After 5 years in mantis and over a year on reviewboard, SRTP support is finally
being comitted. This includes generic CHANNEL dialplan functions that work for
getting the status of whether a call has secure media or signaling as defined
by the underlying channel technology and for setting whether or not a new
channel being bridged to a calling channel should have secure signaling or
media. See doc/tex/secure-calls.tex for examples.
Original patch by mikma, updated for trunk and revised by me.
(closes issue #5413)
Reported by: mikma
Tested by: twilson, notthematrix, hemanshurpatel
Review: https://reviewboard.asterisk.org/r/191/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@268894 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk Generic AOC Representation
- Generic AOC encode/decode routines.
(Generic AOC must be encoded to be passed on the wire in the AST_CONTROL_AOC frame)
- AST_CONTROL_AOC frame type to represent generic encoded AOC data
- Manager events for AOC-S, AOC-D, and AOC-E messages
Asterisk App Support
- app_dial AOC-S pass-through support on call setup
- app_queue AOC-S pass-through support on call setup
AOC Unit Tests
- AOC Unit Tests for encode/decode routines
- AOC Unit Test for manager event representation.
SIP AOC Support
- Pass-through of generic AOC-D and AOC-E messages to snom phones via the
snom AOC specification.
- Creation of chan_sip page3 flags for the addition of the new
'snom_aoc_enabled' sip.conf option.
IAX AOC Support
- Natively supports AOC pass-through through the use of the new
AST_CONTROL_AOC frame type
DAHDI AOC Support
- ETSI PRI full AOC Pass-through support
- 'aoc_enable' chan_dahdi.conf option for independently enabling
pass-through of AOC-S, AOC-D, AOC-E.
- 'aoce_delayhangup' option for retrieving AOC-E on disconnect.
- DAHDI A() dial string option for requesting AOC services.
example usage:
;requests AOC-S, AOC-D, and AOC-E on call setup
exten=>1111,1,Dial(DAHDI/g1/1112/A(s,d,e))
Review: https://reviewboard.asterisk.org/r/552/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@267096 65c4cc65-6c06-0410-ace0-fbb531ad65f3
It is possible to connect to the manager interface before all Asterisk modules
are loaded. To ensure that an application does not send AMI actions that might
require a module that has not yet loaded, the application can listen for the
FullyBooted manager event. It will be sent upon connection if all modules have
been loaded, or as soon as loading is complete. The event:
Event: FullyBooted
Privilege: system,all
Status: Fully Booted
Review: https://reviewboard.asterisk.org/r/639/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@265320 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This module implements an abstraction for retrieving and exporting
asterisk data.
Developed by:
Brett Bryant <brettbryant@gmail.com>
Eliel C. Sardanons (LU1ALY) <eliels@gmail.com>
For the Google Summer of code 2009 Project.
Documentation can be found in doxygen format and inside the
header include/asterisk/data.h
Review: https://reviewboard.asterisk.org/r/275/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@258517 65c4cc65-6c06-0410-ace0-fbb531ad65f3
These changes add the ability to run 'make asterisk.txt' just like the existing
'make asterisk.pdf' commands to generate a text document from the TeX files we
have in the doc/tex/ directory. I've also updated a few of the .tex files because
they weren't properly escaping certain characters so they would show up as Unicode
characters (like [U+021C]). Made changes to the configure scripts so it would
detect the catdvi program which is required to convert the .dvi file generated
by latex.
I've also added a few lines to the build_tools/prep_tarball script so that the
text documentation gets generated and added to future tarballs of Asterisk
releases.
(closes issue #17220)
Reported by: lmadsen
Patches:
asterisk.txt.patch uploaded by lmadsen (license 10)
asterisk.txt.patch-v4 uploaded by pabelanger (license 224)
Tested by: lmadsen, pabelanger
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@258351 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r257426 | lmadsen | 2010-04-15 14:40:33 -0500 (Thu, 15 Apr 2010) | 13 lines
Update backtrace.txt documentation.
Update the backtrace.txt documentation so it conforms to the same layout as
other documents we've been working on recently. Additionally, add a bunch of
new information about gathering backtraces for crashes and deadlocks, along
with ways of verifying your file before uploading it. Create a couple of one
line commands for people to generate the files we need.
