Some endpoints do not like a stream being reused for a new
media stream. The frame/jitterbuffer can rely on underlying
attributes of the media stream in order to order the packets.
When a new stream takes its place without any notice the
buffer can get confused and the media ends up getting dropped.
This change uses the SSRC change to determine that a new source
is reusing an existing stream and then bridge_softmix renegotiates
each participant such that they see a new media stream. This
causes the frame/jitterbuffer to start fresh and work as expected.
ASTERISK-27277
Change-Id: I30ccbdba16ca073d7f31e0e59ab778c153afae07
When two channels were early bridged in a native_rtp bridge, the RTP description
on one side was not updated when the other side answered.
This patch forbids non-answered channels to enter a native_rtp bridge, and
triggers a bridge reconfiguration when an ANSWER frame is received.
ASTERISK-27257
Change-Id: If1aaee1b4ed9658a1aa91ab715ee0a6413b878df
* Fix framehook to test frame type for control frame.
* Made framehook exit early if frame type is not a control frame.
* Eliminated RAII_VAR in framehook.
* Use switch instead of else-if ladder for control frame handling.
Change-Id: Ia555fc3600bd85470e3c0141147dbe3ad07c1d18
* Fix deadlock in
bridge_softmix.c:softmix_bridge_stream_topology_changed() between
bridge_channel and channel locks.
* The new bridge technology topology change callbacks must be called with
the bridge locked. The callback references the bridge channel list, the
bridge technology could change, and the bridge stream mapping is updated.
ASTERISK-27212
Change-Id: Ide4360ab853607e738ad471721af3f561ddd83be
This change fixes a few locking issues and some video misrouting.
1. When accessing the stream topology of a channel the channel lock
must be held to guarantee the topology remains valid.
2. When a channel was joined to a bridge the bridge specific
implementation for stream mapping was not invoked, causing video
to be misrouted for a brief period of time.
ASTERISK-27182
Change-Id: I5d2f779248b84d41c5bb3896bf22ba324b336b03
This change does a few things to improve packet loss and renegotiation:
1. On outgoing RTP streams we will now properly reflect out of order
packets and packet loss in the sequence number. This allows the
remote jitterbuffer to better reorder things.
2. Video updates can now be discarded for a period of time
after one has been sent to prevent flooding of clients.
3. For declined and removed streams we will now release any
media session resources associated with them. This was not
previously done and caused an issue where old state was being
used for a new stream.
4. RTP bundling was not actually removing bundled RTP instances
from the parent. This has been resolved by removing based on
the RTP instance itself and not the SSRC.
5. The code did not properly handle explicitly unbundling an
RTP instance from its parent. This now works as expected.
ASTERISK-27143
Change-Id: Ibd91362f0e4990b6129638e712bc8adf0899fd45
When a participant leaves a bridge while operating in SFU mode
their respective stream on every other participant needs to be
removed. Leaving the stream out of the new topology results in
every stream after it being moved and reordered. This causes
problems with clients. Instead simply mark the stream as removed
which leaves it in place in the SDP and doesn't reorder or touch
any other streams.
ASTERISK-27136
Change-Id: I4b3f840adcdf69b83842b0d8a737665ba0ef9cb1
Streams are never truly removed in SDP, they still occupy
a location within the SDP. This location can be reused by
another stream if it so chooses.
This change takes advantage of this such that if a new stream
is needing to be added for a new participant any removed streams
are instead replaced first. This reduces the size of the SDP
and the number of streams.
ASTERISK-27134
Change-Id: I95cdcfd55cf47e02ea52abb5d94008db3fb68b1d
This change fixes a few things uncovered during SFU testing.
1. Unreal channels incorrectly forwarded video frames when
no video stream was present on them. This caused a crash when
they were read as the core requires a stream to exist for the
underlying media type. The Unreal channel will now ensure a
stream exists for the media type before forwarding the frame
and if no stream exists then the frame is dropped.
2. Mapping of frames during bridging from the stream number of
the underlying channel to the stream number of the bridge was
done in the wrong location. This resulted in the frame getting
dropped. This mapping now occurs on reading of the frame from
the channel.
3. Bridging was using the wrong ast_read function resulting in
it living in a non-multistream world.
4. In bridge_softmix when adding new streams to existing channels
the wrong stream topology was copied resulting in no streams
being added.
