Created a data model and implemented functionality for an ARI device state
resource. The following operations have been added that allow a user to
manipulate an ARI controlled device:
Create/Change the state of an ARI controlled device
PUT /deviceStates/{deviceName}&{deviceState}
Retrieve all ARI controlled devices
GET /deviceStates
Retrieve the current state of a device
GET /deviceStates/{deviceName}
Destroy a device-state controlled by ARI
DELETE /deviceStates/{deviceName}
The ARI controlled device must begin with 'Stasis:'. An example controlled
device name would be Stasis:Example. A 'DeviceStateChanged' event has also
been added so that an application can subscribe and receive device change
events. Any device state, ARI controlled or not, can be subscribed to.
While adding the event, the underlying subscription control mechanism was
refactored so that all current and future resource subscriptions would be
the same. Each event resource must now register itself in order to be able
to properly handle [un]subscribes.
(issue ASTERISK-22838)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3025/
........
Merged revisions 403134 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403135 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Created the following AMI commands and corresponding events for res_pjsip:
PJSIPShowEndpoints - Provides a listing of all pjsip endpoints and a few
select attributes on each.
Events:
EndpointList - for each endpoint a few attributes.
EndpointlistComplete - after all endpoints have been listed.
PJSIPShowEndpoint - Provides a detail list of attributes for a specified
endpoint.
Events:
EndpointDetail - attributes on an endpoint.
AorDetail - raised for each AOR on an endpoint.
AuthDetail - raised for each associated inbound and outbound auth
TransportDetail - transport attributes.
IdentifyDetail - attributes for the identify object associated with
the endpoint.
EndpointDetailComplete - last event raised after all detail events.
PJSIPShowRegistrationsInbound - Provides a detail listing of all inbound
registrations.
Events:
InboundRegistrationDetail - inbound registration attributes for each
registration.
InboundRegistrationDetailComplete - raised after all detail records have
been listed.
PJSIPShowRegistrationsOutbound - Provides a detail listing of all outbound
registrations.
Events:
OutboundRegistrationDetail - outbound registration attributes for each
registration.
OutboundRegistrationDetailComplete - raised after all detail records
have been listed.
PJSIPShowSubscriptionsInbound - A detail listing of all inbound subscriptions
and their attributes.
Events:
SubscriptionDetail - on each subscription detailed attributes
SubscriptionDetailComplete - raised after all detail records have
been listed.
PJSIPShowSubscriptionsOutbound - A detail listing of all outboundbound
subscriptions and their attributes.
Events:
SubscriptionDetail - on each subscription detailed attributes
SubscriptionDetailComplete - raised after all detail records have
been listed.
(issue ASTERISK-22609)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2959/
........
Merged revisions 403131 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403133 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change prevents channels used as implementation details from
leaking out to ARI. It does this by preventing creation of JSON blobs
of channel snapshots created from those channels and sanitizing JSON
blobs of bridge snapshots as they are created. This introduces a
framework for excluding information from output targeted at Stasis
applications on a consumer-by-consumer basis using channel sanitization
callbacks which could be extended to bridges or endpoints if necessary.
This prevents unhelpful error messages from being generated by
ast_json_pack.
This also corrects a bug where BridgeCreated events would not be
created.
(closes issue ASTERISK-22744)
Review: https://reviewboard.asterisk.org/r/2987/
Reported by: David M. Lee
........
Merged revisions 403069 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403070 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When translating from one format to another it is possible
to inform the translation function that the source frame should
be freed. This was previously done immediately but shortly
afterwards the frame that was freed was accessed and used again.
This change moves code around a bit so that the frame is now
freed after it has been completely used.
(closes issue ASTERISK-22788)
Reported by: Corey Farrell
Patches:
translate-access-after-free-11up.patch uploaded by coreyfarrell (license 5909)
translate-access-after-free-1.8.patch uploaded by coreyfarrell (license 5909)
........
Merged revisions 403014 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 403015 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 403016 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403017 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This fixes a crash when CELGenUserEvent is called from the dialplan
while CEL is disabled. Currently, CEL does not create its topics and
forwards if it is not enabled and external entities may depend on
these topics blindly since they should always be available. This patch
breaks up route creation and topic/forward creation such that the CEL
topics and forwards will always exist while the router and its
associated routes will be torn down and recreated as necessary.
(closes issue ASTERISK-22799)
Review: https://reviewboard.asterisk.org/r/3010/
Reported by: Matt Jordan
........
Merged revisions 402838 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402839 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Similar to how background works, if a say application is called with
this variable set to 'true', 'yes', 'on', etc. then using DTMF while
the say action is in progress will result in the channel jumping to
that extension in the dialplan.
Review: https://reviewboard.asterisk.org/r/3011/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402819 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Two variables were being checked for NULLity immediately
after being declared NULL. I moved the NULL check until
after the variables are allocated.
This allows for the "channelvars" option in manager.conf
to work as intended again.
........
Merged revisions 402767 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402768 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ARI POST calls only accept parameters via the URL's query string.
While this works, it's atypical for HTTP API's in general, and
specifically frowned upon with RESTful API's.
This patch adds parsing for application/x-www-form-urlencoded request
bodies if they are sent in with the request. Any variables parsed this
way are prepended to the variable list supplied by the query string.
(closes issue ASTERISK-22743)
Review: https://reviewboard.asterisk.org/r/2986/
........
Merged revisions 402555 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402557 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Several places in the code were using wait4 while other places were using
waitpid. This change makes all places use waitpid in order to make things
more consistent and since the 'rusage' object passed in/out of wait4 was
never used.
(closes issue ASTERISK-22557)
Reported by: YvesGael
Patches:
asterisk-11.5.1-wait4.patch uploaded by hurdman (license 6537)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402546 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When publishing channel snapshots, we currently compute the caller ID name and
number by giving preference first to ani.{name|number}, then to
id.{name|number}. However, when a channel driver (such as chan_sip) updates the
caller ID, it typically only updates the caller ID stored in id.{name|number}.
This means that we are currently giving preference to stale information.
When looking at the rest of the code base, the only other place where we appear
to use this same logic is in app_amd. Everywhere else, we treat the party
information in ani as being separate to the party information in id.
This patch publishes only the caller ID name and number in the snapshot field
for caller_name and caller_num. Note that the information in ANI is still
available in caller_ani.
Review: https://reviewboard.asterisk.org/r/2992/
........
Merged revisions 402501 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402502 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Made the vector macro API be more like linked lists.
1) Added a name parameter to ast_vector() to name the vector struct.
2) Made the API take a pointer to the vector struct instead of the struct
itself.
3) Added an element cleanup macro/function parameter when removing an
element from the vector for ast_vector_remove_cmp_unordered() and
ast_vector_remove_elem_unordered().
4) Added ast_vector_get_addr() in case the vector element is not a simple
pointer.
* Converted an inline vector usage in stasis_message_router to use the
vector API. It needed the API improvements so it could be converted.
* Fixed topic reference leak in router_dtor() when the
stasis_message_router is destroyed.
* Fixed deadlock potential in stasis_forward_all() and
stasis_forward_cancel(). Locking two topics at the same time requires
deadlock avoidance.
* Made internal_stasis_subscribe() tolerant of a NULL topic.
* Made stasis_message_router_add(),
stasis_message_router_add_cache_update(), stasis_message_router_remove(),
and stasis_message_router_remove_cache_update() tolerant of a NULL
message_type.
* Promoted a LOG_DEBUG message to LOG_ERROR as intended in
dispatch_message().
Review: https://reviewboard.asterisk.org/r/2903/
........
Merged revisions 402429 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402430 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ConfBridge allows custom DTMF menus to be created in the confbridge.conf
file by assigning a DTMF key sequence to a sequence of actions as follows:
DTMF-sequence = action,action...
Unfortunately, the normal config file processing code interprets an
initial '#' character as starting a directive such as #include.
* Add the ability to escape the first non-blank character in a config line
so the '#' character can be used without triggering the directive
processing code.
(closes issue AFS-2)
(closes issue ASTERISK-22478)
Reported by: Nicolas Tanski
Patches:
jira_asterisk_22478_v11.patch (license #5621) patch uploaded by rmudgett (modified)
Review: https://reviewboard.asterisk.org/r/2969/
........
Merged revisions 402407 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 402416 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402417 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Typedefed and added doxegen for the voicemail callback functions.
* Simplified the prototypes for ast_install_vm_functions() and
ast_install_vm_test_functions() to use the new function typedefs.
* Simplified the voicemail callback function pointer variable declarations
to use the new function typedefs.
........
Merged revisions 402398 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402406 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adds the following AMI events, closely following their CLI counterparts:
BridgeDestroy
BridgeKick
BridgeTechnologyList
BridgeTechnologySuspend
BridgeTechnologyUnsuspend
BridgeDestroy kicks an entire bridge, where BridgeKick kicks just one
channel off the bridge. When kicking a channel, specifying the bridge
also (optional) insures it is not removed from the wrong bridge. The
BridgeTechnology events allow viewing and changing suspension status,
which affects only subsequent not active bridging.
(closes ASTERISK-22356)
Reported by: Richard Mudgett
Review: https://reviewboard.asterisk.org/r/2973/
........
Merged revisions 402387 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402388 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For awhile now, we've noticed continuous integration builds hanging on CentOS 6
64-bit build agents. After resolving a number of problems with symbols, strange
locks, and other shenanigans, the problem has persisted. In all cases, gdb
shows the Asterisk process stuck in loader.c on one of the infinite while loops
that calls dlclose repeatedly until success.
The documentation of dlclose states that it returns 0 on success; any other
value on error. It does not state that repeatedly calling it will eventually
clear those errors. Most likely, the repeated calls to dlclose was to force a
close by exhausting the references on the library; however, that will never
succeed if:
(a) There is some fundamental error at work in the loaded library that
precludes unloading it
(b) Some other loaded module is referencing a symbol in the currently loaded
module
This results in Asterisk sitting forever.
Since we have matching pairs of dlopen/dlclose, this patch opts to only call
dlclose once, and log out as an ERROR if dlclose fails to return success. If
nothing else, this might help to determine why on the CentOS 6 64-bit build agent
things are not closing successfully.
Review: https://reviewboard.asterisk.org/r/2970
........
Merged revisions 402287 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 402288 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 402289 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402290 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Based on feedback from ipengineer in #asterisk, when the media indexer
cannot access a sound file on the system (or otherwise fails) Asterisk
displays a "Cannot frob file" error but fails to tell you why. This is
especially problematic as the media_indexer failing will rpevent Asterisk
from starting, as it is in the core.
We now display the errno error messages so folks can figure out what they've
done wrong.
........
Merged revisions 402285 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402286 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Debug messages aren't free. Even when the debug level is sufficiently low such
that the messages are never evaluated, there is a cost to having to parse
Asterisk logs that contain debug messages that (a) fail to convey sufficient
information or (b) occur so frequently as to be next to meaningless. Based on
having to stare at lots of DEBUG messages, this patch makes the following
changes:
* channel.c: When copying variables from a parent channel to a child channel,
specify the channels involved. Do not log anything for a variable that is not
inherited; the fact that it doesn't have an _ or __ already signifies that it
won't be inherited.
* pbx.c: Specify what function evaluation has occurred that created the result.
* translate.c: Bump up the translator path messages to 10. I've never once had
to use these debug messages, and for each format that is registered (on
startup) and unregistered (on shutdown) the entire f^2 matrix is logged out.
For short tests in the Asterisk Test Suite, this should make finding the
actual test much easier.
* xmldoc.c: The debug message that 'blah' is not found in the tree is expected.
Often, description elements - which are not required - are not provided.
This debug message adds no additional value, as it is not indicative of an
error or helpful in debugging which element did not contain a 'blah' element
as a child. If an element is supposed to contain a child element, then that
XML tree should have failed validation in the first place.
Review: https://reviewboard.asterisk.org/r/2966/
........
Merged revisions 402150 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 402151 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 402154 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402155 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Surrogate channels would pop up from time to time in dial message handling.
This would cause a WARNING message to appear, indicating that the Surrogate
channel had no CDR. This patch filters out those channels that have the
internal implementation flag set, such that the WARNING message isn't
displayed.
........
Merged revisions 402090 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402091 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In function ast_rtp_instance_early _bridge_make_compatible the
use of instance 0/1 as arguments doesn't clearly communicate a
direction that the copying of payloads from the source channel
to the destination channel will occur, making it more probable
to have the arguments to ast_rtp_codecs_payloads_copy() put in
the reverse order. This patch renames the arguments with _dst
and _src suffixes and corrects the copy direction.
(closes issue ASTERISK-21464)
Reported by: Kevin Stewart
Review: https://reviewboard.asterisk.org/r/2894/
........
Merged revisions 402000 from http://svn.asterisk.org/svn/asterisk/branches/1.8
Test shows rtpmap:119 being copied per this change, but is not in sip invite
........
Merged revisions 402042 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 402043 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402054 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Also covers ast_app_parse_timelen-fail-zero-length.patch, but the patch was
replaced with one of my own.
(issue ASTERISK-22467)
Reported by: Corey Farrell
Patches:
chan_dahdi-cleanup_push.patch uploaded by coreyfarrell (license 5909)
clicompat-r2.patch uploaded by coreyfarrell (license 5909)
codecs-ilbc-doCPLC.patch uploaded by coreyfarrell (license 5909)
data-cleanup-test-registration.patch uploaded by coreyfarrell (license 5909)
main-asterisk-kill-listener.patch uploaded by coreyfarrell (license 5909)
........
Merged revisions 401704 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 401705 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 401706 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@401707 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The original issue noted that the bridge is orphaned when res_parking.so
is not loaded and a call uses the dial kK flags.
A similar issue happens when only one of the park flags is used. In this
case you have the bridge with one or the other channel left in it. The
channel and bridge will stay around until the channel hangs up.
* Fixed the initial bridge channel push failure to act as if the channel
were kicked out of the bridge. The bridge then decides if it needs to be
dissolved.
(closes issue ASTERISK-22629)
Reported by: Kevin Harwell
Review: https://reviewboard.asterisk.org/r/2928/
........
Merged revisions 401424 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@401425 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This particular debug message, during a stress test, was logged so
often that it appeared that there may be a memory leak in the logger
code. In actuality, there was no memory leak, but the logger thread
was having a hard time keeping up with the demands of the rest of the
system.
Since this debug message has no value at all, the best way to fix the
problem was to just remove the message.
(closes issue AST-1225)
reported by John Bigelow
Patches:
spammy_log.diff uploaded by Mark Michelson (License #5049)
........
Merged revisions 401364 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@401365 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A common idiom in Asterisk is to due something like:
for (ao2_obj = list_beginning; ao2_obj = next_item; ao2_ref(ao2_obj, -1)) {
...do stuff...
}
This is nice because it automatically takes care of the object references
for you. However, there is a pitfall here. If a break statement is in the
for loop, then the current reference is not cleaned up. In some cases, this
is on purpose, but in others there is a leak. This commit fixes the leak
cases.
........
Merged revisions 401248 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@401249 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Most callers of ast_channel_make_compatible() happen before the channels
enter a two party bridge. With the new bridging framework, two party
bridging technologies may also call ast_channel_make_compatible() when
there is more than one thread involved with the two channels.
* Added channel lock protection in set_format() and
ast_channel_make_compatible_helper() when dealing with the channel's
native formats while setting up a translation path.
* Fixed best_src_fmt and best_dst_fmt usage consistency in
ast_channel_make_compatible_helper(). The call to
ast_translator_best_choice() got them backwards.
* Updated some callers of ast_channel_make_compatible() and the function
documentation. There is actually a difference between the two channels
passed in.
* Fixed the deadlock potential in res_fax.c dealing with
ast_channel_make_compatible(). The deadlock potential was already there
anyway because res_fax called ast_channel_make_compatible() with chan
locked.
(closes issue ASTERISK-22542)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2915/
........
Merged revisions 401239 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@401240 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In r378303 the AST_FLAG_DISABLE_DEVSTATE_CACHE flag was added that tells
the devstate system to not cache states for non-real devices. However,
when optimizing away channels (ast_do_masquerade), that flag wasn't
copied.
In my case, using Local devices as queue members created a situation
where the endpoint was considered in use, but the state change of the
device being available again was ignored (not cached). The endpoint
channel was optimized into the (previously) Local channel, but kept
the do-not-cache flag. The end result being that the queue member
apparently stayed in use forever.
(closes issue ASTERISK-22718)
Reported by: Walter Doekes
Review: https://reviewboard.asterisk.org/r/2925/
........
Merged revisions 401178 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 401179 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 401180 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@401181 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Consistently compare format2index() return value so matrix_get() cannot
get passed negative values.
* Optimize ast_translator_best_choice() to defer initializing things until
needed. Also cached the matrix_get() return value rather than repeatedly
calling it.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@401039 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds an /applications API to ARI, allowing explicit management of
Stasis applications.
* GET /applications - list current applications
* GET /applications/{applicationName} - get details of a specific application
* POST /applications/{applicationName}/subscription - explicitly subscribe to
a channel, bridge or endpoint
* DELETE /applications/{applicationName}/subscription - explicitly unsubscribe
from a channel, bridge or endpoint
Subscriptions work by a reference counting mechanism: if you subscript to an
event source X number of times, you must unsubscribe X number of times to stop
receiveing events for that event source.
Review: https://reviewboard.asterisk.org/r/2862
(issue ASTERISK-22451)
Reported by: Matt Jordan
........
Merged revisions 400522 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400523 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch removes said publication for a few reasons:
(1) It is unnecessary. Association of the channel technology with a specific
channel is an implementation detail that should be assumed to "just happen",
and consumers of Stasis don't need to be informed about it.
(2) Publication of said message can now cause crashes, as the actual creation
of a channel in normal locations now stages its messages. As a result, things
that create dummy channels (such as the SIP RTP QOS unit test) and associate
them with a channel technology were now crashing, as the channel itself was
not known by Stasis.
........
Merged revisions 400460 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400461 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In r337595, additional security events were added for chan_sip
authentication failures. The new IEs added to the existing invalid
password event were defined as required IEs, but existing users of the
event did not set the new IEs and could not since they didn't apply to
existing uses. They are now marked as optional IEs.
(closes issue ASTERISK-22578)
Reported by: Matt Jordan
........
Merged revisions 400421 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 400440 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400441 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This introduces usage of an additional libxslt cleanup function,
xsltCleanupGlobals, when the configure script detects that it is
available. Early versions of the library did not include this function.
(closes issue ASTERISK-22570)
Reported by: Corey Farrell
Patches:
xsltCleanupGlobals.patch uploaded by Corey Farrell (License 5909)
........
Merged revisions 400384 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400385 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Channel snapshots have string representations of the channel's native formats.
Prior to this change, the format strings were re-created on ever channel snapshot
creation. Since channel native formats rarely change, this was very wasteful.
