Fixes a crash due to a lack of proper reference on the nativeformats
object before passing it into ast_request(). Also found potentially
similar use case bugs in app_chanisavail.c, bridge.c, and bridge_basic.c
Fixes: #388
(cherry picked from commit 275f7911b5)
Adds additional control options over the transfer
feature functionality to give users more control
in how the transfer feature sounds and works.
First, the "transfer" sound that plays when a transfer is
initiated can now be customized by the user in
features.conf, just as with the other transfer sounds.
Secondly, the user can now specify the transfer extension
in advance by using the TRANSFER_EXTEN variable. If
a valid extension is contained in this variable, the call
will automatically be transferred to this destination.
Otherwise, it will fall back to collecting the extension
from the user as is always done now.
ASTERISK-29899 #close
Change-Id: Ibff309caa459a2b958706f2ed0ca393b1ef502e3
The attended transfer feature will emit a warning if the user
cancels the transfer or the attended transfer doesn't complete
for any reason. Changes the warning to a verbose message,
since nothing is actually wrong here.
ASTERISK-29612 #close
Change-Id: I64c93cdb21360a0a8d45e9cb6db3af8168f66e6d
Fixed a bug (like a typo) in retransfer_enter() at main/bridge_basic.c:2641.
common_recall_channel_setup() setups common things on the recalled transfer
target, but used same target as source instead trasfered.
ASTERISK-29161 #close
Change-Id: Ieb549654a621c38b1ad5e9d15b9f18823d9cc31f
* Added start DTMF transfer verbose messages.
* Made associated transfer messages use a similar message format.
* Adjusted message verbose level as requested by initial reporter.
ASTERISK-27449
Change-Id: I2045714586414b3c5ef1f3cc56c1c4af4b31f551
* Add the channel name to diagnostic messages so you will know which
channel failed to transfer.
* Promoted some debug messages to verbose 4 messages.
ASTERISK-27449 #close
Change-Id: Idac66b7628c99379cc9269158377fd87dc97a880
This is a fun one.
Given the following attended transfer scenario:
1. Transfer target is called
2. Transferer hangs up
3. Transfer target call attempt reaches timeout
4. Transfer target is told to hang up
5. Transfer target answers before channel is hung up
6. Transferer recall target is called
A crash would occur. This is because the transfer target call
attempt, despite being told to hang up, would raise a recall
target answer before the recall target had been answered. As it
had not answered there would be no recall target channel and it
would implode.
This change makes it so that if the transfer target has been
hung up we don't tell the attended transfer code that it has
answered. We also clear out the stimulus that the recall target
has been answered after telling the transfer target to hang up,
in case it was able to raise the information before we told it
to hangup.
ASTERISK-27361
Change-Id: Ifb8b255a9c4d2c5c1b8ad77bf54f659ed286df99
ASTERISK_REGISTER_FILE no longer has any purpose so this commit removes
all traces of it.
Previously exported symbols removed:
* __ast_register_file
* __ast_unregister_file
* ast_complete_source_filename
This also removes the mtx_prof static variable that was declared when
MTX_PROFILE was enabled. This variable was only used in lock.c so it
is now initialized in that file only.
ASTERISK-26480 #close
Change-Id: I1074af07d71f9e159c48ef36631aa432c86f9966
The xferfailsound was read from the channel at the beginning of the transfer,
and that value is "cached" for the duration of the transfer. Therefore, changing
the xferfailsound on the channel using the FEATURE() dialplan function does
nothing once the transfer is under way.
This makes it so the transfer code instead gets the xferfailsound configuration
options from the channel when it is actually going to be used.
This patch also fixes a potential memory leak of the props object as well as
making sure the condition variable gets initialized before being destroyed.
ASTERISK-25696 #close
Change-Id: Ic726b0f54ef588bd9c9c67f4b0e4d787934f85e4
If the attended transfer destination answers (picks call up or goes to
voicemail) and then hangs up on the transferer then transferer hears the
fail sound.
This patch makes it so the fail sound is not played when the transfer
destination/target hangs up after answering.
