In an earlier version of Asterisk a local channel [un]lock all functions were
added in order to keep a crash from occurring when a channel hung up too early
during an attended transfer. Unfortunately, when a transfer failure occurs and
depending on the timing, the local channels sometime do not get properly
unlocked and deref'ed after being locked and ref'ed. This happens because the
underlying local channel structure gets NULLed out before unlocking.
This patch reworks those [un]lock functions and makes sure the values that get
locked and ref'ed later get unlocked and deref'ed.
ASTERISK-27074 #close
Change-Id: Ice96653e29bd9d6674ed5f95feb6b448ab148b09
* changes:
SDP: Set the remote c= line in RTP instance.
SDP: Add t= line in sdp_create_from_state()
stream: Ignore declined streams for some topology calls.
This option was added to control whether to notify dialog-info state
'early' or 'confirmed' on Ringing when already INUSE.
The value "yes" is useful for some SIP phones (Cisco SPA)
to be able to indicate and pick up ringing devices.
ASTERISK-26919 #close
Change-Id: Ie050bc30023543c7dfb4365c5be3ce58c738c711
The recent change to make the use of LOAD_DECLINE more consistent
caused res_ari to unload itself before declining if the ari.conf
file wasn't found. The ari stubs though still tried to use the
configuration resulting in segfaults.
This patch creates a new CHECK_ARI_MODULE_LOADED macro which tests
to see if res_ari is actually loaded and causes the stubs to also
decline if it isn't. The macro was then added to the mustache
template's "load_module" function.
ASTERISK-27026 #close
Reported-by: Ronald Raikes
Change-Id: I263d56efa628ee3c411bdcd16d49af6260c6c91d
* Made ast_format_cap_from_stream_topology() not include any formats from
declined streams.
* Made ast_stream_topology_get_first_stream_by_type() ignore declined
streams to return the first active stream of the type.
* Updated unit tests to check these changes have the expected effect.
Change-Id: Iabbc6a3e8edf263a25fd3056c3c614407c7897df
This change adds a deferred queue to bridging. If a bridge
technology determines that a frame can not be written and
should be deferred it can indicate back to bridging to do so.
Bridging will then requeue any deferred frames upon a new
channel joining the bridge.
This change has been leveraged for T.38 request negotiate
control frames. Without the deferred queue there is a race
condition between the bridge receiving the T.38 request
negotiate and the second channel joining and being in the
bridge. If the channel is not yet in the bridge then the T.38
negotiation fails.
A unit test has also been added that confirms that a T.38
request negotiate control frame is deferred when no other
channel is in the bridge and that it is requeued when a new
channel joins the bridge.
ASTERISK-26923
Change-Id: Ie05b08523f399eae579130f4a5f562a344d2e415
When doing an attended transfer it's possible for the transferer, after
receiving an accepted response from Asterisk, to send a BYE to Asterisk,
which can then be processed before Asterisk has time to start and/or
complete the transfer process. This of course causes the transfer to not
complete successfully, thus dropping the call.
This patch makes it so any BYEs received from the transferer, after the REFER,
that initiate a session end are deferred until the transfer is complete. This
allows the channel that would have otherwise been hung up by Asterisk to
remain available throughout the transfer process.
ASTERISK-27053 #close
Change-Id: I43586db79079457d92d71f1fd993be9a3b409d5a
This introduces the ability for PJSIP code to specify filtering flags
when retrieving PJSIP contacts. The first flag for use causes the
query code to only retrieve contacts that are not unreachable. This
change has been leveraged by both the Dial() process and the
PJSIP_DIAL_CONTACTS dialplan function so they will now only attempt
calls to contacts which are not unreachable.
ASTERISK-26281
Change-Id: I8233b4faa21ba3db114f5a42e946e4b191446f6c
In review 4843 (ASTERISK-24858), we added a hack that forced a smoother
creation when sending signed linear so that the byte order was adjusted
during transmission. This was needed because smoother flags were lost
during the new format work that was done in Asterisk 13.
Rather than rolling that same hack into res_rtp_multicast, re-introduce
smoother flags so that formats can dictate their own options.
Change-Id: I77b835fba0e539c6ce50014a984766f63cab2c16
A previous commit added plumbing to bridge_softmix to allow for an SFU
experience with Asterisk. This commit adds an option to app_confbridge
that allows for a confbridge to actually make use of the SFU video mode.
