This adds a new CEL event type, AST_CEL_LOCAL_OPTIMIZE, to represent
local channel optimizations. Local channel optimizations were one of
several things conveyed by the now defunct BRIDGE_UPDATE event type.
This also adds a unit test to test generation of this new CEL event.
Review: https://reviewboard.asterisk.org/r/2676/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394870 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
* It merges Jaco Kroon's patch from ASTERISK-20754, which provides channel
information in the RTCP events. Because Stasis provides a cache, Jaco's
patch was modified to pass the channel uniqueid to the RTP layer as
opposed to a pointer to the channel. This has the following benefits:
(1) It keeps the RTP engine 'clean' of references back to channels
(2) It prevents circular dependencies and other potential ref counting issues
* The RTP engine now allows any RTP implementation to raise RTCP messages.
Potentially, other implementations (such as res_rtp_multicast) could also
raise RTCP information. The engine provides structs to represent RTCP headers
and RTCP SR/RR reports.
* Some general refactoring in res_rtp_asterisk was done to try and tame the
RTCP code. It isn't perfect - that's *way* beyond the scope of this work -
but it does feel marginally better.
* A few random bugs were fixed in the RTCP statistics. (Example: performing an
assignment of a = a is probably not correct)
* We now raise RTCP events for each SR/RR sent/received. Previously we wouldn't
raise an event when we sent a RR report.
Note that this work will be of use to others who want to monitor call quality
or build modules that report call quality statistics. Since the events are now
moving across the Stasis message bus, this is far easier to accomplish. It is
also a first step (though by no means the last step) towards getting Olle's
pinefrog work incorporated.
Again: note that the patch by Jaco Kroon was modified slightly for this work;
however, he did all of the hard work in finding the right places to set the
channel in the RTP engine across the channel drivers. Much thanks goes to Jaco
for his hard work here.
Review: https://reviewboard.asterisk.org/r/2603/
(closes issue ASTERISK-20574)
Reported by: Jaco Kroon
patches:
asterisk-rtcp-channel.patch uploaded by jkroon (License 5671)
(closes issue ASTERISK-21471)
Reported by: Matt Jordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393740 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is the first step in adding recording support to the
Asterisk REST Interface.
Recordings are stored in /var/spool/recording. Since recordings may be
destructive (overwriting existing files), the API rejects attempts to
escape the recording directory (avoiding issues if someone attempts to
record to ../../lib/sounds/greeting, for example).
(closes issue ASTERISK-21594)
(closes issue ASTERISK-21581)
Review: https://reviewboard.asterisk.org/r/2612/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393550 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The appropriate settings for the Stasis threadpool is very system
specific, depending upon both workload and system configuration.
This patch adds a stasis.conf file which can be used to configure the
key attributes of the threadpool for the Stasis message bus.
(closes issue ASTERISK-21280)
Review: https://reviewboard.asterisk.org/r/2651/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393542 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Parking typically occurs when a channel is transferred to a parking extension.
When this occurs, the channel never actually hits the dialplan if the extension
it was transferred to was a "parking extension", that is, the extension in
the first priority calls the Park application. Instead, the channel is
immediately sent into the holding bridge acting as the parking bridge.
This is problematic.
Because we never go out to the dialplan, the CDRs won't transition properly
and the application field will not be set to "Park". CDRs typically swallow
holding bridges, so the CDR itself won't even be generated.
This patch handles this by pulling out the holding bridge handling into its
own CDR state. CDRs now have an explicit parking state that accounts for this
specific subclass of the holding bridge. In addition, we handle the parking
stasis message to set application specific data on the CDR such that the
last known application for the CDR properly reflects "Park".
This is a bit sad since we're working around the odd internal implementation
of parking that exists in Asterisk (and that we had to maintain in order to
continue to meet some odd use cases of parking), but at least the code to
handle that is where it belongs: in CDRs as opposed to sprinkled liberally
throughout the codebase.
This patch also properly clears the OUTBOUND channel flag from a channel when
it leaves a bridge, and tweaks up dialing handling to properly compare the
correct CDR with the channel calling/being dialed.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393130 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds support for stasis/sounds and stasis/sounds/{ID} queries via
the Asterisk RESTful Interface (ARI, formerly Stasis-HTTP).
The following changes have been made to accomplish this:
* A modular indexer was created for local media.
* A new function to get an ast_format associated with a file extension
was added.
* Modifications were made to the built-in HTTP server so that URI
decoding could be deferred to the URI handler when necessary.
* The Stasis-HTTP sounds JSON documentation was modified to handle
cases where multiple languages are installed in different formats.
* Register and Unregister events for formats were added to the system
topic.
(closes issue ASTERISK-21584)
(closes issue ASTERISK-21585)
Review: https://reviewboard.asterisk.org/r/2507/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392700 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is the initial push to update Asterisk's CDR engine for the new
bridging framework. This patch guts the existing CDR engine and builds the new
on top of messages coming across Stasis. As changes in channel state and bridge
state are detected, CDRs are built and dispatched accordingly. This
fundamentally changes CDRs in a few ways.
(1) CDRs are now *very* reflective of the actual state of channels and bridges.
This means CDRs track well with what an actual channel is doing - which
is useful in transfer scenarios (which were previously difficult to pin
down). It does, however, mean that CDRs cannot be 'fooled'. Previous
behavior in Asterisk allowed for CDR applications, channels, and other
properties to be spoofed in parts of the code - this no longer works.