ASTERISK-25697 #close
Change-Id: I97f142fe4fc2805d1a24b7c16143069dc03d9ded
Use of GOTO_ON_BLINDXFR would not work at all. The target location would
never be executed by the transferring channel.
* Made feature_blind_transfer() call ast_bridge_set_after_go_on() with
valid context, exten, and priority parameters from the transferring
channel.
* Renamed some feature_blind_transfer() local variables for clarity.
ASTERISK-25641 #close
Reported by Dmitry Melekhov
Change-Id: I19bead9ffdc4aee8d58c654ca05a198da1e4b7ac
A crash happens with this sequence of steps:
1) Party A is connected to party B.
2) Party B starts a DTMF attended transfer.
3) Party A hangs up while party B is dialing party C.
When party A hangs up the bridge that party A and party B are in is
dissolved and party B is kicked out of the bridge. When party B finishes
dialing party C he attempts to move to the new bridge with party C. Since
party B is no longer in a bridge the attempted move dereferences a NULL
bridge_channel pointer and crashes.
* Made the hold(), unhold(), ringing(), and the bridge_move() functions
tolerant of the channel not being in a bridge. The assertion that party B
is always in a bridge is not true if the bridged peer of party B hangs up
and dissolves the bridge. Being tolerant of not being in a bridge allows
the peer hangup stimulus to be processed by the FSM.
* Made the bridge_move() function return void since where the return value
for a failed move was checked generated a FSM coding ERROR message for a
normal off-nominal condition.
* Eliminated most uses of RAII_VAR in bridge_basic.c.
ASTERISK-25003 #close
Reported by: Artem Volodin
Change-Id: Ie2c1b14e5e647d4ea6de300bf56d69805d7bcada
Git does not support the ability to replace a token with a version
string during check-in. While it does have support for replacing a
token on clone, this is somewhat sub-optimal: the token is replaced
with the object hash, which is not particularly easy for human
consumption. What's more, in practice, the source file version was often
not terribly useful. Generally, when triaging bugs, the overall version
of Asterisk is far more useful than an individual SVN version of a file. As a
result, this patch removes Asterisk's support for showing source file
versions.
Specifically, it does the following:
* Rename ASTERISK_FILE_VERSION macro to ASTERISK_REGISTER_FILE, and
remove passing the version in with the macro. Other facilities
than 'core show file version' make use of the file names, such as
setting a debug level only on a specific file. As such, the act of
registering source files with the Asterisk core still has use. The
macro rename now reflects the new macro purpose.
* main/asterisk:
- Refactor the file_version structure to reflect that it no longer
tracks a version field.
- Remove the "core show file version" CLI command. Without the file
version, it is no longer useful.
- Remove the ast_file_version_find function. The file version is no
longer tracked.
- Rename ast_register_file_version/ast_unregister_file_version to
ast_register_file/ast_unregister_file, respectively.
* main/manager: Remove value from the Version key of the ModuleCheck
Action. The actual key itself has not been removed, as doing so would
absolutely constitute a backwards incompatible change. However, since
the file version is no longer tracked, there is no need to attempt to
include it in the Version key.
* UPGRADE: Add notes for:
- Modification to the ModuleCheck AMI Action
- Removal of the "core show file version" CLI command
Change-Id: I6cf0ff280e1668bf4957dc21f32a5ff43444a40e
Switch logger callid's from AO2 objects to simple integers.
This helps in two ways. Copying integers is faster than
referencing AO2 objects, so this will result in a small
reduction in logger overhead. This also erases the possibility
of an infinate loop caused by an invalid callid in
threadstorage.
ASTERISK-24833 #comment Committed callid conversion to trunk.
Reported by: Corey Farrell
Review: https://reviewboard.asterisk.org/r/4466/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432834 65c4cc65-6c06-0410-ace0-fbb531ad65f3
After the initial DTMF atxfer call attempt to the transfer target fails to
answer during a blonde transfer, the recall callback channels do not get
setup with information from the initial transferrer channel. As a result,
the recall callback to the transferrer does not have callid, channel
variables, datastores, accountcode, peeraccount, COLP, and CLID setup. A
similar situation happens with the recall callback to the transfer target
but it is less visible. The recall callback to the transfer target does
not have callid, channel variables, datastores, accountcode, peeraccount,
and COLP setup.