Now, string representations of formats may optionally be stored on the ast_format_cap
for cases where string representations may be requested frequently. When formats
are altered, the string cache is marked as invalid. When strings are requested, the
cache validity is checked. If the cache is valid, then the cached strings are copied.
If the cache is invalid, then the string cache is rebuilt and copied, and the cache
is marked as being valid again.
Review: https://reviewboard.asterisk.org/r/2879
........
Merged revisions 400356 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400363 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r400318 | mmichelson | 2013-10-02 17:08:49 -0500 (Wed, 02 Oct 2013) | 12 lines
Remove unnecessary waits from stasis.
Since caches are updated on publisher threads, there is no need
to wait for the cache updates to occur after a stasis message
is published.
In the case of chan_pjsip device state changes, this set of
changes caused an improvement to performance.
Review: https://reviewboard.asterisk.org/r/2890
........
r400319 | mmichelson | 2013-10-02 17:10:54 -0500 (Wed, 02 Oct 2013) | 3 lines
Remove svn:mergeinfo property.
........
Merged revisions 400318-400319 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400335 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Previous code was requiring both name and number to be available.
Also restored a comment block on why caller id is also set on an outgoing
call leg in addition to connected line from earlier versions of Asterisk.
........
Merged revisions 400303 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400304 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When the switch from channel names to channel unique IDs happened, the poor
CLI command got left in the dust. This fixes the command so that users can
once again see how Asterisk is messing up your billing information.
........
Merged revisions 400286 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400287 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* There were several places in ARI where an external library was mallocing
memory that must always be released with free(). When MALLOC_DEBUG is
enabled, free() is redirected to the MALLOC_DEBUG version. Since the
external library call still uses the normal malloc(), MALLOC_DEBUG
complains that the freed memory block is not registered and will not free
it. These cases must use ast_std_free().
* Changed calls to asprintf() and vasprintf() to the equivalent
ast_asprintf() and ast_vasprintf() versions respectively.
........
Merged revisions 400270 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400271 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r399887 | dlee | 2013-09-26 10:41:47 -0500 (Thu, 26 Sep 2013) | 1 line
Minor performance bump by not allocate manager variable struct if we don't need it
........
r400138 | dlee | 2013-09-30 10:24:00 -0500 (Mon, 30 Sep 2013) | 23 lines
Stasis performance improvements
This patch addresses several performance problems that were found in
the initial performance testing of Asterisk 12.
The Stasis dispatch object was allocated as an AO2 object, even though
it has a very confined lifecycle. This was replaced with a straight
ast_malloc().
The Stasis message router was spending an inordinate amount of time
searching hash tables. In this case, most of our routers had 6 or
fewer routes in them to begin with. This was replaced with an array
that's searched linearly for the route.
We more heavily rely on AO2 objects in Asterisk 12, and the memset()
in ao2_ref() actually became noticeable on the profile. This was
#ifdef'ed to only run when AO2_DEBUG was enabled.
After being misled by an erroneous comment in taskprocessor.c during
profiling, the wrong comment was removed.
Review: https://reviewboard.asterisk.org/r/2873/
........
r400178 | dlee | 2013-09-30 13:26:27 -0500 (Mon, 30 Sep 2013) | 24 lines
Taskprocessor optimization; switch Stasis to use taskprocessors
This patch optimizes taskprocessor to use a semaphore for signaling,
which the OS can do a better job at managing contention and waiting
that we can with a mutex and condition.
The taskprocessor execution was also slightly optimized to reduce the
number of locks taken.
The only observable difference in the taskprocessor implementation is
that when the final reference to the taskprocessor goes away, it will
execute all tasks to completion instead of discarding the unexecuted
tasks.
For systems where unnamed semaphores are not supported, a really
simple semaphore implementation is provided. (Which gives identical
performance as the original taskprocessor implementation).
The way we ended up implementing Stasis caused the threadpool to be a
burden instead of a boost to performance. This was switched to just
use taskprocessors directly for subscriptions.
Review: https://reviewboard.asterisk.org/r/2881/
........
r400180 | dlee | 2013-09-30 13:39:34 -0500 (Mon, 30 Sep 2013) | 28 lines
Optimize how Stasis forwards are dispatched
This patch optimizes how forwards are dispatched in Stasis.
Originally, forwards were dispatched as subscriptions that are invoked
on the publishing thread. This did not account for the vast number of
forwards we would end up having in the system, and the amount of work it
would take to walk though the forward subscriptions.
This patch modifies Stasis so that rather than walking the tree of
forwards on every dispatch, when forwards and subscriptions are changed,
the subscriber list for every topic in the tree is changed.
This has a couple of benefits. First, this reduces the workload of
dispatching messages. It also reduces contention when dispatching to
different topics that happen to forward to the same aggregation topic
(as happens with all of the channel, bridge and endpoint topics).
Since forwards are no longer subscriptions, the bulk of this patch is
simply changing stasis_subscription objects to stasis_forward objects
(which, admittedly, I should have done in the first place.)
Since this required me to yet again put in a growing array, I finally
abstracted that out into a set of ast_vector macros in
asterisk/vector.h.
Review: https://reviewboard.asterisk.org/r/2883/
........
r400181 | dlee | 2013-09-30 13:48:57 -0500 (Mon, 30 Sep 2013) | 28 lines
Remove dispatch object allocation from Stasis publishing
While looking for areas for performance improvement, I realized that an
unused feature in Stasis was negatively impacting performance.
When a message is sent to a subscriber, a dispatch object is allocated
for the dispatch, containing the topic the message was published to, the
subscriber the message is being sent to, and the message itself.
The topic is actually unused by any subscriber in Asterisk today. And
the subscriber is associated with the taskprocessor the message is being
dispatched to.
First, this patch removes the unused topic parameter from Stasis
subscription callbacks.
Second, this patch introduces the concept of taskprocessor local data,
data that may be set on a taskprocessor and provided along with the data
pointer when a task is pushed using the ast_taskprocessor_push_local()
call. This allows the task to have both data specific to that
taskprocessor, in addition to data specific to that invocation.
With those two changes, the dispatch object can be removed completely,
and the message is simply refcounted and sent directly to the
taskprocessor.
Review: https://reviewboard.asterisk.org/r/2884/
........
Merged revisions 399887,400138,400178,400180-400181 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400186 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch covers two problems:
1) Currently, when a call is transferred into a parking lot from a bridge
(using either the blind transfer or one touch parking mechanisms), the
application fails to be set to "Park" in the resulting CDR record for
the parked channel. This is due to the ParkedCall message arriving before
the BridgeEnter for the channel entering the parking bridge. The ParkedCall
message isn't handled as the CDR for the channel has already been finalized
(due to the channel having left its two party bridge), and the BridgeEnter -
which creates the new CDR - doesn't have the parking information. This patch
modifies the behavior so that reception of a ParkedCall message will - if
not handled by a CDR chain - cause a new CDR to be created and put into the
Parking state.
2) It fixes a FRACK that occurred when a channel is originated into a parking
space. The DialedPending state - which occurs for both Dialed and Originated
channels - assumed that it couldn't handle the parking transitions due to it
having a Party B; however, Originated channels don't have a Party B. As such,
the existing CDR needs to transition into the parking state - this patch does
that.
Review: https://reviewboard.asterisk.org/r/2877/
(closes issue ASTERISK-22482)
Reported by: Richard Mudgett
........
Merged revisions 400062 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400063 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In r399887, a minor performance improvement was introduced by not allocating
the manager variable struct if it wasn't used. Unfortunately, when directly
accessing an ast_channel struct, manager assumed that the struct was always
allocated. Since this was no longer the case, things got a bit crashy.
This fixes that problem by simply bypassing appending variables if the manager
channel variable struct isn't there.
........
Merged revisions 400058 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400059 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There is a large performance price currently in the CDR engine. We currently
perform two ao2_callback calls on a container that has an entry for every
channel in the system. This is done to create matching pairs between channels
in a bridge.
As such, the portion of the CDR logic that this patch deals with is how we
make pairings when a channel enters a mixing bridge. In general, when a
channel enters such a bridge, we need to do two things:
(1) Figure out if anyone in the bridge can be this channel's Party B.
(2) Make pairings with every other channel in the bridge that is not already
our Party B.
This is a two step process. In the first step, we look through everyone in the
bridge and see if they can be our Party B (single_state_process_bridge_enter).
If they can - yay! We mark our CDR as having gotten a Party B. If not, we keep
searching. If we don't find one, we wait until someone joins who can be our
Party B.
Step 2 is where we changed the logic
(handle_bridge_pairings and bridge_candidate_process). Previously, we would
first find candidates - those channels in the bridge with us - from the
active_cdrs_by_channel container. Because a channel could be a candidate if it
was Party B to an item in the container, the code implemented multiple
ao2_container callbacks to get all the candidates. We also had to store them
in another container with some other meta information. This was rather complex
and costly, particularly if you have 300 Local channels (600 channels!) going
at once.
Luckily, none of it is needed: when a channel enters a bridge (which is when
we're figuring all this stuff out), the bridge snapshot tells us the unique
IDs of everyone already in the bridge. All we need to do is:
For all channels in the bridge:
If the channel is us or our Party B that we got in step 1, skip it
Compare us and the candidate to figure out who is Party A (based on some
specific rules)
If we are Party A:
Make a new CDR for us, append it to our chain, and set the candidate as
Party B
If they are Party A:
If they don't have a Party B:
Make a new CDR for them, append us to their chain, and us as Party B
Otherwise:
Copy us over as Party B on their existing CDR.
This patch does that.
Because we now use channel unique IDs to find the candidates during bridging,
active_cdrs_by_channel now looks up things using uniqueid instead of channel
name. This makes the more complex code simpler; it does, however, have the
drawback that dialplan applications and functions will be slightly slower as
they have to iterate through the container looking for the CDR by name.
That's a small price to pay however as the bridging code will be called a lot
more often.
This patch also does two other minor changes:
(1) It reduces the container size of the channels in a bridge snapshot to 1.
In order to be predictable for multi-party bridges, the order of the
channels in the container must be stable; that is, it must always devolve
to a linked list.
(2) CDRs and the multi-party test was updated to show the relationship between
two dialed channels. You still want to know if they talked - previously,
dialed channels were always ignored, which is wrong when they have
managed to get a Party B.
(closes issue ASTERISK-22488)
Reported by: Richard Mudgett
Review: https://reviewboard.asterisk.org/r/2861/
........
Merged revisions 399666 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399667 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The config framework is supposed to be able to load configs that come from
multiple config files. The principle example is chan_sip's sip.conf and
users.conf. Unfortunately, it only does this correctly on initial load.
This patch causes the module's config to be reloaded entirely if any of
the config files change.
(closes issue ASTERISK-22009)
Reported by: Richard Mudgett
Review: https://reviewboard.asterisk.org/r/2859/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399352 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The remote console continued to have issues with its output. In this case CLI
command output would either not show up (if verbose level = 0) or would contain
verbose prefixes (if verbose level > 0) once log messages were sent to the
remote console. The fix now now adds verbose prefix data to all new lines
contained in a verbose log string.
(closes issue ASTERISK-22450)
Reported by: David Brillert
(closes issue AST-1193)
Reported by: Guenther Kelleter
Review: https://reviewboard.asterisk.org/r/2825/
........
Merged revisions 399267 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 399268 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399269 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Some channels exist merely as an implementation detail in Asterisk, such as
ConfBridge's announcer/recorder channels. These channels should never be
exposed to the outside world, or to interfaces that report on Asterisk. We
already filter out such channels in snapshot processing; however, we failed to
filter out bridge related messages that involved these channels.
This patch filters out bridge related messages that are for such channels. This
prevents a spurious WARNING message from being displayed when those channels
move in and out of bridges.
........
Merged revisions 399146 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399147 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The Dial, Queue, and FollowMe applications need to inhibit the bridging
initial connected line exchange in order to support the 'I' option.
* Replaced the pass_reference flag on ast_bridge_join() with a flags
parameter to pass other flags defined by enum ast_bridge_join_flags.
* Replaced the independent flag on ast_bridge_impart() with a flags
parameter to pass other flags defined by enum ast_bridge_impart_flags.
* Since the Dial, Queue, and FollowMe applications are now the only
callers of ast_bridge_call() and ast_bridge_call_with_flags(), changed the
calling contract to require the initial COLP exchange to already have been
done by the caller.
* Made all callers of ast_bridge_impart() check the return value. It is
important. As a precaution, I also made the compiler complain now if it
is not checked.
* Did some cleanup in parking_tests.c as a result of checking the
ast_bridge_impart() return value.
An independent, but associated change is:
* Reduce stack usage in ast_indicate_data() and add a dropping redundant
connected line verbose message.
(closes issue ASTERISK-22072)
Reported by: Joshua Colp
Review: https://reviewboard.asterisk.org/r/2845/
........
Merged revisions 399136 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399138 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The masquerade super test is failing on v12 with high fence violations and
crashing. The fence violations are showing that party id allocated memory
strings are somehow getting corrupted in the
bridge_reconfigured_connected_line_update() function. The invalid string
values happen to be the freed memory fill pattern.
After much puzzling, I deduced that the
bridge_reconfigured_connected_line_update() is copying a string out of the
source channel's caller party id struct just as another thread is updating
it with a new value. The copying thread is using the old string pointer
being freed by the updating thread. A search of the code found the
unreal_colp_redirect_indicate() routine updating the caller party id's
without holding the channel lock.
A latent bug in v1.8 and v11 hatched in v12 because of the bridging and
connected line changes. :)
(issue ASTERISK-22221)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2839/
........
Merged revisions 398938 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@398939 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes some long-standing bugs in debug threads that were
exacerbated with recent Optional API work in Asterisk 12.
With debug threads enabled, on some systems, there's a lock ordering
problem between our mutex and glibc's mutex protecting its module list
(Ubuntu Lucid, glibc 2.11.1 in this instance). In one thread, the module
list will be locked before acquiring our mutex. In another thread, our
mutex will be locked before locking the module list (which happens in
the depths of calling backtrace()).
This patch fixes this issue by moving backtrace() calls outside of
critical sections that have the mutex acquired. The bigger change was to
reentrancy tracking for ast_cond_{timed,}wait, which wrongly assumed
that waiting on the mutex was equivalent to a single unlock (it actually
suspends all recursive locks on the mutex).
(closes issue ASTERISK-22455)
Review: https://reviewboard.asterisk.org/r/2824/
........
Merged revisions 398648 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 398649 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 398651 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@398652 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When AST_DEVMODE is not defined, ast_asserts are not compiled into the
binary. In some cases, this means variables are not referenced or are
set but unused which causes warnings to show up.
(closes issue ASTERISK-22446)
Reported by: Jason Parker (qwell)
........
Merged revisions 398521 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@398522 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The cleanup code for optional_api needs to happen after all of the optional
API users and providers have unused/unprovided. Unfortunately, regsitering the
atexit() handler at the beginning of main() isn't soon enough, since module
destructors run after that.
........
Merged revisions 398149 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@398150 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Some configuration objects currently won't place nice if reloaded.
Specifically, in this case the pjsip transport objects. Now when
registering an object in sorcery one may specify that the object is
allowed to be reloaded or not. If the object is set to not reload
then upon reloading of the configuration the objects of that type
will not be reloaded. The initially loaded objects of that type
however will remain.
While the transport objects will not longer be reloaded it is still
possible for a user to configure an endpoint to an invalid transport.
A couple of log messages were added to help diagnose this problem if
it occurs.
(closes issue ASTERISK-22382)
Reported by: Rusty Newton
(closes issue ASTERISK-22384)
Reported by: Rusty Newton
Review: https://reviewboard.asterisk.org/r/2807/
........
Merged revisions 398139 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@398140 65c4cc65-6c06-0410-ace0-fbb531ad65f3
With the new work in Asterisk 12, there are some uses of the
optional_api that are prone to failure. The details are rather involved,
and captured on [the wiki][1].
This patch addresses the issue by removing almost all of the magic from
the optional API implementation. Instead of relying on weak symbol
resolution, a new optional_api.c module was added to Asterisk core.
For modules providing an optional API, the pointer to the implementation
function is registered with the core. For modules that use an optional
API, a pointer to a stub function, along with a optional_ref function
pointer are registered with the core. The optional_ref function pointers
is set to the implementation function when it's provided, or the stub
function when it's now.
Since the implementation no longer relies on magic, it is now supported
on all platforms. In the spirit of choice, an OPTIONAL_API flag was
added, so we can disable the optional_api if needed (maybe it's buggy on
some bizarre platform I haven't tested on)
The AST_OPTIONAL_API*() macros themselves remained unchanged, so
existing code could remain unchanged. But to help with debugging the
optional_api, the patch limits the #include of optional API's to just
the modules using the API. This also reduces resource waste maintaining
optional_ref pointers that aren't used.
Other changes made as a part of this patch:
* The stubs for http_websocket that wrap system calls set errno to
ENOSYS.
* res_http_websocket now properly increments module use count.
* In loader.c, the while() wrappers around dlclose() were removed. The
while(!dlclose()) is actually an anti-pattern, which can lead to
infinite loops if the module you're attempting to unload exports a
symbol that was directly linked to.
* The special handling of nonoptreq on systems without weak symbol
support was removed, since we no longer rely on weak symbols for
optional_api.
[1]: https://wiki.asterisk.org/wiki/x/wACUAQ
(closes issue ASTERISK-22296)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2797/
........
Merged revisions 397989 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397990 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Refactored cases where a combination of ast_verbose/options_verbose were
present. Also in general tried to eliminate, in as many places as possible,
where the options_verbose global variable was being used. Refactored the way
local and remote consoles handle verbose message logging in an attempt to
solve the various discrepancies that sometimes would show between the two.
(closes issue AST-1193)
Reported by: Guenther Kelleter
Review: https://reviewboard.asterisk.org/r/2798/
........
Merged revisions 397948 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 397958 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397959 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r397921 | mmichelson | 2013-08-29 10:42:10 -0500 (Thu, 29 Aug 2013) | 6 lines
Resolve assumptions that bridge snapshots would be non-NULL for transfer stasis events.
Attempting to transfer an unbridged call would result in crashes in either CEL code or
in the conversion to AMI messages.
........
r397922 | mmichelson | 2013-08-29 10:42:29 -0500 (Thu, 29 Aug 2013) | 3 lines
Remove extra debug message.
........
Merged revisions 397921-397922 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397923 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Made ast_strftime_locale() ensure that the output buffer is initialized.
The std library strftime() returns 0 and does not touch the buffer if it
has an error. However, the function can also return 0 without an error.
(closes issue ASTERISK-22412)
Reported by: rmudgett
........
Merged revisions 397902 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397903 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fixed return value of ast_cdr_serialize_variables() on error. It needs
to return 0 indicating no CDR variables found.