Change-Id: Ib7445722c3219951d6740802a0feddf2908c18c8
The video stream was using the audio stream RTP instance addresses to
check if the video RTP gets directed to an allowed direct media Access
Control List (ACL) address. There is no guarantee that the video RTP
instance uses the same addresses as the audio RTP instance.
This looks like it has been a bug since v11 when direct media ACL was
first added to chan_sip and then faithfully reproduced through a couple
code refactorings into the new bridging architecture.
Change-Id: I8ddd56320e0eea769f3ceed3fa5b6bdfb51d681a
There have been reports of deadlocks caused by an attempt to send a frame
to a channel's rtp instance after the channel has left the native bridge
and been destroyed. This patch effectively causes the bridge channel to
keep a reference to the glue and both the audio and video rtp instances
so what gets started will get stopped.
ASTERISK-26978 #close
Reported-by: Ross Beer
Change-Id: I9e1ac49fa4af68d64826ccccd152593cf8cdb21a
This change adds a deferred queue to bridging. If a bridge
technology determines that a frame can not be written and
should be deferred it can indicate back to bridging to do so.
Bridging will then requeue any deferred frames upon a new
channel joining the bridge.
This change has been leveraged for T.38 request negotiate
control frames. Without the deferred queue there is a race
condition between the bridge receiving the T.38 request
negotiate and the second channel joining and being in the
bridge. If the channel is not yet in the bridge then the T.38
negotiation fails.
A unit test has also been added that confirms that a T.38
request negotiate control frame is deferred when no other
channel is in the bridge and that it is requeued when a new
channel joins the bridge.
ASTERISK-26923
Change-Id: Ie05b08523f399eae579130f4a5f562a344d2e415
This sets up the "plumbing" in bridge_softmix to
be able to accommodate Asterisk asking as an SFU
(selective forwarding unit) for conferences.
The way this works is that whenever a channel enters or leaves a
conference, all participants in the bridge get sent a stream topology
change request. The topologies consist of the channels' original
topology, along with video destination streams corresponding to each
participants' source video streams. So for instance, if Alice, Bob, and
Carol are in the conference, and each supplies one video stream, then
the topologies for each would look like so:
Alice:
Audio,
Source video(Alice),
Destination Video(Bob),
Destination video (Carol)
Bob:
Audio,
Source video(Bob)
Destination Video(Alice),
Destination video (Carol)
Carol:
Audio,
Source video(Carol)
Destination Video(Alice),
Destination video (Bob)
This way, video that arrives from a source video stream can then be
copied out to the destination video streams on the other participants'
channels.
Once the bridge gets told that a topology on a channel has changed, the
bridge constructs a map in order to get the video frames routed to the
proper destination streams. This is done using the bridge channel's
stream_map.
This change is bare-bones with regards to SFU support. Some key features
are missing at this point:
* Stream limits. This commit makes no effort to limit the number of
streams on a specific channel. This means that if there were 50 video
callers in a conference, bridge_softmix will happily send out topology
change requests to every channel in the bridge, requesting 50+
streams.
* Configuration. The plumbing has been added to bridge_softmix, but
there has been nothing added as of yet to app_confbridge to enable SFU
video mode.
* Testing. Some functions included here have unit tests.
However, the functionality as a whole has only been verified by
hand-tracing the code.
* Selectivenss. For a "selective" forwarding unit, this does not
currently have any means of being selective.
* Features. Presumably, someone might wish to only receive video from
specific sources. There are no external-facing functions at the moment
that allow for users to select who they receive video from.
* Efficiency. The current scheme treats all video streams as being
unidirectional. We could be re-using a source video stream as a
desetnation, too. But to simplify things on this first round, I did it
this way.
Change-Id: I7c44a829cc63acf8b596a337b2dc3c13898a6c4d
This patch is the first cut at adding stream support to the bridging framework.
Changes were made to the framework that allows mapping of stream topologies to
a bridge's supported media types.
The first channel to enter a bridge initially defines the media types for a
bridge (i.e. a one to one mapping is created between the bridge and the first
channel). Subsequently added channels merge their media types into the bridge's
adding to it when necessary. This allows channels with different sized
topologies to map correctly to each other according to media type. The bridge
drops any frame that does not have a matching index into a given write stream.