* Added missing information to the recall callback channels before
initiating the call. callid, channel variables, datastores, accountcode,
peeraccount, COLP, and CLID
* Set callid of the transferrer channel on the DTMF atxfer controller
thread attended_transfer_monitor_thread().
* Added missing channel unlocks and props unref to off nominal paths in
attended_transfer_properties_alloc().
ASTERISK-23841 #close
Reported by: Richard Mudgett
Review: https://reviewboard.asterisk.org/r/4259/
........
Merged revisions 430034 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@430041 65c4cc65-6c06-0410-ace0-fbb531ad65f3
After a blond transfer (start attended and hang up)
to a destination that also hangs up without answer,
the Local;1 channel was leaked and would show up on
core show channels. This was happening because the
attended state blond_nonfinal_enter() resetting the
props->transfer_target to null while releasing it's
own reference, which would later prevent props from
releasing another reference during destruction. The
change made here is simply to not assign the target
to NULL.
ASTERISK-24513 #close
Reported by: Mark Michelson
Review: https://reviewboard.asterisk.org/r/4262/
........
Merged revisions 429826 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 429827 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@429828 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In r428165, two bugs were introduced:
* Prior to entering the features retry loop, the buffer that holds the
collected digits is wiped. However, this inadvertently wipes out the
first collected digit on the first pass through, which is obtained
in ast_stream_and_wait. This caused all of the features tests to fail.
* If ast_app_dtget returns a hangup (-1), the loop would retry incorrectly.
If we detect a hangup, we have to stop trying the feature.
This patch fixes both issues.
Review: https://reviewboard.asterisk.org/r/4196/
........
Merged revisions 428505 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428506 65c4cc65-6c06-0410-ace0-fbb531ad65f3
From reviewboard:
"During blind transfer testing, it was noticed that tests were failing
occasionally because the ARI blind transfer event was not being sent.
After investigating, I detected a race condition in the blind transfer
code. When blind transferring a single channel, the actual transfer
operation (i.e. removing the transferee from the bridge and directing
them to the proper dialplan location) is queued onto the transferee
bridge channel. After queuing the transfer operation, the blind transfer
Stasis message is published. At the time of publication, snapshots of
the channels and bridge involved are created. The ARI subscriber to the
blind transfer Stasis message then attempts to determine if the bridge
or any of the involved channels are subscribed to by ARI applications.
If so, then the blind transfer message is sent to the applications. The
way that the ARI blind transfer message handler works is to first see
if the transferer channel is subscribed to. If not, then iterate over
all the channel IDs in the bridge snapshot and determine if any of
those are subscribed to. In the test we were running, the lone
transferee channel was subscribed to, so an ARI event should have been
sent to our application. Occasionally, though, the bridge snapshot did
not have any channels IDs on it at all. Why?
The problem is that since the blind transfer operation is handled by a
separate thread, it is possible that the transfer will have completed and
the channels removed from the bridge before we publish the blind transfer
Stasis message. Since the blind transfer has completed, the bridge on
which the transfer occurred no longer has any channels on it, so the
resulting bridge snapshot has no channels on it. Through investigation of
the code, I found that attended transfers can have this issue too for the
case where a transferee is transferred to an application."
The fix employed here is to decouple the creation of snapshots for the transfer
messages from the publication of the transfer messages. This way, snapshots
can be created to reflect what they are at the time of the transfer operation.
Review: https://reviewboard.asterisk.org/r/4135
........
Merged revisions 427848 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 427870 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427873 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The previous behavior was to simply set the accountcode of an outgoing
channel to the accountcode of the channel initiating the call. It was
done this way a long time ago to allow the accountcode set on the SIP/100
channel to be propagated to a local channel so the dialplan execution on
the Local;2 channel would have the SIP/100 accountcode available.