(closes issue #17190)
Reported by: lmadsen
Patches:
backtrace.txt.patch-2 uploaded by lmadsen (license 10)
Tested by: lmadsen, pabelanger
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@257427 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r256900 | lmadsen | 2010-04-12 12:29:26 -0500 (Mon, 12 Apr 2010) | 15 lines
Add How-To document on collecting debugging info for issues.asterisk.org
Paul Belanger has been helping a lot with bug tracking recently and created
this document that we can now point to when additional debugging information
is required. This document will help those filing issues to know how to get
the information required when filing their issues. This will make things
easier on the developers.
Initial text and changes by pabelanger. Tweaks and editing by myself.
(closes issue #17159)
Reported by: pabelanger
Patches:
HOWTO_collect_debug_information.txt.patch uploaded by lmadsen (license 10)
Tested by: tzafrir, pabelanger, lmadsen
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@256901 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In troff '-' is used for a hyphen. A minus is denoted by '\-' . This is
normally also used for a dash.
This patch converts all '-'-s that are minuses or dashes to '\-'.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@256704 65c4cc65-6c06-0410-ace0-fbb531ad65f3
From Reviewboard:
CCSS stands for Call Completion Supplementary Services. An admittedly out-of-date
overview of the architecture can be found in the file doc/CCSS_architecture.pdf
in the CCSS branch. Off the top of my head, the big differences between what is
implemented and what is in the document are as follows:
1. We did not end up modifying the Hangup application at all.
2. The document states that a single call completion monitor may be used across
multiple calls to the same device. This proved to not be such a good idea
when implementing protocol-specific monitors, and so we ended up using one
monitor per-device per-call.
3. There are some configuration options which were conceived after the document
was written. These are documented in the ccss.conf.sample that is on this
review request.
For some basic understanding of terminology used throughout this code, see the
ccss.tex document that is on this review.
This implements CCBS and CCNR in several flavors.
First up is a "generic" implementation, which can work over any channel technology
provided that the channel technology can accurately report device state. Call
completion is requested using the dialplan application CallCompletionRequest and can
be canceled using CallCompletionCancel. Device state subscriptions are used in order
to monitor the state of called parties.
Next, there is a SIP-specific implementation of call completion. This method uses the
methods outlined in draft-ietf-bliss-call-completion-06 to implement call completion
using SIP signaling. There are a few things to note here:
* The agent/monitor terminology used throughout Asterisk sometimes is the reverse of
what is defined in the referenced draft.
* Implementation of the draft required support for SIP PUBLISH. I attempted to write
this in a generic-enough fashion such that if someone were to want to write PUBLISH
support for other event packages, such as dialog-state or presence, most of the effort
would be in writing callbacks specific to the event package.
* A subportion of supporting PUBLISH reception was that we had to implement a PIDF
parser. The PIDF support added is a bit minimal. I first wrote a validation
routine to ensure that the PIDF document is formatted properly. The rest of the
PIDF reading is done in-line in the call-completion-specific PUBLISH-handling
code. In other words, while there is PIDF support here, it is not in any state
where it could easily be applied to other event packages as is.
Finally, there are a variety of ISDN-related call completion protocols supported. These
were written by Richard Mudgett, and as such I can't really say much about their
implementation. There are notes in the CHANGES file that indicate the ISDN protocols
over which call completion is supported.
Review: https://reviewboard.asterisk.org/r/523
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@256528 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Add same changes as commit to 1.4, but convert to TeX.
(issue #16963)
Reported by: kobaz
Patches:
localchannel-2.txt uploaded by kobaz (license 834)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@253256 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A complete re-write of the Local channel documentation has been performed, with
the existing information from localchannel.txt and localchannel.tex merged in.
(closes issue #16637)
Reported by: kobaz
Patches:
localchannel.tex uploaded by lmadsen (license 10)
localchannel.txt uploaded by lmadsen (license 10)
Tested by: lmadsen, jsmith, mmichelson
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@250609 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Update the IMAP documentation to make it clear that storing voicemails
in the same folder as a large number of emails could potentially cause
significant slow downs when writing or retrieving voicemails.
