/untars causing these special source files to
possibly be newer than their resulting C files. This should additionally
ensure that nobody need learn about extra Makefile arguments to ensure the
proper files get rebuilt when changes are made to these special source files.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@242521 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If the limit was set past MAX_INT upon answering, the call was immediately
hung up due to overflow from the return of ast_tvdiff_ms (in ast_check_hangup).
The time calculation functions ast_tvdiff_sec and ast_tvdiff_ms have been
changed to return an int64_t to prevent overflow. Also the reporter suggested
adding a message indicating the reason for the call hanging up. Given that the
new limit is so much higher, the message (which would only really be useful in
the overflow scenario) has been made a debug message only.
(closes issue #16006)
Reported by: viraptor
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@241143 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Specifically, by setting TESTTIME() to a particular date and time, you
can test whether a dialplan correctly branches as was intended. This was
developed after recent questions on the -users list on how to test their
holiday dialplan logic.
(closes issue #16464)
Reported by: tilghman
Patches:
20100112__issue16464.diff.txt uploaded by tilghman (license 14)
Review: https://reviewboard.asterisk.org/r/458/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@239957 65c4cc65-6c06-0410-ace0-fbb531ad65f3
During the process of removing an audiohook from one channel
and attaching it to another the audiohook's status is updated
to DONE and then back to whatever it was previously. Typically
updating the status after setting it to DONE is not a good idea
because DONE can trigger unrecoverable audiohook destruction
events... because of this a conditional check was added to
audiohook_update_status to explicitly prevent the audiohook
from ever changing after being set to DONE. It was this check
that prevented audiohook inherit from work properly though.
Now ast_audiohook_move_by_source is treated as a special exception,
as the audiohook must be returned to its previous status after
attaching it to the new channel. This is only a safe operation
because the audiohook's lock is held the entire time, otherwise
this could cause trouble.
(closes issue #16522)
Reported by: corruptor
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@238635 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The ast_test_status_update() function is defined in test.h.
When TEST_FRAMEWORK is not enabled a macro is defined as a no-op
place holder for this function. The macro did not contain
the correct number of arguments. This caused a compile error.
Much thanks to wdoekes for reporting the issue and supplying the
patch!
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@238091 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r237405 | tilghman | 2010-01-04 12:19:00 -0600 (Mon, 04 Jan 2010) | 16 lines
Add a flag to disable the Background behavior, for AGI users.
This is in a section of code that relates to two other issues, namely
issue #14011 and issue #14940), one of which was the behavior of
Background when called with a context argument that matched the current
context. This fix broke FreePBX, however, in a post-Dial situation.
Needless to say, this is an extremely difficult collision of several
different issues. While the use of an exception flag is ugly, fixing all
of the issues linked is rather difficult (although if someone would like
to propose a better solution, we're happy to entertain that suggestion).
(closes issue #16434)
Reported by: rickead2000
Patches:
20091217__issue16434.diff.txt uploaded by tilghman (license 14)
20091222__issue16434__1.6.1.diff.txt uploaded by tilghman (license 14)
Tested by: rickead2000
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@237406 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r236585 | seanbright | 2009-12-28 10:12:08 -0500 (Mon, 28 Dec 2009) | 7 lines
Try a test compile to see if PTHREAD_ONCE_INIT requires extra braces.
There was conditional code (based on build platform) to optioinally wrap
PTHREAD_ONCE_INIT in braces that was removed since it is fixed in newer versions
of Solaris/OpenSolaris, but I am still running into it on Solaris 10 x86 so add
a configure-time check for it.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@236613 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The Unit Test Framework is a new API that manages registration and
execution of unit tests in Asterisk with the purpose of verifying the
operation of C functions. The Framework consists of a single test
manager accompanied by a list of registered test functions defined
within the code. A test is defined, registered, and unregistered
from the framework using a set of macros which allow the test code
to only be compiled within asterisk when the TEST_FRAMEWORK flag is
enabled in menuselect. This allows the test code to exist in the
same file as the C functions it intends to verify. Registered tests
may be viewed and executed via a set of new CLI commands. CLI commands
are also present for generating and exporting test results into xml
and txt formats.
For more information and use cases please refer to the documentation
provided at the beginning of the test.h file.
