'--with-pjproject-bundled' is now the default when running
./configure. It can be disabled with '--without-pjproject-bundled'.
To make building without an internet connection easier, a new
./configure option '--with-download-cache' was added that sets
the cache for externals (like pjproject, the codecs and the DPMA),
AND the sounds files. It can also be specified as an environment
variable named "AST_DOWNLOAD_CACHE". The existing
'--with-sounds-cache' option / SOUNDS_CACHE_DIR env variable and
'--with-externals-cache' option / EXTERNALS_CACHE_DIR env variable
remain and if specified, will override '--with-downloads-cache'.
ASTERISK-27189
Change-Id: Ifa9783fddf44aafadb060c9feba713dfa81d38ce
Some systems (like macOS) require BIND_8_COMPAT to be defined so that
the nameser libraries are, well, BIND8 compatible.
Change-Id: If79fc27a64f90de1835b5aa3aadfa9be22bd16b0
After configuring Asterisk with '--with-pjproject-bundled' the configure/build
process attempts to download pjproject from its download site. Currently, a
timeout of 10 seconds is used that will stop the download process if pjproject
has not been fully downloaded in that time. For some systems this was not enough
time and the process was timing out too early.
This patch raises the download timeout value to '60'. Also, this patch fixes
another bug where the DOWNLOAD_TIMEOUT variable was not being properly exported
due to a naming error. DOWNLOAD_MAX_TIMEOUT is now properly renamed to
DOWNLOAD_TIMEOUT.
ASTERISK-26814 #close
Change-Id: Ia56e4e8a3d39db76bc8a1852b2cf07ec10b39842
The download process now has a timeout which will cause wget to retry
if it stops retrieving data for 5 seconds and fetch and curl to timeout
if the whole retrieval take smore than 30 seconds.
If the tarball retrieval works, the MD5SUM file is retrieved from
the downloads site and the md5 checksum is verified.
If either the tarball retrieval or MD5SUM retrieval fails, or the
checksums don't match, the entire process is retried once. If it
fails again, any incomplete tarball is deleted.
.DELETE_ON_ERROR: was also added to the Makefile. Not only does
this delete the tarball on failure, it till also delete corrupted
library files from the pjproject source directory should they
fail to build correctly.
Tested all the way back to FreeBSD 9, CentOS 6, Debian 6 and
Ubuntu 14.
Change-Id: Iea7d33b96a31622ab1b6e54baebaf271959514e1
Adds libfftw3 to the build chain that is is going to be used for binaural
synthesis by bridge_softmix.
ASTERISK-26292
Change-Id: Iedc2f174e4ccb39ae5d9e698e339c6a17155867b
Added tests for bzip2, tar, patch, sed and nm to configure.ac.
Set DOWNLOAD_TO_STDOUT to a working command line regardless of
whether the download program is wget, curl or fetch.
Added a 'configure.m4' file to the third-party directory which takes
care of calling any third-party project setup. Had to move some
pjproject_bundled stuff up in configure.ac so it was called before
the third-party configure macro.
The pjproject tarball is now downloaded to the externals_cache_dir if
it was specified on the ./configure command line
Removed regeneration of the pjproject aconfigure file. It was only
needed for an old patch that no longer applies.
Converted the tests for symbols to explicit tests since we know that
they're now available in the bundled version. Saves a little time
during configure.
ASTERISK-26416 #close
Reported-by: Corey Farrell
Change-Id: Id1d94251c0155f8dd41b7de7067f35cfbaafbb9b
(cherry picked from commit e6b0053d75)
(cherry picked from commit a0d02f3832)
Add Ogg/Opus playback support.
This uses libopusfile in order to be able to read .opus files and play
them back.
Writing/recording support is not present at this time.
ASTERISK-26409
Change-Id: I8815d23345108d8ca7c0bd640f6a1ce6b4f56955
(cherry picked from commit daee8bbd5209b4158bc1785eede845a26e6cbeaa)
sd_notify() is used to notify systemd of changes to the status of the
process. This allows the systemd daemon to know when the process
finished loading (and thus only start another program after Asterisk has
finished loading).
To use this, use a systemd unit with 'Type=notify' for Asterisk.
