This patch addresses compilation errors on OS X. It's been a while, so
there's quite a few things.
* Fixed __attribute__ decls in route.h to be portable.
* Fixed htonll and ntohll to work when they are defined as macros.
* Replaced sem_t usage with our ast_sem wrapper.
* Added ast_sem_timedwait to our ast_sem wrapper.
* Fixed some GCC 4.9 warnings using sig*set() functions.
* Fixed some format strings for portability.
* Fixed compilation issues with res_timing_kqueue (although tests still fail
on OS X).
* Fixed menuconfig /sbin/launchd detection, which disables res_timing_kqueue
on OS X).
ASTERISK-24539 #close
Reported by: George Joseph
ASTERISK-24544 #close
Reported by: George Joseph
Review: https://reviewboard.asterisk.org/r/4327/
........
Merged revisions 431092 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@431093 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The Asterisk 13 configure.ac checks for HAS_WORKING_SEMAPHORE but does not have
an option for cross-compiling so it fails with an exit. Since we're cross-
compiling, we can't exactly go looking for the header. The semaphore.h header
is relatively common:
* It's part of the POSIX standard
* It's part of GNU C Library
As such, we assume that it will be present when cross-compiling.
As such, this patch defaults "HAS_WORKING_SEMAPHORE" to "1" if cross-compiling
is detected.
If you're cross-compiling to a platform that doesn't support this, then make
sure you re-define this to 0.
ASTERISK-24663 #close
Reported by: abelbeck
patches:
asterisk-13-anonymous-semaphores.patch uploaded by abelbeck (License 5903)
........
Merged revisions 430646 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430647 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The 'pjsip_get_dest_info' function is used to determine if the signaling transport
of the dialog is secure or not. This function was added in PJSIP 2.3 and does not
exist in earlier versions.
This configure check allows Asterisk to build and run with older versions at the
loss of the 'secure' argument for the PJSIP CHANNEL dialplan function. Usage of
this argument will require upgrading to PJSIP 2.3.
ASTERISK-24665 #close
Reported by: Mark Michelson
Review: https://reviewboard.asterisk.org/r/4329/
........
Merged revisions 430546 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430547 65c4cc65-6c06-0410-ace0-fbb531ad65f3
gcc on the ARM platform defaults 'char' to 'unsigned char' whereas Intel and
SPARC default to 'signed char'. This is only an issue in the rare cases where
negative values are assigned to a 'char' but this this patch insures
compatibility by detecting platforms that default to 'unsigned' and adding an
'-fsigned-char' flag to _ASTCFLAGS.
If compiling for ARM (native or cross-compile) be sure to run ./bootstrap.sh
and ./configure to regenerate the build files. You shouldn't have to do this
for Intel or SPARC.
Tested-by: George Joseph
Review: https://reviewboard.asterisk.org/r/4091/
........
Merged revisions 425964 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 425965 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425966 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When configuring Asterisk to build against a version of pjproject installed
in a non-standard location, the checks for "PJSIP Transaction Group Lock
Support" and "PJSIP Media Stream Replacement Support" fail. This is
because these secondary checks are not taking the CFLAGS and LIBS returned
by the pkg-config check into account.
Review: https://reviewboard.asterisk.org/r/3830
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419077 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The commit that added libxml2 support didn't fully check for the libxml2
development script in the Asterisk configure file. As a result, Asterisk could
be configured, then fail on menuselect. This patch fixes it so that Asterisk
should detect the libxml2 dependency failure first.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418850 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is the final patch in adding menuselect to Asterisk.
- The first patch (r418832) added menuselect along with mxml
- The second patch (r418833) removed mxml from menuselect
This patch adds support for libxml2 to menuselect, and makes libxml2 a
required library for Asterisk.
Note that the libxml2 portion of this patch was written by Sean Bright,
and was made available on a team branch:
http://svn.digium.com/svn/menuselect/team/seanbright/libxml2/
Review: https://reviewboard.asterisk.org/r/3773/
ASTERISK-20703 #close
patches:
some_mysterious_team_branch uploaded by seanbright (License 5060)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418834 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The previous patch (r418034) fixed the 'glitch' that the channels/h323
Makefile no longer existed. Unfortunately, removing the entire line was a bit
of a blunder, as it meant that build_tools/menuselect-deps was never
generated. Hilarity ensued when actually trying to compile.
But hey! At least configure worked.
This patch fixes *that* glitch, and removes some more of the vestiges of h323.
(It had tendrils in the main Makefile? Crazy.)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418035 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The patch for ASTERISK-23905 that added PFS support in Asterisk depends on the
elliptic curve library support being present in OpenSSL. As it turns out, some
versions of OpenSSL don't have this library - notably the version running on
our build agents.