(issue #16704)
Reported by: TimeHider
Tested by: lmadsen, TimeHider
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@250051 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Rewrote a large portion of the existing documentation
and added information about the TCP/IP socket interface
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@240973 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Add a how-to set of documentation about building queues with Asterisk.
This documentation is based on Asterisk 1.6.2 but should work on most
versions with minor modifications.
(closes issue #16237)
Reported by: lmadsen
Patches:
Building Queues (FINAL).txt uploaded by lmadsen (license 10)
Tested by: pdhales, lmadsen, cmdrwalrus
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@240039 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Also add an XXX comment that I'm baffled nobody has ever complained about. We
say "first message", and then we go into language-specific stuff where we
proceed to say..."first message".
(closes issue #15053)
Reported by: dinhtrung
Patches:
vietnamese.ods uploaded by dinhtrung (license 776)
app_voicemail.c.diff uploaded by dinhtrung (license 776)
(closes issue #15626)
Reported by: dinhtrung
Patches:
say.c.diff uploaded by dinhtrung (license 776)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@237050 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Update the IMAP build documentation to show how to build on 64-bit
platforms.
(issue #16433)
Reported by: shrift
Tested by: lmadsen
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@234631 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This option can be used to enable #exec support in the asterisk.conf configuration file.
(closes issue #16260)
Reported by: atis
Patches:
exec_includes.patch uploaded by atis (license 242)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@232510 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r229191 | diruggles | 2009-11-10 12:23:59 -0500 (Tue, 10 Nov 2009) | 11 lines
Document ExternalIVR event tag collision
ExternalIVR uses the D tag for two different event types. This documents that
behavior and how to differentiate between the two cases. Also includes a minor
spelling fix and clarification
(closes issue #16211)
Reported by: thedavidfactor
Patches:
externalivr.txt.20091109.1507.patch uploaded by thedavidfactor (license 903)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@229228 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r225484 | lmadsen | 2009-10-22 16:51:52 -0500 (Thu, 22 Oct 2009) | 11 lines
Clean valgrind output by suppressing false errors.
Update valgrind.txt documentation and add valgrind.supp file in order to
allow those who are creating valgrind output to have less false errors in
the logfile.
(closes issue #16007)
Reported by: atis
Patches:
valgrind.txt.diff uploaded by atis (license 242)
asterisk2.supp uploaded by atis (license 242)
Tested by: atis, amorsen
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@225485 65c4cc65-6c06-0410-ace0-fbb531ad65f3
JABBER_RECEIVE (along with JabberSend) makes Asterisk interact with users over
XMPP to process calls.
SendText can be used instead of JabberSend in the context of XMPP based voice
channels (chan_gtalk and chan_jingle).
(closes issue #12569)
Reported by: eech55
Tested by: phsultan, asannucci, lmadsen, jtodd, maxgo
Review: https://reviewboard.asterisk.org/r/88/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@220457 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For new readers: The janitor list is a list of tasks we need help with in the Asterisk project. Taking up
one of these is often a good way to get into Asterisk development and getting a lot of developers in
the project to be grateful. It's stuff we could spend time on when the bug tracker is empty, when our
employers hasn't filled our task lists and our servers is running bugfree and happily without any issues.
If you want to start working on one of these small projects, feel free to ask for help in the #asterisk-dev
channel on IRC or asterisk-dev mailing list. We'll be more than happy to help you to start and reach
goal.
Thank you for your help.
</end of long commit message>
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@216335 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds a document describing the language prompt submission process,
licensing terms and other issues related to that process. In addition, it
modifies the sound file searching process to support language codes with
any number of suffices (not limited to just "xx" or "xx_YY"), so that prompts
can be named with gender, customer/company, etc. suffices as well.
(closes issue #15771)
Reported by: jtodd
Patches:
language-criteria.txt uploaded by jtodd
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@216006 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r210563 | lmadsen | 2009-08-05 13:46:21 -0500 (Wed, 05 Aug 2009) | 11 lines
Update imapstorage.txt documentation.
Updated the imapstorage.txt documentation to reflect that issues with
c-client versions older than 2007 seem to cause crashing issues that
are not seen with more recent versions. Documentation has been updated
to reflect this.