(2) CDRs have defined behavior in multi-party scenarios. This behavior will not
be what everyone wants, but it is a defined behavior and as such, it is
predictable.
(3) The CDR manipulation functions and applications have been overhauled. Major
changes have been made to ResetCDR and ForkCDR in particular. Many of the
options for these two applications no longer made any sense with the new
framework and the (slightly) more immutable nature of CDRs.
There are a plethora of other changes. For a full description of CDR behavior,
see the CDR specification on the Asterisk wiki.
(closes issue ASTERISK-21196)
Review: https://reviewboard.asterisk.org/r/2486/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391947 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This pulls bridge-related CEL event triggers out of the code in which
they were residing and pulls them into cel.c where they are now
triggered by changes in bridge snapshots. To get access to the
Stasis-Core parking topic in cel.c, the Stasis-Core portions of parking
init have been pulled into core Asterisk init.
This also adds a new CEL event (AST_CEL_BRIDGE_TO_CONF) that indicates
a two-party bridge has transitioned to a multi-party conference. The
reverse cannot occur in CEL terms even though it may occur in actuality
and two party bridges which receive a AST_CEL_BRIDGE_TO_CONF will be
treated as multi-party conferences for the duration of the bridge.
Review: https://reviewboard.asterisk.org/r/2563/
(closes issue ASTERISK-21564)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391643 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This uses the channel state change events from Stasis-Core to determine
when channel-related CEL events should be raised. Those refactored in
this patch are:
* AST_CEL_CHANNEL_START
* AST_CEL_ANSWER
* AST_CEL_APP_START
* AST_CEL_APP_END
* AST_CEL_HANGUP
* AST_CEL_CHANNEL_END
Retirement of Linked IDs is also refactored.
CEL configuration has been refactored to use the config framework.
Note: Some HANGUP events are not generated correctly because the bridge
layer does not propagate hangupcause/hangupsource information yet.
Review: https://reviewboard.asterisk.org/r/2544/
(closes issue ASTERISK-21563)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391622 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch addresses issues during immediate shutdowns, where modules
are not unloaded, but Asterisk atexit handlers are run.
In the typical case, this usually isn't a big deal. But the
introduction of the Stasis message bus makes it much more likely for
asynchronous activity to be happening off in some thread during
shutdown.
During an immediate shutdown, Asterisk skips unloading modules. But
while it is processing the atexit handlers, there is a window of time
where some of the core message types have been cleaned up, but the
message bus is still running. Specifically, it's still running
module subscriptions that might be using the core message types. If a
message is received by that subscription in that window, it will
attempt to use a message type that has been cleaned up.
To solve this problem, this patch introduces ast_register_cleanup().
This function operates identically to ast_register_atexit(), except
that cleanup calls are not invoked on an immediate shutdown. All of
the core message type and topic cleanup was moved from atexit handlers
to cleanup handlers.
This ensures that core type and topic cleanup only happens if the
modules that used them are first unloaded.
This patch also changes the ast_assert() when accessing a cleaned up
or uninitialized message type to an error log message. Message type
functions are actually NULL safe across the board, so the assert was a
bit heavy handed. Especially for anyone with DO_CRASH enabled.
Review: https://reviewboard.asterisk.org/r/2562/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390122 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Initialize a Stasis-Core message type prior to initializing a caching topic.
The caching topic will attempt to use the message type.
* Don't attempt to publish Stasis-Core messages from remote console connections.
They aren't the main process; they shouldn't attempt to behave as it (they also
don't have the infrastructure to do so)
* Don't treat a JSON object as an ao2 object (whoops)
* In asterisk.c, ref bump the JSON even package that is distributed with the
event meta data. The callers assume that they own the reference, and the packing
routine steals references.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389785 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch moves a number of AMI events over to the Stasis-Core message bus.
This includes:
* ChanSpyStart/Stop
* MonitorStart/Stop
* MusicOnHoldStart/Stop
* FullyBooted/Reload
* All Voicemail/MWI related events
In addition, it adds some Stasis-Core and AMI support for generic AMI messages,
refactors the message router in AMI to use a single router with topic
forwarding for the topics that AMI cares about, and refactors MWI message
types and topics to be more name compliant.
Review: https://reviewboard.asterisk.org/r/2532
(closes issue ASTERISK-21462)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389733 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Breaks many things until they can be reworked. A partial list:
chan_agent
chan_dahdi, chan_misdn, chan_iax2 native bridging
app_queue
COLP updates
DTMF attended transfers
Protocol attended transfers
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389378 65c4cc65-6c06-0410-ace0-fbb531ad65f3
An endpoint is an external device/system that may offer/accept
channels to/from Asterisk. While this is a very useful concept for end
users, it is surprisingly not a core concept within Asterisk itself.
This patch defines ast_endpoint as a separate object, which channel
drivers may use to expose their concept of an endpoint. As the channel
driver creates channels, it can use ast_endpoint_add_channel() to
associate channels to the endpoint. This updated the endpoint
appropriately, and forwards all of the channel's events to the
endpoint's topic.
In order to avoid excessive locking on the endpoint object itself, the
mutable state is not accessible via getters. Instead, you can create a
snapshot using ast_endpoint_snapshot_create() to get a consistent
snapshot of the internal state.
This patch also includes a set of topics and messages associated with
endpoints, and implementations of the endpoint-related RESTful
API. chan_sip was updated to create endpoints with SIP peers, but the
state of the endpoints is not updated with the state of the peer.