This patch fixes the build by providing a configure check for the specific
library calls that the PFS patch relies on.
Review: https://reviewboard.asterisk.org/r/3709/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417900 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* SS7 support now requires libss7 v2.0 or later. The new libss7 is not
backwards compatible.
* Added SS7 support for connected line and redirecting.
* Most SS7 CLI commands are reworked as well as new SS7 commands added.
See online CLI help.
* Added several SS7 config option parameters described in
chan_dahdi.conf.sample.
* ISUP timer support reworked and now requires explicit configuration.
See ss7.timers.sample.
Special thanks to Kaloyan Kovachev for his support and persistence in
getting the original patch by adomjan updated and ready for release.
SS7-27 #close
Reported by: adomjan
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@416416 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When overlap dialing is enabled, the lack of inband audio available
information in the SETUP_ACKNOWLEDGE events causes an interoperability
problem with SIP. sig_pri doesn't know if there is dialtone present when
a SETUP_ACKNOWLEDGE is received so it assumes it is there and posts an
AST_CONTROL_PROGRESS frame. The SIP channel driver then sends out a 183
Session Progress and blocks the desired 180 Ringing message when the
ALERTING message comes in.
* Made the configure script detect if the installed version of libpri
supports the SETUP_ACKNOWLEDGE enhancements.
* Using the new API, made generate an AST_CONTROL_PROGRESS frame on an
incoming SETUP_ACKNOWLEDGE message when the message indicates inband audio
is present instead of assuming that dialtone is present.
* Using the new API, made SETUP_ACKNOWLEDGE send out an inband audio
available indication only if dialtone is expected. The change also makes
the fallback behaviour of sending the PROGRESS message better by sending
it only if dialtone is expected.
* Changed receiving a PROCEEDING message to not generate an
AST_CONTROL_PROGRESS frame if the progress indication ie indicates
non-end-to-end-ISDN. This helps interoperability with SIP.
* Changed sending a PROCEEDING message in response to an
AST_CONTROL_PROCEEDING frame to not indicate inband audio available. It
was silly to do so anyway because the channel driver doesn't know if
inband audio is even available. This helps interoperability with SIP.
This patch and a corresponding change in libpri work together to allow
Asterisk to control the inband audio available progress indication ie on
the SETUP_ACKNOWLEDGE message when dialtone is present.
AST-1338 #close
Reported by: Tyler Stewart
Review: https://reviewboard.asterisk.org/r/3521/
........
Merged revisions 413714 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 413765 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 413771 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@413772 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There are cases in Asterisk where it might be desirable to lock
a short critical code section but not incur the context switch
and yield penalty of a mutex or rwlock. The primary spinlock
implementations execute exclusively in userspace and therefore
don't incur those penalties. Spinlocks are NOT meant to be a
general replacement for mutexes. They should be used only for
protecting short blocks of critical code such as simple compares
and assignments. Operations that may block, hold a lock, or
cause the thread to give up it's timeslice should NEVER be
attempted in a spinlock.
The first use case for spinlocks is in astobj2 - internal_ao2_ref.
Currently the manipulation of the reference counter is done with
an ast_atomic_fetchadd_int which works fine. When weak reference
containers are introduced however, there's an additional comparison
and assignment that'll need to be done while the lock is held.
A mutex would be way too expensive here, hence the spinlock.
Given that lock contention in this situation would be infrequent,
the overhead of the spinlock is only a few more machine instructions
than the current ast_atomic_fetchadd_int call.
ASTERISK-23553 #close
Review: https://reviewboard.asterisk.org/r/3405/
........
Merged revisions 412976 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412977 65c4cc65-6c06-0410-ace0-fbb531ad65f3
SIP transaction group lock support has been backported into our pjproject. Since the code
now internally uses a group lock the code is now changed to unlock it if present. Note
that the act of finding the transaction is what actually returns it locked.
For further information about group locks check out the wiki page at:
http://trac.pjsip.org/repos/wiki/Group_Lock
(issue ASTERISK-22818)
Reported by: Matt Jordan
........
Merged revisions 402864 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402865 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When running configure, libiodbc2 development headers will fulfill the
requirement for ODBC development headers, but will not function
properly. This adds a warning when libiodbc2 development headers are
detected instead of unixodbc development headers.
(closes issue ASTERISK-22459)
Reported by: Patrick Maille
Tested by: Walter Doekes
Patches:
issueA22459_warn_when_using_iodbc.patch uploaded by Walter Doekes (License 5674)
........