For now though, bridge_simple will align its two channels according to size or
first to join. Once both channels join the bridge the one with the most streams
will indicate to the other channel to update its streams to be the same as that
of the other. If both channels have the same number of streams then the first
channel to join is chosen as the stream base.
A topology change source was also added to a channel when a stream toplogy
change request is made. This allows subsystems to know whether or not they
initiated a change request. Thus avoiding potential recursive situations.
ASTERISK-26966 #close
Change-Id: I1eb5987921dd80c3cdcf52accc136393ca2d4163
When a T.38 happens immediatly after call establishment, the control
frame can be lost because the other leg is not yet in the bridge.
This patch detects this case an makes sure T.38 negotation happens
when the 2nd leg is being made compatible with the negotating
first leg
ASTERISK-26923 #close
Change-Id: If334125ee61ed63550d242fc9efe7987e37e1d94
Some codecs - codec_speex specifically - take voice frames and return
other types of frames, like CNG. If we subsequently treat those as
voice frames, we'll run into trouble when destroying the frame because
of the requirement that each voice frame have an associated format.
ASTERISK-26880 #close
Reported by: Kirsty Tyerman
Change-Id: I43f8450c48fb276ad8b99db8512be82949c1ca7c
The bridge_native_rtp module did not properly handle the case where
a smart bridge operation occurs while a channel is suspended. In this
scenario the module would incorrectly set up local or remote RTP
bridging despite the media having to flow through Asterisk. The remote
endpoint would see two media streams and experience wonky audio.
The module has been changed so that it ensures both channels are
not suspended when performing the native RTP bridging and this
requirement has been documented in the bridge technology.
ASTERISK-26781
Change-Id: Id4022d73ace837d4a293106445e3ade10dbc7c7c
Adds binaural synthesis to bridge_softmix (via convolution using libfftw3).
Binaural synthesis is conducted at 48kHz.
For a conference, only one spatial representation is rendered.
The default rendering is applied for mono-capable channels.
ASTERISK-26292
Change-Id: Iecdb381b6adc17c961049658678f6219adae1ddf
In native_rtp_bridge_compatible_check()
* Made one variable declaration per line.
* Extracted if test assignment to make the test easier to see.
* Made long if tests easier to see the combinatorial logic.
* Added bridge id to a couple debug messages.
Change-Id: I65bc5732aa7c9a2537f062f106fbea711cf2daad
native_rtp_bridge_compatible() didn't lock the bridge channels before
checking the channels for native bridging ability. As a result, one of
the channel's native format capabilities structure got replaced out from
under the native bridge check. Use of a stale pointer to freed memory
causes bad things to happen.
MALLOC_DEBUG, DO_CRASH, and the
tests/channels/pjsip/transfers/blind_transfer/caller_direct_media
testsuite test caught this.
* Add missing channel locking in native_rtp_bridge_compatible().
Change-Id: If25fdb3ac8e85563c4857fb8216b3d9dc3d0fa53
This is a regression over Asterisk 11, introduced by
2dc8a06006. Previously, recordings started via
the automon DTMF code would automatically be mixed together using sox because
app_monitor would be called with the m option. This commit restores this
behavior.
Change-Id: Ibaf58684285c3f1b6ca3714524e6d638ae3b3759
WebRTC clients really, really want to know the SSRC of the media they're
getting. Changing the SSRC is generally not a good thing.
bridge_softmix, starting in Asterisk 12, started changing the SSRC of
parties as they joined or left the bridge. With most phones, this isn't
a problem: phones just play back the stream they're getting. With WebRTC
clients, however, the SSRC is tied to a media stream that may be
negotiated. When a new SSRC just shows up, the media can be dropped.
As it turns out, the SSRC change shouldn't even be necessary. From the
perspective of the client, it's still talking to Asterisk with the same
media stream: why indicate that the far party has suddenly changed to a
different source of media?
This patch opts to just remove the SSRC changes. With this patch, video
clients that join/leave a softmix bridge actually get the video stream
instead of freaking out.
ASTERISK-26555
Change-Id: I27fec098b32e7c8718b4b65f3fd5fa73527968bf
ASTERISK_REGISTER_FILE no longer has any purpose so this commit removes
all traces of it.