* Made ast_cdr_serialize_variables() check the return value of
cdr_object_format_property() and assert if nonzero. A member of the
cdr_readonly_vars[] was not handled.
* Removed unused elements from cdr_readonly_vars[]: total_duration,
total_billsec, first_start, and first_answer.
........
Merged revisions 397900 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397901 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Stasis events (which get distributed over the ARI WebSocket) are created
by subscribing to the channel_all_cached and bridge_all_cached topics,
filtering out events for channels/bridges currently subscribed to.
There are two issues with that. First was a race condition, where
messages in-flight to the master subscribe-to-all-things topic would get
sent out, even though the events happened before the channel was put
into Stasis. Secondly, as the number of channels and bridges grow in the
system, the work spent filtering messages becomes excessive.
Since r395954, individual channels and bridges have caching topics, and
can be subscribed to individually. This patch takes advantage, so that
channels and bridges are subscribed to on demand, instead of filtering
the global topics.
The one case where filtering is still required is handling BridgeMerge
messages, which are published directly to the bridge_all topic.
Other than the change to how subscriptions work, this patch mostly just
moves code around. Most of the work generating JSON objects from
messages was moved to .to_json handlers on the message types. The
callback functions handling app subscriptions were moved from res_stasis
(b/c they were global to the model) to stasis/app.c (b/c they are local
to the app now).
(closes issue ASTERISK-21969)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2754/
........
Merged revisions 397816 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397820 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Storing a backtrace for each allocation in anticipation of a memory
management problem is very CPU intensive.
* Added the CLI "memory backtrace {on|off}" command to request that the
backtrace be gathered only on request. The backtrace is off by default.
(issue ASTERISK-22221)
Reported by: Matt Jordan
........
Merged revisions 397809 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397811 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a channel with the OUTGOING flag leaves a bridge, and it will survive
being pulled from the bridge (either because it will execute dialplan,
go into another bridge, or live in a friendly autoloop), we have to clear
the OUTGOING flag. This is the signal to the CDR engine that this channel
is no longer a second class citizen, i.e., it is not "dialed".
The soft hangup flags are only half the picture. If a channel is being
moved from one bridge to another, the soft hangup flags aren't set; however,
the state of the bridge_channel will not be hung up. Since the channel does
not have one of the two hang up states, that implies that the channel is
still technically alive.
This patch modifies the check so that it checks both the soft hangup flags
as well as the bridge_channel state. If either suggests that the channel
is going to persist, we clear the OUTGOING flag.
........
Merged revisions 397690 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397691 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The config options test requires the entire configuration item to be transparent from
the documentation system. So we let it do that too.
As an aside, please do not use this power for evil. Documentation is your friend, and
you really should document your configurations. Hiding your module's configuration
information from the system attempting to enforce some sanity in the universe is something
only a Bond villain would contemplate.
........
Merged revisions 397628 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397629 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When originating channels, ast_pbx_outgoing_* caused the dialed channel
reference to be bumped twice. Ostensibly, this routine is bumping the channel
lifetime such that the channel doesn't get nuked in between locks/unlocks;
however, since the routine should return the dialed channel with its
reference bumped, it only needs to do this one time.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397606 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Starting Asterisk would kick back an ERROR message stating that the Stasis
message type ast_channel_snapshot_type was used prior to initialization.
This occurred due to the caching topic being created prior to the message
type that it depended on.
This patch re-orders the start up such that the message type is initialized
prior to the caching topic. It also checks the return value of the
initialization of the agent login/logoff types.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397585 65c4cc65-6c06-0410-ace0-fbb531ad65f3
DTMF start/end and hold/unhold events have state because a DTMF begin
event and hold event must be ended by something.
The following cases need to be handled when a channel is moved around in
the system.
* When a channel leaves a bridge it may owe a DTMF end event to the
bridge.
* When a channel leaves a bridge it may owe an UNHOLD event to the bridge.
(This case is explicitly ignored because things like transfers need
explicit control over this.)
* When a channel leaves the bridging system it may need to simulate a DTMF
end event to the channel.
* When a channel leaves the bridging system it may need to simulate an
UNHOLD event to the channel.
The patch also fixes the following:
* Fixes playing a file and restarting MOH using the latest MOH class used.
(closes issue ASTERISK-22043)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2791/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397577 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Review https://reviewboard.asterisk.org/r/2580/ tried to fix the mismatch
in memory pools but had a math error determining the buffer size and
didn't address other similar memory pool mismatches.
* Effectively reverted the previous patch to go in the same direction as
trunk for the returned memory pool of ast_bt_get_symbols().
* Fixed memory leak in ast_bt_get_symbols() when BETTER_BACKTRACES is
defined.
* Fixed some formatting in ast_bt_get_symbols().
* Fixed sig_pri.c freeing memory allocated by libpri when MALLOC_DEBUG is
enabled.
* Fixed __dump_backtrace() freeing memory from ast_bt_get_symbols() when
MALLOC_DEBUG is enabled.
* Moved __dump_backtrace() because of compile issues with the utils
directory.
(closes issue ASTERISK-22221)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2778/
........
Merged revisions 397525 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 397528 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397570 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If an option is registered to a type and it is the last known type in the list
of registered types, and the option fails to register, an overrun of the types
array can occur due to the index variable having been already incremented.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397568 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds pass through support for Opus and VP8. That includes:
* Format attribute negotiation for Opus. Note that unlike some other codecs,
the draft RFC specifies having spaces delimiting the attributes in addition
to ';', so you have "attra=X; attrb=Y". This broke the attribute parsing in
chan_sip, so a small tweak was also included in this patch for that.
* A format attribute negotiation module for Opus, res_format_attr_opus
* Fast picture update for VP8. Since VP8 uses a different RTCP packet number
than FIR, this really is specific to VP8 at this time.
Note that the format attribute negotiation in res_pjsip_sdp_rtp was written
by mjordan. The rest of this patch was written completely by Lorenzo Miniero.
Review: https://reviewboard.asterisk.org/r/2723/
(closes issue ASTERISK-21981)
Reported by: Tzafrir Cohen
patches:
asterisk_opus+vp8_passthrough_20130718.patch uploaded by lminiero (License 6518)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397526 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There are times when a configuration option should not have documentation.
1. Some options are registered with a particular object merely as a warning to
users. These options aren't even really 'deprecated' - which has its own
separate API call - they are actually provided by a different configuration
file. The options are merely registered so that the user gets a warning that
a different configuration file provides the item.
2. Some object types - most notably some used by modules that use sorcery - are
completely internal and should never be shown to the user.
3. Sorcery itself has several 'hidden' fields that should never be shown to a
user.
This patch updates the configuration framework and sorcery with additional API
calls that allow a module to register types as internal and options as not
requiring documentation. This bypasses the XML documentation checking.
This patch also re-enables the strict XML documentation checking in trunk, as
well as updates some documentation that was missing.
Review: https://reviewboard.asterisk.org/r/2785/
(closes issue ASTERISK-22359)
Reported by: Matt Jordan
(closes issue ASTERISK-22112)
Reported by: Rusty Newton
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397524 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds a new dialplan application, SayAlphaCase, that performs much
the same function as SayAlpha except that it takes additional options
which allow the user to specify whether the case of each letter should
be announced for uppercase, lowercase, or all letters. Similar
functionality has been added to the SAY ALPHA AGI command via an
optional parameter.
Original Patch by: Kevin Scott Adams
Reported by: Kevin Scott Adams
Review: https://reviewboard.asterisk.org/r/2725/
(closes issue ASTERISK-20782)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397493 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The cause code needs to be passed from the disconnecting channel to the
bridge peers if the disconnecting channel dissolves the bridge.
* Made the call to an app_agent_pool agent disconnect with the busy cause
code if the agent does not ack the call in time or hangs up before acking
the call.
(closes issue ASTERISK-22042)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2772/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397472 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This essentially makes app_queue usable again. From reviewboard:
* Reporting of transfers and call completion is done by creating stasis
subscriptions and listening for specific events in order to determine
when the call is finished (either via a transfer or hangup).
* Dial end messages have been added where they were previously missing.
* Queue stats are properly being updated again once calls have finished.
* AgentComplete stasis messages and AMI events are now occurring again.
* Mixmonitor starting has been factored into its own function and uses the
Mixmonitor API now instead of using ast_pbx_run()
In addition to the changes in app_queue, there are several supplementary changes as well:
* Queue logging now differentiates between attended and blind transfers. A
note about this is in the CHANGES file.
* Local channel optimization events now report more information. This
includes which of the two local channels involved is the destination of
the optimization, the channel that is replacing the destination local channel,
and an identifier so that begin and end events can be matched to each other.
The end events are now sent whether the optimization was successful or not and
includes an indicator of whether the optimization was successful.
* Changes were made to features and bridging_basic so that additional flags may
be set on a bridge. This is necessary because the queue requires that its
bridge only allows move-swap local channel optimizations into the bridge.
(closes issue ASTERISK-21517)
Reported by Matt Jordan
(closes issue ASTERISK-21943)
Reported by Matt Jordan
Review: https://reviewboard.asterisk.org/r/2694
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397451 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Resync the abstract jitter buffer on the following additional control
frames:
AST_CONTROL_HOLD
AST_CONTROL_UNHOLD
AST_CONTROL_T38_PARAMETERS
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397440 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This modifies the behavior of the CEL engine to conform to documented
behavior for Asterisk 12 as defined on the wiki
https://wiki.asterisk.org/wiki/display/AST/Asterisk+12+CEL+Specification
The primary changes deal with removal of the peer field from function
calls since it is no longer directly relevant to the bridging system
and removal of the layer of CDR-like business logic that was providing
a partial emulation of Asterisk 11 CEL functionality. With this change,
there is no longer a distinction between "bridges" and "conferences"
and all participation changes are denoted with bridge enter and bridge
exit messages.
This updates the CEL unit tests to handle these changes and simplifies
some of the macros used in the process.
This also fixes a segfault when attempting to ref a configuration that
failed to load.
Review: https://reviewboard.asterisk.org/r/2788/
(issue ASTERISK-21567)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397431 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The --version-script,asterisk.exports linker flag (and the module
exports) didn't provide _IO_stdin_used in the list of exported symbols.
That causes some kind of libc compatibility mode to kick in, where
stdio file structures (stdout/stderr) land somewhere else. In the
case of the Sparc, they landed on misaligned memory.
This became apparent first after r376428 (Reorder startup sequence)
when a lot of ast_log's were replaced with fprintf's. Writing to
stderr triggered a SIGBUS. (Compared to x86 and amd64 architectures,
the Sparc is very picky about memory alignment.)
(issue ASTERISK-21763)
(issue ASTERISK-21665)
Reported by: Jeremy Kister
Review: https://reviewboard.asterisk.org/r/2760/
........
Merged revisions 397377 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 397378 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397379 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If the file udptl.conf is unavailable at startup, UDPTL will fail to
initialize and while it makes some noise, it isn't immediately
obvious why consumers start to fail when using it. This patch makes
UDPTL load as though an empty config was provided when udptl is
unavailable at startup.
(closes issue ASTERISK-22349)
Reported by: Jonathan Rose
Review: https://reviewboard.asterisk.org/r/2773/
........
Merged revisions 397365 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397366 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For times when a reference in ARI might be ambiguous, the reference is
built as an URI (such as channel:1376341790.3).
An endpoint's channel list is not ambiguous, and in fact the field is
named 'channel_ids', but it had channel URI's instead of channel id's.
This patch changes the list to be the raw id instead of the URI.
(closes issue ASTERISK-22291)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397297 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Added an option flags parameter to interval hooks. Interval hooks now
can specify if the callback will affect the media path or not.
* Added an option flags parameter to the bridge action custom callback.
The action callback now can specify if the callback will affect the media
path or not.
* Made the holding bridge technology reexamine the participant idle mode
option whenever the entertainment is restarted.
* Fixed app_agent_pool waiting agents needlessly starting and stopping MOH
every second by specifying the heartbeat interval hook as not affecting
the media path.
* Fixed app_agent_pool agent alert from restarting the MOH after the alert
beep. The agent entertainment is now changed from MOH to silence after
the alert beep.
* Fixed holding bridge technology to defer starting the entertainment. It
was previously a mixture of immediate and deferred.
* Fixed holding bridge technology to immediately stop the entertainment.
It was previously a mixture of immediate and deferred. If the channel
left the bridging system, any deferred stopping was discarded before
taking effect.
* Miscellaneous holding bridge technology rework coding improvements.
Review: https://reviewboard.asterisk.org/r/2761/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397294 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Performing a blond transfer (attended transfer that is completed
before the transfer recipient picks up) externally through chan_sip
or chan_pjsip would result in lost references to the channels
involved with the transfer as well as their bridge.
(closes issue ASTERISK-22092)
Reported by: mmichelson
Review: https://reviewboard.asterisk.org/r/2766/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396923 65c4cc65-6c06-0410-ace0-fbb531ad65f3
It is not safe to iterate over a macro'd list of ao2 objects, deref them such
that the item's destructor is called, and leave them in the list. The list
macro to iterate over items requires the item to be a valid allocated object
in order to proceed to the next item; with MALLOC_DEBUG on the corruption of
the linked list is caught in the crash.
This patch fixes the invalid access to free'd memory by removing the ao2 item
from the list before de-refing it.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396915 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change protects accesses of res_parking such that it can unload
safely once transient uses of its registered functions are complete.
The parking API has been restructured such that its consumers do not
have access to the vtable exposed by the parking provider, but instead
route through stubs to prevent consumers from holding on to function
pointers.
This adds calls to all the parking unload functions and moves
application loading and unloading into functions in
parking_applications.c similar to the rest of the parts of res_parking.
Review: https://reviewboard.asterisk.org/r/2763/
(closes issue ASTERISK-22142)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396890 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This removes unused code, event types, IE pltypes, and event IE types
where possible and makes several functions private that were once
public. This includes a renumbering of the remaining event and IE types
which breaks binary compatibility with previous versions. The last
remaining consumers of the old event system (or parts thereof) are
main/security_events.c, res/res_security_log.c, tests/test_cel.c,
tests/test_event.c, main/cel.c, and the CEL backends.
Review: https://reviewboard.asterisk.org/r/2703/
(closes issue ASTERISK-22139)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396887 65c4cc65-6c06-0410-ace0-fbb531ad65f3
SIP/foo -- Local;1==Local;2 -- .... -- Local;1==Local;2 -- SIP/bar
Kick a ;1 channel and the chain toward SIP/foo goes away.
Kick a ;2 channel and the chain toward SIP/bar goes away.
This can leave a local channel chain between the kicked ;1 and ;2 channels
that are orphaned until you manually request one of those channels to
hangup or request the bridge to dissolve.
* Added ast_bridge_kick() as a companion to ast_bridge_remove(). The
functional difference is that ast_bridge_kick() may dissolve the bridge as
a result of the channel leaving the bridge.
* Made CLI "bridge kick <bridge> <channel>" use ast_bridge_kick() instead
of ast_bridge_remove() so the bridge can dissolve if needed.
* Renamed bridge_channel_handle_hangup() to ast_bridge_channel_kick() and
made it accessible to other files.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396877 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The horrid structure of the source in the utils directory strikes again.
Moved the _ast_mem_backtrace_buffer[] definition from the logical location
in utils.c to hashtab.c so the aelparse and conf2ael utilities can link.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396850 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Change r395954 reordered some stasis object destruction, which should
have been fine. Unfortunately, it caused some hard to reproduce issues
related to objects being accessed after they had been destroyed. The
patch in r396329 fixed the destruction order problem; this patch
addresses the underlying issue. A few other stasis-related fixes were
also added.
* Add ref-bumps around areas where objects may get transitively
destroyed. (For example, where we lock a topic, unref a subscription,
which unrefs the topic, which explodes the topic when we try to
unlock it.)
* Wrote an extensive doxygen page about Stasis implementation,
relationships between objects, lifecycles of objects, how the
refcounting works, etc. Many other comments were added, corrected, or
cleaned up.
* Added an assert to the topic dtor to catch extra ref decrements.
* Fixed type used after destruction errors for graceful shutdown in
stasis_channels.c.
* I added two unit tests in an attempt to catch destruction order
issues. Since the underlying cause is a race condition, though, the
tests rarely failed even when the code was wrong.
* Fixed a leak in stasis_cache_pattern.c.
(closes issue ASTERISK-22243)
Review: https://reviewboard.asterisk.org/r/2746/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396842 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This reworks the CLI commands used to access sounds information from
"sounds show[ soundid]" to "core show sounds" and
"core show sound <soundid>". This also reworks the "sounds reload" CLI
command to fall under normal module reloading ("module reload sounds").
Also, make trunk build when DEBUG_MALLOC is not enabled.
Review: https://reviewboard.asterisk.org/r/2745/
(closes issue ASTERISK-22141)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396829 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When asterisk has run out of memory (for whatever reason), the alloc
function logs a message. Logging requires memory. A recipe for
infinite recursion.
Stop the recursion by comparing the function call depth for sane values
before attempting another OOM log message.
Review: https://reviewboard.asterisk.org/r/2743/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396822 65c4cc65-6c06-0410-ace0-fbb531ad65f3
By their nature, the connected line and redirecting interception routines
are not supposed to affect the channel's media. Therefore, they should
not suspend and unsuspend the channel while running. The
suspend/unsuspend operations could be expensive depending upon the bridge
and channel technology involved.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396814 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The Bridge API DTMF hook matching would not deal with DTMF end events
only. It required a DTMF begin event to start matching the DTMF hooks.
There are many places in Asterisk where code only generates DTMF end
events without the corresponding begin event. One such place is the AMI
action Atxfer.
* Fixed DTMF hook matching if there is a string of DTMF frames in the read
queue. We could potentially miss some of them before.
* Fixed AMI Atxfer action documentation.
(closes issue ASTERISK-22037)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2752/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396732 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The feature_attended_transfer test is failing due to Asterisk not
passing DTMF in the bridges created for internal attended transfers.
This sets the features initialization routine to set this flag by
default and adjusts the basic bridge and confbridge's use of the
bridging system accordingly as per Richard's suggestion instead of
adjusting this individual case. This change allows the necessary DTMF
to pass through the attended transfer bridge and complete the test
successfully.
Review: https://reviewboard.asterisk.org/r/2759/
(closes issue ASTERISK-22222)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396724 65c4cc65-6c06-0410-ace0-fbb531ad65f3
These problems were all caught by a test in the Asterisk Test Suite that
originated some Local channels and attempted to move the ;2 half of the Local
channel into a bridge using the Bridge AMI action.
(1) When originating a channel, the Newchannel event is emitted quickly;
however, the ;2 channel will not have a pbx thread assigned to it until
after the outbound 'dialing' for the ;1 is complete. Thus, there is a period
of time where the outside world "knows" of the channel's existence and can
influence it but Asterisk has not yet started the dialplan execution thread.