Merged revisions 400767 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 400768 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 400769 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400770 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This introduces usage of an additional libxslt cleanup function,
xsltCleanupGlobals, when the configure script detects that it is
available. Early versions of the library did not include this function.
(closes issue ASTERISK-22570)
Reported by: Corey Farrell
Patches:
xsltCleanupGlobals.patch uploaded by Corey Farrell (License 5909)
........
Merged revisions 400384 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400385 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r399887 | dlee | 2013-09-26 10:41:47 -0500 (Thu, 26 Sep 2013) | 1 line
Minor performance bump by not allocate manager variable struct if we don't need it
........
r400138 | dlee | 2013-09-30 10:24:00 -0500 (Mon, 30 Sep 2013) | 23 lines
Stasis performance improvements
This patch addresses several performance problems that were found in
the initial performance testing of Asterisk 12.
The Stasis dispatch object was allocated as an AO2 object, even though
it has a very confined lifecycle. This was replaced with a straight
ast_malloc().
The Stasis message router was spending an inordinate amount of time
searching hash tables. In this case, most of our routers had 6 or
fewer routes in them to begin with. This was replaced with an array
that's searched linearly for the route.
We more heavily rely on AO2 objects in Asterisk 12, and the memset()
in ao2_ref() actually became noticeable on the profile. This was
#ifdef'ed to only run when AO2_DEBUG was enabled.
After being misled by an erroneous comment in taskprocessor.c during
profiling, the wrong comment was removed.
Review: https://reviewboard.asterisk.org/r/2873/
........
r400178 | dlee | 2013-09-30 13:26:27 -0500 (Mon, 30 Sep 2013) | 24 lines
Taskprocessor optimization; switch Stasis to use taskprocessors
This patch optimizes taskprocessor to use a semaphore for signaling,
which the OS can do a better job at managing contention and waiting
that we can with a mutex and condition.
The taskprocessor execution was also slightly optimized to reduce the
number of locks taken.
The only observable difference in the taskprocessor implementation is
that when the final reference to the taskprocessor goes away, it will
execute all tasks to completion instead of discarding the unexecuted
tasks.
For systems where unnamed semaphores are not supported, a really
simple semaphore implementation is provided. (Which gives identical
performance as the original taskprocessor implementation).
The way we ended up implementing Stasis caused the threadpool to be a
burden instead of a boost to performance. This was switched to just
use taskprocessors directly for subscriptions.
Review: https://reviewboard.asterisk.org/r/2881/
........
r400180 | dlee | 2013-09-30 13:39:34 -0500 (Mon, 30 Sep 2013) | 28 lines
Optimize how Stasis forwards are dispatched
This patch optimizes how forwards are dispatched in Stasis.
Originally, forwards were dispatched as subscriptions that are invoked
on the publishing thread. This did not account for the vast number of
forwards we would end up having in the system, and the amount of work it
would take to walk though the forward subscriptions.
This patch modifies Stasis so that rather than walking the tree of
forwards on every dispatch, when forwards and subscriptions are changed,
the subscriber list for every topic in the tree is changed.
This has a couple of benefits. First, this reduces the workload of
dispatching messages. It also reduces contention when dispatching to
different topics that happen to forward to the same aggregation topic
(as happens with all of the channel, bridge and endpoint topics).
Since forwards are no longer subscriptions, the bulk of this patch is
simply changing stasis_subscription objects to stasis_forward objects
(which, admittedly, I should have done in the first place.)
Since this required me to yet again put in a growing array, I finally
abstracted that out into a set of ast_vector macros in
asterisk/vector.h.
Review: https://reviewboard.asterisk.org/r/2883/
........
r400181 | dlee | 2013-09-30 13:48:57 -0500 (Mon, 30 Sep 2013) | 28 lines
Remove dispatch object allocation from Stasis publishing
While looking for areas for performance improvement, I realized that an
unused feature in Stasis was negatively impacting performance.
When a message is sent to a subscriber, a dispatch object is allocated
for the dispatch, containing the topic the message was published to, the
subscriber the message is being sent to, and the message itself.
The topic is actually unused by any subscriber in Asterisk today. And
the subscriber is associated with the taskprocessor the message is being
dispatched to.
First, this patch removes the unused topic parameter from Stasis
subscription callbacks.
Second, this patch introduces the concept of taskprocessor local data,
data that may be set on a taskprocessor and provided along with the data
pointer when a task is pushed using the ast_taskprocessor_push_local()
call. This allows the task to have both data specific to that
taskprocessor, in addition to data specific to that invocation.