(closes issue #14496)
Reported by: vbcrlfuser
Patches:
__20090727-imap-documentation-patch.txt uploaded by lmadsen (license 10)
Tested by: lmadsen, mmichelson, dbrooks
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@210564 65c4cc65-6c06-0410-ace0-fbb531ad65f3
It is clear from multiple mailing list, forum, wiki and other sorts of posts
that users don't really understand the effects that the 'canreinvite' config
option actually has, and that in some cases they think that setting it to 'no'
will actually cause various other features (T.38, MOH, etc.) to not work properly,
when in fact this is not the case. This patch changes the proper name of the
option to what it should have been from the beginning ('directmedia'), but
preserves backwards compatibility for existing configurations.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@210190 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r207647 | kpfleming | 2009-07-21 08:04:44 -0500 (Tue, 21 Jul 2009) | 12 lines
Ensure that user-provided CFLAGS and LDFLAGS are honored.
This commit changes the build system so that user-provided flags (in ASTCFLAGS
and ASTLDFLAGS) are supplied to the compiler/linker *after* all flags provided
by the build system itself, so that the user can effectively override the
build system's flags if desired. In addition, ASTCFLAGS and ASTLDFLAGS can now
be provided *either* in the environment before running 'make', or as variable
assignments on the 'make' command line. As a result, the use of COPTS and LDOPTS
is no longer necessary, so they are no longer documented, but are still supported
so as not to break existing build systems that supply them when building Asterisk.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@207680 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit introduces the security events API. This API is to be used by
Asterisk components to report events that have security implications.
A simple example is when a connection is made but fails authentication. These
events can be used by external tools manipulate firewall rules or something
similar after detecting unusual activity based on security events.
Inside of Asterisk, the events go through the ast_event API. This means that
they have a binary encoding, and it is easy to write code to subscribe to these
events and do something with them.
One module is provided that is a subscriber to these events - res_security_log.
This module turns security events into a parseable text format and sends them
to the "security" logger level. Using logger.conf, these log entries may be
sent to a file, or to syslog.
One service, AMI, has been fully updated for reporting security events.
AMI was chosen as it was a fairly straight forward service to convert.
The next target will be chan_sip. That will be more complicated and will
be done as its own project as the next phase of security events work.
For more information on the security events framework, see the documentation
generated from doc/tex/. "make asterisk.pdf"
Review: https://reviewboard.asterisk.org/r/273/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@206021 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Someone asked yesterday, "is there a good reason why we can't just put these
modules in Asterisk?". After a brief discussion, as long as the modules are
clearly set aside in their own directory and not enabled by default, it is
perfectly fine.
For more information about why a module goes in addons, see README-addons.txt.
chan_ooh323 does not currently compile as it is behind some trunk API updates.
However, it will not build by default, so it should be okay for now.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@204413 65c4cc65-6c06-0410-ace0-fbb531ad65f3
CEL is the new system for logging channel events. This was inspired after
facing many problems trying to represent what is possible to happen to a call
in Asterisk using CDR records. For more information on CEL, see the built in
HTML or PDF documentation generated from the files in doc/tex/.
Many thanks to Steve Murphy (murf) and Brian Degenhardt (bmd) for their hard
work developing this code. Also, thanks to Matt Nicholson (mnicholson) and
Sean Bright (seanbright) for their assistance in the final push to get this
code ready for Asterisk trunk.
Review: https://reviewboard.asterisk.org/r/239/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@203638 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fix up modules in the 'apps' directory, and also correct the bad example of
enum definitions in include/asterisk/app.h, which many developers followed
(thanks for reading the documentation!). In addition, add some basic usage
examples of the 'pahole' and 'pglobal' tools to the coding guidelines.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@200656 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When connected line updates are received or generated in the middle
of an application call, it is now possible to execute a macro to
manipulate the connected line data. This way, phone numbers may be
manipulated to be more presentable to users, names may be changed
for...whatever reason, or whatever else needs to be done may be.