Along for the ride in this patch is a Stasis test API. This is a
stasis_message_sink object, which can be subscribed to a Stasis
topic. It has functions for blocking while waiting for conditions in
the message sink to be fulfilled.
(closes issue ASTERISK-21421)
Review: https://reviewboard.asterisk.org/r/2492/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@387932 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch:
* Cleans up some doxygen
* Prevents leaking the system level Stasis topics and messages
on exit (users of valgrind will be happier)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@387633 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In the move from Asterisk's event system to Stasis, this makes
distributed device state aggregation always-on, removes unnecessary
task processors where possible, and collapses aggregate and
non-aggregate states into a single cache for ease of retrieval. This
also removes an intermediary step in device state aggregation.
Review: https://reviewboard.asterisk.org/r/2389/
(closes issue ASTERISK-21101)
Patch-by: Kinsey Moore <kmoore@digium.com>
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@385860 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When I moved res_json.c to json.c, I left the MODULE_INFO stuff in there,
which was interesting if you ran module show. I also forgot to call what
was in module_load() from asterisk main().
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383611 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Remove MWI's dependency on the event system by moving it to
Stasis-core. This also introduces forwarding topic pools in Stasis-core
which aggregate many dynamically allocated topics into a single primary
topic.
Review: https://reviewboard.asterisk.org/r/2368/
(closes issue ASTERISK-21097)
Patch-by: Kinsey Moore
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383284 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For the initial use of this bus, I took some work kmoore did creating
channel snapshots. So rather than create AMI events directly in the
channel code, this patch generates Stasis events, which manager.c uses
to then publish the AMI event.
This message bus provides a generic publish/subscribe mechanism within
Asterisk. This message bus is:
- Loosely coupled; new message types can be added in seperate modules.
- Easy to use; publishing and subscribing are straightforward
operations.
In addition to basic publish/subscribe, the patch also provides
mechanisms for message forwarding, and for message caching.
(issue ASTERISK-20887)
(closes issue ASTERISK-20959)
Review: https://reviewboard.asterisk.org/r/2339/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382685 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch allows a module to define its configuration in XML in source, such
that it can be parsed by the XML documentation engine. Documentation is
generated in a two-pass approach:
1. The documentation is first generated from the XML pulled from the source
2. The documentation is then enhanced by the registration of configuration
options that use the configuration framework
This patch include configuration documentation for the following modules:
* chan_motif
* res_xmpp
* app_confbridge
* app_skel
* udptl
Two new CLI commands have been added:
* config show help - show configuration help by module, category, and item
* xmldoc dump - dump the in-memory representation of the XML documentation to
a new XML file.
Review: https://reviewboard.asterisk.org/r/2278
Review: https://reviewboard.asterisk.org/r/2058
patches:
on review 2058 uploaded by twilson
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381527 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The core module related to coloring terminal output was old and needed
some love. The main thing here was an attempt to get rid of the
obscene number of stack-local buffers that were allocated for no other
reason than to colorize some output. Instead, this uses a simple trick
to allocate several buffers within threadlocal storage, then
automatically rotates between them, so that you can make multiple calls
to the colorization routine within one function and not need to
allocate multiple buffers.
Review: https://reviewboard.asterisk.org/r/2241/
Patches:
bug.patch uploaded by Tilghman Lesher
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@381448 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Sorcery is a unifying data access layer which provides a pluggable mechanism to allow
object creation, retrieval, updating, and deletion using different backends (or wizards).
This is a fancy way of saying "one interface to rule them all" where them is configuration,
realtime, and anything else that comes along.
Review: https://reviewboard.asterisk.org/r/2259/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@380069 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When r376428 was commited to re-order start up sequences to be more tolerant of
forking with thread primitives, a few items were changed that caused changes
in behavior on some distros. This includes:
* Not displaying the splash screen on a remote console.
* Displaying an error message on stderr when a remote console cannot connect
to a running instance of Asterisk.
In the first case, the splash screen was re-added (thanks to Michael L. Young).
In the second case, the various init.d scripts were modified to pipe stderr
to /dev/null, as the error message is useful - if you execute a remote
console or a remote console command execution and it fail, it should tell
you. Note that the error message was always present, it just failed to be
printed prior to r376428.
Much thanks to the folks who quickly reported this problem, provided solutions,
and promptly tested the various init.d scripts on a variety of distros.
(closes issue ASTERISK-20945)
Reported by: Warren Selby
Tested by: Michael L. Young, Jamuel Starkey, kaldemar, Danny Nicholas, mjordan
patches:
asterisk-20945-remote-intro-msg.diff uploaded by elguero (license 5026)
ASTERISK-20945-1.8-mjordan.diff uploaded by mjordan (license 6283)
........
Merged revisions 379760 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 379777 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 379790 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@379791 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When Asterisk forks itself into the background via a call to daemon, it must
re-set the pid value of the new process. Otherwise, astcanary gets the pid
value of the process before the fork, which prevents it from running. Asterisk
eventually starts lowering its priority, as it can no longer communicate
with the proverbial canary in the coal mine.
This patch ensures that the correct process identifier is used by astcanary.
Note that this is getting committed to 10 as a regression fix.
(closes issue ASTERISK-20947)
Reported by: Jakob Hirsch
Tested by: mjordan
patches:
asterisk-10.12.0.astcanary_ppid.diff uploaded by Jakob Hirsch (license 6113)
........