This commit also adds the function ast_sd_notify(), a wrapper around
sd_notify that does nothing if not built with systemd support.
Also adds support for libsystemd detection in the configure script.
Change-Id: Ied6a59dafd5ef331c5c7ae8f3ccd2dfc94be7811
The DPMA and g729a, silk, siren7 and siren14 codecs hosted at
http://downloads.digium.com/pub/telephony/ are now listed in the
"External" sections of the "Resource Modules" and "Codec Translators"
pages in menuselect. Any that are selected will automatically be
downloaded and installed when "make install" is run. Their LICENSE and
README (if avaialble) files will be installed to
ASTVARLIBDIR/documentation/thirdparty/<product_name>.
Example use with codecs:
The codecs/codecs.xml file is a menuselect style xml file that lists
the codecs to be included. Their support levels are 'external', which
triggers the download and install, and defaultenabled is no. Also
because codec_g729a is actually in a directory named codec_g729 on the
download server, the newly added 'member_data' element is used to
override the default of the directory name being the package name. You
can use the 'directory_name' attribute to keep default base URL
(http://downloads.digium.com/pub/telephony/) but use the new directory,
or you use the 'remote_url' attribute to specify a full URL to the
download directory. In this case, you must still follow the same
subdirectory naming conventions as that used for the packages located
at 'http://downloads.digium.com/pub/telephony'.
A new configure option '--with-externals-cache' was added and like
'--with-sounds-cache' it allows the installer to cache tarballs so
they're not downloaded every time.
To assist with the download and install process, each external package
now has a manifest.xml file that, among other things, contains a package
version and checksums for each file in the tarball. The manifest is
saved to both the cache directory and ASTMODDIR and together with the
manifest.xml on the downloads site, tells the install scripts whether
a download and/or update is needed.
bash and xmlstarlet are required for downloader operation. If they're
not installed, the external items in menuselect will be unavailable.
Change-Id: Id3dcf1289ffd3cb0bbd7dfab3cafbb87be60323a
The pjsua and pjsystest apps are now built only if TEST_FRAMEWORK is set.
The python bindings are now built only if TEST_FRAMEWORK is set and a
python development package is installed.
libresample was also disabled.
ASTERISK-25993 #close
Reported-by: Joshua Colp
Change-Id: If4e91c503a02f113d5b71bc8b972081fa3ff6f03
Background here:
http://lists.digium.com/pipermail/asterisk-dev/2016-January/075266.html
From CHANGES:
* To help insure that Asterisk is compiled and run with the same known
version of pjproject, a new option (--with-pjproject-bundled) has been
added to ./configure. When specified, the version of pjproject specified
in third-party/versions.mak will be downloaded and configured. When you
make Asterisk, the build process will also automatically build pjproject
and Asterisk will be statically linked to it. Once a particular version
of pjproject is configured and built, it won't be configured or built
again unless you run a 'make distclean'.
To facilitate testing, when 'make install' is run, the pjsua and pjsystest
utilities and the pjproject python bindings will be installed in
ASTDATADIR/third-party/pjproject.
The default behavior remains building with the shared pjproject
installation, if any.
Building:
All you have to do is include the --with-pjproject-bundled option on
the ./configure command line (and remove any existing --with-pjproject
option if specified). Everything else is automatic.
Behind the scenes:
The top-level Makefile was modified to include 'third-party' in the
list of MOD_SUBDIRS.
The third-party directory was created to contain any third party
packages that may be needed in the future. Its Makefile automatically
iterates over any subdirectories passing on targets.
The third-party/pjproject directory was created to house the pjproject
source distribution. Its Makefile contains targets to download, patch
configure, generate dependencies, compile libs, apps and python bindings,
sanitized build.mak and generate a symbols list.
When bootstrap.sh is run, it automatically includes the configure.m4
file in third-party/pjproject. This file has a macro to download and
conifgure pjproject and get and set PJPROJECT_INCLUDE, PJPROJECT_DIR
and PJPROJECT_BUNDLED. It also tests for the capabilities like
PJ_TRANSACTION_GRP_LOCK by parsing preprocessor output as opposed to
trying to compile. Of course, bootstrap.sh is only run once and the
configure file is incldued in the patch.