SFU mode is implemented in a "set it and forget it" kind of way. That
is, when the bridge is created, if SFU mode is enabled, then the video
mode gets set to SFU and cannot be changed. Future improvements may
allow for a hybrid experience (e.g. forward multiple video streams,
specifically those of the most recent talkers), but for this addition,
no such capability is present.
Change-Id: I87bbcb63dec6dbbb42488f894871b86f112b2020
This sets up the "plumbing" in bridge_softmix to
be able to accommodate Asterisk asking as an SFU
(selective forwarding unit) for conferences.
The way this works is that whenever a channel enters or leaves a
conference, all participants in the bridge get sent a stream topology
change request. The topologies consist of the channels' original
topology, along with video destination streams corresponding to each
participants' source video streams. So for instance, if Alice, Bob, and
Carol are in the conference, and each supplies one video stream, then
the topologies for each would look like so:
Alice:
Audio,
Source video(Alice),
Destination Video(Bob),
Destination video (Carol)
Bob:
Audio,
Source video(Bob)
Destination Video(Alice),
Destination video (Carol)
Carol:
Audio,
Source video(Carol)
Destination Video(Alice),
Destination video (Bob)
This way, video that arrives from a source video stream can then be
copied out to the destination video streams on the other participants'
channels.
Once the bridge gets told that a topology on a channel has changed, the
bridge constructs a map in order to get the video frames routed to the
proper destination streams. This is done using the bridge channel's
stream_map.
This change is bare-bones with regards to SFU support. Some key features
are missing at this point:
* Stream limits. This commit makes no effort to limit the number of
streams on a specific channel. This means that if there were 50 video
callers in a conference, bridge_softmix will happily send out topology
change requests to every channel in the bridge, requesting 50+
streams.
* Configuration. The plumbing has been added to bridge_softmix, but
there has been nothing added as of yet to app_confbridge to enable SFU
video mode.
* Testing. Some functions included here have unit tests.
However, the functionality as a whole has only been verified by
hand-tracing the code.
* Selectivenss. For a "selective" forwarding unit, this does not
currently have any means of being selective.
* Features. Presumably, someone might wish to only receive video from
specific sources. There are no external-facing functions at the moment
that allow for users to select who they receive video from.
* Efficiency. The current scheme treats all video streams as being
unidirectional. We could be re-using a source video stream as a
desetnation, too. But to simplify things on this first round, I did it
this way.
Change-Id: I7c44a829cc63acf8b596a337b2dc3c13898a6c4d
...that can only be run by explicitly calling it with
'test execute category /DO_NOT_RUN/ name RAISE_SEGV'
This allows us to more easily test CI and debugging tools that
should do certain things when asterisk coredumps.
To allow this a new member was added to the ast_test_info
structure named 'explicit_only'. If set by a test, the test
will be skipped during a 'test execute all' or
'test execute category ...'.
Change-Id: Ia3a11856aae4887df9a02b6b081cc777b36eb6ed
Added functions that convert a string to an unsigned integer or unsigned long.
A couple of unit test were also created to test the routines. The reasons for
adding these conversion utilities (and hopefully eventually more) are as
follows:
* Conversion routines are functionally contained with consistent and
better error checking
* The function names offer a better description of what is happening
* It encourages code reuse for easier bug fixing at a single source
* It's simpler to use
* It's unit testable
For instance, currently in a lot of places when converting to an integer or
similar the "sscanf" function is used. When using "sscanf" it may not be
immediately clear what's happening as it lacks semantic naming. Limited error
checking is usually done as well. For example, most of the time a check is done
to make sure the value converted, but does not check for overflows or negative
valued conversions when converting unsigned numbers.
Why use/wrap "strtoul" and not "sscanf" then? Primarily, it lacks some of the
built in error handling that "strtoul" has. For instance "strtoul" contains
overflow checks. Less so, but can still factor as reasons, "sscanf" is slightly
more complex in its use. And maybe a bit controversial, but it may be ("big if")
potentially slower than "strtoul" in some cases.
Change-Id: If7eaca4a48f8c7b89cc8b5a1f4bed2852fca82bb
When manipulating flags on a channel the channel has to be
locked to guarantee that nothing else is also manipulating
the flags. This change introduces locking where necessary to
guarantee this. It also adds helper functions that manipulate
channel flags and lock to reduce repeated code.
ASTERISK-26789
Change-Id: I489280662dba0f4c50981bfc5b5a7073fef2db10
* changes:
SDP: Make process possible multiple fmtp attributes per rtpmap.
