A lot of whitespace issues have been resolved in this commit
Also some doc updates, but that's only 6 lines
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@118824 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- make data member of the ast_frame struct a named union instead of a void
Recently the ast_queue_hangup function got a new parameter, the hangupcause
Feedback came in that this is no good and that instead a new function should be created.
This I did.
The hangupcause was stored in the seqno member of the ast_frame struct. This is not very
elegant, and since there's already a data member that one should be used.
Problem is, this member was a void *.
Now it's a named union so it can hold a pointer, an uint32 and there's a padding in case someone
wants to store another type in there in the future.
This commit is so massive, because all ast_frame.data uses have to be
altered to ast_frame.data.data
Thanks russellb and kpfleming for the feedback.
(closes issue #12674)
Reported by: mvanbaak
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@117802 65c4cc65-6c06-0410-ace0-fbb531ad65f3
marked "urgent" are considered to be higher priority than other messages
and so they will be played before any other messages in a user's mailbox.
There are two ways to leave an urgent message.
1. send the 'U' option to VoiceMail().
2. Set review=yes in voicemail.conf. This will give instructions for
a caller to mark a message as urgent after the message has been recorded.
I have tested that this works correctly with file and ODBC storage, and James
Rothenberger (who wrote initial support for this feature) has tested its use
with IMAP storage.
(closes issue #11817)
Reported by: jaroth
Based on branch http://svn.digium.com/svn/asterisk/team/jrothenberger/asterisk-urgent
Tested by: putnopvut, jaroth
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@115588 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: oej
Tested by: jpeeler
This patch implements multiple parking lots for parked calls. The default parkinglot is used by default, however setting the channel variable PARKINGLOT in the dialplan will allow use of any other configured parkinglot. See configs/features.conf.sample for more details on setting up another non-default parkinglot. Also, one can (currently) set the default parkinglot to use in the driver configuration file via the parkinglot option.
Patch initially written by oej, brought up to date and finalized by mvanbaak, and then stabilized and converted to astobj2 by me.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114487 65c4cc65-6c06-0410-ace0-fbb531ad65f3
when dialing a channel that does not provide progress (analog ZAP lines)
The phone does handle the double update on calls to channels that do
provide progress and wont insert duplicate items
(closes issue #12239)
Reported by: DEA
Patches:
chan_skinny-call-log.txt uploaded by DEA (license 3)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@109168 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: rizzo
Tested by: murf
Proposal of the changes to be made, and then an announcement of how they were accomplished:
http://lists.digium.com/pipermail/asterisk-dev/2008-February/032065.html
and:
http://lists.digium.com/pipermail/asterisk-dev/2008-March/032124.html
Here is a recap, file by file, of what I have done:
pbx/pbx_config.c
pbx/pbx_ael.c
All funcs that were passed a ptr to the context list, now will ALSO be passed a hashtab ptr to the same set.
Why? because (for the time being), the dialplan is stored in both, to facilitate a quick, low-cost move to
hash-tables to speed up dialplan processing. If it was deemed necessary to pass the context LIST, well, it
is just as necessary to have the TABLE available. This is because the list/table in question might not be
the global one, but temporary ones we would use to stage the dialplan on, and then swap into the global
position when things are ready.
We now have one external function for apps to use, "ast_context_find_or_create()" instead of the pre-existing
"find" and "create", as all existing usages used both in tandem anyway.
pbx_config, and pbx_ael, will stage the reloaded dialplan into local lists and tables, and
then call merge_contexts_and_delete, which will merge (now) existing contexts and
priorities from other registrars into this local set by copying them. Then, merge_contexts_and_delete will
lock down the contexts, swap the lists and tables, and unlock (real quick), and then
destroy the old dialplan.
chan_sip.c
chan_iax.c
chan_skinny.c
All the channel drivers that would add regcontexts now use the ast_context_find_or_create now.
chan_sip also includes a small fix to get rid of warnings about removing priorities that never got entered.
apps/app_meetme.c
apps/app_dial.c
apps/app_queue.c
All the apps that added a context/exten/priority were also modified to use ast_context_find_or_create instead.
include/asterisk/pbx.h
ast_context_create() is removed. Find_or_create_ is the new method.
ast_context_find_or_create() interface gets the hashtab added.
ast_merge_contexts_and_delete() gets the local hashtab arg added.
ast_wrlock_contexts_version() is added so you can detect if someone else got a writelock between your readlocking and writelocking.
ast_hashtab_compare_contexts was made public for use in pbx_config/pbx_ael
ast_hashtab_hash_contexts was in like fashion make public.
include/asterisk/pval.h
ast_compile_ael2() interface changed to include the local hashtab table ptr.
main/features.c
For the sake of the parking context, we use ast_context_find_or_create().
main/pbx.c
I changed all the "tree" names to "table" instead. That's because the original
implementation was based on binary trees. (had a free library). Then I moved
to hashtabs. Now, the names move forward too.
refcount field added to contexts, so you can keep track of how many modules
wanted this context to exist.