With those two changes, the dispatch object can be removed completely,
and the message is simply refcounted and sent directly to the
taskprocessor.
Review: https://reviewboard.asterisk.org/r/2884/
........
Merged revisions 399887,400138,400178,400180-400181 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400186 65c4cc65-6c06-0410-ace0-fbb531ad65f3
With the new work in Asterisk 12, there are some uses of the
optional_api that are prone to failure. The details are rather involved,
and captured on [the wiki][1].
This patch addresses the issue by removing almost all of the magic from
the optional API implementation. Instead of relying on weak symbol
resolution, a new optional_api.c module was added to Asterisk core.
For modules providing an optional API, the pointer to the implementation
function is registered with the core. For modules that use an optional
API, a pointer to a stub function, along with a optional_ref function
pointer are registered with the core. The optional_ref function pointers
is set to the implementation function when it's provided, or the stub
function when it's now.
Since the implementation no longer relies on magic, it is now supported
on all platforms. In the spirit of choice, an OPTIONAL_API flag was
added, so we can disable the optional_api if needed (maybe it's buggy on
some bizarre platform I haven't tested on)
The AST_OPTIONAL_API*() macros themselves remained unchanged, so
existing code could remain unchanged. But to help with debugging the
optional_api, the patch limits the #include of optional API's to just
the modules using the API. This also reduces resource waste maintaining
optional_ref pointers that aren't used.
Other changes made as a part of this patch:
* The stubs for http_websocket that wrap system calls set errno to
ENOSYS.
* res_http_websocket now properly increments module use count.
* In loader.c, the while() wrappers around dlclose() were removed. The
while(!dlclose()) is actually an anti-pattern, which can lead to
infinite loops if the module you're attempting to unload exports a
symbol that was directly linked to.
* The special handling of nonoptreq on systems without weak symbol
support was removed, since we no longer rely on weak symbols for
optional_api.
[1]: https://wiki.asterisk.org/wiki/x/wACUAQ
(closes issue ASTERISK-22296)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2797/
........
Merged revisions 397989 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397990 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This prevents XML documentation duplication by expanding channel and
bridge snapshot tags into channel and bridge snapshot parameter sets
with a given prefix or defaulting to no prefix. This also prevents
documentation from becoming fractured and out of date by keeping all
variations of the documentation in template form such that it only
needs to be updated once and keeps maintenance to a minimum.
Review: https://reviewboard.asterisk.org/r/2708/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395985 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch moves the RESTful URL's around to more appropriate
locations for release.
The /stasis URL's are moved to /ari, since Asterisk REST Interface was
a more appropriate name than Stasis-HTTP. (Most of the code still has
stasis_http references, but they will be cleaned up after there are no
more outstanding branches that would have merge conflicts with such a
change).
A larger change was moving the ARI events WebSocket off of the shared
/ws URL to its permanent home on /ari/events. The Swagger code
generator was extended to handle "upgrade: websocket" and
"websocketProtocol:" attributes on an operation.
The WebSocket module was modified to better handle WebSocket servers
that have a single registered protocol handler. If a client
connections does not specify the Sec-WebSocket-Protocol header, and
the server has a single protocol handler registered, the WebSocket
server will go ahead and accept the client for that subprotocol.
(closes issue ASTERISK-21857)
Review: https://reviewboard.asterisk.org/r/2621/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393528 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The library that provides UUID support varies greatly from system to
system. On most Linux distros, it's in libuuid. On OpenBSD, it's in
libe2fs-uuid. On OS X, it is in libsystem.
This patch plays hide-and-seek with UUID support, looking for it in the
three places we know about. It also corrects the Makefile so that it uses
the configured library name and include path.
(closes issue ASTERISK-21816)
Reported by: Brad Latus (snuffy)
Tested by: Brad Latus (snuffy)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390352 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch started out simply as fixing the bouncing tests introduced
in r382685, but required some other changes to give it a decent
implementation.
To fix the bouncing tests, the UserEvent and Newexten AMI events
needed to be refactored to dispatch via Stasis. Dispatching directly
to AMI resulted in those events sometimes getting ahead of the
associated Newchannel events, which would understandably confuse anyone.
I found that instead of creating a zillion different message types and
structures associated with them, it would be preferable to define a
message type that has a channel snapshot and a blob of structured data
with a small bit of additional information. The JSON object model
provides a very nice way of representing structured data, so I went
with that.
* Move JSON support from res_json.c to main/json.c
* Made libjansson-dev a required dependency
* Added an ast_channel_blob message type, which has a channel
snapshot and JSON blob of data.
* Changed UserEvent and Newexten events so that they are dispatched
via ast_channel_blob messages on the channel's topic.