Review: https://reviewboard.asterisk.org/r/256
AST-165
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@198727 65c4cc65-6c06-0410-ace0-fbb531ad65f3
I still need to set up tests to make sure my examples are completely correct,
but I ran out of time tonight and felt that they at least would give an idea as
to how to use calendaring. I will try to test the examples and do some cleanup
on the docs tomorrow night.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@197926 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A new xml element was created to manage the AMI actions documentation,
using AstXML.
To register a manager action using XML documentation it is now possible
using ast_manager_register_xml().
The CLI command 'manager show command' can be used to show the parsed
documentation.
Example manager xml documentation:
<manager name="ami action name" language="en_US">
<synopsis>
AMI action synopsis.
</synopsis>
<syntax>
<xi:include xpointer="xpointer(...)" /> <-- for ActionID
<parameter name="header1" required="true">
<para>Description</para>
</parameter>
...
</syntax>
<description>
<para>AMI action description</para>
</description>
<see-also>
...
</see-also>
</manager>
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@196308 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Avoid duplicating xml documentation by allowing to include other parts of
the xml documentation using XInclude.
Example:
<xi:include xpointer="xpointer(/docs/function[@name='CHANNEL']/synopsis)" />
(Insert this line to include the synopsis of the CHANNEL function xml
documentation).
It is also possible to include documentation from other files in the
'documentation/' directory using the href="" attribute inside a xinclude
element.
(closes issue #15107)
Reported by: lmadsen
(issue #14444)
Reported by: ewieling
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@194982 65c4cc65-6c06-0410-ace0-fbb531ad65f3
It was not possible to use an enumlist inside an enum:
<enumlist>
<enum name="aa">
<enumlist>
...
</enumlist>
</enum>
</enumlist>
Now we will be able to insert as many levels as we want.
(closes issue #15112)
Reported by: lmadsen
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@194635 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This would allow for one to add a caller to a specific place in the
queue instead of just placing the caller in the back every time. To help
facilitate some interesting manipulations, a new channel variable called
QUEUEPOSITION has been added. When a caller is removed from a queue, his
position in that queue is stored in the QUEUEPOSITION variable. One such
strategy an administrator can employ is to allow for the removal of a caller
from one queue followed by the insertion of the same caller into a separate
queue in the same position.
Review: http://reviewboard.digium.com/r/189
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@190626 65c4cc65-6c06-0410-ace0-fbb531ad65f3
a dialplan variable.
This adds a dialplan variable (SIP_CODEC_OUTBOUND) which controls
the codec offered for an outgoing SIP call. This is much like the
SIP_CODEC dialplan variable and has the same restrictions. The codec
set must be one that is configured for the call.
(closes issue #13243)
Reported by: samdell3
Patches:
13243.diff uploaded by file (license 11)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@186624 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This document specifies the timing modules available in Asterisk beginning
with Asterisk 1.6.1. The document goes into detail about the differences
between each and gives a general overview of what timing is used for in
Asterisk. There is also a section which can be used to help customize
your setup or to troubleshoot timing issues you may have.
I also added messages to the DAHDI timing test used in res_timing_dahdi.c
that points to this new documentation if people experience problems.
Big thanks to all who contributed comments on this.
(closes issue #14490)
Reported by: mmichelson
Patches:
timing.txt uploaded by mmichelson (license 60)
Review: http://reviewboard.digium.com/r/164/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@179937 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Manager command "iaxpeers" now shows if a link is trunked and encrypted. Instead of encryption saying simply "yes" or "no", it now displays what type of encryption is enabled and if keyrotation is on or not.
(closes issue #14427)
Reported by: snuffy
Patches:
iax_show_trunks.diff uploaded by snuffy (license 35)
2009022200_iax2_show_trunkencryption.diff.txt uploaded by mvanbaak (license 7)
Tested by: mvanbaak, dvossel, snuffy
Review: http://reviewboard.digium.com/r/173/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@178300 65c4cc65-6c06-0410-ace0-fbb531ad65f3
From a user point-of-view, this adds new CLI commands and Manager Actions to
better facilitate the reloading of queues and the resetting of their statistics.
The new CLI commands are the "queue reload" and "queue reset stats" commands.
The new manager actions are the QueueReload and QueueReset commands.