SIP/100 -> Local;1/Local;2 -> SIP/200
Propagating the SIP/100 accountcode to the local channels is very useful.
Without any dialplan manipulation, all channels in this call would have
the same accountcode.
Using dialplan, you can set a different accountcode on the SIP/200 channel
either by setting the accountcode on the Local;2 channel or by the Dial
application's b(pre-dial), M(macro) or U(gosub) options, or by the
FollowMe application's b(pre-dial) option, or by the Queue application's
macro or gosub options. Before Asterisk v12, the altered accountcode on
SIP/200 will remain until the local channels optimize out and the
accountcode would change to the SIP/100 accountcode.
Asterisk v1.8 attempted to add peeraccount support but ultimately had to
punt on the support. The peeraccount support was rendered useless because
of how the CDR code needed to unconditionally force the caller's
accountcode onto the peer channel's accountcode. The CEL events were thus
intentionally made to always use the channel's accountcode as the
peeraccount value.
With the arrival of Asterisk v12, the situation has improved somewhat so
peeraccount support can be made to work. Using the indicated example, the
the accountcode values become as follows when the peeraccount is set on
SIP/100 before calling SIP/200:
SIP/100 ---> Local;1 ---- Local;2 ---> SIP/200
acct: 100 \/ acct: 200 \/ acct: 100 \/ acct: 200
peer: 200 /\ peer: 100 /\ peer: 200 /\ peer: 100
If a channel already has an accountcode it can only change by the
following explicit user actions:
1) A channel originate method that can specify an accountcode to use.
2) The calling channel propagating its non-empty peeraccount or its
non-empty accountcode if the peeraccount was empty to the outgoing
channel's accountcode before initiating the dial. e.g., Dial and
FollowMe. The exception to this propagation method is Queue. Queue will
only propagate peeraccounts this way only if the outgoing channel does not
have an accountcode.
3) Dialplan using CHANNEL(accountcode).
4) Dialplan using CHANNEL(peeraccount) on the other end of a local
channel pair.
If a channel does not have an accountcode it can get one from the
following places:
1) The channel driver's configuration at channel creation.
2) Explicit user action as already indicated.
3) Entering a basic or stasis-mixing bridge from a peer channel's
peeraccount value.
You can specify the accountcode for an outgoing channel by setting the
CHANNEL(peeraccount) before using the Dial, FollowMe, and Queue
applications. Queue adds the wrinkle that it will not overwrite an
existing accountcode on the outgoing channel with the calling channels
values.
Accountcode and peeraccount values propagate to an outgoing channel before
dialing. Accountcodes also propagate when channels enter or leave a basic
or stasis-mixing bridge. The peeraccount value only makes sense for
mixing bridges with two channels; it is meaningless otherwise.
* Made peeraccount functional by changing accountcode propagation as
described above.
* Fixed CEL extracting the wrong ie value for the peeraccount. This was
done intentionally in Asterisk v1.8 when that version had to punt on
peeraccount.
* Fixed a few places dealing with accountcodes that were reading from
channels without the lock held.
AFS-65 #close
Review: https://reviewboard.asterisk.org/r/3601/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419520 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Whenever possible, audiohooks and framehooks will now be copied over
to the channel that the masquerading channel gets cloned into. This
should occur for all audiohooks and most framehooks. As a result,
in Asterisk 12.5 and up, the AUDIOHOOK_INHERIT function is now
deprecated and its behavior is essentially the new default for all
audiohooks, plus some additional audiohooks/framehooks.
Review: https://reviewboard.asterisk.org/r/3721/
........
Merged revisions 418914 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418936 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Create a Stasis bridge sub-class to propagate linkedids and
accountcodes.
* Fixed the basic bridge sub-class to update peeraccount codes when the
number of channels in the bridge drops back down to two parties.
* Refactored ast_bridge_channel_update_accountcodes() to handle channels
joining/leaving the bridge.
* Fixed the basic bridge sub-class to not call the base bridge class pull
method twice.
AFS-105 #close
ASTERISK-23852 #close
Reported by: Richard Mudgett
Review: https://reviewboard.asterisk.org/r/3720/
........