Some log messages that are warnings were inflated from LOG_NOTICE to LOG_WARNING.
Added some calls to ast_verb(3,...) for debug messages
Lots of little mods to ast_context_remove_extension2, which is now excersized in ways
it was not previously; one definite bug fixed.
find_or_create was upgraded to handle both local lists/tables as well as the globals.
context_merge() was added to do the per-context merging of the old/present contexts/extens/prios into the new/proposed local list/tables
ast_merge_contexts_and_delete() was heavily modified.
ast_add_extension2() was also upgraded to handle changes.
the context_destroy() code was re-engineered to handle the new way of doing things,
by exten/prio instead of by context.
res/ael/pval.c
res/ael/ael.tab.c
res/ael/ael.tab.h
res/ael/ael.y
res/ael/ael_lex.c
res/ael/ael.flex
utils/ael_main.c
utils/extconf.c
utils/conf2ael.c
utils/Makefile
Had to change the interface to ast_compile_ael2(), to include the hashtab ptr.
This ended up involving several external apps. The main gotcha was I had to
include lock.h and hashtab.h in several places.
As a side note, I tested this stuff pretty thoroughly, I replicated the problems
originally reported by Luigi, and made triply sure that reloads worked, and everything
worked thru "stop gracefully". I found a and fixed a few bugs as I was merging into
trunk, that did not appear in my tests of bug6002.
How's this for verbose commit messages?
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@106757 65c4cc65-6c06-0410-ace0-fbb531ad65f3
(closes issue #8925)
About a year ago, as Leif Madsen and Jim van Meggelen were going over the CLI
commands in Asterisk 1.4 for the next version of their book, they documented
a lot of inconsistencies. This set of changes addresses all of these issues
and has been reviewed by Leif.
While this does introduce even more changes to the CLI command structure, it
makes everything consistent, which is the most important thing.
Thanks to all that helped with this one!
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@103171 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Note: NoAnswer support is currently not implemented, as it would take a
significant amount of work to figure out how to do correctly.
Closes issue #11310, patches, testing, and support by DEA, mvanbaak, and myself.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@98776 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Refer to the proper documentation
- Implement separate signalling/media QoS/CoS in many channels using RTP
- Improve warnings and verbose messages
- Deprecate some old settings
Minor modifications by me, a big effort from IgorG.
Thanks!
Reported by: IgorG
Patches:
qoscleanup-89394-4-trunk.patch uploaded by IgorG (license 20)
Tested by: IgorG
(closes issue #11145)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@93163 65c4cc65-6c06-0410-ace0-fbb531ad65f3
build times - tested, there is no measureable difference before and
after this commit.
In this change:
use asterisk/compat.h to include a small set of system headers:
inttypes.h, unistd.h, stddef.h, stddint.h, sys/types.h, stdarg.h,
stdlib.h, alloca.h, stdio.h
Where available, the inclusion is conditional on HAVE_FOO_H as determined
by autoconf.
Normally, source files should not include any of the above system headers,
and instead use either "asterisk.h" or "asterisk/compat.h" which does it
better.
For the time being I have left alone second-level directories
(main/db1-ast, etc.).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89333 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This prevents modifying the strings in the stored variables,
and catched a few instances where this was actually done.
Given the differences between trunk and 1.4 (and the fact that this
is effectively an API change) it is better to fix 1.4 independently.
These are
chan_sip.c::sip_register()
chan_skinny.c:: near line 2847
config.c:: near line 1774
logger.c::make_components()
res_adsi.c:: near line 1049
I may have missed some instances for modules that do not build here.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89268 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Remove the AST_FORMAT_MAX_* types, as these are consuming 3 out of our available 32 bits.
- Add a native slin16 type, so that 16kHz codecs can translate without losing resolution.
(This doesn't affect anything immediately, until another codec has wb support.)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89071 65c4cc65-6c06-0410-ace0-fbb531ad65f3
a patch for it. It replaces a bunch of simple calls to snprintf with ast_copy_string
(closes issue #10843)
Reported by: Corydon76
Patches:
2007092900_10843.diff uploaded by mvanbaak (license 7)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@84173 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r79174 | file | 2007-08-13 11:18:04 -0300 (Mon, 13 Aug 2007) | 4 lines
(closes issue #10437)
Reported by: haklin
Don't set the callerid name and number a second time on a newly created channel. ast_channel_alloc itself already sets it and setting it twice would cause a memory leak.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@79175 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
(closes issue #10299)
........
r77947 | qwell | 2007-08-02 13:42:36 -0500 (Thu, 02 Aug 2007) | 5 lines
Make sure we clear the prompt status message on a hangup.