Previously exported symbols removed:
* __ast_register_file
* __ast_unregister_file
* ast_complete_source_filename
This also removes the mtx_prof static variable that was declared when
MTX_PROFILE was enabled. This variable was only used in lock.c so it
is now initialized in that file only.
ASTERISK-26480 #close
Change-Id: I1074af07d71f9e159c48ef36631aa432c86f9966
softmix_bridge_join() failed because of an allocation failure. To address
this, the softmix bridge technology now checks if the channel failed to
join softmix successfully. In addition, the bridge now begins the process
of kicking the channel out of the bridge so we don't have channels
partially in the bridge for very long.
* Fix the test_channel_feature_hooks.c unit tests. The test channel must
have a valid codec to join the simple_bridge technology. This patch makes
joining a bridge more strict by not allowing partially joined channels to
remain in the bridge.
Change-Id: I97e2ade6a2bcd1214f24fb839fda948825b61a2b
Fix off nominal crash where we could not setup the channel to process
frames for the softmix bridge technology because of allocation failure.
Change-Id: Ic307a8386e46bf551e48fcd1eb97276714d56372
This reverts commit f42d22d3a1.
Unfortunately, using a bridge to manage T.38 state will cause severe deadlocks
in core_unreal/chan_local. Local channels attempt to reach across both their
peer and the peer's bridge to inspect T.38 state. Given the propensity of
Local channel chains, managing the locking situation in such a scenario is
practically infeasible.
Change-Id: I932107387c13aad2c75a7a4c1e94197a9d6d8a51
When 4875e5ac32 was merged, it fixed several issues with a direct media bridge
transitioning to handling a T.38 fax. However, it uncovered a race condition
caused by the bridging core. When a channel involved in a T.38 fax leaves a
bridge, the frame queued by the channel driver that should inform the far side
that it is no longer in a T.38 fax may not make it across the bridge. The
bridging framework is *extremely* aggressive in tearing down the bridge, and
control frames that are currently in flight *may* get dropped.
This patch adds a new module to the bridging framework, bridge_t38. This module
maintains some notion of the T.38 state for the two channels in a bridge. When
the bridge detects that it is being torn down or when one of the two channels
leaves, it informs the respective channel(s) that they should stop faxing. This
ensures that channels switch back to audio if they survive and are ejected out
of a bridge while faxing.
ASTERISK-25582
Change-Id: If5b0bb478eb01c4607c9f4a7fc17c7957d260ea0
Currently, if a blank musiconhold.conf is used, musiconhold will fail
to start for a channel going into a holding bridge with an anticipation
of getting music on hold. That being the case, no frames will be written
to the channel and that can pose a problem for blind transfers in PJSIP
which may rely on frames being written to get past the REFER framehook.
This patch makes holding bridges start a silence generator if starting
music on hold fails and makes it so that if no music on hold functions
are installed that the ast_moh_start function will report a failure so
that consumers of that function will be able to respond appropriately.
ASTERISK-25271 #close
Change-Id: I06f066728604943cba0bb0b39fa7cf658a21cd99
(cherry picked from commit 8458b8d441)
The bridge_native_rtp module adds a frame hook to channels which are in
a native RTP bridge. This frame hook is used to intercept when a hold
or unhold frame traverses the bridge so native RTP can be stopped or
started as appropriate. This is expected but exposes a specific bug
when attended transfers are involved.
Upon completion of an attended transfer an unhold frame is queued up
to take one of the channels involved off hold. After this is done
the channel is moved between bridges.
When the frame hook is involved in this case for the unhold it
releases the channel lock and acquires the bridge lock. This
allows the bridge core to step in and move the channel
(potentially changing the bridging techology) from another thread.
Once completed the bridge lock is released by the bridge core.
The frame hook is then able to acquire the bridge lock and
wrongfully starts native RTP again, despite the channel no longer
being in the bridge or needing to start native RTP. In fact at
this point the frame hook is no longer attached to the channel.
This change makes it so the native RTP bridge data is available to
the frame hook when it is invoked. Whether the frame hook has
been detached or not is stored on the native RTP bridge data and
is checked by the frame hook before starting or stopping native
RTP bridging. If the frame hook has been detached it does nothing.