SDP: Explicitly stop a RTP instance before destoying it.
SDP: Rework merge_capabilities().
SDP: Update ast_get_topology_from_sdp() to keep RTP map.
This option was added to turn off notifying the progress details
on Blind Transfer. If this option is not set then the chan_pjsip
will send NOTIFY "200 OK" immediately after "202 Accepted".
Some SIP phones like Mitel/Aastra or Snom keep the line busy until
receive "200 OK".
ASTERISK-26333 #close
Change-Id: Id606fbff2e02e967c02138457badc399144720f2
When we optionally set the interface_address we are forcing the media to
go out a specific interface address. This allows us to optionally have
the media go out the interface that SIP signalling came in on or if we are
configured to have the media always go out a specific address.
Change-Id: I160d9fac322a075bd2557b430632544178196189
* Made sdp_add_m_from_rtp_stream() and sdp_add_m_from_udptl_stream()
handle generating disabled/declined streams.
* Added /main/sdp/sdp_merge_asymmetric unit test. It currently does not
check the offerer side negotiated SDP because that isn't the purpose of
this patch and there is much to be done to handle declined/dummy streams.
* Added T.38 image streams to the /main/sdp/sdp_merge_symmetric and
/main/sdp/sdp_merge_crisscross unit tests.
Change-Id: Ib4dcb3ca4f9a9133b376f4e3302f9a1f963f2b31
All log messages go to a queue serviced by a single thread
which does all the IO. This setting controls how big that
queue can get (and therefore how much memory is allocated)
before new messages are discarded. The default is 1000.
Should something go bezerk and log tons of messages in a tight
loop, this will prevent memory escalation.
When the limit is reached, a WARNING is logged to that effect
and messages are discarded until the queue is empty again. At
that time another WARNING will be logged with the count of
discarded messages. There's no "low water mark" for this queue
because the logger thread empties the entire queue and processes it
in 1 batch before going back and waiting on the queue again.
Implementing a low water mark would mean additional locking as
the thread processes each message and it's not worth it.
A "test" was added to test_logger.c but since the outcome is
non-deterministic, it's really just a cli command, not a unit
test.
Change-Id: Ib4520c95e1ca5325dbf584c7989ce391649836d1
ast_stream_clone() cannot copy the opaque user data stored on a stream.
We don't know how to clone the data so it isn't copied into the clone.
Change-Id: Ia51321bf38ecbfdcc53787ca77ea5fd2cabdf367
When using the Bridge AMI action on the same channel multiple times
it was possible for the channel to return to the wrong location in
the dialplan if the other party hung up. This happened because the
priority of the channel was not preserved across each action
invocation and it would fail to move on to the next priority in
other cases.
This change makes it so that the priority of a channel is preserved
when taking control of it from another thread and it is incremented
as appropriate such that the priority reflects where the channel
should next be executed in the dialplan, not where it may or may not
currently be.
The Bridge AMI action was also changed to ensure that it too
starts the channels at the next location in the dialplan.
ASTERISK-24529
Change-Id: I52406669cf64208aef7252a65b63ade31fbf7a5a
This patch is the first cut at adding stream support to the bridging framework.
Changes were made to the framework that allows mapping of stream topologies to
a bridge's supported media types.
The first channel to enter a bridge initially defines the media types for a
bridge (i.e. a one to one mapping is created between the bridge and the first
channel). Subsequently added channels merge their media types into the bridge's
adding to it when necessary. This allows channels with different sized
topologies to map correctly to each other according to media type. The bridge
drops any frame that does not have a matching index into a given write stream.
For now though, bridge_simple will align its two channels according to size or
first to join. Once both channels join the bridge the one with the most streams
will indicate to the other channel to update its streams to be the same as that
of the other. If both channels have the same number of streams then the first
channel to join is chosen as the stream base.
A topology change source was also added to a channel when a stream toplogy
change request is made. This allows subsystems to know whether or not they
initiated a change request. Thus avoiding potential recursive situations.
ASTERISK-26966 #close
Change-Id: I1eb5987921dd80c3cdcf52accc136393ca2d4163
The telephone_event option was used as a flag and a bit mapped value in
different places when it is a boolean. It is also inadequate to configure
the DTMF operation of the RTP instance created for the stream.
Change-Id: Ib1addeaf0ce86f07039f2f979cab29405dc5239b
Kevin Harwell
George Joseph
Jenkins2
Alexei Gradinari
Joshua Colp
Richard Mudgett
Sean Bright
Mark Michelson