Also rearrange messages to better fit with what a wireshark trace shows it should be.
Issue 10299, initial patch and solution by sbisker, modified by me to fit with wireshark trace.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@77948 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
(closes issue #10358)
........
r77894 | qwell | 2007-08-02 10:15:45 -0500 (Thu, 02 Aug 2007) | 5 lines
Make sure that we show the correct extension if dialed from a macro
"From: 5555" rather than "From: s"
Issue 10358, initial patch by DEA, reworked by me to use S_OR, tested by sbisker
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@77895 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r77883 | qwell | 2007-08-01 16:08:42 -0500 (Wed, 01 Aug 2007) | 7 lines
Fix an issue that caused one-way audio on some newer devices (specifically the 7921),
due to sending packets in the wrong order during hangup.
Also make sure we clear tones/messages on the correct line/instance.
Issue 10291, patch by DEA, tested by sbisker and myself.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@77884 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This allows you to just Dial(Skinny/line), as long as line isn't ambiguous.
Note that this does not remove or deprecate the "old" syntax, as it's still
quite useful - even moreso if shared lines get implemented.
Initial patch by me, with some changes and suggestions from wedhorn.
(closes issue #10263)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@76785 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r67156 | qwell | 2007-06-04 18:26:28 -0500 (Mon, 04 Jun 2007) | 6 lines
Fix for skinny keepalives.
If there is no traffic from the phone for (keep_alive * 1100) ms (arbitrarily
adding 10% for network issues, etc), unregister the device.
Issue 8394, patch by DEA.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@67157 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r66881 | russell | 2007-06-01 14:41:30 -0500 (Fri, 01 Jun 2007) | 6 lines
Changes to the way DTMF is handled in the core broke dialing in chan_skinny.
This patch makes chan_skinny usable again. I did not end up testing this,
but there are multiple positive test reports listed in the bug report.
(issue #9596, reported by pj, testing by pj and mvanbaak, and the fix was
written by DEA)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@66882 65c4cc65-6c06-0410-ace0-fbb531ad65f3
places in the code where the same block of code for creating detached threads
was replicated. (patch from bbryant)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@65968 65c4cc65-6c06-0410-ace0-fbb531ad65f3
See skinny.conf.sample for configuration example.
Note: Some devices (seen on 12SP+/30VIP) will lock up if they monitor too many hints.
This seems to be a hardware limitation - there isn't anything we can do about it.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@56594 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r56569 | qwell | 2007-02-23 20:02:53 -0600 (Fri, 23 Feb 2007) | 4 lines
Make sure to set a speeddials parent on creation.
Don't crash if hold is pressed when no call is active.
Don't return in places that we shouldn't..
Update softkey map when call is connected
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@56574 65c4cc65-6c06-0410-ace0-fbb531ad65f3
T.140/RFC 2793 is a live communication channel, originally
created for IP based text phones for hearing impaired.
Feels very much like the old Unix talk application.
This code is developed and disclaimed by John Martin of Aupix, UK.
Tested for interoperability by myself and Omnitor in Sweden,
the company that wrote most of the specifications.
A big thank you to everyone involved in this.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@54838 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r51311 | russell | 2007-01-19 11:49:38 -0600 (Fri, 19 Jan 2007) | 23 lines
Merge the changes from the /team/group/vldtmf_fixup branch.
The main bug being addressed here is a problem introduced when two SIP
channels using SIP INFO dtmf have their media directly bridged. So, when a
DTMF END frame comes into Asterisk from an incoming INFO message, Asterisk
would try to emulate a digit of some length by first sending a DTMF BEGIN
frame and sending a DTMF END later timed off of incoming audio. However,
since there was no audio coming in, the DTMF_END was never generated. This
caused DTMF based features to no longer work.
To fix this, the core now knows when a channel doesn't care about DTMF BEGIN
frames (such as a SIP channel sending INFO dtmf). If this is the case, then
Asterisk will not emulate a digit of some length, and will instead just pass
through the single DTMF END event.
Channel drivers also now get passed the length of the digit to their digit_end
callback. This improves SIP INFO support even further by enabling us to put
the real digit duration in the INFO message instead of a hard coded 250ms.
Also, for an incoming INFO message, the duration is read from the frame and
passed into the core instead of just getting ignored.