If a Bridge AMI action is taken on the channel, the channel appears to be a
Dialed channel with no PBX thread; hence, the channel will be imparted into
the Bridge by first 'yanking' the channel. At the same time, a race condition
can occur after the yank (but before entering the bridge) when ;1 answers
and starts a PBX on the ;2. The end result currently is an assertion failure
in the Bridging API, as a channel with a PBX is imparted into the Bridge.
There's no way to prevent AMI from attempting to Bridge a channel
immediately after creation; likewise, holding the channel lock through the
entire Dial operation is unwise (and impossible). Instead of treating the
presence of a PBX thread as an error, we simply bail out of the adding the
channel to the bridge through ast_bridge_impart. The Bridge action will
then fail - but we avoid a situation where the channel is both executing
a PBX thread and simultaneously being given a separate thread in the
bridging system (which would be a "bad thing"). Since imparting a channel
with a PBX *can* occur and is not a programming error, the asserts have been
removed.
(2) When the first condition occurs, we have to take one of two actions: either
hangup the yanked channel as it did not enter the bridge, or deref it
because we don't own it. We can determine if we own it or not by testing
for the presence of the PBX thread. If we hung it up directly, we'd crash.
(3) bridge_find_channel does not increase the reference count of the
ast_bridge_channel object. The RAII_VAR usage in ast_bridge_add_channel
thus created a ticking time bomb in whatever bridge the channel moved into,
as the destructor for the ast_bridge_channel object would be called.
Review: https://reviewboard.asterisk.org/r/2741/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396543 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If the thread servicing the dial request isn't created successfully, the
outgoing dial lock will still be held when the function returns. This patch
unlocks the lock on this off nominal path.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396542 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a dial operation fails, the pbx_outgoing_attempt routine will exit without
first having unlocked the outgoing dial lock. This would be a "bad thing".
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396521 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This makes it so that we can detect failures to originate as with
earlier versions of Asterisk, which restores the Asterisk 11 behavior
for the originate manager action. This was causing the ACL tests for
SIP and IAX2 to fail since those tests expected originate failures
when ACLs would cause rejections. Also, this patch fixes crashes in
chan_sip when ACLs rejected peers during registration verification.
(closes issue ASTERISK-22212)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2753/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396498 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The lonely flag is an optional flag for bridge channels that will
make them leave a bridge when a channel leaves if only lonely
channels are in the bridge at that point. This is useful for things
like ending recording and playback channels when they cease to be
interacting with other channels in the bridge.
(closes issue ASTERISK-22117)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2721/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396497 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Changed ast_manager_build_bridge_state_string() to assume an empty
prefix string just like ast_manager_build_channel_state_string().
* Created ast_manager_build_bridge_state_string_prefix() to work just like
ast_manager_build_channel_state_string_prefix().
* Made BridgeMerge AMI event use To/From prefixes.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396417 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does three things:
1. It provides a Surrogate channel technology with a consolidated
"implementation detail flag" on the channel technology. This tells
consumers of Stasis that the creation of this channel is an implementation
detail in Asterisk and can be ignored (if they so choose). This
consolidates the conference recorder/announcer flags as well - these flags
had no additional meaning beyond "ignore this channel please".
2. It modifies allocation of a channel in two ways:
(a) If a channel technology can be determined from the name, we set it
directly in the allocation routine. This prevents the initial
publication of the message from going out with a NULL channel technology
where possible. This lets Stasis consumers get the right channel
technology on the first publication.
(b) It reorganizes allocation to make use of the 'finalized' property on the
channel. This was already used to know that a channel had completely
finished its construction in the masquerade routine; now we also use it
to know whether or not the setting of certain channel properties is
occurring during or post construction. The various set routines were
modified accordingly as well.
3. The masquerade event is now dead, Jim. It no longer served any purpose
whatsoever - if you perform a call pickup you'll get a Pickup event;
if you perform an attended transfer you will still get those events; if you
steal a channel to put it elsewhere you'll get the corresponding NewExten or
BridgeEnter events.
Review: https://reviewboard.asterisk.org/r/2740
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396392 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Backtraces are allocated outside of the usual memory tracking performed by
MALLOC_DEBUG. This allows them to be used by the memory tracking enabled
by that build option; however, it also means that when backtraces are
disposed of they have to be done so outside of the re-defined free.
This patch undef's free prior to disposing of the allocated backtrace when
a backtrace is appended as a result of 'core show locks'.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396391 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This prevents unreal channel optimization during the prequalification
phase when either channel is involved in DTMF emulation. This prevents
a situation where an emulated digit would be missed because the
emulation was never completed.
Review: https://reviewboard.asterisk.org/r/2747/
(closes issue ASTERISK-22214)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396385 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Depending on when a Surrogate channel replaces an existing channel, it is
possible to get a Dial message for the Surrogate channel. When this occurs, no
CDR will exist for the channel as Surrogate channels are ignored. Safely handle
the case when a CDR doesn't exist for a Dial message.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396371 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch implements the controls from ARI recordings. The controls
are:
* DELETE /recordings/live/{recordingName} - stop recording and
discard it
* POST /recordings/live/{recordingName}/stop - stop recording
* POST /recordings/live/{recordingName}/pause - pause recording
* POST /recordings/live/{recordingName}/unpause - resume recording
* POST /recordings/live/{recordingName}/mute - mute recording (record
silence to the file)
* POST /recordings/live/{recordingName}/unmute - unmute recording.
Since this underlying functionality did not already exist, is was
added to app.c by a set of control frames, similar to how playback
control works. The pause/mute control frames are toggles, even though
the ARI controls are idempotent, to be consistent with the playback
control frames.
(closes issue ASTERISK-22181)
Review: https://reviewboard.asterisk.org/r/2697/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396331 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The Stasis changes in r395954 had an unanticipated side effect: messages
published directly to an _all topic does not get forwarded to the
corresponding caching topic.
This patch fixes that by changing how caching topics forward messages,
and how the caching pattern forwards are setup.
For the caching pattern, the all_topic is forwarded to the
all_topic_cached. This forwards messages published directly to the
all_topic to all_topic_cached.
In order to avoid duplicate messages on all_topic_cached, caching topics
were changed to no longer forward uncached messages. Subscribers to an
individual caching topic should only expect to receive cache updates,
and subscription change messages. Since individual caching topics are
new, this shouldn't be a problem.
There are a few minor changes to the pre-cache split behavior.
* For topics changed to use the caching pattern, the all_topic_cached
will forward snapshots in addition to cache updates. Since
subscribers by design ignore unexpected messages, this should be
fine.
* Caching topics that don't use the caching pattern no longer forward
non-cache updates. This makes no difference for the current caching
topics.
* mwi_topic_cached, channel_by_name_topic and
presence_state_topic_cached have no subscribers
* device_state_topic_cached's only subscriber only processes cache
udpates
(issue ASTERISK-22243)
Review: https://reviewboard.asterisk.org/r/2738
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396329 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Dial and Queue would previously apply a new set of features whenever
bridging. These options would be based purely on the options supplied
to the dial/queue applications. This patch changes the function those
applications use to bridge calls so that the features will be added
to the set of existing features for each channel rather than having
them override the existing features.
(closes issue ASTERISK-22209)
Reported by: Jonathan Rose
Review: https://reviewboard.asterisk.org/r/2713/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396245 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Roles are now cleared with each entry into a bridge with addChannel.
If the roles parameter is present, the role specified will be applied
to all channels being added with the addChannel command.
(closes issue ASTERISK-21973)
Reported by: Matt Jordan
https://reviewboard.asterisk.org/r/2691/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396182 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The new res_ari_asterisk.so module presents several config options
from asterisk main. Unfortunately, they aren't exported, so the module
won't load on Linux.
This patch renames the variables, adding the ast_ prefix so they will
be exported.
Review: https://reviewboard.asterisk.org/r/2737
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396166 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The AMI message router is owned wholly by manager.c. Previously, each of the
manager_{item} source files had their own message router and they unsubscribed
from each; once they moved over to using a single message router only a single
unsubscribe became necessary.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396158 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* BridgeEnter now contains the unique ID of the channel that is to be swapped out, if applicable.
* There is a ParkedCallSwap event that is sent when a parked channel has a new channel take its place.
(closes issue ASTERISK-22193)
reported by Mark Michelson
Review: https://reviewboard.asterisk.org/r/2712
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396107 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This moves ast_str_container_alloc, ast_str_container_add,
ast_str_container_remove, and related private functions into
strings.c/h since they really don't belong in astobj2.c/h.
As a result of this move, utils also had to be updated.
Review: https://reviewboard.asterisk.org/r/2719/
(closes issue ASTERISK-22041)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396105 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit is smaller than the initial review placed on review board. This is because
a change to allow for channel drivers to access parking functionality externally was
committed and invalidated quite a few of the changes initially made.
(closes issue ASTERISK-22039)
reported by Matt Jordan
Review: https://reviewboard.asterisk.org/r/2717
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396103 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
* It moves the pickup code out of features.c and into pickup.c
* It removes the vast majority of dead code out of features.c. In particular,
this includes the parking code.
(issue ASTERISK-22134)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396060 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Some regex implementations won't compile an empty string. Assuming that
it's equivalent of a regex that will match anything, use ".?" instead.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396035 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
* It adds support for externally initiated parking requests. In particular,
chan_skinny has a protocol level message that initiates a call park.
This patch now supports that option, as well as the protocol specific
mechanisms in chan_dahdi/sig_analog and chan_mgcp.
* A parking bridge features virtual table has been added that provides
access to the parking functionality that the Bridging API needs. This
includes requests to park an entire 'call' (with little or no additional
information, thank you chan_skinny), perform a blind transfer to a parking
extension, determine if an extension is a parking extension, as well as the
actual "do the parking" request from the Bridging API.
* Refactoring in chan_mgcp, chan_skinny, and chan_dahdi to make use of the new
functions
* The removal of some - but not all - dead parking code from features.c
This also fixed blind transferring a multi-party bridge to a parking lot (which
was implemented, but had at least one code path where using the parking features
kK might not have worked)
Review: https://reviewboard.asterisk.org/r/2710
(closes issue ASTERISK-22134)
Reported by: Matt Jordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396028 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This prevents XML documentation duplication by expanding channel and
bridge snapshot tags into channel and bridge snapshot parameter sets
with a given prefix or defaulting to no prefix. This also prevents
documentation from becoming fractured and out of date by keeping all
variations of the documentation in template form such that it only
needs to be updated once and keeps maintenance to a minimum.
Review: https://reviewboard.asterisk.org/r/2708/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395985 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In working with res_stasis, I discovered a significant limitation to
the current structure of stasis_caching_topics: you cannot subscribe
to cache updates for a single channel/bridge/endpoint/etc.
To address this, this patch splits the cache away from the
stasis_caching_topic, making it a first class object. The stasis_cache
object is shared amongst individual stasis_caching_topics that are
created per channel/endpoint/etc. These are still forwarded to global
whatever_all_cached topics, so their use from most of the code does
not change.
In making these changes, I noticed that we frequently used a similar
pattern for bridges, endpoints and channels:
single_topic ----------------> all_topic
^
|
single_topic_cached ----+----> all_topic_cached
|
+----> cache
This pattern was extracted as the 'Stasis Caching Pattern', defined in
stasis_caching_pattern.h. This avoids a lot of duplicate code between
the different domain objects.
Since the cache is now disassociated from its upstream caching topics,
this also necessitated a change to how the 'guaranteed' flag worked
for retrieving from a cache. The code for handling the caching
guarantee was extracted into a 'stasis_topic_wait' function, which
works for any stasis_topic.
(closes issue ASTERISK-22002)
Review: https://reviewboard.asterisk.org/r/2672/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395954 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Subversion doesn't do quote processing, so it actually thinks that the
closing quote in 'Revision"' is a part of the keyword.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395686 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Performing a module reload of core components causes specific functions
compiled into the Asterisk binary to be reloaded. The table of said functions
was still pointing to the old features reload mechanism, and not the new one.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395672 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This renames all files and API calls from several variants of
Stasis-HTTP to ARI including:
* Stasis-HTTP -> ARI
* STASIS_HTTP -> ARI
* stasis_http -> ari (ast_ari for global symbols, file names as well)
* stasis http -> ARI
Review: https://reviewboard.asterisk.org/r/2706/
(closes issue ASTERISK-22136)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395603 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Most hook callbacks did not need the bridge parameter. The pointer value
could become invalid if the channel is moved to another bridge while it is
executing.
* Fixed some issues in feature_attended_transfer() as a result.
* Reduce the bridge inhibit count in
attended_transfer_properties_shutdown() after it has restored the bridge
channel hooks.
* Removed basic bridge requirement on feature_blind_transfer(). It does
not require the basic bridge like feature_attended_transfer().
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395574 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fixed feature limits to not use special members of struct
ast_bridge_features.
* Fixed memory leak in off nominal paths of bridge_builtin_set_limits().
* Fixed off nominal path in ast_bridge_features_limits_construct() freeing
unallocated memory if it was not called by bridge_builtin_set_limits().
* Made bridge_builtin_interval_features.so unloadable.
* Simplified parking's use of its duration interval hook.
* Made BridgeWait S option not depend upon another module being loaded.
(closes issue ASTERISK-22107)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2701/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395559 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Changes arguments for BridgeWait from BridgeWait(role, options) to
BridgeWait(bridge_name, role, options). Now multiple holding bridges may
be created and referenced by this application.
(closes issue ASTERISK-21922)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2642/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395509 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This removes the previously #if 0'd code. The functionality removed has either
been subsumed by the Bridging API or is no longer applicable.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395400 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch renames the bridging* files to bridge*. This may seem pedantic
and silly, but it fits better in line with current Asterisk naming conventions:
* channel is not "channeling"
* monitor is not "monitoring"
etc.
A bridge is an object. It is a first class citizen in Asterisk. "Bridging" is
the act of using a bridge on a set of channels - and the API that fulfills that
role is more than just the action.
(closes issue ASTERISK-22130)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395378 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Convert interval timers to use the ast_waitfor_nandfds() timeout.
* Remove bridge channel action for intervals. Now the main loop handles
running interval hooks.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395340 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Reduced the number of hook containers to just dtmf_hooks,
interval_hooks, and other_hooks. As a result, several functions dealing
with the different hook containers could be combined.
* Extended the generic hook struct for DTMF and interval hooks instead of
using a variant record.
* Merged the special talk detector hook into the other_hooks container.
* Replaced ast_bridge_features_set_talk_detector() with
ast_bridge_talk_detector_hook().
(issue ASTERISK-22107)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395322 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Add an error message so you know when a feature is not available and you
tried to use it. It usually means the module has not been loaded.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395316 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Ensure that the BridgeInfo command provides adequate state information
about channels by publishing the full channel snapshot for
BridgeInfoChannel subevents. This prevents a two-stage lookup since
most consumers will be keying on channel names instead of uniqueids.
(closes issue ASTERISK-22140)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395270 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
* It pulls out bridge_channel and puts it into its own translation unit
* It adds public and protected headers for bridging_channel. Protected
functions are appropriate only for the Bridging API and sub-classes of a
bridge.
(issue ASTERISK-22130)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395253 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Created a native_dahdi bridging technology for use with the new bridging
API.
The new bridging technology is part of the chan_dahdi channel driver
because it is very specific to that driver. Rather than include the new
code directly into chan_dahdi.c the new bridge technology is in its own
file and linked into chan_dahdi.so. A large part of this change is the
mechanical process of moving declarations around so chan_dahdi.c can be
split up into more files later.
* Changed the bridging core to pass NULL frames into the channel
technologies instead of discarding them. The channel technologies may
need the proding to determine if their configuration is still valid.
(closes issue ASTERISK-21886)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2681/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395154 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This greatly modifies the operation of DTMF attended transfers so that
the full range of options from features.conf applies.
In addition, a new option has been added that allows for a transferer
to switch between bridges during a transfer before completing the
transfer.
(closes issue ASTERISK-21543)
reported by Matt Jordan
Review: https://reviewboard.asterisk.org/r/2654
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395151 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In previous versions of Asterisk, the zombies roamed freely,
unchecked and uncontrolled. They ravaged Asterisk systems with
their biting and their nashing and their pointy teeth.
Sometimes, you couldn't even hang them up.
Now, zombies are rare. They still *technically* exist in certain
places, but they are controlled. Kind of like a zombie zoo: you can
see them, but you can't touch them, and they can't touch you.
Bring your kids!
Because zombies are now population controlled with a very short lifespan,
there's no reason to rename the channels to '%s<ZOMBIE>'. The channels
are guaranteed to die off quickly; the rename really is just confusing
at this point.
This patch finally removes the renaming. On the plus side: this made
my life easier in CDRs during call pickup and attended transfers to
an Asterisk application. It will make other folks lives easier as well!
Review: https://reviewboard.astierks.org/r/2690/
(closes issue ASTERISK-21699)
Reported by: Matt Jordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395135 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The stasis_cache_update messages are somewhat cumbersome to handle
with the stasis_message_router. Since all updates have the same
message type, they are normally handled with the same route.
Since caching itself is a first class component of stasis-core, it
makes sense for the router to handle the cache update messages itself.
This patch adds stasis_message_router_add_cache_update() and
stasis_message_router_remove_cache_update() to handle the routing of
stasis_cache_update messages.
This patch also corrects an issue with manager_{bridging,channels}.c,
where events might be reordered. The reordering occurs because the
components use different message routers, which they needed because
they both needed to route cache update messages. They now both use
manager's router, and add cache routes for just the cache updates they
are interested in.
(closes issue ASTERISK-22038)
Review: https://reviewboard.asterisk.org/r/2677/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395118 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch modifies parsing of cookies in Asterisk's http server by doing an
explicit comparison of the "Cookie" header instead of looking at the first
6 characters to determine if the header is a cookie header. This avoids
parsing "Cookie2" headers and overwriting the previously parsed "Cookie"
header.
Note that we probably should be appending the cookies in each "Cookie"
header to the parsed results; however, while clients can send multiple
cookie headers they never really do. While this patch doesn't improve
Asterisk's behavior in that regard, it shouldn't make it any worse either.
Note that the solution in this patch was pointed out on the issue by the
issue reporter, Stuart Henderson.
(closes issue ASTERISK-21789)
Reported by: Stuart Henderson
Tested by: mjordan, Stuart Henderson
........
Merged revisions 394899 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 394900 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394901 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch modifies manager to allow the allowmultiplelogin setting to be set
on an account by account basis. When set in the general context, it will act
as the default for the defined accounts. Setting it in the account will
override the general setting.
(closes issue ASTERISK-21324)
Reported by: vldmr
patches:
asterisk-manager-per-user-allowmultiplelogin.patch uploaded by vldmr (License 6487)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394881 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds a new CEL event type, AST_CEL_LOCAL_OPTIMIZE, to represent
local channel optimizations. Local channel optimizations were one of
several things conveyed by the now defunct BRIDGE_UPDATE event type.