Merged revisions 379509 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 379510 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 379513 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@379518 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This provides a common API for dealing with unique identifiers.
The API provides methods to create, parse, copy, and stringify UUIDs.
An accompanying unit test is provided that tests all operations.
(closes issue ASTERISK-20726)
reported by Matt Jordan
Review: https://reviewboard.asterisk.org/r/2217
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@377846 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Adds the following CLI commands to control MALLOC_DEBUG reporting of
unreleased malloc memory when Asterisk is shut down.
memory atexit list on
memory atexit list off
memory atexit summary byline
memory atexit summary byfunc
memory atexit summary byfile
memory atexit summary off
* Made check all remaining allocated region blocks atexit for fence
violations.
* Increased the allocated region hash table size by about three times. It
still isn't large enough considering the number of malloced blocks
Asterisk uses.
* Made CLI "memory show allocations anomalies" use
regions_check_all_fences().
Review: https://reviewboard.asterisk.org/r/2196/
........
Merged revisions 376788 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 376789 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 376790 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@376791 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Although it is very rare and timing dependent, the potential exists for the
call to 'daemon' to cause what appears to be a deadlock in Asterisk during
startup. This can occur when a recursive mutex is obtained prior to the
daemon call executing. Since daemon uses fork to send the process into the
background, any threading primitives are unsafe to re-use after the call.
Implementations of pthread recursive mutexes are highly likely to store the
thread identifier of the thread that previously obtained the mutex. If
the mutex was locked prior to the fork, a subsequent unlock operation will
potentially fail as the thread identifier is no longer valid. Since the
mutex is still locked, all subsequent attempts to grab the mutex by other
threads will block.
This behavior exhibited itself most often when DEBUG_THREADS was enabled, as
this compile time option surrounds the mutexes in Asterisk with another
recursive mutex that protects the storage of thread related information. This
made it much more likely that a recursive mutex would be obtained prior to
daemon and unlocked after the call.
This patch does the following:
a) It backports a patch from Asterisk 11 that prevents the spawning of the
localtime monitoring thread. This thread is now spawned after Asterisk has
fully booted.
b) It re-orders the startup sequence to call daemon earlier during Asterisk
startup. This limits the potential of threading primitives being accessed
by initialization calls before daemon is called.
c) It removes calls to ast_verbose/ast_log/etc. prior to daemon being called.
Developers should send error messages directly to stderr prior to daemon,
as calls to ast_log may access recursive mutexes that store thread related
information.
d) It reorganizes when thread local storage is created for storing lock
information during the creation of threads. Prior to this patch, the
read/write lock protecting the list of threads in ast_register_thread would
utilize the lock in the thread local storage prior to it being initialized;
this patch prevents that.
On a very related note, this patch will *greatly* improve the stability of the
Asterisk Test Suite.
Review: https://reviewboard.asterisk.org/r/2197
(closes issue ASTERISK-19463)
Reported by: mjordan
Tested by: mjordan
........
Merged revisions 376428 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 376431 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 376441 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@376447 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Makes malloc() behave like calloc(). It will return a memory block
filled with 0x55. A nonzero value.
* Makes free() fill the released memory block and boundary fence's with
0xdeaddead. Any pointer use after free is going to have a pointer
pointing to 0xdeaddead. The 0xdeaddead pointer is usually an invalid
memory address so a crash is expected.
* Puts the freed memory block into a circular array so it is not reused
immediately.
* When the circular array rotates out a memory block to the heap it checks
that the memory has not been altered from 0xdeaddead.
* Made the astmm_log message wording better.
* Made crash if the DO_CRASH menuselect option is enabled and something is
found.
* Fixed a potential alignment issue on 64 bit systems.
struct ast_region.data[] should now be aligned correctly for all
platforms.
* Extracted region_check_fences() from __ast_free_region() and
handle_memory_show().
* Updated handle_memory_show() CLI usage help.
Review: https://reviewboard.asterisk.org/r/2182/
........
Merged revisions 376029 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 376030 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 376048 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@376049 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Update and extend the configuration_file group and enable linking. Commit other cleanups from multi-version Doxygen testing. Update title that was left behind many years ago.
(issue ASTERISK-20259)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375182 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Whitespace, doc-blocks, spelling, case, missing and incorrect tags.
* Add cleanup to Makefile for the Doxygen configuration update
* Start updating Doxygen configuration for cleaner output
* Enable inclusion of configuration files into documentation
* remove mantisworkflow...
* update documentation README
* Add markup to Tilghman's email and talk with him about updating his email, he knows...
* no code changes on this commit other than the mentioned Makefile change
(issue ASTERISK-20259)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373384 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Doxygen updates including mistakes, misspellings, missing parameters, updates for Doxygen style. Some missing txt file links are removed but their content or essense will be included in some later updates. A majority of the txt files were removed in the 1.6 era but never noted. The HR and EXTREF are simple changes that make the documentation more compatable with more versions of Doxygen.
Further updates coming.
(issue ASTERISK-20259)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373330 65c4cc65-6c06-0410-ace0-fbb531ad65f3
message.c makes use of a special message queue channel that exists
in thread storage. This channel never goes away due to the fact that
the taskprocessor used by message.c does not get shut down, meaning
that it never ends the thread that stores the channel.
This patch fixes the problem by shutting down the taskprocessor when
Asterisk is shut down. In addition, the thread storage has a destructor
that will release the channel reference when the taskprocessor is destroyed.