Review: http://reviewboard.digium.com/r/115
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@175663 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- MeetMe()
- MeetMeCount()
- MeetMeChannelAdmin()
- MeetMeAdmin()
- SLAStation()
- SLATrunk()
- Add an attribute to optionlist 'hasparams' with the same functionality as the one
we have in <parameter> and <argument> (the DTD was updated)
- Fix a leak when getting an attribute while parsing an <optionlist>.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@156575 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A new <agi> element is used to describe the XML documentation.
We have the usual synopsis,syntax,description and seealso for AGI commands.
The CLI 'agi show commands' command was changed to show all the documentation se
ctions.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@156051 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit introduces the first phase of an effort to manage documentation of the
interfaces in Asterisk in an XML format. Currently, a new format is available for
applications and dialplan functions. A good number of conversions to the new format
are also included.
For more information, see the following message to asterisk-dev:
http://lists.digium.com/pipermail/asterisk-dev/2008-October/034968.html
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@153365 65c4cc65-6c06-0410-ace0-fbb531ad65f3
for more details of this command.
(closes issue #13326)
Reported by: ib2
Patches:
bug13326_trunk_20080822.diff uploaded by snuffy (license 35)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@150311 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: nickpeirson
Patches:
pbx.c.patch uploaded by nickpeirson (license 579)
replace_bzero+bcopy.patch uploaded by nickpeirson (license 579)
Tested by: nickpeirson, murf
1. replaced all refs to bzero and bcopy to memset and memmove instead.
2. added a note to the CODING-GUIDELINES
3. add two macros to asterisk.h to prevent bzero, bcopy from creeping
back into the source
4. removed bzero from configure, configure.ac, autoconfig.h.in
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@147807 65c4cc65-6c06-0410-ace0-fbb531ad65f3
more merge compatible in the mISDN area.
channels/chan_misdn.c
* Eliminated redundant code in cb_events() EVENT_SETUP
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@145200 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Made bearer2str() use allowed_bearers_array[]
* Made use the causes.h defines instead of hardcoded numbers.
* Made use Asterisk presentation indicator values if either of the
mISDN presentation or screen options are negative.
* Updated the misdn_set_opt application option descriptions.
* Renamed the awkward Caller ID presentation misdn_set_opt
application option value not_screened to restricted.
Deprecated the not_screened option value.
channels/misdn/isdn_lib.c
* Made use the causes.h defines instead of hardcoded numbers.
* Fixed some spelling errors and typos.
* Added all defined facility code strings to fac2str().
channels/misdn/isdn_lib.h
* Added doxygen comments to struct misdn_bchannel.
channels/misdn/isdn_lib_intern.h
* Added doxygen comments to struct misdn_stack.
channels/misdn_config.c
configs/misdn.conf.sample
* Updated the mISDN presentation and screen parameter descriptions.
doc/tex/misdn.tex
* Updated the misdn_set_opt application option descriptions.
* Fixed some spelling errors and typos.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@138738 65c4cc65-6c06-0410-ace0-fbb531ad65f3
respectively. Also, take the opportunity to clean up the CLI prompt
generation code.
(closes issue #13175)
Reported by: eliel
Patches:
cliprompt.patch uploaded by eliel (license 64)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@134353 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r132645 | oej | 2008-07-22 22:10:26 +0200 (Tis, 22 Jul 2008) | 9 lines
The most common question on the #asterisk iRC channel and on mailing lists
seems to be in regards to an error message when retransmit fails. This
is frequently misunderstood as a failure of Asterisk, not a failure of
the network to reach the other party.
This document tries to assist the Asterisk user in sorting out these
issues by explaining the logic and pointing at some possible
causes. Hopefully, we will get other questions now :-)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@132703 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Tilghman Lesher
Paul Belanger
Mark Michelson
Terry Wilson
David Vossel
Richard Mudgett
Leif Madsen
Eliel C. Sardanons
Russell Bryant
Julian Lyndon-Smith
Tzafrir Cohen
David Ruggles
TransNexus OSP Development
Jason Parker
Joshua Colp
Sean Bright
Kevin P. Fleming
Philippe Sultan
Olle Johansson
Michiel van Baak
Jeff Peeler
Bradley Latus
Gavin Henry
BJ Weschke
Steve Murphy