This also adds a unit test to test generation of this new CEL event.
Review: https://reviewboard.asterisk.org/r/2676/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394870 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds CEL support for blind and attended transfers and call pickup.
During the course of adding this functionality I noticed that
CONF_ENTER, CONF_EXIT, and BRIDGE_TO_CONF events are particularly
useless without a bridge identifier, so I added that as well.
This adds tests for blind transfers, several types of attended
transfers, and call pickup.
The extra field in CEL records now consists of a JSON blob whose fields
are defined on a per-event basis.
Review: https://reviewboard.asterisk.org/r/2658/
(closes issue ASTERISK-21565)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394858 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Made ast_audiohook_detach_list() and ast_audiohook_write_list_empty()
NULL tolerant.
* Made ast_audiohook_detach_list() return void since it is a destructor.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394836 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adds a new channel driver for creating channels for specific purposes
in bridges, primarily to act as either recorders or announcers. Adds
ARI commands for playing announcements to ever participant in a bridge
as well as for recording a bridge. This patch also includes some
documentation/reponse fixes to related ARI models such as playback
controls.
(closes issue ASTERISK-21592)
Reported by: Matt Jordan
(closes issue ASTERISK-21593)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2670/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394809 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds new flags to the channel tech properties that flag it as
different types of implementation detail used exclusively to provide a
feature. Examples of channels that would have these flags include the
announcement and recording channels used by confbridge which are the
only two marked as such by this patch.
Review: https://reviewboard.asterisk.org/r/2633/
(closes issue ASTERISK-21873)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394808 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds more entertainment options to holding bridges and the
bridge_wait application. Also, holding bridges will now use music on
hold as the default entertainment option instead of none. The
parameters for app_bridgewait have changed to (role, options) from
the previous (options) and the options themselves have changed as
well (entertainment options are now contained in an enumerator, role
specification is handled by the role parameter, etc)
(closes issue ASTERISK-21923)
Reported by: Matthew Jordan
Review: https://reviewboard.asterisk.org/r/2679/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394731 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does two things:
1. It moves the debug statement that shows the HTTP sub-protocols being
compared after the string length calculation such that it shows the correct
string length in the output
2. It adds some additional debug that displays when it matches on a
sub-protocol and when it fails
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394701 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The recent changes to update stasis_cache_topics directly from the
publisher thread uncovered a race condition, which was causing asserts
in the /stasis/core tests.
If the caching topic's subscription is the last reference to the
caching topic, it will destroy the caching topic after the final
message has been processed. When dispatching to a different thread,
this usually gave the unsubscribe enough time to finish before
destruction happened. Now, however, it consistently destroys before
unsubscription is complete.
This patch adds an extra reference to the caching topic, to hold it
for the duration of the unsubscription.
This patch also removes an extra unref that was happening when the
final message was received by the caching topic. It was put there
because of an extra ref that was put into the caching topic's
constructor. Both have been removed, which makes the destructor a bit
less confusing.
Review: https://reviewboard.asterisk.org/r/2675/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394686 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Since ast_hangup() is effectively a channel destructor, it should be a
void function.
* Make the few silly callers checking the return value no longer do so.
Only the CDR and CEL unit tests checked the return value.
* Make all callers take advantage of the NULL safe change and remove the
NULL check before the call.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394623 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a channel is hungup, both an APP_END event and a HANGUP event can be
fired. To ensure that HANGUP events occur after APP_END events, the method
callbacks for the APP_END event should be processed prior to the callbacks
for the HANGUP event.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394530 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch attempts to fix some possible race conditions in shutdown of the
CDR engine. It:
* Adds a cleanup handler to only unsubscribe and join on stasis messages during
graceful shutdown. The cleanup handler should execute before the regular atexit
handler, as we want to unsubscribe for any further messages before dispatching
the CDRs.
* The CDRs are now locked when we dispatch them on shutdown.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394469 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The ill conceived chan_agent is no more. It is now replaced by
app_agent_pool.
Agents login using the AgentLogin() application as before. The
AgentLogin() application no longer does any authentication.
Authentication is now the responsibility of the dialplan. (Besides, the
authentication done by chan_agent did not match what the voice prompts
asked for.)
Sample extensions.conf
[login]
; Sample agent 1001 login
; Set COLP for in between calls so the agent does not see the last caller COLP.
exten => 1001,1,Set(CONNECTEDLINE(all)="Agent Waiting" <1001>)
; Give the agent DTMF transfer and disconnect features when connected to a caller.
same => n,Set(CHANNEL(dtmf-features)=TX)
same => n,AgentLogin(1001)
same => n,NoOp(AGENT_STATUS is ${AGENT_STATUS})
same => n,Hangup()
[caller]
; Sample caller direct connect to agent 1001
exten => 800,1,AgentRequest(1001)
same => n,NoOp(AGENT_STATUS is ${AGENT_STATUS})
same => n,Hangup()
; Sample caller going through a Queue to agent 1001
exten => 900,1,Queue(agent_q)
same => n,Hangup()
Sample queues.conf
[agent_q]
member => Local/800@caller,,SuperAgent,Agent:1001
Under the hood operation overview:
1) Logged in agents wait for callers in an agents holding bridge.
2) Caller requests an agent using AgentRequest()
3) A basic bridge is created, the agent is notified, and caller joins the
basic bridge to wait for the agent.
4) The agent is either automatically connected to the caller or must ack
the call to connect.
5) The agent is moved from the agents holding bridge to the basic bridge.
6) The agent and caller talk.
7) The connection is ended by either party.
8) The agent goes back to the agents holding bridge.
To avoid some locking issues with the agent holding bridge, I needed to
make some changes to the after bridge callback support. The after bridge
callback is now a list of requested callbacks with the last to be added
the only active callback. The after bridge callback for failed callbacks
will always happen in the channel thread when the channel leaves the
bridging system or is destroyed.
(closes issue ASTERISK-21554)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2657/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394417 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Peter J Philipp pointed out that there are two checks that ensure that len is
not less than 0. If len is less than 0, the function returns. Having both of
them is clearly redundant.
This removes the second and attempts to clarify (slightly) the error condition.
(closes issue ASTERISK-21772)
Reported by: Peter J Philipp
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394305 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
* It simplifies the Dial handling in CDRs. As a rule, the caller in a dial
relationship is always the Party A. There was some logic present in the
handling of the dial message that could, conceivably, pick the caller
as Party A for the beginning of the dial and the peer as Party A for the
end of the dial. This shouldn't have happened if the code in the bridging
framework was doing its job; however, that was broken and it led to the
FRACK. As it is, this code was overly ocmplex and not needed: the caller,
if present, should always be Party A. Period.
* It properly checks to see if a channel will continue on in the dialplan.
ast_check_hangup - much like cake at the end - is a lie. It will tell
you that you are hungup when you are not. Do not believe it.
I would make this function tell the truth, but I'm nervous that we've been
depending on it sitting on its throne of lies for far too long, and it would
probably break lots of things. So I'm just checking the "internal" soft
hangup flags, like everyone else.
(closes issue ASTERISK-22060)
Reported by: Mark Michelson
(issue ASTERISK-21831)
Reported by: Matt Jordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394290 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
* It adds a virtual table of callbacks to core_unreal. These callbacks can be
supplied by concrete implementations of "unreal" channel drivers, which lets
the unreal channel driver call specific functionality when it performs some
action. Currently, this is done to notify implementations when an
optimization operation has begun, and when an optimization operation has
succeeded.
* It adds Stasis-Core messages for Local channel bridging and Local channel
optimization. Local channel optimization is now two events: a Begin and an
End. Some consumers of Stasis-Core may want to know when an operation is
beginning so that they can 'prepare' their information; others will be more
concerned about when the operation has completed, so that they can 'fix up'
information. Stasis-Core allows for both, as does AMI.
Review: https://reviewboard.asterisk.org/r/2552
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393801 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch reorders certain actions that may raise Stasis messages in the
channel destructor such that they occur before the Stasis cache is cleared.
Once the Stasis cache is cleared, its rather a bad idea to be trying to
publish information about a channel.
(closes issue ASTERISK-22001)
Reported by: Jonathan Rose
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393785 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
* It adds a new soft hangup flag AST_SOFTHANGUP_HANGUP_EXEC that is set when a
channel is executing dialplan hangup logic, i.e., the 'h' extension or a
hangup handler. Stasis messages now also convey the soft hangup flag so
consumers of the messages can know when a channel is executing said
hangup logic.
* It adds a new channel flag, AST_FLAG_DEAD, which is set when a channel is
well and truly dead. Not just a zombie, but dead, Jim. Manager, CEL, CDRs,
and other consumers of Stasis have been updated to look for this flag to
know when the channel should by lying six feet under.
* The CDR engine has been updated to better handle a channel entering and
leaving a bridge. Previously, a new CDR was automatically created when a
channel left a bridge and put into the 'Pending' state; however, this
way of handling CDRs made it difficult for the 'endbeforehexten' logic to
work correctly - there was always a new CDR waiting in the hangup logic
and, even if 'ended', wouldn't be the CDR people wanted to inspect in the
hangup routine. This patch completely removes the Pending state and instead
defers creation of the new CDR until it gets a new message that requires
a new CDR.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393777 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
* It merges Jaco Kroon's patch from ASTERISK-20754, which provides channel
information in the RTCP events. Because Stasis provides a cache, Jaco's
patch was modified to pass the channel uniqueid to the RTP layer as
opposed to a pointer to the channel. This has the following benefits:
(1) It keeps the RTP engine 'clean' of references back to channels
(2) It prevents circular dependencies and other potential ref counting issues
* The RTP engine now allows any RTP implementation to raise RTCP messages.
Potentially, other implementations (such as res_rtp_multicast) could also
raise RTCP information. The engine provides structs to represent RTCP headers
and RTCP SR/RR reports.
* Some general refactoring in res_rtp_asterisk was done to try and tame the
RTCP code. It isn't perfect - that's *way* beyond the scope of this work -
but it does feel marginally better.
* A few random bugs were fixed in the RTCP statistics. (Example: performing an
assignment of a = a is probably not correct)
* We now raise RTCP events for each SR/RR sent/received. Previously we wouldn't
raise an event when we sent a RR report.
Note that this work will be of use to others who want to monitor call quality
or build modules that report call quality statistics. Since the events are now
moving across the Stasis message bus, this is far easier to accomplish. It is
also a first step (though by no means the last step) towards getting Olle's
pinefrog work incorporated.
Again: note that the patch by Jaco Kroon was modified slightly for this work;
however, he did all of the hard work in finding the right places to set the
channel in the RTP engine across the channel drivers. Much thanks goes to Jaco
for his hard work here.
Review: https://reviewboard.asterisk.org/r/2603/
(closes issue ASTERISK-20574)
Reported by: Jaco Kroon
patches:
asterisk-rtcp-channel.patch uploaded by jkroon (License 5671)
(closes issue ASTERISK-21471)
Reported by: Matt Jordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393740 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Legacy channel drivers often include the ability to set a default parking lot
on an endpoint basis; when channels are created for that endpoint, they inherit
the parkinglot option. Parking used to use this option more frequently; while
it is still supported, other options (such as using channel variables or
creation of a custom parkinglot) are supported. More importantly, conveying the
parkinglot information through a channel snapshot isn't terribly useful - it
is rarely (if ever) changed on a channel and some consumers of channel
snapshots, such as ARI, will never use the information.
(closes issue ASTERISK-21968)
Reported by: Matt Jordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393716 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This process also involved a large amount of rework regarding how to redial
the Parker when a channel leaves a parking lot due to timeout. An attended
transfer channel variable has been added to attended transfers to extensions
that will eventually park (but haven't at the time of transfer) as well.
This resolves one of the two BUGBUG comments remaining in res_parking.
(issues ASTERISK-21877)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2638/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393704 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes a few minor bugs and one major one: the CDR by bridge
container was less than helpful. The mechanism previously used to try
and find all of the CDRs in a particular bridge ended up missing CDRs,
resulting in incorrect records.
When looking up CDRs in a bridge, we now just bite the bullet and do
a selection across all existing CDRs.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393599 65c4cc65-6c06-0410-ace0-fbb531ad65f3
While a Stasis configuration file is nice, it shouldn't be mandatory.
We can carry on with default values.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393589 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this patch, the order of procedures on a bridge push was
* Add new bridge channel to bridge's array.
* Pull the swap channel out of the bridge
* Publish a bridge enter event.
The problem is that when the swap channel was pulled from the bridge,
a bridge leave event would be published. The bridge snapshot
published during the bridge leave showed the new channel that had
been added to the bridge, but there had been no bridge enter event
for that channel.
The fix provided here was to change the order a bit
* Add new bridge channel to bridge's array.
* Publish bridge enter event.
* Pull the swap channel out of the bridge.
This makes it so that the bridge snapshots during the stasis
events are accurate.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393586 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is the first step in adding recording support to the
Asterisk REST Interface.
Recordings are stored in /var/spool/recording. Since recordings may be
destructive (overwriting existing files), the API rejects attempts to
escape the recording directory (avoiding issues if someone attempts to
record to ../../lib/sounds/greeting, for example).
(closes issue ASTERISK-21594)
(closes issue ASTERISK-21581)
Review: https://reviewboard.asterisk.org/r/2612/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393550 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The appropriate settings for the Stasis threadpool is very system
specific, depending upon both workload and system configuration.
This patch adds a stasis.conf file which can be used to configure the
key attributes of the threadpool for the Stasis message bus.
(closes issue ASTERISK-21280)
Review: https://reviewboard.asterisk.org/r/2651/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393542 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds authentication support to ARI.
Two authentication methods are supported. The first is HTTP Basic
authentication, as specified in RFC 2617[1]. The second is by simply
passing the username and password as an ?api_key query parameter
(which allows swagger-ui[2] to authenticate more easily).
ARI usernames and passwords are configured in the ari.conf file
(formerly known as stasis_http.conf). The user may be set to
`read_only`, which will prohibit the user from issuing POST, DELETE,
etc. Also, the user's password may be specified in either plaintext,
or encrypted using the crypt() function.
Several other notes about the patch.
* A few command line commands for seeing ARI config and status were
also added.
* The configuration parsing grew big enough that I extracted it to
its own file.
[1]: http://www.ietf.org/rfc/rfc2617.txt [2]:
https://github.com/wordnik/swagger-ui
(closes issue ASTERISK-21277)
Review: https://reviewboard.asterisk.org/r/2649/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393530 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch started with the simple idea of changing the /events data
model to be more sane. The original model would send out events like:
{ "stasis_start": { "args": [], "channel": { ... } } }
The event discriminator was the field name instead of being a value in
the object, due to limitations in how Swagger 1.1 could model objects.
While technically sufficient in communicating event information, it was
really difficult to deal with in terms of client side JSON handling.
This patch takes advantage of a proposed extension[1] to Swagger which
allows type variance through the use of a discriminator field. This had
a domino effect that made this a surprisingly large patch.
[1]: https://groups.google.com/d/msg/wordnik-api/EC3rGajE0os/ey_5dBI_jWcJ
In changing the models, I also had to change the swagger_model.py
processor so it can handle the type discriminator and subtyping. I took
that a big step forward, and using that information to generate an
ari_model module, which can validate a JSON object against the Swagger
model.
The REST and WebSocket generators were changed to take advantage of the
validators. If compiled with AST_DEVMODE enabled, JSON objects that
don't match their corresponding models will not be sent out. For REST
API calls, a 500 Internal Server response is sent. For WebSockets, the
invalid JSON message is replaced with an error message.
Since this took over about half of the job of the existing JSON
generators, and the .to_json virtual function on messages took over the
other half, I reluctantly removed the generators.
The validators turned up all sorts of errors and inconsistencies in our
data models, and the code. These were cleaned up, with checks in the
code generator avoid some of the consistency problems in the future.
* The model for a channel snapshot was trimmed down to match the
information sent via AMI. Many of the field being sent were not
useful in the general case.
* The model for a bridge snapshot was updated to be more consistent
with the other ARI models.
Another impact of introducing subtyping was that the swagger-codegen
documentation generator was insufficient (at least until it catches up
with Swagger 1.2). I wanted it to be easier to generate docs for the API
anyways, so I ported the wiki pages to use the Asterisk Swagger
generator. In the process, I was able to clean up many of the model
links, which would occasionally give inconsistent results on the wiki. I
also added error responses to the wiki docs, making the wiki
documentation more complete.
Finally, since Stasis-HTTP will now be named Asterisk REST Interface
(ARI), any new functions and files I created carry the ari_ prefix. I
changed a few stasis_http references to ari where it was non-intrusive
and made sense.
(closes issue ASTERISK-21885)
Review: https://reviewboard.asterisk.org/r/2639/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393529 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Refactored the AMI events in AOC onto Stasis-Core. The ast_aoc_manager_event
function now publishes a channel snapshot, along with a JSON blob describing
the advice of charge. A "to_ami" handler has also been added that converts
the channel snapshot and AOC event data back into the appropriate data structure
for use with AMI.
(closes issue ASTERISK-21472)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2643/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393449 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds several unit tests for CEL functionality and provides the
requisite framework for creating additional unit tests.
This also cleans up some reference leaks that were occurring in
Stasis-Core message callback code.
Review: https://reviewboard.asterisk.org/r/2646/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393410 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The originate APIs allow callers to provide a pointer to a channel that will
point to the originated channel if the function call succeeds. This is used by AMI
to provide channel information when the originate is performed synchronously.
Unfortunately, if the originate fails in certain ways, the outbound channel is
already disposed of during the dialing itself. This results in the channel being
improperly dereferenced by the internal originate function in pbx.c.
This patch ref bumps the channel to prevent this from occurring. Callers must now
unlock and unref the channel (which is more in line with general channel management
guidelines anyway).
This only affects manager, as it is the only consumer of this API function that
actually passes in a channel pointer.
Review: https://reviewboard.asterisk.org/r/2617/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393361 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In addition to porting those features, they now enjoy greater feature parity
with one another. Specifically, AutoMixMon now has a start and stop
message that can be specified with TOUCH_MIXMONITOR_MESSAGE_START and
TOUCH_MIXMONITOR_MESSAGE_STOP.
(closes issue ASTERISK-21553)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2620/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393309 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Originated channels are a bit odd - they are technically a dialed channel (thus
the party B or peer) but, since there is no caller, they are treated as the
party A. When entering into a bridge that already contains participants, the CDR
engine - if the CDR record is in the Dial state - attempts to match the person
entering the bridge with an existing participant. The idea is that if you dialed
someone and the person you dialed is already in the bridge, you don't need a new
CDR record, the existing CDR record describes the relationship.