(issue #8597, maybe others...)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@51314 65c4cc65-6c06-0410-ace0-fbb531ad65f3
be called for each thread specific object after they are allocated. Note that
there was already the ability to define a custom cleanup function. Also, if
the custom cleanup function is used, it *MUST* call free on the thread
specific object at the end. There is no way to have this magically done that
I can think of because the cleanup function registered with the pthread
implementation will only call the function back with a pointer to the
thread specific object, not the parent ast_threadstorage object.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@45623 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r44378 | kpfleming | 2006-10-04 14:47:22 -0500 (Wed, 04 Oct 2006) | 4 lines
update thread creation code a bit
reduce standard thread stack size slightly to allow the pthreads library to allocate the stack+data and not overflow a power-of-2 allocation in the kernel and waste memory/address space
add a new stack size for 'background' threads (those that don't handle PBX calls) when LOW_MEMORY is defined
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@44379 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r43650 | qwell | 2006-09-26 08:33:47 -0700 (Tue, 26 Sep 2006) | 11 lines
Add proper codec support to chan_skinny. Works with at least ulaw, alaw, and g729a.
This is technically a "new feature", but there are justifications for it.
I found a bug with the recent rtp packetization changes, which caused the media setup to
fail under certain circumstances, particularly when using allow=all, or having no allow=
statements (globally or on the device).
I could have either removed the rtp packetization features, or I could add proper codec
support (which, without, I think most people would consider to be a bug anyways).
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@43651 65c4cc65-6c06-0410-ace0-fbb531ad65f3
now reports AST_MODULE_LOAD_DECLINE when loading if config file
is not there, also fixed an error in res_config_pgsql where it
had a non static function when it should.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@41633 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- restructured build tree and makefiles to eliminate recursion problems
- support for embedded modules
- support for static builds
- simpler cross-compilation support
- simpler module/loader interface (no exported symbols)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@40722 65c4cc65-6c06-0410-ace0-fbb531ad65f3
channel to remove the theoretical race condition that the channel could get
bridged before the channel's jitterbuffer gets configured. This was pointed
out by PCadach on IRC. Thanks!
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@39964 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r38903 | russell | 2006-08-05 01:07:39 -0400 (Sat, 05 Aug 2006) | 2 lines
suppress a compiler warning about the usage of a potentially uninitialized variable
........
r38904 | russell | 2006-08-05 01:08:50 -0400 (Sat, 05 Aug 2006) | 10 lines
Fix an issue that would cause a NewCallerID manager event to be generated
before the channel's NewChannel event. This was due to a somewhat recent
change that included using ast_set_callerid() where it wasn't before. This
function should not be used in the channel driver "new" functions.
(issue #7654, fixed by me)
Also, fix a couple minor bugs in usecount handling. chan_iax2 could have
increased the usecount but then returned an error. The place where chan_sip
increased the usecount did not call ast_update_usecount()
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@38905 65c4cc65-6c06-0410-ace0-fbb531ad65f3
inet_ntoa, which uses thread specific data (aka thread local storage) instead
of stack allocatted buffers to store the result.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@38042 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Abstract out some common code into a single function
With the recent scheduler "issues", it pointed out a few things I might have been missing,
so I added some rudimentary vrtp and rtcp stuff
General cleanup...
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@37629 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r36725 | russell | 2006-07-03 00:19:09 -0400 (Mon, 03 Jul 2006) | 4 lines
use ast_set_callerid to be more consistent and to make sure that the
"callerid" option in the conf files is always handled the same way and sets ANI
(issue #7285, gkloepfer)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@36726 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- don't call the byte swapping macros on single byte numbers
- don't do a ++ increment in the argument in the argument to the byte swapping
macros. This gets expanded to incrementing the variable 4 times in a single
operation, which results in undefined (and obviously undesired) behavior. :)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@35766 65c4cc65-6c06-0410-ace0-fbb531ad65f3
allocated. These changes caused crashes when using a channel type that did
not support the jitterbuffer. Instead of fixing why it's crashing, I'm going
to implement this in a better way next week. The way I did it caused a
jitterbuffer to be allocated on every channel where the channel type supported
jitterbuffers, even if they were disabled.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@35746 65c4cc65-6c06-0410-ace0-fbb531ad65f3
so that channels not using a jitterbuffer don't waste as much memory
- ensure that the channel drivers that use jitterbuffers can handle a failure
from configuring a jitterbuffer on a new channel because of a memory
allocation error
- On passing through these channel drivers, configure the jitterbuffer before
starting the PBX thread instead of afterwards. If the pbx fails to start for
whatever reason, this would have caused a crash.
- Also on passing, move the increase of the usecount to after all of the
possible failure conditions in the function
- fix a place where ast_update_use_count() was not called
- ensure that the owner channel pointer of the channel pvt strcutures is set to
NULL in failure conditions
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@35553 65c4cc65-6c06-0410-ace0-fbb531ad65f3