ASTERISK-25240 #close
Change-Id: I13a73186a05f4e5a764f81e5cd0ccec1ed1891d2
Git does not support the ability to replace a token with a version
string during check-in. While it does have support for replacing a
token on clone, this is somewhat sub-optimal: the token is replaced
with the object hash, which is not particularly easy for human
consumption. What's more, in practice, the source file version was often
not terribly useful. Generally, when triaging bugs, the overall version
of Asterisk is far more useful than an individual SVN version of a file. As a
result, this patch removes Asterisk's support for showing source file
versions.
Specifically, it does the following:
* Rename ASTERISK_FILE_VERSION macro to ASTERISK_REGISTER_FILE, and
remove passing the version in with the macro. Other facilities
than 'core show file version' make use of the file names, such as
setting a debug level only on a specific file. As such, the act of
registering source files with the Asterisk core still has use. The
macro rename now reflects the new macro purpose.
* main/asterisk:
- Refactor the file_version structure to reflect that it no longer
tracks a version field.
- Remove the "core show file version" CLI command. Without the file
version, it is no longer useful.
- Remove the ast_file_version_find function. The file version is no
longer tracked.
- Rename ast_register_file_version/ast_unregister_file_version to
ast_register_file/ast_unregister_file, respectively.
* main/manager: Remove value from the Version key of the ModuleCheck
Action. The actual key itself has not been removed, as doing so would
absolutely constitute a backwards incompatible change. However, since
the file version is no longer tracked, there is no need to attempt to
include it in the Version key.
* UPGRADE: Add notes for:
- Modification to the ModuleCheck AMI Action
- Removal of the "core show file version" CLI command
Change-Id: I6cf0ff280e1668bf4957dc21f32a5ff43444a40e
With this patch, chan_pjsip/res_pjsip now sets the native formats to the
codecs negotiated by a call.
* The changes in chan_pjsip.c and res_pjsip_sdp_rtp.c set the native
formats to include all the negotiated audio codecs instead of only the
initial preferred audio codec and later the currently received audio
codec.
* The audio frame handling in channel.c:ast_read() is more streamlined and
will automatically adjust to changes in received frame formats. The new
policy is to remove translation and pass the new frame format to the
receiver except if the translation was to a signed linear format. A more
long winded version is commented in ast_read() along with some caveats.
* The audio frame handling in channel.c:ast_write() is more streamlined
and will automatically adjust any needed translation to changes in the
frame formats sent. Frame formats sent can change for many reasons such
as a recording is being played back or the bridged peer changed the format
it sends. Since it is a normal expectation that sent formats can change,
the codec mismatch warning message is demoted to a debug message.
* Removed the short circuit check in
channel.c:ast_channel_make_compatible_helper(). Two party bridges need to
make channels compatible with each other. However, transfers and moving
channels among bridges can result in otherwise compatible channels having
sub-optimal translation paths if the make compatible check is short
circuited. A result of forcing the reevaluation of channel compatibility
is that the asterisk.conf:transcode_via_slin and codecs.conf:genericplc
options take effect consistently now. It is unfortunate that these two
options are enabled by default and negate some of the benefits to the
changes in channel.c:ast_read() by forcing translation through signed
linear on a two party bridge.
* Improved the softmix bridge technology to better control the translation
of frames to the bridge. All of the incoming translation is now normally
handled by ast_read() instead of splitting any translation steps between
ast_read() and the slin factory. If any frame comes in with an unexpected
format then the translation path in ast_read() is updated for the next
frame and the slin factory handles the current frame translation.
This is the final patch in a series of patches aimed at improving
translation path choices. The other patches are on the following reviews:
https://reviewboard.asterisk.org/r/4600/https://reviewboard.asterisk.org/r/4605/
ASTERISK-24841 #close
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/4609/
........
Merged revisions 434671 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434672 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a channel enters the bridging system it is first made compatible with
the bridge and then the bridge technology makes the channel compatible
with the technology. For all but the DAHDI native and softmix bridge
technologies the make channel compatible with the bridge step is an
effective noop because the other technologies allow all audio formats.
For the DAHDI native bridge technology it doesn't matter because it is not
an initial bridge technology and chan_dahdi allows only one native format
per channel. For the softmix bridge technology, it is a noop at best and
harmful at worst because the wrong translation path could be setup if the
channel's native formats allow more than one audio format.
This is an intermediate patch for a series of patches aimed at improving
translation path choices.
* Removed code dealing with the unnecessary step of making the channel
compatible with the bridge.