When configure is run with the new options, the macro in configure.m4
triggers the download, patch, conifgure and tests. No compilation is
performed at this time. The downloaded tarball is cached in /tmp so
it doesn't get downloaded again on a distclean.
When make is run in the top-level Asterisk source directory, it will
automatically descend all the subdirectories in third_party just as it
does for addons, apps, etc. The top-level Makefile makes sure that
the 'third-party' is built before 'main' so that dependencies from the
other directories are built first.
When main does build, a new shared library (libasteriskpj) is created that
links statically to the pjproject .a files and exports all their symbols.
The asterisk binary links to that, just as it does with libasteriskssl.
When Asterisk is installed, the pjsua and pjsystest apps, and the pjproject
python bindings are installed in ASTDATADIR/third-party/pjproject. This
will facilitate testing, including running the testsuite which will be
updated to check that directory for the pjsua module ahead of the system
python library.
Modules should continue to depend on pjproject if they use pjproject APIs
directly. They should not care about the implementation. No changes to any
res_pjsip modules were made.
Change-Id: Ia7a60c28c2e9ba9537c5570f933c1ebcb20a3103
* Add 'check-alembic' target to root Makefile.
* Create build_tools/make_check_alembic to do the actual checks.
ASTERISK-25685
Change-Id: Ibb3cae7d1202ac23dc70b0f3b5801571ad46b004
clock_gettime() is, unfortunately, not portable. But I did like that
over our usual `ts.tv_nsec = tv.tv_usec * 1000` copy/paste code we
usually do when we want a timespec and all we have is ast_tvnow().
This patch adds ast_tsnow(), which mimics ast_tvnow(), but returns a
timespec. If clock_gettime() is available, it will use that. Otherwise
ast_tsnow() falls back to using ast_tvnow().
Change-Id: Ibb1ee67ccf4826b9b76d5a5eb62e90b29b6c456e
Created autoconf/ast_check_raii.m4: contains AST_CHECK_RAII which
checks compiler requirements for RAII:
gcc: -fnested-functions support
clang: -fblocks (and if required -lBlocksRuntime)
The original check was implemented in configure.ac and now has it's
own file. This function also sets C_COMPILER_FAMILY to either gcc or
clang for use by makefile
Created autoconf/ast_check_strsep_array_bounds.m4 (contains
AST_CHECK_STRSEP_ARRAY_BOUNDS):
which checks if clang is able to handle the optimized strsep & strcmp
functions (linux). If not, the standard libc implementation should be
used instead. Clang + the optimized macro's work with:
strsep(char *, char []), but not with strsepo(char *, char *).
Instead of replacing all the occurences throughout the source code,
not using the optimized macro version seemed easier
See 'define __strcmp_gc(s1, s2, l2) in bits/string2.h':
llvm-comment: Normally, this array-bounds warning are suppressed for
macros, so that unused paths like the one that accesses __s1[3] are
not warned about. But if you preprocess manually, and feed the
result to another instance of clang, it will warn about all the
possible forks of this particular if statement. Instead of switching
of this optimization, another solution would be to run the preproces-
sing step with -frewrite-includes, which should preserve enough
information so that clang should still be able to suppress the diag-
nostic at the compile step later on.
See also "https://llvm.org/bugs/show_bug.cgi?id=20144"
See also "https://llvm.org/bugs/show_bug.cgi?id=11536"
Makefile.rules: If C_COMPILER_FAMILY=clang then add two warning
suppressions:
-Wno-unused-value
-Wno-parentheses-equality
In an earlier review (reviewboard: 4550 and 4554), they were deemed a
nuisace and less than benefitial.
configure.ac:
Added AST_CHECK_RAII() see earlier
Added AST_CHECK_STRSEP_ARRAY_BOUNDS() see earlier
Removed moved content
ASTERISK-24917
Change-Id: I12ea29d3bda2254ad3908e279b7effbbac6a97cb
This change adds an abstracted core DNS API which resembles the API described
here[1]. The API provides a pluggable mechanism for resolvers and also a
consistent view for records. Both synchronous and asynchronous queries are
supported.
This change also adds a res_resolver_unbound module which uses the libunbound
library to provide resolution.
Unit tests have also been written for all of the above to confirm the API and
functionality.