Merged revisions 418225 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418226 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In the past framehooks have had no capability to determine what frame types a hook
is actually interested in consuming. This has meant that code has had to assume they
want all frames, thus preventing native bridging.
This change adds a callback which allows a framehook to be queried for whether it
is consuming a frame of a specific type. The native RTP bridging module has also
been updated to take advantange of this, allowing native bridging to occur when
previously it would not.
ASTERISK-23497 #comment Reported by: Etienne Lessard
ASTERISK-23497 #close
Review: https://reviewboard.asterisk.org/r/3522/
........
Merged revisions 413681 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@413682 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In the past framehooks have had no capability to determine what frame types a hook
is actually interested in consuming. This has meant that code has had to assume they
want all frames, thus preventing native bridging.
This change adds a callback which allows a framehook to be queried for whether it
is consuming a frame of a specific type. The native RTP bridging module has also
been updated to take advantange of this, allowing native bridging to occur when
previously it would not.
ASTERISK-23497 #comment Reported by: Etienne Lessard
ASTERISK-23497 #close
Review: https://reviewboard.asterisk.org/r/3522/
........
Merged revisions 413650 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@413651 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When bridge locking was added for bridge snapshot creation, some
locations where bridge locking was added were not guaranteed to
actually have a bridge and locking NULL AO2 objects tends to cause
segfaults. This ensures that NULL bridges aren't locked.
........
Merged revisions 413073 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@413074 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Much needed was a way to assign id to objects on creation, and
much change was necessary to accomplish it. Channel uniqueids
and linkedids are split into separate string and creation time
components without breaking linkedid propgation. This allowed
the uniqueid to be specified by the user interface - and those
values are now carried through to channel creation, adding the
assignedids value to every function in the chain including the
channel drivers. For local channels, the second channel can be
specified or left to default to a ;2 suffix of first. In ARI,
bridge, playback, and snoop objects can also be created with a
specified uniqueid.
Along the way, the args order to allocating channels was fixed
in chan_mgcp and chan_gtalk, and linkedid is no longer lost as
masquerade occurs.
(closes issue ASTERISK-23120)
Review: https://reviewboard.asterisk.org/r/3191/
........
Merged revisions 410157 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410158 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Bridges have two new optional properties, a creator and a name.
Certain consumers of bridges will automatically provide bridges that
they create with these properties. Examples include app_bridgewait,
res_parking, app_confbridge, and app_agent_pool. In addition, a name
may now be provided as an argument to the POST function for creating
new bridges via ARI.
(closes issue AFS-47)
Review: https://reviewboard.asterisk.org/r/3070/
........
Merged revisions 404042 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404043 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There were still a few cases in which ATTENDEDTRANSFER and BLINDTRANSFER
wouldn't be set on channels involved with blind and attended transfers.
This would happen with features that were initialized by channel driver
specific mechanisms in multiparty calls. This patch resolves those cases
while attempted to keep the behavior for setting those variables as
consistent as possible.
(closes issue AFS-24)
Review: https://reviewboard.asterisk.org/r/3040/
........
Merged revisions 403781 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403783 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Channel snapshots have string representations of the channel's native formats.
Prior to this change, the format strings were re-created on ever channel snapshot
creation. Since channel native formats rarely change, this was very wasteful.
Now, string representations of formats may optionally be stored on the ast_format_cap
for cases where string representations may be requested frequently. When formats
are altered, the string cache is marked as invalid. When strings are requested, the
cache validity is checked. If the cache is valid, then the cached strings are copied.
If the cache is invalid, then the string cache is rebuilt and copied, and the cache
is marked as being valid again.
Review: https://reviewboard.asterisk.org/r/2879
........
Merged revisions 400356 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400363 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The Dial, Queue, and FollowMe applications need to inhibit the bridging
initial connected line exchange in order to support the 'I' option.
* Replaced the pass_reference flag on ast_bridge_join() with a flags
parameter to pass other flags defined by enum ast_bridge_join_flags.