ASTERISK-24841
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/4600/
........
Merged revisions 434424 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434430 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When more than one call using the same codec type enters into a softmix bridge
and no audio is present for a channel the bridge optimizes the out frame by
using the same one for all channels with the same codec type. Unfortunately,
when that number (channels with same codec type) dropped to <= 1 the codec
was not dereferenced. At least not until all parties left the bridge. Thus in
the case of G.729 the license was not released. This patch ensures that the
codec is dereferenced immediately when the optimization no longer applies.
ASTERISK-24797 #close
Reported by: Luke Hulsey
Review: https://reviewboard.asterisk.org/r/4429/
........
Merged revisions 432174 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 432175 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432176 65c4cc65-6c06-0410-ace0-fbb531ad65f3
After r425242 the fax/sip/directmedia_reinvite_t38 test started failing due to
the surviving channel not being re-INVITEd back from T.38 to audio. This patch
fixes that bug - a deeper explanation of what happened follows.
When two RTP channels are in a native bridge, the bridging layer will
investigate each via the get_rtp_info glue callback. This callback returns the
native bridge preference of the channel *at that moment in time* (that part is
key). At different points during the bridging, the native bridging layer will
inform the RTP capable channels of the status of the bridge via the update_peer
glue callback.
In a T.38 scenario with audio direct media, the sequence of events will often
look like the following:
* SIP/A and SIP/B both have audio and enter a native bridge.
* Asterisk re-INVITEs audio between SIP/A and SIP/B directly (via an
update_peer callback).
* SIP/A sends a re-INVITE to T.38, which causes Asterisk to send a re-INVITE
to T.38 to SIP/B. Assuming everyone 200 OKs the process, the UDPTL stack
receives UDPTL packets in Asterisk from both endpoints. From the perspective
of the channels, we are now in a local bridge for T.38, even though we are
technically still in a remote bridge in bridge_native_rtp. (YAY!)
* When one side hangs up, bridge_native_rtp is told to stop bridging. It then
re-evaluates the channels and asks them how they are bridged - and since
T.38 is enabled, they reply with a Local bridge (which is correct), but is
wrong because the audio portion is still technically in a remote bridge.
* Asterisk releases the surviving channel, whose audio is *not* re-INVITED
back to Asterisk as bridge_native_rtp incorrectly assumes that it was in a
local bridge.
Ironically, prior to r425242, this used to work mostly due to a fluke in the
bridging layer.
The purpose of the get_rtp_info callback shouldn't be modified: it should tell
the bridging layer what kind of bridge the channel prefers at that moment in
time. If you have T.38 enabled, that *must* be a local bridge, as the UDPTPL
stack must be in the media path. As such, this patch does not modify that
part of the code.
However, we have to tell the channels to re-evaluate themselves when they come
out of a native bridge, since we can no longer trust the get_rtp_info callbacks
when the native bridge is being stopped. Something else may have changed in the
channels, and they may now be lying to us. As such, this patch makes it so that
we unilaterally tell the channels that they are no longer bridged via the
update_peer callback. This is actually what the channels expect anyway: code in
both chan_sip and chan_pjsip's callbacks look at the T.38 state and - if they
were in T.38 - send a re-INVITE to get the audio back to Asterisk.
Review: https://reviewboard.asterisk.org/r/4157/
........
Merged revisions 427582 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 427583 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@427584 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a native RTP bridge that is remotely bridging its participants switches
to a softmix bridge, it may not properly re-INVITE the media for one or both
participants back to Asterisk. This is due to the current bridge_native_rtp
code only re-INVITEs if it believes the channel will survive the bridge
operation. Currently, that code is failing, as it expects the channels to
have a soft hangup flag set on it indicating that a redirect has occurred
or that the channel is going to leave the bridge. (The code did not take into
account a smart bridge operation).
This patch also renames a few things to be more reflective of the underlying
types.
Review: https://reviewboard.asterisk.org/r/3997/
ASTERISK-24327 #close
........
Merged revisions 425760 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 425761 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425762 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Joshua Colp
Jean Aunis
Richard Mudgett
Jenkins2
George Joseph
Mark Michelson
Kevin Harwell
Torrey Searle
Sean Bright
frahaase
Michael Kuron
Matt Jordan
Corey Farrell
Alexander Traud
Jonathan Rose
George Joseph