(closes issue AST-937)
Reported by Jason Parker
Patches:
AST-937.patch uploaded by Mark Michelson (License #5049)
Tested by Jason Parker
........
Merged revisions 372885 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 372888 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@372891 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch changes the Asterisk configure script and build system to detect
the presence of the NetBSD editline library (libedit) on the system. If it is
found, it will be used in preference to the version included in the Asterisk
source tree.
(closes issue ASTERISK-18725)
Reported by: Jeffrey C. Ollie
Review: https://reviewboard.asterisk.org/r/1528/
Patches:
0001-Allow-linking-building-against-an-external-editline.patch uploaded by jcollie (license #5373) (heavily modified by kpfleming)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370481 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds Named ACL functionality to Asterisk. This allows system
administrators to define an ACL and refer to it by a unique name. Configurable
items can then refer to that name when specifying access control lists.
It also includes updates to all core supported consumers of ACLs. That includes
manager, chan_sip, and chan_iax2. This feature is based on the deluxepine-trunk
by Olle E. Johansson and provides a subset of the Named ACL functionality
implemented in that branch. For more information on this feature, see acl.conf
and/or the Asterisk wiki.
Review: https://reviewboard.asterisk.org/r/1978/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369959 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The awk script parses out the first instance of the DOCUMENTATION tag that it
finds within a file. If a file did not previously have a DOCUMENTATION tag
but received one due to it having an AMI event, then the XML fragment
associated with the AMI event was erroneously placed in the resulting XML
file. Without the python scripts, these XML fragments will not validate.
This patch adds DOCUMENTATION tags at the top of those files that did
not previously have them to prevent the awk script from pulling AMI event
documentation.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369910 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds some basic documentation for a number of modules. This
includes core source files in Asterisk (those in main), as well as
chan_agent, chan_dahdi, chan_local, sig_analog, and sig_pri. The DTD
has also been updated to allow referencing of AMI commands.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369905 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r369001 | kpfleming | 2012-06-15 10:56:08 -0500 (Fri, 15 Jun 2012) | 11 lines
Add support-level indications to many more source files.
Since we now have tools that scan through the source tree looking for files
with specific support levels, we need to ensure that every file that is
a component of a 'core' or 'extended' module (or the main Asterisk binary)
is explicitly marked with its support level. This patch adds support-level
indications to many more source files in tree, but avoids adding them to
third-party libraries that are included in the tree and to source files
that don't end up involved in Asterisk itself.
........
r369002 | kpfleming | 2012-06-15 10:57:14 -0500 (Fri, 15 Jun 2012) | 3 lines
Add a script to enable finding source files without support-levels defined.
........
Merged revisions 369001-369002 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 369005 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369013 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Presence support has been added. This is accomplished by
allowing for presence hints in addition to device state
hints. A dialplan function called PRESENCE_STATE has been
added to allow for setting and reading presence. Presence
can be transmitted to Digium phones using custom XML
elements in a PIDF presence document.
Voicemail has new APIs that allow for moving, removing,
forwarding, and playing messages. Messages have had a new
unique message ID added to them so that the APIs will work
reliably. The state of a voicemail mailbox can be obtained
using an API that allows one to get a snapshot of the mailbox.
A voicemail Dialplan App called VoiceMailPlayMsg has been
added to be able to play back a specific message.
Configuration hooks have been added. Configuration hooks
allow for a piece of code to be executed when a specific
configuration file is loaded by a specific module. This is
useful for modules that are dependent on the configuration
of other modules.
chan_sip now has a public method that allows for a custom
SIP INFO request to be sent mid-dialog. Digium phones use
this in order to display progress bars when files are played.
Messaging support has been expanded a bit. The main
visible difference is the addition of an AMI action
MessageSend.
Finally, a ParkingLots manager action has been added in order
to get a list of parking lots.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368435 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes to situations that could cause the CEL LINKEDID_END event to
be missed.
1) During a core stop gracefully, modules are unloaded when ast_active_channels
== 0. The LINKDEDID_END event fires during the channel destructor. This means
that occasionally, the cel_* module will be unloaded before the channel is
destroyed. It seemed generally useful to wait until the refcount of all
channels == 0 before unloading, so I added a channel counter and used it in the
shutdown code.
2) During a masquerade, ast_channel_change_linkedid is called. It calls
ast_cel_check_retire_linkedid which unrefs the linkedid in the linkedids
container in cel.c. It didn't ref the new linkedid. Now it does.
Review: https://reviewboard.asterisk.org/r/1900/
........
Merged revisions 367292 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 367299 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@367309 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk has a setting for the minimum allowed DTMF. If we get shorter
DTMF tones, these will be changed to the minimum on the outbound call
leg.
(closes issue ASTERISK-19772)
Review: https://reviewboard.asterisk.org/r/1882/
Reported by: oej
Tested by: oej
Patches by: oej
Thanks to the reviewers.
1.8 branch for this patch: agave-dtmf-duration-asterisk-conf-1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@363558 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* chan_mobile: Fixed an overrun where the cind_state buffer (an integer array
of size 16) would be overrun due to improper bounds checking. At worst, the
buffer can be overrun by a total of 48 bytes (assuming 4-byte integers),
which would still leave it within the allocated memory of struct hfp. This
would corrupt other elements in that struct but not necessarily cause any
further issues.