ASTERISK-24834 #close
Reported by: Matt Jordan
ASTERISK-24836 #close
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/4474/
Review: https://reviewboard.asterisk.org/r/4512/
[1] https://wiki.asterisk.org/wiki/display/AST/Asterisk+DNS+API
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433370 65c4cc65-6c06-0410-ace0-fbb531ad65f3
RAII_VAR, which is used extensively in Asterisk to manage reference counted
resources, uses a GCC extension to automatically invoke a cleanup function
when a variable loses scope. While this functionality is incredibly useful
and has prevented a large number of memory leaks, it also prevents Asterisk
from being compiled with clang.
This patch updates the RAII_VAR macro such that it can be compiled with clang.
It makes use of the BlocksRuntime, which allows for a closure to be created
that performs the actual cleanup.
Note that this does not attempt to address the numerous warnings that the clang
compiler catches in Asterisk.
Much thanks for this patch goes to:
* The folks on StackOverflow who asked this question and Leushenko for
providing the answer that formed the basis of this code:
http://stackoverflow.com/questions/24959440/rewrite-gcc-cleanup-macro-with-nested-function-for-clang
* Diederik de Groot, who has been extremely patient in working on getting this
patch into Asterisk.
Review: https://reviewboard.asterisk.org/r/4370/
ASTERISK-24133
ASTERISK-23666
ASTERISK-20399
ASTERISK-20850 #close
Reported by: Diederik de Groot
patches:
RAII_CLANG.patch uploaded by Diederik de Groot (License 6600)
........
Merged revisions 432807 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 432808 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432809 65c4cc65-6c06-0410-ace0-fbb531ad65f3
gcc on the ARM platform defaults 'char' to 'unsigned char' whereas Intel and
SPARC default to 'signed char'. This is only an issue in the rare cases where
negative values are assigned to a 'char' but this this patch insures
compatibility by detecting platforms that default to 'unsigned' and adding an
'-fsigned-char' flag to _ASTCFLAGS.
If compiling for ARM (native or cross-compile) be sure to run ./bootstrap.sh
and ./configure to regenerate the build files. You shouldn't have to do this
for Intel or SPARC.
Tested-by: George Joseph
Review: https://reviewboard.asterisk.org/r/4091/
........
Merged revisions 425964 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 425965 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425966 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch changes the install to only install the hook script if
DAHDI is enabled. It also adds the script to the uninstall task, and
moves the DAHDI_UDEV_HOOK_DIR variable so that it's not between the
_MAKEOPTS variables and their comment.
This allows installs which specify a --prefix to work normally, as
long as they don't enable DAHDI.
Review: https://reviewboard.asterisk.org/r/3972/
........
Merged revisions 423281 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423283 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This prevents XML documentation duplication by expanding channel and
bridge snapshot tags into channel and bridge snapshot parameter sets
with a given prefix or defaulting to no prefix. This also prevents
documentation from becoming fractured and out of date by keeping all
variations of the documentation in template form such that it only
needs to be updated once and keeps maintenance to a minimum.
Review: https://reviewboard.asterisk.org/r/2708/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395985 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds authentication support to ARI.
Two authentication methods are supported. The first is HTTP Basic
authentication, as specified in RFC 2617[1]. The second is by simply
passing the username and password as an ?api_key query parameter
(which allows swagger-ui[2] to authenticate more easily).
ARI usernames and passwords are configured in the ari.conf file
(formerly known as stasis_http.conf). The user may be set to
`read_only`, which will prohibit the user from issuing POST, DELETE,
etc. Also, the user's password may be specified in either plaintext,
or encrypted using the crypt() function.
Several other notes about the patch.
* A few command line commands for seeing ARI config and status were
also added.
* The configuration parsing grew big enough that I extracted it to
its own file.
[1]: http://www.ietf.org/rfc/rfc2617.txt [2]:
https://github.com/wordnik/swagger-ui
(closes issue ASTERISK-21277)
Review: https://reviewboard.asterisk.org/r/2649/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393530 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The library that provides UUID support varies greatly from system to
system. On most Linux distros, it's in libuuid. On OpenBSD, it's in
libe2fs-uuid. On OS X, it is in libsystem.