* Replaced the independent flag on ast_bridge_impart() with a flags
parameter to pass other flags defined by enum ast_bridge_impart_flags.
* Since the Dial, Queue, and FollowMe applications are now the only
callers of ast_bridge_call() and ast_bridge_call_with_flags(), changed the
calling contract to require the initial COLP exchange to already have been
done by the caller.
* Made all callers of ast_bridge_impart() check the return value. It is
important. As a precaution, I also made the compiler complain now if it
is not checked.
* Did some cleanup in parking_tests.c as a result of checking the
ast_bridge_impart() return value.
An independent, but associated change is:
* Reduce stack usage in ast_indicate_data() and add a dropping redundant
connected line verbose message.
(closes issue ASTERISK-22072)
Reported by: Joshua Colp
Review: https://reviewboard.asterisk.org/r/2845/
........
Merged revisions 399136 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399138 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The cause code needs to be passed from the disconnecting channel to the
bridge peers if the disconnecting channel dissolves the bridge.
* Made the call to an app_agent_pool agent disconnect with the busy cause
code if the agent does not ack the call in time or hangs up before acking
the call.
(closes issue ASTERISK-22042)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2772/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397472 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This essentially makes app_queue usable again. From reviewboard:
* Reporting of transfers and call completion is done by creating stasis
subscriptions and listening for specific events in order to determine
when the call is finished (either via a transfer or hangup).
* Dial end messages have been added where they were previously missing.
* Queue stats are properly being updated again once calls have finished.
* AgentComplete stasis messages and AMI events are now occurring again.
* Mixmonitor starting has been factored into its own function and uses the
Mixmonitor API now instead of using ast_pbx_run()
In addition to the changes in app_queue, there are several supplementary changes as well:
* Queue logging now differentiates between attended and blind transfers. A
note about this is in the CHANGES file.
* Local channel optimization events now report more information. This
includes which of the two local channels involved is the destination of
the optimization, the channel that is replacing the destination local channel,
and an identifier so that begin and end events can be matched to each other.
The end events are now sent whether the optimization was successful or not and
includes an indicator of whether the optimization was successful.
* Changes were made to features and bridging_basic so that additional flags may
be set on a bridge. This is necessary because the queue requires that its
bridge only allows move-swap local channel optimizations into the bridge.
(closes issue ASTERISK-21517)
Reported by Matt Jordan
(closes issue ASTERISK-21943)
Reported by Matt Jordan
Review: https://reviewboard.asterisk.org/r/2694
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397451 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Dial and Queue would previously apply a new set of features whenever
bridging. These options would be based purely on the options supplied
to the dial/queue applications. This patch changes the function those
applications use to bridge calls so that the features will be added
to the set of existing features for each channel rather than having
them override the existing features.
(closes issue ASTERISK-22209)
Reported by: Jonathan Rose
Review: https://reviewboard.asterisk.org/r/2713/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396245 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Most hook callbacks did not need the bridge parameter. The pointer value
could become invalid if the channel is moved to another bridge while it is
executing.
* Fixed some issues in feature_attended_transfer() as a result.
* Reduce the bridge inhibit count in
attended_transfer_properties_shutdown() after it has restored the bridge
channel hooks.
* Removed basic bridge requirement on feature_blind_transfer(). It does
not require the basic bridge like feature_attended_transfer().
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395574 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch renames the bridging* files to bridge*. This may seem pedantic
and silly, but it fits better in line with current Asterisk naming conventions:
* channel is not "channeling"
* monitor is not "monitoring"
etc.
A bridge is an object. It is a first class citizen in Asterisk. "Bridging" is
the act of using a bridge on a set of channels - and the API that fulfills that
role is more than just the action.
(closes issue ASTERISK-22130)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395378 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Matthew Fredrickson
Sean Bright
Naveen Albert
Alexander Traud
Josh Soref
Boris P. Korzun
Sean Bright
Richard Mudgett
Niklas Larsson
Joshua Colp
Corey Farrell
Kevin Harwell
Matt Jordan
Scott Griepentrog
Mark Michelson
Kinsey Moore
Jonathan Rose