Unfortunately, for an originated channel, there is no Party B. If no one was in
the bridge this didn't cause any issues; however, if participants were in the
bridge the CDR engine would attempt to match a non-existant Party B on the
channel's CDR record and explode.
This patch fixes that, and a unit test has been added to cover this case.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393164 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Parking typically occurs when a channel is transferred to a parking extension.
When this occurs, the channel never actually hits the dialplan if the extension
it was transferred to was a "parking extension", that is, the extension in
the first priority calls the Park application. Instead, the channel is
immediately sent into the holding bridge acting as the parking bridge.
This is problematic.
Because we never go out to the dialplan, the CDRs won't transition properly
and the application field will not be set to "Park". CDRs typically swallow
holding bridges, so the CDR itself won't even be generated.
This patch handles this by pulling out the holding bridge handling into its
own CDR state. CDRs now have an explicit parking state that accounts for this
specific subclass of the holding bridge. In addition, we handle the parking
stasis message to set application specific data on the CDR such that the
last known application for the CDR properly reflects "Park".
This is a bit sad since we're working around the odd internal implementation
of parking that exists in Asterisk (and that we had to maintain in order to
continue to meet some odd use cases of parking), but at least the code to
handle that is where it belongs: in CDRs as opposed to sprinkled liberally
throughout the codebase.
This patch also properly clears the OUTBOUND channel flag from a channel when
it leaves a bridge, and tweaks up dialing handling to properly compare the
correct CDR with the channel calling/being dialed.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393130 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Add config framework OPT_CHAR_ARRAY_T and OPT_STRINGFIELD_T non-empty
requirement option. There are cases were you don't want a config option
string to be empty. To require the option string to be non-empty, just
set the aco_option_register() flags parameter to non-zero.
* Updated some config framework enum aco_option_type comments.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393034 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fix locking problems. ast_bridge_move() locks two bridges. To do that,
deadlock avoidance must be done. Called bridge_move_locked() instead.
* Fix inconsistency in the bridge dissolve check callers. The original
caller has already removed the channel from the bridge. The new caller
has not removed the channel from the bridge. Reverted
bridge_dissolve_check() and added bridge_dissolve_check_stolen() to be
used by the new caller on the original bridge after the channel is moved
to the new bridge.
* Fix memory leak of features if the added channel was already in a
bridge.
* Fix incorrect call to ast_bridge_impart().
* Renamed bridge_chan to yanked_chan.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392953 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change removes AST_CEL_BRIDGE_UPDATE since it should no longer be
used because masquerade situations are now accounted for in other ways.
This also refactors usage of AST_CEL_FORWARD to be produced by a Dial
message which has been extended with a "forward" field.
(closes issue ASTERISK-21566)
Review: https://reviewboard.asterisk.org/r/2635/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392829 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes the following memory leaks:
* http.c: The structure containing the addresses to bind to was not being
deallocated when no longer used
* named_acl.c: The global configuration information was not disposed of
* config_options.c: An invalid read was occurring for certain option types.
* res_calendar.c: The loaded calendars on module unload were not being
properly disposed of.
* chan_motif.c: The format capabilities needed to be disposed of on module
unload. In addition, this now specifies the default options for the
maxpayloads and maxicecandidates in such a way that it doesn't cause the
invalid read in config_options.c to occur.
(issue ASTERISK-21906)
Reported by: John Hardin
patches:
http.patch uploaded by jhardin (license 6512)
named_acl.patch uploaded by jhardin (license 6512)
config_options.patch uploaded by jhardin (license 6512)
res_calendar.patch uploaded by jhardin (license 6512)
chan_motif.patch uploaded by jhardin (license 6512)
........
Merged revisions 392810 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392812 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch addresses the following memory/ref counting leaks:
* main/devicestate.c - unsubscribe and join our devicestate message
subscription
* main/cel.c - clean up the datastore and config objects on exist
* main/parking.c - cleanup memory leak of retriever snapshot on message
payload destruction
* res/parking/parking_bridge.c - cleanup memory leak of retrieve snapshot
on message payload destruction
* main/presencestate.c - unsubscribe and join the caching topic on exit
* manager.c - properly unregister the manager action "BlindTransfer"
* sorcery.c - shutdown the threadpool on exit and dispose of any wizards
(issue ASTERISK-21906)
Reported by: John Hardin
patches:
cel.patch uploaded by jhardin (license #6512)
devicestate.patch uploaded by jhardin (license #6512)
manager.patch uploaded by jardin (license #6512)
presencestate.patch uploaded by jhardin (license #6512)
retriever-channel-snapshot.patch uploaded by jhardin (license #6512)
sorcery.patch uploaded by jhardin (license #6512)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392797 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds support for stasis/sounds and stasis/sounds/{ID} queries via
the Asterisk RESTful Interface (ARI, formerly Stasis-HTTP).
The following changes have been made to accomplish this:
* A modular indexer was created for local media.
* A new function to get an ast_format associated with a file extension
was added.
* Modifications were made to the built-in HTTP server so that URI
decoding could be deferred to the URI handler when necessary.
* The Stasis-HTTP sounds JSON documentation was modified to handle
cases where multiple languages are installed in different formats.
* Register and Unregister events for formats were added to the system
topic.
(closes issue ASTERISK-21584)
(closes issue ASTERISK-21585)
Review: https://reviewboard.asterisk.org/r/2507/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392700 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This was caused by forwarding all endpoint messages to manager which includes
channel messages that are related to the endpoint. This change causes only
the PeerStatus messages to be forwarded to manager thus eliminating the
duplicate channel messages.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392627 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Sorcery specific object information is now opaque and allocated with the object.
This means that modules do not need to be recompiled if the sorcery specific part
is changed. It also means that sorcery can store additional information on objects
and ensure it is freed or the reference count decreased when the object goes away.
To facilitate the above a generic sorcery allocator function has been added which
also ensures that allocated objects do not have a lock.
Extended fields have been added thanks to all of the above which allows specific fields
to be marked as extended, and thus simply stored as-is within the object. Type safety
is *NOT* enforced on these fields. A consumer of them has to query and ultimately perform
their own safety check. What does this mean? Extra modules can extend already defined
structures without having to modify them.
Tests have also been included to verify extended field functionality.
Review: https://reviewboard.asterisk.org/r/2585/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392586 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1. Security events
2. Websocket support
3. Diversion header + redirecting support
4. An anonymous endpoint identifier
5. Inbound extension state subscription support
6. PIDF notify generation
7. One touch recording support (special thanks Sean Bright!)
8. Blind and attended transfer support
9. Automatic inbound registration expiration
10. SRTP support
11. Media offer control dialplan function
12. Connected line support
13. SendText() support
14. Qualify support
15. Inband DTMF detection
16. Call and pickup groups
17. Messaging support
Thanks everyone!
Side note: I'm reminded of the song "How Far We've Come" by Matchbox Twenty.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392565 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Extract a useful routine from the softmix bridge technology for other
technologies. Make other technologies use it if they can.
* Made native and 1-1 bridges write to all parties if the bridge channel
writing the frame into the bridge is NULL. Softmix will also do the same
for frame types that make sense.
* Tweak the bridge write routine return value meaning and adjust the
bridge technologies to match.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392514 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The bridge frame queue functions need to return an error status if the
frame failed to be queued because of an error condition. The main calls
that needed to return the status are:
ast_bridge_channel_queue_action_data() and
ast_bridge_channel_write_action_data(). The other return changes are
ripple effects.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392435 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a threadpool is set to autoincrement its threadcount, an issue
may arise when multiple tasks are queued at once into the threadpool. Since
threads start active, each new task would result in autoincrementing the
thread count. So if all threads were active, and a thread's autoincrement
value were 5, then 3 new tasks would result in 15 threads being created even
though the initial autoincrement was sufficient to handle the number of tasks.
This change introduces three behavior changes:
1) New threads in the threadpool start idle instead of active.
2) When a threadpool autoincrements, one thread is activated after the growth.
3) When a threadpool's size is incremented manually, all added threads are activated.
For a more detailed explanation about the changes, please see the Review Board link
at the bottom of this commit.
Review: https://reviewboard.asterisk.org/r/2629
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392318 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For about forever, our build flags for OS X have been slightly off, but
good enough to build and run. Apparently they aren't good enough any more.
Previously, we would compile with macosx-version-min unset and link with
it set. This combination, using GCC 4.8, on Mountain Lion, would create a
bad executable ("Illegal Instruction: 4", or something like that)
This patch consistently sets macosx-version-min for both compiling and
linking, which makes everything happy enough to build and run.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392279 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This finishes moving all CEL linkedid tracking entirely within cel.c
since that is now possible with channel snapshots.
This also removes another CEL linkedid manipulation function from cel.h
that has already been internalized and is neither called nor available
to link against.
Review: https://reviewboard.asterisk.org/r/2632/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392241 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The type of tv_usec is suseconds_t. On Linux, this is usually a long int, but
the specification is actually pretty lax on what it might actually be. And,
sadly, there's no printf/scanf width specifier for suseconds_t. So it could
bit an int or a long, but there's not a great way to tell which it is.
This patch fixes scanf by reading into a long temporary variable that's then
stored into the tv_usec. It fixes printf by casting the tv_usec to a long
first.
This patch also adds some missing width specifiers for some debug statements,
which would cause ".000001" to be displayed at ".1".
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392076 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a channel is originated, its application is typically set to AppDial2,
indicating that it was a dialed channel through the Dial API. Asterisk during
an originate will perform a stack execute to direct the outgoing channel to
a particular place in the dialplan or application. When the stack returns, the
previous application (AppDial2) is restored.
Unfortunately, in the case of an originated channel, the stack restore happens
after hangup. A stasis message is sent notifying everyone that the application
was restored, and this causes a NewExten event to go out after the Hangup event,
violating the basic contract consumers have of the channel lifetime. While we
could preclude the message from going out, restoring the channel's state before
it executed the next higher frame in the stack has to occur, and other places
in the code depend on this behavior.
Since we know that channel hung up (it's a ZOMBIE!), this patch simply checks
to see if the channel has been zombified before sending a NewExten event.
Note that this will fix a number of bouncing tests in the Test Suite. Go tests.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@392005 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is the initial push to update Asterisk's CDR engine for the new
bridging framework. This patch guts the existing CDR engine and builds the new
on top of messages coming across Stasis. As changes in channel state and bridge
state are detected, CDRs are built and dispatched accordingly. This
fundamentally changes CDRs in a few ways.
(1) CDRs are now *very* reflective of the actual state of channels and bridges.
This means CDRs track well with what an actual channel is doing - which
is useful in transfer scenarios (which were previously difficult to pin
down). It does, however, mean that CDRs cannot be 'fooled'. Previous
behavior in Asterisk allowed for CDR applications, channels, and other
properties to be spoofed in parts of the code - this no longer works.
(2) CDRs have defined behavior in multi-party scenarios. This behavior will not
be what everyone wants, but it is a defined behavior and as such, it is
predictable.
(3) The CDR manipulation functions and applications have been overhauled. Major
changes have been made to ResetCDR and ForkCDR in particular. Many of the
options for these two applications no longer made any sense with the new
framework and the (slightly) more immutable nature of CDRs.
There are a plethora of other changes. For a full description of CDR behavior,
see the CDR specification on the Asterisk wiki.
(closes issue ASTERISK-21196)
Review: https://reviewboard.asterisk.org/r/2486/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391947 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In revision 389733, mwi state allocation was placed into its
own function instead of performing the allocation in-line when
required. The issue was that in ast_publish_mwi_state_full(),
the local variable "uniqueid" was no longer being set, but it was
still being used as the topic for MWI. This meant that all MWI
publications ended up being published to the "" (empty string)
mailbox topic. Thus MWI subscriptions for specific mailboxes were
never notified of mailbox state changes.
This change fixes the issue by removing the local uniqueid variable
from ast_publish_mwi_state_full() and instead referencing the
mwi_state->uniqueid field since it has been properly set.
(closes issue ASTERISK-21913)
Reported by Malcolm Davenport
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391921 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Properly search for bridge association structures so that they are
found when expected and handle cases where they don't exist.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391777 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Bridge snapshot events were missing some important transitions that
were noticed in subsequent snapshots. Snapshots will now be published
on all bridge reconfigurations.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391776 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The options should not be registered multiple times. Instead, the configuration just needs
to be reprocessed by the config framework. This also exposed that we were not properly telling
the config framework to treat the configuration processing with the "reload" semantics when
a reload occurred. Both of these errors are fixed now.
Thanks to Richard Mudgett for discovering the leak.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391676 65c4cc65-6c06-0410-ace0-fbb531ad65f3
While very handy, this macro didn't occur until a later version of libjansson.
We'd prefer to be compatible with older versions still - as such, iteration
over key/value pairs in a JSON object have to be done with a little bit more
manual work.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391675 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This pulls bridge-related CEL event triggers out of the code in which
they were residing and pulls them into cel.c where they are now
triggered by changes in bridge snapshots. To get access to the
Stasis-Core parking topic in cel.c, the Stasis-Core portions of parking
init have been pulled into core Asterisk init.
This also adds a new CEL event (AST_CEL_BRIDGE_TO_CONF) that indicates
a two-party bridge has transitioned to a multi-party conference. The
reverse cannot occur in CEL terms even though it may occur in actuality
and two party bridges which receive a AST_CEL_BRIDGE_TO_CONF will be
treated as multi-party conferences for the duration of the bridge.
Review: https://reviewboard.asterisk.org/r/2563/
(closes issue ASTERISK-21564)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391643 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This uses the channel state change events from Stasis-Core to determine
when channel-related CEL events should be raised. Those refactored in
this patch are:
* AST_CEL_CHANNEL_START
* AST_CEL_ANSWER
* AST_CEL_APP_START
* AST_CEL_APP_END
* AST_CEL_HANGUP
* AST_CEL_CHANNEL_END
Retirement of Linked IDs is also refactored.
CEL configuration has been refactored to use the config framework.
Note: Some HANGUP events are not generated correctly because the bridge
layer does not propagate hangupcause/hangupsource information yet.
Review: https://reviewboard.asterisk.org/r/2544/
(closes issue ASTERISK-21563)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391622 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes three memory leaks
* When we load a module with the LOAD_PRIORITY flag, we remove its entry from
the load order list. Unfortunately, we don't free the memory associated with
entry in the list. This patch corrects that and properly frees the memory
for the module in the list.
* When adding a custom format (such as SILK or CELT), the routine for adding
the format was leaking a reference. RAII_VAR cleans this up properly.
* We now de-ref the channel_snapshot appropriately when an endpoint is
disposed of
........
Merged revisions 391489 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 391507 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391521 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes two memory leaks:
* A memory leak in packing channels into a multi-channel blob payload when
publishing dial messages. The multi-channel blob payload does not steal
the references - this approach was chosen because it works well with the
RAII_VAR macro. Unfortunately, this does mean that you actually have to use
the RAII_VAR macro (or manually deref it yourself)
* RTP instances returned as a result of one of the glue operations are ref
counted and have to be de-ref'd appropriately. We now do that, as saying
that we should do it and then not would be silly.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391479 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When checking compatability for the native RTP bridge technology there is a
race condition between clearing framehooks that are destroyed when leaving
certain bridges with certain technologies (such as bridge_native_rtp) and
joining bridges with the bridge_native_rtp technology. Yes, that means a
channel in a native RTP bridge could move to another native RTP bridge and
be considered incompatible with the new native RTP bridge causing it to
revert to a simple bridge technology0. This fixes that bug by ignoring
framehooks that have been marked for destruction when checking for
compatibility with the bridge_native_rtp technology.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391453 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a Stasis message type is defined in a loadable module, handling
those messages for AMI and res_stasis events can be cumbersome.
This patch adds a vtable to stasis_message_type, with to_ami and
to_json virtual functions. These allow messages to be handled
abstractly without putting module-specific code in core.
As an example, the VarSet AMI event was refactored to use the to_ami
virtual function.
(closes issue ASTERISK-21817)
Review: https://reviewboard.asterisk.org/r/2579/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391403 65c4cc65-6c06-0410-ace0-fbb531ad65f3
JSON objects are reference stealing. Hence, if you've RAII_VAR'd some
subobject and want to pack it into another JSON object, you have to bump
the reference count. Using the 'O' option during the pack will bump the
reference count for you.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391314 65c4cc65-6c06-0410-ace0-fbb531ad65f3
People who use the features.conf.sample file from Asterisk 11 and before in trunk were
given a rude awakening when features configuration changes were made. Because it uses the
config framework and the config framework is strict about what is accepted and what isn't,
people that had parking options configured found that Asterisk no longer started. This is
because parking options are currently handled in res_parking.conf instead of features.conf.
This fix seeks to create a temporary band-aid fix for the problem, but having parking options
from the general section be passed to a handler that will simply print that the option is no
longer supported. This will not cause Asterisk to exit.
The fix only applies to options in the general section. There are two main reasons for this:
1) The sample features.conf file only has parking options in the general section. There are no
configured parking lots. Therefore it's not quite as "urgent" to get the parking lot parsing
fixed.
2) The plan is to move parking configuration back from res_parking.conf to features.conf. When
that happens, the parking lots will also be addressed at that time.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391269 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds support for Stasis applications to receive bridge-related
messages when the application shows interest in a given bridge.
To supplement this work and test it, this also adds support for the
following bridge-related Stasis-HTTP functionality:
* GET stasis/bridges
* GET stasis/bridges/{bridgeId}
* POST stasis/bridges
* DELETE stasis/bridges/{bridgeId}
* POST stasis/bridges/{bridgeId}/addChannel
* POST stasis/bridges/{bridgeId}/removeChannel
Review: https://reviewboard.asterisk.org/r/2572/
(closes issue ASTERISK-21711)
(closes issue ASTERISK-21621)
(closes issue ASTERISK-21622)
(closes issue ASTERISK-21623)
(closes issue ASTERISK-21624)
(closes issue ASTERISK-21625)
(closes issue ASTERISK-21626)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391199 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Topics need to be disposed of prior to the message types that are published
on them. This includes topic pools. This prevents an assertion from being
raised on shutdown.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391040 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This moves the initialization call behind the protection against
reloads. We don't want to re-add message router routes during
reloads.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391016 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch allows astmm to access the backtrace generation code in Asterisk.
When memory is allocated, a backtrace is created and stored with the memory
region that tracks the allocation. If a memory corruption is detected, the
backtrace is printed to the astmm log. The backtrace will make use of the
BETTER_BACKTRACES build option if available.
As a result, this patch moves the backtrace generation code into its own file
and uses the non-wrapped versions of the C library memory allocation routines.
This allows the memory allocation code to safely use the backtrace generation
routines without infinitely recursing.
Review: https://reviewboard.asterisk.org/r/2567
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391012 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Added a start technology callback that technologies can use to start
bridging operations. It is expected that native bridges will find this
useful.
* Factored out bridge_channel_complete_join().