This patch plays hide-and-seek with UUID support, looking for it in the
three places we know about. It also corrects the Makefile so that it uses
the configured library name and include path.
(closes issue ASTERISK-21816)
Reported by: Brad Latus (snuffy)
Tested by: Brad Latus (snuffy)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390352 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This provides a JSON API by pulling in and wrapping the Jansson JSON
library[1]. The Asterisk API basically mirrors the Jansson
functionality, with a few minor tweaks.
* Some names have been asteriskified to protect the innocent.
* Jansson provides both reference-stealing and reference-borrowing
versions of several API's. The Asterisk API is exclusively
reference-stealing for operations that put elements into arrays and
objects.
* No support for doubles, since we usually don't need that.
* Coming along for the ride is the ast_test_validate macro, which made
the unit tests much easier to write.
[1]: http://www.digip.org/jansson/
(issue ASTERISK-20887)
(closes issue ASTERISK-20888)
Review: https://reviewboard.asterisk.org/r/2264/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@378915 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Make git more attractive for managing work-in-progress. Especially
convenient when a potential patch set needs to be tested on multiple
platforms since one can use git to keep all the test environments in sync
independent of a subversion server.
Now the Asterisk version will show the exact git SHA5 that was used when
building (still appended by "M" if there are local modifications) from a
git clone of the Asterisk repository so the developer can more easily know
what is actually under test.
You will now get this:
$ asterisk -V
Asterisk GIT-1698298
Instead of this:
$ asterisk -V
Asterisk UNKNOWN__and_probably_unsupported
This has zero impact for those not using git with the exception of an
extra test in the configure script to gather git's path. This is
necessary to prevent "sudo make install" from failing since git may not be
in the path in make's shell environment.
(closes issue ASTERISK-20483)
Reported by: Shaun Ruffell
Patches:
0001-build_tools-Allow-Asterisk-to-report-git-SHAs-in-ver.patch (license #5417) patch uploaded by Shaun Ruffell
Modified
........
Merged revisions 375189 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 375190 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 375191 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375192 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The autoconf configuration system had a test for DOT but not for Doxygen. I added the test for Doxygen and did an overhaul of the Makefile check to a much simpler process.
(issue ASTERISK-20259)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@374940 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In order to use nested functions on some versions of GCC (e.g. GCC on OS X),
the -fnested-functions flag must be passed to the compiler. This patch adds
detection logic to ./configure to add the flag if necessary. It also adds
a comment to utils.h as to why the nested function needs a prototype.
(closes issue ASTERISK-20399)
Reported by: David M. Lee
Review: https://reviewboard.asterisk.org/r/2102/
........
Merged revisions 373119 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373120 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch changes the Asterisk configure script and build system to detect
the presence of the NetBSD editline library (libedit) on the system. If it is
found, it will be used in preference to the version included in the Asterisk
source tree.
(closes issue ASTERISK-18725)
Reported by: Jeffrey C. Ollie
Review: https://reviewboard.asterisk.org/r/1528/
Patches:
0001-Allow-linking-building-against-an-external-editline.patch uploaded by jcollie (license #5373) (heavily modified by kpfleming)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370481 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds the core changes necessary to support AMI event documentation
in the source files of Asterisk, and adds documentation to those AMI events
defined in the core application modules. Event documentation is built from
the source by two new python scripts, located in build_tools:
get_documentation.py and post_process_documentation.py.
The get_documentation.py script mirrors the actions of the existing AWK
get_documentation scripts, except that it will scan the entirety of a source
file for Asterisk documentation. Upon encountering it, if the documentation
happens to be an AMI event, it will attempt to extract information about the
event directly from the manager event macro calls that raise the event. The
post_process_documentation.py script combines manager event instances that
are the same event but documented in multiple source files. It generates
the final core-[lang].xml file.
As this process can take longer to complete than a typical 'make all', it
is only performed if a new make target, 'full', is chosen.
Review: https://reviewboard.asterisk.org/r/1967/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369346 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Passing -Wshadow to gcc enables shadow warnings. From the gcc manual:
Warn whenever a local variable or type declaration shadows another
variable, parameter, type, or class member (in C++), or whenever a
built-in function is shadowed.