* Got rid of the ast_channel_varset message; used ast_channel_blob
instead.
* Extracted the manager functions converting Stasis channel events to
AMI events into manager_channel.c.
(issue ASTERISK-21096)
Review: https://reviewboard.asterisk.org/r/2381/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383579 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Building Asterisk on Raspbian with hard-float support fails as it uses the
string 'linux-gnueabihf' for host os, as opposed to 'linux-gnueabi'. This patch
modifies the configure script for Asterisk such that it will match on any
string beginning with 'linux-gnueabi', as opposed to requiring an explicit
match.
(closes issue ASTERISK-21006)
Reported by: Christian Hesse
Tested by: Christian Hesse
patches:
linux-gnueabihf.patch uploaded by Christian Hesse (license 6459)
linux-gnueabihf-autoconf.patch uploaded by Christian Hesse (license 6459)
........
Merged revisions 380520 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 380521 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@380522 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* This allows us to remove some special-case build logic.
* 10.5 is down to less that 8% of the OS X market share. 10.4 is down to
under 2%.
* Apple is no longer releasing security updates for 10.5 and earlier.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@379495 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This provides a JSON API by pulling in and wrapping the Jansson JSON
library[1]. The Asterisk API basically mirrors the Jansson
functionality, with a few minor tweaks.
* Some names have been asteriskified to protect the innocent.
* Jansson provides both reference-stealing and reference-borrowing
versions of several API's. The Asterisk API is exclusively
reference-stealing for operations that put elements into arrays and
objects.
* No support for doubles, since we usually don't need that.
* Coming along for the ride is the ast_test_validate macro, which made
the unit tests much easier to write.
[1]: http://www.digip.org/jansson/
(issue ASTERISK-20887)
(closes issue ASTERISK-20888)
Review: https://reviewboard.asterisk.org/r/2264/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@378915 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This provides a common API for dealing with unique identifiers.
The API provides methods to create, parse, copy, and stringify UUIDs.
An accompanying unit test is provided that tests all operations.
(closes issue ASTERISK-20726)
reported by Matt Jordan
Review: https://reviewboard.asterisk.org/r/2217
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@377846 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Make git more attractive for managing work-in-progress. Especially
convenient when a potential patch set needs to be tested on multiple
platforms since one can use git to keep all the test environments in sync
independent of a subversion server.
Now the Asterisk version will show the exact git SHA5 that was used when
building (still appended by "M" if there are local modifications) from a
git clone of the Asterisk repository so the developer can more easily know
what is actually under test.
You will now get this:
$ asterisk -V
Asterisk GIT-1698298
Instead of this:
$ asterisk -V
Asterisk UNKNOWN__and_probably_unsupported
This has zero impact for those not using git with the exception of an
extra test in the configure script to gather git's path. This is
necessary to prevent "sudo make install" from failing since git may not be
in the path in make's shell environment.
(closes issue ASTERISK-20483)
Reported by: Shaun Ruffell
Patches:
0001-build_tools-Allow-Asterisk-to-report-git-SHAs-in-ver.patch (license #5417) patch uploaded by Shaun Ruffell
Modified
........
Merged revisions 375189 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 375190 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 375191 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375192 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The autoconf configuration system had a test for DOT but not for Doxygen. I added the test for Doxygen and did an overhaul of the Makefile check to a much simpler process.
(issue ASTERISK-20259)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@374940 65c4cc65-6c06-0410-ace0-fbb531ad65f3
As mentioned on the review for this, WebRTC has moved towards choosing
DTLS-SRTP as the mechanism for key exchange for SRTP. This commit adds
support for this but makes it available for normal SIP clients as well.
Testing has been done to ensure that this introduces no regressions with
existing behavior and also that it functions as expected.
Review: https://reviewboard.asterisk.org/r/2113/
........
Merged revisions 373229 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373234 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In order to use nested functions on some versions of GCC (e.g. GCC on OS X),
the -fnested-functions flag must be passed to the compiler. This patch adds
detection logic to ./configure to add the flag if necessary. It also adds
a comment to utils.h as to why the nested function needs a prototype.
(closes issue ASTERISK-20399)
Reported by: David M. Lee
Review: https://reviewboard.asterisk.org/r/2102/
........
Merged revisions 373119 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373120 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Matthew Jordan
David M. Lee
Mark Michelson
Joshua Colp
Sean Bright
George Joseph
Richard Mudgett
Kevin Harwell
Kinsey Moore
Jason Parker
Tzafrir Cohen
Walter Doekes
Russell Bryant
Andrew Latham