Review: https://reviewboard.asterisk.org/r/447/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@236027 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r235635 | jpeeler | 2009-12-18 16:29:51 -0600 (Fri, 18 Dec 2009) | 48 lines
Correct CDR dispositions for BUSY/FAILED
This patch is simple in that it reorders the disposition defines so that the fix
for issue 12946 works properly (the default CDR disposition was changed to
AST_CDR_NOANSWER). Also, the AST_CDR_FLAG_ORIGINATED flag was set in ast_call to
ensure all CDR records are written.
The side effects of CDR changes are scary, so I'm documenting the test cases
performed to attempt to catch any regressions. The following tests were all
performed using 1.4 rev 195881 vs head (235571) + patch:
A calls B
C calls B (busy)
Hangup C
Hangup A
(Both SIP and features)
A calls B
A blind transfers to C
Hangup C
(Both SIP and features)
A calls B
A attended transfers to C
Hangup C
A calls B
A attended transfers to C (SIP)
C blind transfers to A (features)
Hangup A
All of the test scenario CDRs matched.
The following tests were performed just with the patch to ensure proper operation
(with unanswered=yes):
exten =>s,1,Answer
exten =>s,n,ResetCDR(w)
exten =>s,n,ResetCDR(w)
exten =>s,1,ResetCDR(w)
exten =>s,n,ResetCDR(w)
(closes issue #16180)
Reported by: aatef
Patches:
bug16180.patch uploaded by jpeeler (license 325)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@235660 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The option is global and currently the acceptable values as noted in the sample
config are accept or deny.
(closes issue #15228)
Reported by: lp0
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@235342 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Classes are now tracked past removal from the core container, and module
removal is actively prevented until all references are freed.
* A hanging reference stored in the channel has been removed. This could have
caused a mismatch and the music state not properly cleared, if two or more
reloads occurred between MOH being stopped and MOH being restarted.
* In certain circumstances, duplicate classes were possible.
* A race existed at reload time between a process being killed and the thread
responsible for reading from the related pipe respawning that process.
* Several reference counts have also been corrected. At least one could have
caused deleted classes to stick around forever, consuming resources. This
originally manifested as MOH external processes that were not killed at
reload time.
(closes issue #16279, closes issue #16207)
Reported by: parisioa, dcabot
Patches:
20091202__issue16279__2.diff.txt uploaded by tilghman (license 14)
Tested by: parisioa, tilghman
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@232660 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In the process of swapping ULAW to a place in the extended codec space, we
found several unhandled cases, where a 32-bit integer was still being used to
handle a codec field. Most of these have been fixed with this commit, although
there is at least one case (codec_dahdi) which depends upon outside headers to
be altered before a conversion can be made.
(Fixes AST-278, SWP-459)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@231850 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1) Allow users of UDPTL stack to associate a character-string tag with a UDPTL
session, so that log/error/debug messages generated by the UDPTL stack can
be 'connected' to the endpoint that caused them to be generated.
2) Improve comments (and process) of calculating the far end's maximum IFP size
when redundancy mode is in use for error correction.
3) When an IFP larger than the calculated 'far max IFP' size is presented for
writing, truncate it rather than putting in the buffer and allowing the buffer
to overflow; this will cause the ends to retrain to a lower bit rate that
produces IFPs of an appropriate size if possible, and if not possible, the
FAX transfer will fail completely. In these cases, it is due to the one endpoint
supplying a T38FaxMaxDatagram value that is improperly calculated and is
too low to be of use; we have configuration options available to override
this behavior.
4) Eliminate use of T38FaxMaxDatagram value in udptl.conf; it is no longer
needed.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@231692 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Add REPLACE function, which searches a given variable for a set of
characters and replaces each with a given character.
* Add PASSTHRU function, which passes a literal string back, like a NoOp for
functions. Intent is to be able to specify a literal string to another
function that takes a variable name as an argument.
* Let the array manipulation functions work with dialplan functions, in
addition to variables. This allows the array manipulation functions to
modify ASTDB and ODBC backends, assuming the func_odbc configuration has
both read and write functions.
(closes issue #15223)
Reported by: ajohnson
Patches:
20091112__issue15223.diff.txt uploaded by tilghman (license 14)
Tested by: lmadsen, tilghman
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@230994 65c4cc65-6c06-0410-ace0-fbb531ad65f3