* app_sms: The array imsg is of size 250, while the array (ud) that the data
is copied into is of size 160. If the size of the inbound message is
greater then 160, up to 90 bytes could be overrun in ud. This would corrupt
the user data header (array udh) adjacent to ud.
* chan_unistim: A number of invalid memmoves are corrected. These would move
data (which may or may not be valid) into the ends of these buffers.
* asterisk: ast_console_toggle_loglevel does not check that the console log
level being set is less then or equal to the allowed log levels of 32.
* format_pref: In ast_codec_pref_prepend, if any occurrence of the specified
codec is not found, the value used to index into the array pref->order
would be one greater then the maximum size of the array.
* jitterbuf: If the element being placed into the jitter buffer lands in the
last available slot in the jitter history buffer, the insertion sort attempts
to move the last entry in the buffer into one slot past the maximum length
of the buffer. Note that this occurred for both the min and max jitter
history buffers.
* tdd: If a read from fsk_serial returns a character that is greater then 32,
an attempt to read past one of the statically defined arrays containing the
values that character maps to would occur.
* localtime: struct ast_time and tm are not the same size - ast_time is larger,
although it contains the elements of tm within it in the same layout. Hence,
when using memcpy to copy the contents of tm into ast_time, the size of tm
should be used, as opposed to the size of ast_time.
* extconf: this treats ast_timing's minmask array as if it had a length of 48,
when it has defined the size of the array as 24. pbx.h defines minmask as
having a size of 48.
(issue ASTERISK-19668)
Reported by: Matt Jordan
........
Merged revisions 362485 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 362496 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362497 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch addresses a number of modules in main that did not handle the
negative return value from function calls adequately, or were not sufficiently
clear that the conditions leading to improper handling of the return values
could not occur. This includes:
* asterisk.c: A negative return value from the read function would be used
directly as an index into a buffer. We now check for success of the read
function prior to using its result as an index.
* manager.c: Check for failures in mkstemp and lseek when handling the
temporary file created for processing data returned from a CLI command in
action_command. Also check that the result of an lseek is sanitized prior
to using it as the size of a memory map to allocate.
(issue ASTERISK-19655)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/1863/
........
Merged revisions 362359 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 362360 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362361 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ASTERISK-18809 eliminated the legacy macro invocation of the stdexten in
favor of the Gosub method without a means of backwards compatibility.
(issue ASTERISK-18809)
(closes issue ASTERISK-19457)
Reported by: Matt Jordan
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/1855/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@361998 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Everything still compiled after making these changes, so I assume these
whitespace-only changes didn't break anything (and shouldn't have).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@360190 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change permits each verbose destination (consoles, logger) to have its
own concept of what the verbosity level is. The big feature here is that
the logger will now be able to capture a particular verbosity level without
condemning each console to need to suffer that level of verbosity.
Additionally, a stray 'core set verbose' will no longer change what will go
to the log.
Review: https://reviewboard.asterisk.org/r/1599/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@355413 65c4cc65-6c06-0410-ace0-fbb531ad65f3
OpenBSD defines SO_PEERCRED, but it returns a 'struct sockpeercred', not
'struct ucred', which causes compilation of main/asterisk.c to fail in
read_credentials(). This allows configure to check for sockpeercred and
asterisk to deal with it properly.
(closes issue ASTERISK-18929)
Reported-by: Barry Miller
Patch-by: Barry Miller
........
Merged revisions 350730 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 350731 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@350732 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The Asterisk -x command line parameter is documented inconsistently.
* Made the -x documentation and behavior consistent.
* Since this is also a new year, updated the copyright notices while here.
(closes issue ASTERISK-19094)
Reported by: Eugene
Patches:
issueA19094_correct_asterisk_option_x.patch (license #5674) patch uploaded by Walter Doekes (modified)
Tested by: Eugene
........
Merged revisions 350075 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 350076 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@350077 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When catching a signal, in no fork mode the console thread is identical to the thread
responsible for catching the signal and closing Asterisk, which requires it to first
dispense with the console thread. Prior to this patch, if these threads were identical,
upon receiving a killing signal, the thread will send an URG signal to itself, which
we also catch and then promptly do nothing with. Obviously this isn't useful behavior.
(closes issue ASTERISK-19127)
Reported By: Bryon Clark
Patches:
quit_on_signals.patch uploaded by Bryon Clark (license 6157)
........
Merged revisions 349672 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 349673 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@349674 65c4cc65-6c06-0410-ace0-fbb531ad65f3
During testing, it was discovered that there were a number of side effects
introduced by r346391 and subsequent check-ins related to it (r346429,
r346617, and r346655). This included the /main/stdtime/ test 'hanging',
as well as the remote console option failing to receive the appropriate output
after a period of time.
I only backed out the changes to main/ and utils/, as this was adequate
to reverse the behavior experienced.
(issue ASTERISK-18974)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@347997 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r332101 | rmudgett | 2011-08-16 12:17:28 -0500 (Tue, 16 Aug 2011) | 140 lines
Merged revisions 332100 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r332100 | rmudgett | 2011-08-16 11:31:36 -0500 (Tue, 16 Aug 2011) | 133 lines
Fix multiple parking issues.
JIRA ASTERISK-17183
Multi-parkinglot directs calls to wrong parkinglot.
JIRA ASTERISK-17870
Cannot retrieve parked calls.
JIRA ASTERISK-17430
ParkedCall() with no extension should pickup first available call and does not.