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390991 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A three party bridge uses the softmix bridging technology. This
technology has a dedicated thread used to perform the analog mixing. When
one of these parties leaves the bridge, the bridge technology is changed
from the softmix technology to a two-party mixing technology. Changing
technologies is done by removing channels from the old technology and
adding them to the new technology. Since the remaining channels do not
leave the bridge, the softmix mixing thread could continue to process all
channels in the bridge. If the bridge code is not able to start
destruction of the softmix technology before the softmix mixing thread
wakes up, a crash happens.
* Added a stop technology callback that technologies can use to request
any helper threads to stop in preparation for being destroyed.
(closes issue AST-1156)
Reported by: John Bigelow
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390975 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Stasis cache clear message payloads now consist of a stasis_message
representative of the message to be cleared from the cache. This allows
multiple parallel caches to coexist and be cleared properly by the same
cache clear message even when keyed on different fields.
This change fixes a bug where multiple cache clears could be posted for
channels. The cache clear is now produced in the destructor instead of
ast_hangup.
Additionally, dummy channels are no longer capable of producing channel
snapshots.
Review: https://reviewboard.asterisk.org/r/2596
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390830 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Change applicationmap and featuregroup to replace duplicate config items
rather than reject them.
* Remove some unneeded warning messages when getting the applicationmap
allows duplicates from DYNAMIC_FEATURES.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390803 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When reading from a config file, it's important to reject duplicates. Otherwise,
featuregroups will have ambiguity when pointing to applicationmap items. However,
when constructing the channel's current applicationmap, we don't care about duplicate
names since it's the DTMF that identifies a feature, not the name.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390787 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* The channel variable ATTENDED_TRANSFER_COMPLETE_SOUND is no longer
channel driver specific. If the channel variable is set on the
transferrer channel, the sound will be played to the target of an attended
transfer.
* The channel variable BRIDGEPEER becomes a comma separated list of peers
in a multi-party bridge. The BRIDGEPEER value can have a maximum of 10
peers listed. Any more peers in the bridge will not be included in the
list. BRIDGEPEER is not valid in holding bridges like parking since those
channels do not talk to each other even though they are in a bridge.
* The channel variable BRIDGEPVTCALLID is only valid for two party bridges
and will contain a value if the BRIDGEPEER's channel driver supports it.
* The channel variable DYNAMIC_PEERNAME is redundant with BRIDGEPEER and
is removed. The more useful DYNAMIC_WHO_ACTIVATED gives the channel name
that activated the dynamic feature.
* The channel variables DYNAMIC_FEATURENAME and DYNAMIC_WHO_ACTIVATED are
set only on the channel executing the dynamic feature. Executing a
dynamic feature on the bridge peer in a multi-party bridge will execute it
on all peers of the activating channel.
(closes issue ASTERISK-21555)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2582/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390771 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Features configuration is handled in its own API in
features_config.h and features_config.c. This way, features
configuration is accessible to anything that needs it.
In addition, features configuration has been altered to
be more channel-oriented. Most callers of features API
code will be supplying a channel so that the individual
channel's settings will be acquired rather than the global
setting.
Missing from this commit is XML documentation for the
features configuration. That will be handled in a separate
commit.
Review: https://reviewboard.asterisk.org/r/2578/
(issue ASTERISK-21542)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390751 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fix external attended transfer bridge move/swap method. One of the
transferrer channels was not kicked out of the bridge.
* Fix several off-nominal extended attended transfer paths. Mainly the
channels involved needed to be hung up or kicked out of the bridge.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390613 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The ast_multi_channel_blob_get_channel function does not bump the refcount on
the channel snapshot that it returns. This is typical for Stasis message
payloads, since being immutable means that the object won't get unreffed out
from underneath you.
The manager code for chanspy was unreffing the snapshots it got out of the
multi-channel blob, which was one unref too many.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390584 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change is used to make bridge hook removal more generic. This way,
depending on the circumstance, the appropriate bridge hooks may be
removed.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390510 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When channels are added to an endpoint, the code originally posted a channel
snapshot to the endoint's topic directly. Turns out, this is a bad idea.
This causes the endpoint to see an inconsistent view of the channel, since it
will later receive in-flight messages with old channel snapshots.
This patch instead just publishes channel state immediately after setting up
the forward to the endpoint's topic. This gives the endpoints a consistent
view of the channel's state.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390472 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The library that provides UUID support varies greatly from system to
system. On most Linux distros, it's in libuuid. On OpenBSD, it's in
libe2fs-uuid. On OS X, it is in libsystem.
This patch plays hide-and-seek with UUID support, looking for it in the
three places we know about. It also corrects the Makefile so that it uses
the configured library name and include path.
(closes issue ASTERISK-21816)
Reported by: Brad Latus (snuffy)
Tested by: Brad Latus (snuffy)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390352 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Refactor some channel blob publishing code to use
ast_channel_publish_blob now that it is available and fix a JSON
reference leak that was occurring during varset publishing.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390317 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* DTMF attended and blind transfers have hold/unhold behavior restored.
* External attended and blind transfers unhold the transfered party when
the transfer is initiated.
* Made prohibit blind transferring a bridge marked as masquerade only.
(ConfBridge bridges)
* Made running an application or playing a file inside a bridge post the
hold/unhold messages if MOH is requested.
Review: https://reviewboard.asterisk.org/r/2574/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390289 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch addresses issues during immediate shutdowns, where modules
are not unloaded, but Asterisk atexit handlers are run.
In the typical case, this usually isn't a big deal. But the
introduction of the Stasis message bus makes it much more likely for
asynchronous activity to be happening off in some thread during
shutdown.
During an immediate shutdown, Asterisk skips unloading modules. But
while it is processing the atexit handlers, there is a window of time
where some of the core message types have been cleaned up, but the
message bus is still running. Specifically, it's still running
module subscriptions that might be using the core message types. If a
message is received by that subscription in that window, it will
attempt to use a message type that has been cleaned up.
To solve this problem, this patch introduces ast_register_cleanup().
This function operates identically to ast_register_atexit(), except
that cleanup calls are not invoked on an immediate shutdown. All of
the core message type and topic cleanup was moved from atexit handlers
to cleanup handlers.
This ensures that core type and topic cleanup only happens if the
modules that used them are first unloaded.
This patch also changes the ast_assert() when accessing a cleaned up
or uninitialized message type to an error log message. Message type
functions are actually NULL safe across the board, so the assert was a
bit heavy handed. Especially for anyone with DO_CRASH enabled.
Review: https://reviewboard.asterisk.org/r/2562/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390122 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Check the returned bridged pointer for NULL to avoid a crash. It looks
like chan_agent is returning a NULL pointer when it probably should be
returning a pointer to the channel the Agent channel is pretending to be.
(closes issue ASTERISK-21793)
Reported by: Rodrigo P. Telles
Patches:
jira_asterisk_21793_v1.8.patch (license #5621) patch uploaded by rmudgett
Tested by: Rodrigo P. Telles
........
Merged revisions 390044 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 390047 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390068 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When ast_channel_cached_blob_create was merged,
ast_channel_blob_create_from_cache was partially removed in an
unresolved merge conflict. This restores ast_channel_blob_create_from_cache
and refactors usage of ast_channel_cached_blob_create (requires an
ast_channel) to use ast_channel_blob_create_from_cache (requires a
channel uniqueid) instead.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389974 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The attended transfer API call can complete the attended transfer in a number of ways
depending on the current bridged states of the channels involved.
The hiding of masquerades is done in some bridging-related functions, such as the manager
Bridge action and the Bridge dialplan application. In addition, call pickup was edited
to "move" a channel rather than masquerade it.
Review: https://reviewboard.asterisk.org/r/2511
(closes issue ASTERISK-21334)
Reported by Matt Jordan
(closes issue Asterisk-21336)
Reported by Matt Jordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389848 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Caching topics will during initialization attempt to reference
their message type. The message type therefore has to be
initialized prior to the topic to prevent the dreaded assertion.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389813 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Initialize a Stasis-Core message type prior to initializing a caching topic.
The caching topic will attempt to use the message type.
* Don't attempt to publish Stasis-Core messages from remote console connections.
They aren't the main process; they shouldn't attempt to behave as it (they also
don't have the infrastructure to do so)
* Don't treat a JSON object as an ao2 object (whoops)
* In asterisk.c, ref bump the JSON even package that is distributed with the
event meta data. The callers assume that they own the reference, and the packing
routine steals references.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389785 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch moves a number of AMI events over to the Stasis-Core message bus.
This includes:
* ChanSpyStart/Stop
* MonitorStart/Stop
* MusicOnHoldStart/Stop
* FullyBooted/Reload
* All Voicemail/MWI related events
In addition, it adds some Stasis-Core and AMI support for generic AMI messages,
refactors the message router in AMI to use a single router with topic
forwarding for the topics that AMI cares about, and refactors MWI message
types and topics to be more name compliant.
Review: https://reviewboard.asterisk.org/r/2532
(closes issue ASTERISK-21462)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389733 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When Asterisk shuts down and shuts down the loggin gsubsystem, any
messages currently in flight will not get logged. This patch prevents the
loop writing messages from breaking out prematurely, such that all of the
messages are logged.
(closes issue ASTERISK-21716)
Reported by: Corey Farrell
patches:
logger-process-all-messages.patch uploaded by Corey Farrell (license 5909)
........
Merged revisions 389676 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 389677 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389680 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk REST interface.
This adds the /playback/{playbackId}/control resource, which may be
POSTed to to pause, unpause, reverse, forward or restart the media
playback.
Attempts to control a playback that is not currently playing will
either return a 404 Not Found (because the playback object no longer
exists) or a 409 Conflict (because the playback object is still in the
queue to be played).
This patch also adds skipms and offsetms parameters to the
/channels/{channelId}/play resource.
(closes issue ASTERISK-21587)
Review: https://reviewboard.asterisk.org/r/2559
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389603 65c4cc65-6c06-0410-ace0-fbb531ad65f3
and GET /playback/{playbackId}.
This allows an external application to initiate playback of a sound on a
channel while the channel is in the Stasis application.
/play commands are issued asynchronously, and return immediately with
the URL of the associated /playback resource. Playback commands queue up,
playing in succession. The /playback resource shows the state of a
playback operation as enqueued, playing or complete. (Although the
operation will only be in the 'complete' state for a very short time,
since it is almost immediately freed up).
(closes issue ASTERISK-21283)
(closes issue ASTERISK-21586)
Review: https://reviewboard.asterisk.org/r/2531/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389587 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The caching topic (which refers to the message type) was created before the
message type. If the initial subscription message gets processed before
the type can be initialized, the assertion about using an uninitialized type
fires.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389519 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Breaks many things until they can be reworked. A partial list:
chan_agent
chan_dahdi, chan_misdn, chan_iax2 native bridging
app_queue
COLP updates
DTMF attended transfers
Protocol attended transfers
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389378 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This may alleviate some of the CDR woes with originated channels, as CDRs
do like to know when a channel was originated. Eventually this will get
converted to be a channel flag, so its location is still good to know
post the great CDR shakeup of 2013.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389306 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In r388005, macros were introduced to consistently define message
types. This added an assert if a message type was used either before
it was initialized or after it had been cleaned up. It turns out that
this assertion fires during shutdown.
This actually exposed a hidden shutdown ordering problem. Since
unsubscribing is asynchronous, it's possible that the message types
used by the subscription could be freed before the final message of
the subscription was processed.
This patch adds stasis_subscription_join(), which blocks until the
last message has been processed by the subscription. Since joining was
most commonly done right after an unsubscribe, a
stasis_unsubscribe_and_join() convenience function was also added.
Similar functions were also added to the stasis_caching_topic and
stasis_message_router, since they wrap subscriptions and have similar
problems.
Other code in trunk was refactored to join() where appropriate, or at
least verify that the subscription was complete before being
destroyed.
Review: https://reviewboard.asterisk.org/r/2540
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389011 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does two things:
* It fixes a bug where the outbound channel's application/data set by the
dialing API/app_dial is not communicated until the channel is hung up.
If that happens, AMI would incorrectly send a NewExten event immediately
after a Hangup. This isn't really AMI's fault, as the dialing APIs never
communicated the 'helpful' app/data on the outbound channel until it was
hungup.
* It makes public sending a stasis message about a change in channel state.
This is useful enough that - for now at least - it should be public. If
operations on a channel go to being more coarse-grained, this function
could be made private again.
Review: https://reviewboard.asterisk.org/r/2548
Note that this problem was found and reported by Matt DiMeo.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@388976 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If DEBUG_THREADS is enabled __ast_rwlock_destroy causes a segfault while trying
to access a possible NULL t->track object. A NULL check has been added before
trying to access the memory.
(closes issue ASTERISK-21724)
Reported by: Corey Farrell
Fixed by: Corey Farrell
Patches:
ast_rwlock_destroy-segv.patch uploaded by Corey Farrell (license 5909)
........
Merged revisions 388838 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 388839 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@388840 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The debug versions of ao2_ref() should only be used if REF_DEBUG is
enabled so nothing is written to /tmp/refs unexpectedly.
(closes issue ASTERISK-21785)
Reported by: abelbeck
Patches:
jira_asterisk_21785_v11.patch (license #5621) patch uploaded by rmudgett
Tested by: abelbeck
........
Merged revisions 388700 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@388701 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The CALL-ID (ie [C-00000074]) is missing when logging to syslog. This was just
an oversight when this feature was added.
* Add CALL-IDs when using syslog
(closes issue ASTERISK-21430)
Reported by: Nikola Ciprich
Tested by: Nikola Ciprich, Michael L. Young
Patches:
asterisk-21430-syslog-callid_trunk.diff by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2526/
........
Merged revisions 388605 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@388617 65c4cc65-6c06-0410-ace0-fbb531ad65f3
I've noticed when doing a graceful shutdown that the res_stasis_http.so
module gets unloaded before the modules that use it, which causes some
asserts during their unload.
While r386928 was a quick hack to get it to not assert and die, this
patch increases the use counts on res_stasis.so and res_stasis_http.so
properly. It's a bigger change than I expected, hence the review instead
of just committing it.
Review: https://reviewboard.asterisk.org/r/2489/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@388350 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change adds a framework in res_stasis for handling events from
channel topics. JSON event generation and validation code is created
from event documentation in rest-api/api-docs/events.json to assist in
JSON event generation, ensure consistency, and ensure that accurate
documentation is available for ALL events that are received by
res_stasis applications.
The userevent application has been refactored along with the code that
handles userevent channel blob events to pass the headers as key/value
pairs in the JSON blob. As a side-effect, app_userevent now handles
duplicate keys by overwriting the previous value.
Review: https://reviewboard.asterisk.org/r/2428/
(closes issue ASTERISK-21180)
Patch-By: Kinsey Moore <kmoore@digium.com>
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@388275 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The <arpa/nameser_compat.h> was introduced way back in OS X Panther, which
itself was end-of-lifed back in 2007. We can assume that any OS X machine
we build on will need that header file :-)
Why bother removing it? The flag we're checking (__APPLE_CC__) is actually
Apple's build number. Self-compiled versions of GCC (such as installing the
latest version of GCC from homebrew) sets the value to 0, making it useless
for this sort of compile flaggery.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@388045 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When we first introduced the channel blob types, the JSON blobs were
self identifying by a required "type" field in the JSON object
itself. This, as it turns out, was a bad idea.
When we introduced the message router, it was useless for routing based
on the JSON type. And messages had two type fields to check: the
stasis_message_type() of the message itself, plus the type field in the
JSON blob (but only if it was a blob message).
This patch corrects that mistake by removing the required type field
from JSON blobs, and introducing first class stasis_message_type objects
for the actual message type.
Since we now will have a proliferation of message types, I introduced a
few macros to help reduce the amount of boilerplate necessary to set
them up.
Review: https://reviewboard.asterisk.org/r/2509
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@388005 65c4cc65-6c06-0410-ace0-fbb531ad65f3
An endpoint is an external device/system that may offer/accept
channels to/from Asterisk. While this is a very useful concept for end
users, it is surprisingly not a core concept within Asterisk itself.
This patch defines ast_endpoint as a separate object, which channel
drivers may use to expose their concept of an endpoint. As the channel
driver creates channels, it can use ast_endpoint_add_channel() to
associate channels to the endpoint. This updated the endpoint
appropriately, and forwards all of the channel's events to the
endpoint's topic.
In order to avoid excessive locking on the endpoint object itself, the
mutable state is not accessible via getters. Instead, you can create a
snapshot using ast_endpoint_snapshot_create() to get a consistent
snapshot of the internal state.
This patch also includes a set of topics and messages associated with
endpoints, and implementations of the endpoint-related RESTful
API. chan_sip was updated to create endpoints with SIP peers, but the
state of the endpoints is not updated with the state of the peer.
Along for the ride in this patch is a Stasis test API. This is a
stasis_message_sink object, which can be subscribed to a Stasis
topic. It has functions for blocking while waiting for conditions in
the message sink to be fulfilled.
(closes issue ASTERISK-21421)
Review: https://reviewboard.asterisk.org/r/2492/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@387932 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change adds the ability for modules to add themselves as observers
to sorcery object types. Observers can be notified when objects are
created, updated, or deleted as well as when the object type is loaded or
reloaded. Observer notifications are done using a thread pool in a serialized
fashion so the caller of the sorcery API calls is minimally impacted.
This also adds the ability to create JSON changesets of a sorcery object.
Tests are also present to confirm all of the above functionality.
Review: https://reviewboard.asterisk.org/r/2477/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@387662 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch:
* Cleans up some doxygen
* Prevents leaking the system level Stasis topics and messages
on exit (users of valgrind will be happier)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@387633 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There is a reason the heap comparison functions like qsort(), and other
comparison functions specify <0, >0, and =0 for the return values.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@387209 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Way back when in the dark days of Asterisk 1.8.9, blind transferring a call
in a context that included the 'h' extension would inadvertently execute the
hangup code logic on the transferred channel. This was a "bad thing". The fix
was to properly check for the softhangup flags on the channel and only execute
the 'h' extension logic (and, in later versions, hangup handler logic) if the
channel was well and truly dead (Jim).
Unfortunately, CDRs are fickle. Setting the softhangup flag when we detected
that the channel was leaving the bridge (but not to die) caused some crucial
snippet of CDR code, lying in ambush in the middle of the bridging code, to
not get executed. This had the effect of blowing away one of the CDRs that is
typically created during a blind transfer.
While we live and die by the adage "don't touch CDRs in release branches", this
was our bad. The attached patch restores the CDR behavior, and still manages to
not run the 'h' extension during a blind transfer (at least not when it's
supposed to).
Thanks to Steve Davies for diagnosing this and providing a fix.
Review: https://reviewboard.asterisk.org/r/2476
(closes issue ASTERISK-21394)
Reported by: Ishfaq Malik
Tested by: Ishfaq Malik, mjordan
patches:
fix_missing_blindXfer_cdr2 uploaded by one47 (License 5012)
........