Asterisk will not currently compile with this option set, but a number of bugs
have been discovered by enabling this flag on specific files. The long-term
goal is to eliminate all of the suspect code that causes this warning to be
emitted.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@358622 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch removes res_ais and introduces a new module, res_corosync.
The OpenAIS project is deprecated and is now just a wrapper around
Corosync. This module provides the same functionality using the same
core infrastructure, but without the use of the deprecated components.
Technically res_ais could have been used with an AIS implementation other
than OpenAIS, but that is the only one I know of that was ever used.
Review: https://reviewboard.asterisk.org/r/1700/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354046 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When Asterisk is used with various third-party libraries (CURL, PostgresSQL,
many others) that have the ability themselves to use OpenSSL, it is possible
for conflicts to arise in how the OpenSSL libraries are initialized and
shutdown. This patch addresses these conflicts by 'wrapping' the important
functions from the OpenSSL libraries in a new shared library that is part
of Asterisk itself, and is loaded in such a way as to ensure that *all*
calls to these functions will be dispatched through the Asterisk wrapper
functions, not the native functions.
This new library is optional, but enabled by default. See the CHANGES file
for documentation on how to disable it.
Along the way, this patch also makes a few other minor changes:
* Changes MODULES_DIR to ASTMODDIR throughout the build system, in order to
more closely match what is used during run-time configuration.
* Corrects some errors in the configure script where AC_CHECK_TOOLS was used
instead of AC_PATH_PROG.
* Adds a new variable for linker flags in the build system (DYLINK), used for
producing true shared libraries (as opposed to the dynamically loadable
modules that the build system produces for 'regular' Asterisk modules).
* Moves the Makefile bits that handle installation and uninstallation of the
main Asterisk binary into main/Makefile from the top-level Makefile.
* Moves a couple of useful preprocessor macros from optional_api.h to
asterisk.h.
Review: https://reviewboard.asterisk.org/r/1006/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353317 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r332369 | tilghman | 2011-08-17 14:24:59 -0500 (Wed, 17 Aug 2011) | 17 lines
Merged revisions 332355 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r332355 | tilghman | 2011-08-17 14:21:36 -0500 (Wed, 17 Aug 2011) | 10 lines
Re-add support for spaces in pathnames, including now spaces in DESTDIR.
This was initially added to 1.8 prior to release, primarily to support the
standard paths on Mac OS X, but was partially reverted recently in Subversion,
due to the lack of support for spaces in DESTDIR. This commit restores support
for the standard paths on Mac OS X, and also includes support for spaces in
DESTDIR.
(closes issue ASTERISK-18290)
Reported by: pabelanger
Review: https://reviewboard.asterisk.org/r/1326/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@332388 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Recent versions of GCC have a tuning option value of 'native', which causes
the compiler to optimize the build for the CPU the compile is performed on.
Since most people are building Asterisk on the machine they plan to run it on,
the configure script and build system will now use this value unless a different
value is specified by the user in CFLAGS when the configure script is executed.
In addition, this value will be used for building the GSM and LPC10 codecs as
well, in preference to the logic that has been in their Makefiles forever to
optimize for certain types of CPUs.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@310332 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r298960 | tilghman | 2010-12-17 17:52:04 -0600 (Fri, 17 Dec 2010) | 20 lines
Merged revisions 298957 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r298957 | tilghman | 2010-12-17 17:30:55 -0600 (Fri, 17 Dec 2010) | 13 lines
Merged revisions 298905 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r298905 | tilghman | 2010-12-17 15:40:56 -0600 (Fri, 17 Dec 2010) | 6 lines
Let Asterisk find better backtrace information with libbfd.
The menuselect option BETTER_BACKTRACES, if enabled, will use libbfd to search
for better symbol information within both the Asterisk binary, as well as
loaded modules, to assist when using inline backtraces to track down problems.
Review: https://reviewboard.asterisk.org/r/1055/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@298961 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r279953 | russell | 2010-07-27 16:16:05 -0500 (Tue, 27 Jul 2010) | 5 lines
Add --enable-coverage option to configure script.
This option enables the proper compiler flags for tracking code coverage, which
is useful along side automated testing.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@279954 65c4cc65-6c06-0410-ace0-fbb531ad65f3