JIRA AST-576
Issues with parking lots
* Removed searching for parking lots by extension. Parking lots can only
be found by the parking lot name since parking lot access extensions and
spaces are not guaranteed to be unique.
* Added parking_lot_name option to the Park and ParkedCall applications.
Updated documentation for Park and ParkedCall applications.
* Add parkext_exclusive configuration option to make parking entry
extensions specify which parking lot they access.
(closes issue ASTERISK-17183)
Reported by: David Cabrejos
Tested by: rmudgett, David Cabrejos
(closes issue ASTERISK-17870)
Reported by: Remi Quezada
(closes issue ASTERISK-17430)
Reported by: Philippe Lindheimer
JIRA ASTERISK-17452
Parking_offset not used
JIRA AST-624
'next' setting for findslot does nothing
* Reimplemented since findslot feature option broken by -r114655.
(closes issue ASTERISK-17452)
Reported by: David Woolley
Tested by: rmudgett
JIRA ASTERISK-15792
Dialplan continues execution after transfer to park.
This happens for DTMF attended transfer, DTMF blind transfer, and DTMF
one-touch-parking if the party initiating these features also initiated
the call.
* Fixed the return code from the affected builtin features when parking a
call.
(closes issue ASTERISK-15792)
Reported by: Mat Murdock
Tested by: rmudgett, twilson
JIRA AST-607
The courtesytone is not playing to the expected call when picking up a
parked call.
This is mostly a documentation problem. However, the option is not reset
to the default when features.conf is reloaded.
* Updated features.conf.sample documentation for courtesytone and
parkedplay options.
* Reset the parkedplay option to default when features.conf is reloaded.
JIRA AST-615
AMI Park action followed by features reload results in orphaned channels
in parking lot.
* Reloading features.conf will not touch parking lots that have calls
still parked in them. Reload again at a later time.
Misc additional fixes:
* Added unit test for parking lot dialplan usage checking.
* Made update connected line when a parked call is retrieved from a
parking lot.
* Made retrieved parked call stop ringing or MOH depending upon how the
call was waiting in the parking lot.
* Made CLI "features show" indicate if the parking lot is enabled for use.
* Added PARKINGDYNEXTEN channel variable to allow dynamic parking lots to
specify the parking lot access extension.
* Made AMI ParkedCalls action ParkedCall events have a Parkinglot header.
* Made AMI ParkedCalls action ParkedCallsComplete event have a Total
header.
* Fixed potential deadlock from AMI Park action holding channel locks
while calling masq_park_call().
* Fixed several places where ast_strdupa() were used inside of loops.
(Mostly fixed by refactoring the loop body into its own function.)
* Fixed copy_parkinglot() copying too much from the source parking lot.
Extracted the parking lot configuration settings into struct
parkinglot_cfg.
* Refactored courtesytone playing code to put the channel not playing the
tone in autoservice.
* Fix when pbx-parkingfailed is played that the other channel is put in
autoservice if it exists.
* Fixed parkinglot reference leak in parked_call_exec() error paths.
* Fixed parkinglot_unref() use of parkinglot after it was unreffed.
* Made destroy the struct ast_parkinglot parkings lock when done.
* Refactored the features.conf parking lot configuration code to eliminate
redundancy.
* Fixed feature reload to better protect parking lots.
* Fixed parking lot container reference leak in handle_parkedcalls().
* Fixed the total count in handle_parkedcalls().
Review: https://reviewboard.asterisk.org/r/1358/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@332117 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There were some bugs in the very ancient version of Berkeley DB that Asterisk
used. Instead of spending the time tracking down the bugs in the Berkeley code
we move to the much better documented SQLite 3.
Conversion of the old astdb happens at runtime by running the included
astdb2sqlite3 utility. The ast_db API with SQLite 3 backend should behave
identically to the old Berkeley backend, but in the future we could offer a
much more robust interface.
We do not include the SQLite 3 library in the source tree, but instead rely
upon the distribution-provided libraries. SQLite is so ubiquitous that this
should not place undue burden on administrators.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@326589 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r324955 | tilghman | 2011-06-27 11:30:50 -0500 (Mon, 27 Jun 2011) | 5 lines
Save and restore errno from within signal handlers.
This is recommended by the POSIX standard, as well as by the sigaction(2) manpage
for various platforms that we support (e.g. Mac OS X).
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@324961 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk now has protocol independent support for processing text messages
outside of a call. Messages are routed through the Asterisk dialplan.
SIP MESSAGE and XMPP are currently supported. There are options in sip.conf
and jabber.conf that enable these features.
There is a new application, MessageSend(). There are two new functions,
MESSAGE() and MESSAGE_DATA(). Documentation will be available on
the project wiki, wiki.asterisk.org.
Thanks to Terry Wilson for the assistance with development and to David Vossel
for helping with some additional testing.
Review: https://reviewboard.asterisk.org/r/1042/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@321546 65c4cc65-6c06-0410-ace0-fbb531ad65f3
I excluded the part of this patch that used the HOME environment variable since
the built-in editline library goes to great lengths to disallow that. Instead
only settings the EDITRC environment variable will use a user specified file.
Also, the default environment variable use to determine the edit more is
AST_EDITMODE instead of AST_EDITOR (although the latter is still supported).