Merged revisions 387036 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 387038 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@387039 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change does the following:
1. Adds the sorcery realtime module
2. Adds unit tests for the sorcery realtime module
3. Changes the realtime core to use an ast_variable list instead of variadic arguments
4. Changes all realtime drivers to accept an ast_variable list
Review: https://reviewboard.asterisk.org/r/2424/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@386731 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a system allows for its usage, Asterisk will use glob to help parse
Asterisk .conf files. The config file loading routine was leaking the memory
allocated by the glob() routine when the config file was in an unmodified
or invalid state.
This patch properly calls globfree in those off nominal paths.
(closes issue ASTERISK-21412)
Reported by: Corey Farrell
patches:
config_glob_leak.patch uploaded by Corey Farrell (license 5909)
........
Merged revisions 386672 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 386677 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@386685 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch cleans up two things features:
* It properly unregisters the CLI commands that features registered
* It cancels and performs a pthread_join on the created parking thread. This
not only properly joins a non-detached thread, but also prevents disposing
of the parking lots prior to the parking thread completely exiting.
(closes issue ASTERISK-21407)
Reported by: Corey Farrell
patches:
features_shutdown-r2.patch uploaded by Corey Farrell (License 5909)
........
Merged revisions 386641 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 386642 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@386676 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The pimp_my_sip branch is being merged at this point because
it offers basic functionality, and from an API standpoint, things
are complete.
SIP work is *not* feature-complete; however, with the completion
of the SUBSCRIBE/NOTIFY API, all APIs (except a PUBLISH API) have
been created, and thus it is possible for developers to attempt
to create new SIP work.
API documentation can be found in the doxygen in the code, but
usability documentation is still lacking.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@386540 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The two party bridging loops were changing the bridge peer pointers
without the channel locks held. Thus when ast_channel_massquerade()
tested and used the pointer there is a small window of opportunity for the
pointers to become NULL even though the masquerade code has the channels
locked.
(closes issue ASTERISK-21356)
Reported by: William luke
Patches:
jira_asterisk_21356_v11.patch (license #5621) patch uploaded by rmudgett
Tested by: William luke
........
Merged revisions 386256 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 386286 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@386289 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The API itself is documented using Swagger, a lightweight mechanism for
documenting RESTful API's using JSON. This allows us to use swagger-ui
to provide executable documentation for the API, generate client
bindings in different languages, and generate a lot of the boilerplate
code for implementing the RESTful bindings. The API docs live in the
rest-api/ directory.
The RESTful bindings are generated from the Swagger API docs using a set
of Mustache templates. The code generator is written in Python, and
uses Pystache. Pystache has no dependencies, and be installed easily
using pip. Code generation code lives in rest-api-templates/.
The generated code reduces a lot of boilerplate when it comes to
handling HTTP requests. It also helps us have greater consistency in the
REST API.
(closes issue ASTERISK-20891)
Review: https://reviewboard.asterisk.org/r/2376/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@386232 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In messages.c, there are several places in the code where we create a
tmp_tech_holder and pass that into an ao2_find call. Unfortunately, we
weren't initializing the rwlock on the tmp_tech_holder, which the hash
function was locking. It's apparently harmless, but still not the best
code.
This patch extracts all that copy/pasted code into two functions,
msg_find_by_tech and msg_find_by_tech_name, which properly initialize
and destroy the rwlock on the tmp_tech_holder.
Review: https://reviewboard.asterisk.org/r/2454/
........
Merged revisions 386006 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@386019 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In the move from Asterisk's event system to Stasis, this makes
distributed device state aggregation always-on, removes unnecessary
task processors where possible, and collapses aggregate and
non-aggregate states into a single cache for ease of retrieval. This
also removes an intermediary step in device state aggregation.
Review: https://reviewboard.asterisk.org/r/2389/
(closes issue ASTERISK-21101)
Patch-by: Kinsey Moore <kmoore@digium.com>
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@385860 65c4cc65-6c06-0410-ace0-fbb531ad65f3
After some discussion on asterisk-dev, it was decided that the bulk of
the logic in app_stasis actually belongs in a resource module instead
of the application module.
This patch does that, leaves the app specific stuff in app_stasis, and
fixes up everything else to be consistent with that change.
* Renamed test_app_stasis to test_res_stasis
* Renamed app_stasis.h to stasis_app.h
* This is still stasis application support, even though it's no
longer in an app_ module. The name should never have been tied to
the type of module, anyways.
* Now that json isn't a resource module anymore, moved the
ast_channel_snapshot_to_json function to main/stasis_channels.c,
where it makes more sense.
Review: https://reviewboard.asterisk.org/r/2430/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@385742 65c4cc65-6c06-0410-ace0-fbb531ad65f3
refactored to use these events rather than producing the events directly
in channel.c. Finally, the code was added to app_stasis to produce
DTMF events on the WebSocket.
The AMI events are completely backward compatible, including sending
events on transmitted DTMF, and sending DTMF start events.
The Stasis-HTTP events are somewhat simplified. Since DTMF start and
DTMF send events are generally less useful, Stasis-HTTP will only send
events on received DTMF end.
(closes issue ASTERISK-21282)
(closes issue ASTERISK-21359)
Review: https://reviewboard.asterisk.org/r/2439
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@385734 65c4cc65-6c06-0410-ace0-fbb531ad65f3
These functions are already used in one branch (jrose's parking branch)
and will soon be used in other branches as well.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@385522 65c4cc65-6c06-0410-ace0-fbb531ad65f3
protected by the features_lock.
* Made all calls to ast_find_call_feature() have the features_lock held.
* Fixed set_config_flags() to actually use find_group() to look for
feature groups in DYNAMIC_FEATURES. The code originally assumed all
feature groups were listed in DYNAMIC_FEATURES.
* Make everyone use ast_rdlock_call_features(),
ast_unlock_call_features(), and new ast_wrlock_call_features() instead of
directly calling the rwlock API on features_lock.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@385277 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For the events that have been ported to Stasis, this was broken in
r384910, when a couple of lines of code was lost in a merge.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@385236 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The settings saved on the channel for FEATURE()/FEATUREMAP() were only
for that channel. This patch adds the ability to have these settings
inherited to child channels if you set FEATURE(inherit)=yes.
Closes issue ASTERISK-21306.
Review: https://reviewboard.asterisk.org/r/2415/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@385088 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
* A new Stasis payload has been defined for multi-channel messages. This
payload can store multiple ast_channel_snapshot objects along with a single
JSON blob. The payload object itself is opaque; the snapshots are stored
in a container keyed by roles. APIs have been provided to query for and
retrieve the snapshots from the payload object.
* The Dial AMI events have been refactored onto Stasis. This includes dial
messages in app_dial, as well as the core dialing framework. The AMI events
have been modified to send out a DialBegin/DialEnd events, as opposed to
the subevent type that was previously used.
* Stasis messages, types, and other objects related to channels have been
placed in their own file, stasis_channels. Unit tests for some of these
objects/messages have also been written.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@384910 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is the API that binds the Stasis dialplan application to external
Stasis applications. It also adds the beginnings of WebSocket
application support.
This module registers a dialplan function named Stasis, which is used
to put a channel into the named Stasis app. As a channel enters and
leaves the Stasis diaplan application, the Stasis app receives a
'stasis-start' and 'stasis-end' events.
Stasis apps register themselves using the stasis_app_register and
stasis_app_unregister functions. Messages are sent to an application
using stasis_app_send.
Finally, Stasis apps control channels through the use of the
stasis_app_control object, and the family of stasis_app_control_*
functions.
Other changes along for the ride are:
* An ast_frame_dtor function that's RAII_VAR safe
* Some common JSON encoders for name/number, timeval, and
context/extension/priority
Review: https://reviewboard.asterisk.org/r/2361/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@384879 65c4cc65-6c06-0410-ace0-fbb531ad65f3
OBJ_PARTIAL_KEY searching a rbtree did not find all possible matches if
the container did not accept duplicates.
Added matching node bias to indicate which matching node is being searched
for: first, last, any.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@384616 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes a bug introduced in r76703, wherein Asterisk could only parse
arguments in the so-called 'recommended' way, e.g., NoOp(foo,bar). The proper
syntax of NoOp,foo|bar is now parsed correctly.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@384452 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes an issue of message ordering that occurs when
multiple topics are forwarded to an aggregator topic (such as
ast_channel_topic_all()).
It is (very reasonably) expected that the rules governing message
dispatch order still apply, so long as the messages start from the
same thread, and are received by the same subscription. Because the
existing code had an additional layer of dispatching via the Stasis
thread pool for forwards, those promises couldn't be kept.
Forwarding subscriptions no longer have their own mailbox, and now
dispatch directly from the forwarding topic's stasis_publish()
call. This means that the topic's lock is held for the duration of not
only a message's dispatch, but the dispatch of all the forwards. This
shouldn't be a problem right now, but if an aggregator topic had many
subscribers, it could become a problem. But I figure we can write more
clever code when the time comes, if necessary.
Review: https://reviewboard.asterisk.org/r/2419/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@384413 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch migrates the TestEvent AMI events to first be dispatched over the
Stasis-Core message bus. This helps to preserve the ordering of the events
with other events in the AMI system, such as the various channel related
events.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@384389 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Updated test_uuid.c to test the new API call.
* Made system use the new API call to eliminate "10's of lines" where
used.
* Fixed untested ast_strdup() return in stasis_subscribe() by eliminating
the need for it. struct stasis_subscription now contains the uniqueid[]
string.
* Fixed some issues in exchangecal_write_event():
Create uid with enough space for a UUID string to avoid a realloc.
Fix off by one error if the calendar event provided a UUID string.
There is no need to check for NULL before calling ast_free().
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@384302 65c4cc65-6c06-0410-ace0-fbb531ad65f3
While looking at the security vulnerability in ASTERISK-20967, Walter noticed
a file descriptor leak and some other issues in off nominal code paths. This
patch corrects them.
Note that this patch is not related to the vulnerability in ASTERISK-20967,
but the patch was placed on that issue.
(closes issue ASTERISK-20967)
Reported by: wdoekes
patches:
issueA20967_file_leak_and_unused_wkspace.patch uploaded by wdoekes (License 5674)
........
Merged revisions 384118 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 384119 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@384120 65c4cc65-6c06-0410-ace0-fbb531ad65f3
AST-2012-014, fixed in January of this year, contained a fix for Asterisk's
HTTP server for a remotely-triggered crash. While the fix put in place fixed
the possibility for the crash to be triggered, a denial of service vector still
exists with that solution if an attacker sends one or more HTTP POST requests
with very large Content-Length values. This patch resolves this by capping
the Content-Length at 1024 bytes. Any attempt to send an HTTP POST with
Content-Length greater than this cap will not result in any memory allocation.
The POST will be responded to with an HTTP 413 "Request Entity Too Large"
response.
This issue was reported by Christoph Hebeisen of TELUS Security Labs
(closes issue ASTERISK-20967)
Reported by: Christoph Hebeisen
patches:
AST-2013-002-1.8.diff uploaded by mmichelson (License 5049)
AST-2013-002-10.diff uploaded by mmichelson (License 5049)
AST-2013-002-11.diff uploaded by mmichelson (License 5049)
........
Merged revisions 383978 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383980 65c4cc65-6c06-0410-ace0-fbb531ad65f3
r375757 attempted to resolve a race condition between multiple submissions of
CDRs while in batch mode from attempting to destroy the scheduled batch
submission by extending the batch CDR lock. Unfortunately, this causes a
deadlock between the pending CDR lock and the batch CDR lock. This patch
resolves the intent of r375757 by simply providing a new lock that protects
the scheduling of the batches. The original batch CDR lock is kept to protect
manipulation of the batch CDR settings, but has been placed such that it
is not held when the pending lock is held.
Thanks to Chase Venters for providing lock analysis on the issue.
(issue ASTERISK-21162)
Reported by: Chase Venters
........
Merged revisions 383839 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 383840 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383841 65c4cc65-6c06-0410-ace0-fbb531ad65f3
HangupRequest and SoftHangupRequest are now ast_channel_blob Stasis
messages, with the cause code as an optional field in the blob.
NewCallerid now simply watches for changes in the callerid information
in channel snapshots, and creates the AMI event appropriately.
Since the original NewCallerid event honored the channelvars setting
in manager.conf, the channel variables configured there had to become
a part of the channel snapshot. These are now a part of every snapshot
based event, making the configuration description "every time a
channel-oriented event is emitted" less of a lie.
There a a few other changes wrapped up in here as well.
* When ast_channel_topic() is given NULL for a channel, it returns
the ast_channel_topic_all() topic instead of NULL. This can clean
up a lot of NULL checking we're doing currently.
* The fields Cause and Cause-txt were removed from the base channel
information and put only on the Hangup events, since those fields
are meaningless outside of a Hangup event.
* Removed the pipe-delimiter processing of the channelvars field,
since that's been deprecated forever.
(closes issue ASTERISK-21096)
Review: https://reviewboard.asterisk.org/r/2405/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383726 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Core modules don't honor <depend> flags in MODULEINFO, which broke jansson
if specified --with-jansson to configure.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383633 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When I moved res_json.c to json.c, I left the MODULE_INFO stuff in there,
which was interesting if you ran module show. I also forgot to call what
was in module_load() from asterisk main().
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383611 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch started out simply as fixing the bouncing tests introduced
in r382685, but required some other changes to give it a decent
implementation.
To fix the bouncing tests, the UserEvent and Newexten AMI events
needed to be refactored to dispatch via Stasis. Dispatching directly
to AMI resulted in those events sometimes getting ahead of the
associated Newchannel events, which would understandably confuse anyone.
I found that instead of creating a zillion different message types and
structures associated with them, it would be preferable to define a
message type that has a channel snapshot and a blob of structured data
with a small bit of additional information. The JSON object model
provides a very nice way of representing structured data, so I went
with that.
* Move JSON support from res_json.c to main/json.c
* Made libjansson-dev a required dependency
* Added an ast_channel_blob message type, which has a channel
snapshot and JSON blob of data.
* Changed UserEvent and Newexten events so that they are dispatched
via ast_channel_blob messages on the channel's topic.
* Got rid of the ast_channel_varset message; used ast_channel_blob
instead.
* Extracted the manager functions converting Stasis channel events to
AMI events into manager_channel.c.
(issue ASTERISK-21096)
Review: https://reviewboard.asterisk.org/r/2381/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383579 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Because of the way that topics were handled when publishing, it was
possible to dispatch a message to a subscription after that
subscription had been unsubscribed such that the dispatched message
arrived at the callback after the callback had received its final
message. In callbacks that cleaned up user data, this would often cause
a segfault. This has been resolved by locking the topic during the
entirety of dispatch. To prevent long publishing and topic locking
times, forwarding subscriptions have been made to be standard
subscriptions instead of mailboxless subscriptions which were
dispatched at publishing time.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383422 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When using scoped locks, the unref of an AO2 object should happen after
the unlock occurs which requires usage of scoped refs.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383377 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Remove MWI's dependency on the event system by moving it to
Stasis-core. This also introduces forwarding topic pools in Stasis-core
which aggregate many dynamically allocated topics into a single primary
topic.
Review: https://reviewboard.asterisk.org/r/2368/
(closes issue ASTERISK-21097)
Patch-by: Kinsey Moore
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383284 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Often times, when subscribing to a topic, one wants to handle
different message types differently. While one could cascade if/else
statements through the subscription handler, it is much cleaner to
specify a different callback for each message type. The
stasis_message_router is here to help!
A stasis_message_router is constructed for a particular stasis_topic,
which is subscribes to. Call stasis_message_router_unsubscribe() to
cancel that subscription.
Once constructed, routes can be added using
stasis_message_router_add() (or stasis_message_router_set_default()
for any messages not handled by other routes). There may be only one
route per stasis_message_type. The route's callback is invoked just as
if it were a callback for a subscription; but it only gets called for
messages of the specified type.
(issue ASTERISK-20887)
Review: https://reviewboard.asterisk.org/r/2390/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383242 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Unsubscribing things in Asterisk seems to very commonly follow with
NULLing out the variable that was unsubscribed. This change makes that
a bit simpler.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383168 65c4cc65-6c06-0410-ace0-fbb531ad65f3
AMI, HTTP, and chan_sip all support TLS in some way, but none of them
support all the options that Asterisk's TLS core is capable of
interpreting. This prevents consumers of the TLS/SSL layer from setting
TLS/SSL options that they do not support.
This also gets tlsverifyclient closer to a working state by requesting
the client certificate when tlsverifyclient is set. Currently, there is
no consumer of main/tcptls.c in Asterisk that supports this feature and
so it can not be properly tested.
Review: https://reviewboard.asterisk.org/r/2370/
Reported-by: John Bigelow
Patch-by: Kinsey Moore
(closes issue AST-1093)
........
Merged revisions 383165 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 383166 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@383167 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The cache dump mechanism allows the developer to retreive multiple
items of a given type (or of all types) from the cache residing in a
stasis caching topic in addition to the existing single-item cache
retreival mechanism. This also adds to the caching unit tests to
ensure that the new cache dump mechanism is functioning properly.
Review: https://reviewboard.asterisk.org/r/2367/
(issue ASTERISK-21097)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382705 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For the initial use of this bus, I took some work kmoore did creating
channel snapshots. So rather than create AMI events directly in the
channel code, this patch generates Stasis events, which manager.c uses
to then publish the AMI event.
This message bus provides a generic publish/subscribe mechanism within
Asterisk. This message bus is:
- Loosely coupled; new message types can be added in seperate modules.
- Easy to use; publishing and subscribing are straightforward
operations.
In addition to basic publish/subscribe, the patch also provides
mechanisms for message forwarding, and for message caching.
(issue ASTERISK-20887)
(closes issue ASTERISK-20959)
Review: https://reviewboard.asterisk.org/r/2339/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382685 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Often, Asterisk may realize that a change in the source of an RTP stream is
about to occur and ask that the RTP engine reset it's lock on the current RTP
source. In certain scenarios, it may take awhile for the new remote system to
send RTP packets, while the old remote system may continue providing RTP during
that time period. This causes Asterisk to re-lock onto the old source, thereby
rejecting the new source when the old source stops sending RTP and the new
source begins.
This patch prevents that by having a constant secondary, 'secret' probation
mode enabled when an RTP source has been chosen. RTP packets from other sources
are always considered, but never chosen unless the current RTP source stops
sending RTP.
Review: https://reviewboard.asterisk.org/r/2364
(closes issue AST-1124)
Reported by: John Bigelow
Tested by: John Bigelow
(closes issue AST-1125)
Reported by: John Bigelow
Tested by: John Bigelow
........
Merged revisions 382573 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@382589 65c4cc65-6c06-0410-ace0-fbb531ad65f3