(closes issue #15929)
Reported by: kkm
Patches:
astcli-editrc-v2.diff uploaded by kkm (license 888)
015929-astcli-editrc-trunk.240324.diff uploaded by kkm (license 888)
Tested by: seanbright
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@317395 65c4cc65-6c06-0410-ace0-fbb531ad65f3
-Functional changes
1. Dynamic global format list build by codecs defined in codecs.conf
2. SILK 8khz, 12khz, 16khz, and 24khz with custom attributes defined in codecs.conf
3. Negotiation of SILK attributes in chan_sip.
4. SPEEX 32khz with translation
5. SLINEAR 8khz, 12khz, 24khz, 32khz, 44.1khz, 48khz, 96khz, 192khz with translation
using codec_resample.c
6. Various changes to RTP code required to properly handle the dynamic format list
and formats with attributes.
7. ConfBridge now dynamically jumps to the best possible sample rate. This allows
for conferences to take advantage of HD audio (Which sounds awesome)
8. Audiohooks are no longer limited to 8khz audio, and most effects have been
updated to take advantage of this such as Volume, DENOISE, PITCH_SHIFT.
9. codec_resample now uses its own code rather than depending on libresample.
-Organizational changes
Global format list is moved from frame.c to format.c
Various format specific functions moved from frame.c to format.c
Review: https://reviewboard.asterisk.org/r/1104/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@308582 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r307536 | qwell | 2011-02-10 16:39:30 -0600 (Thu, 10 Feb 2011) | 22 lines
Merged revisions 307535 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r307535 | qwell | 2011-02-10 16:35:49 -0600 (Thu, 10 Feb 2011) | 15 lines
Merged revisions 307534 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r307534 | qwell | 2011-02-10 16:33:09 -0600 (Thu, 10 Feb 2011) | 8 lines
Remove color when executing commands via a remote console.
Essentially this makes '-x' imply '-n' on rasterisk. This was done in a
different and incomplete way previously, which I'm reverting here.
(issue #18776)
Reported by: alecdavis
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@307537 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is the foundation of an entire new way of looking at media in Asterisk.
The code present in this patch is everything required to complete phase1 of my
Media Architecture proposal. For more information about this project visit the link below.
https://wiki.asterisk.org/wiki/display/AST/Media+Architecture+Proposal
The primary function of this patch is to convert all the usages of format
bitfields in Asterisk to use the new format and format_cap APIs. Functionally
no change in behavior should be present in this patch. Thanks to twilson
and russell for all the time they spent reviewing these changes.
Review: https://reviewboard.asterisk.org/r/1083/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306010 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Already had the pthread ID which is not the same. The most obvious enhancement
is in the "core show threads" output. As stated in the utils header, if the
platform isn't supported -1 is reported (instead of the process ID previously).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@298137 65c4cc65-6c06-0410-ace0-fbb531ad65f3
by splitting up devices from hints into an own ao2_container the callback to
get these devices for statechange handling is faster.
with this changes the length of a device used in a hint isnt longer restricted
to 80 characters.
Tests showed that calling handle_statechange is 40 times faster if no hints
are used and 25 times faster if there are any hints.
(closes issue #17928)
Reported by: mdu113
Tested by: schmidts
Review: https://reviewboard.asterisk.org/r/1003/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@296752 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r296534 | tilghman | 2010-11-29 01:28:44 -0600 (Mon, 29 Nov 2010) | 20 lines
Merged revisions 296533 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r296533 | tilghman | 2010-11-29 01:27:09 -0600 (Mon, 29 Nov 2010) | 13 lines
I love standards. There are so many to choose from. Except when there isn't one.
Linux and *BSD disagree on the elements within the ucred structure. Detect
which one is in use on the system.
(closes issue #18384)
Reported by: bjm
Patches:
cred-diffs uploaded by bjm (license 473)
20101127__issue18384__1.6.2.diff.txt uploaded by tilghman (license 14)
20101127__issue18384__1.8.diff.txt uploaded by tilghman (license 14)
Tested by: tilghman, bjm
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@296535 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r290864 | jpeeler | 2010-10-07 21:56:24 -0500 (Thu, 07 Oct 2010) | 23 lines
Merged revisions 290863 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r290863 | jpeeler | 2010-10-07 21:45:44 -0500 (Thu, 07 Oct 2010) | 16 lines
Merged revisions 290862 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r290862 | jpeeler | 2010-10-07 21:35:29 -0500 (Thu, 07 Oct 2010) | 9 lines
Ensure editline cleanup occurs when Ctrl-C is pressed at control console.
A recent change was made to avoid a race condition on shutdown which only called
the end functions from the console thread. However, when pressing Ctrl-C the
quit handler is called from the signal handler thread.
(closes issue #17698)
Reported by: jmls
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@290865 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r288341 | russell | 2010-09-22 11:45:18 -0500 (Wed, 22 Sep 2010) | 25 lines
Merged revisions 288340 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r288340 | russell | 2010-09-22 11:44:13 -0500 (Wed, 22 Sep 2010) | 18 lines
Merged revisions 288339 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r288339 | russell | 2010-09-22 11:39:16 -0500 (Wed, 22 Sep 2010) | 11 lines
Fix a 100% CPU consumption problem when setting console=yes in asterisk.conf.
The handling of -c and console=yes should be the same, but they were not.
When you specify -c, it sets both a flag for console module and for asterisk
not to fork() off into the background. The handling of console=yes only set
console mode, so you would end up with a background process() trying to run
the Asterisk console and freaking out since it didn't have anything to read
input from.
Thanks to beagles for reporting and helping debug the problem!
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@288342 65c4cc65-6c06-0410-ace0-fbb531ad65f3