The append_mailbox function wasn't calculating the correct length
to pass to ast_alloca and it wasn't handling the case where context
might be empty.
Found by the Address Sanitizer.
Change-Id: I7eb51c7bd18a7a8dbdba261462a95cc69e84f161
app_voicemail was using the stasis cache to build and maintain a
list of mailboxes that had subscribers. It then used this list
to determine if a mailbox should be polled for new messages if
polling was enabled. For this to work, stasis had to cache every
subscription and unsubscription to the mailbox which caused a lot of
overhead, both cpu and memory related.
Since polling is only required when changes are being made to
mailboxes outside of app_voicemail and since the number of mailboxes
that don't have any subscribers is likely to be very low, all
mailboxes are now polled instead of just the ones with subscribers.
This paves the way for disabling the caching of stasis subscription
change messages.
Also fixed cleanup in some of the unit tests that not only left
test users in the users list but also caused segfaults if the tests
were run more than once.
ASTERISK-27121
Change-Id: I5cceb737246949f9782955c64425b8bd25a9e9ee
I'm only seeing an error in 14+, so I assume it is due to different
compiler options:
app_queue.c: In function ‘handle_queue_add_member’:
app_queue.c:10234:19: error: ‘%d’ directive writing between 1 and 11
bytes into a region of size 3 [-Werror=format-overflow=]
sprintf(num, "%d", state);
^~
app_queue.c:10234:18: note: directive argument in the range
[-2147483648, 99]
sprintf(num, "%d", state);
^~~~
Compiler: gcc version 8.0.1 20180414 (experimental)
[trunk revision 259383] (Ubuntu 8-20180414-1ubuntu2)
Change-Id: I18577590da46829c1ea7d8b82e41d69f105baa10
When a call leaves a queue on leaveempty condition, QUEUESTATUS
must be set to LEAVEEMPTY, no matter whether Queue was executed with or
without the "c" (continue) option.
The regression was introduced in the fix for ASTERISK_25665.
The following fix (ASTERISK_27065) was incomplete, as QUEUESTATUS was
overwritten in case when "c" is set, regardless of what was the cause
for leaving the queue.
ASTERISK-27973 #close
Reported-by: Valentin Safonov
Change-Id: Iec013fe6a26a4e825ca572a1dda4f3cee5f6f80c
I have removed the STATIC_BUILD option immediately as it has not
been maintained in many years and is non-functional.
ASTERISK-27965
Change-Id: I64783d017b86dba9ee3c7bcfb97e59889a3f76d7
Previously, the msid "label" attribute was used to correlate
participant info but because streams could be reused, the msid
wasn't being updated correctly when someone left the bridge and
another joined.
Now, instead of looking for the msid attribute on a channel's streams,
app_confbridge sets an "SDP:LABEL" attribute on the stream which
res_pjsip_sdp_rtp looks for. If it finds it, it adds a "label"
attribute to the current sdp.
Change-Id: I6cbaa87fb59a2e0688d956e72d2d09e4ac20d5a5
If a conference is ended very quickly after it was created (i.e., the
first user immediately hangs up) then the conference bridge and announcer
channels are not removed.
When a conference is created, the push_announcer() function is added to
the playback queue task processor and the conference object reference is
bumped. If a conference is ended while the push_announcer() function is
still going then the ao2_cleanup(conference) at the end of
push_announcer() will call the destructor function -
destroy_conference_bridge().
The destroy_conference_bridge() function will then add the
hangup_playback() task to the playback queue and will wait for it to end.
Since it is already a current task of the playback queue it will wait
forever.
This patch makes the conference thread call push_announcer() directly.
This way the conference object reference bump is not needed. Since the
playback queue task processor is only used by the conference thread
itself, there is no danger of trying to play announcements before the
announcer is pushed to the bridge.
ASTERISK-27870 #close
Change-Id: I947a50fb121422d90fd1816d643a54d75185a477
With the participant info code in app_confbridge, we were still
in the process of adding the channel to the bridge when trying to send
an in-dialog MESSAGE. This caused 2 threads to grab the channel
blocking flag at the same time. To mitigate this, the participant
info code was moved to confbridge_manager so it runs after all
channel/bridge actions have finished.
Change-Id: I228806ac153074f45e0b35d5236166e92e132abd
Add predial handler support to app_queue. app_dial (ASTERISK_19548) and
app_originate (ASTERISK_26587) have the ability to execute predial
handlers on caller and callee channels. This patch adds predial handlers
to app_queue and uses the same options as Dial and Originate (b and B).
The caller routine gets executed when the caller first enters the queue.
The callee routine gets executed for each queue member when they are about
to be called.
ASTERISK-27912
Change-Id: I5acf5c32587ee008658d12e8a8049eb8fa4d0f24
There can be one and only one thread handling a channel's media at a time.
Otherwise, we don't know which thread is going to handle the media frames.
ASTERISK-27625
Change-Id: Ia341f1a6f4d54f2022261abec9021fe5b2eb4905
This patch changes the way asterisk polls output from mpg123, instead
of waiting for 10 seconds(when playing an http url) it now uses a
timeout of one second and iterates 10 times using this same timeout.
The main difference is that for every timeout asterisk receives it now
checks if mpg123 is still running before poll again.
ASTERISK-27752
Change-Id: Ib7df8462e3e380cb328011890ad9270d9e9b4620
ConfBridge can now send events to participants via in-dialog MESSAGEs.
All current Confbridge events are supported, such as ConfbridgeJoin,
ConfbridgeLeave, etc. In addition to those events, a new event
ConfbridgeWelcome has been added that will send a list of all
current participants to a new participant.
For all but the ConfbridgeWelcome event, the JSON message contains
information about the bridge, such as its id and name, and information
about the channel that triggered the event such as channel name,
callerid info, mute status, and the MSID labels for their audio and
video tracks. You can use the labels to correlate callerid and mute
status to specific video elements in a webrtc client.
To control this behavior, the following options have been added to
confbridge.conf:
bridge_profile/enable_events: This must be enabled on any bridge where
events are desired.
user_profile/send_events: This must be set for a user profile to send
events. Different user profiles connected to the same bridge can have
different settings. This allows admins to get events but not normal
users for instance.
user_profile/echo_events: In some cases, you might not want the user
triggering the event to get the event sent back to them. To prevent it,
set this to false.
A change was also made to res_pjsip_sdp_rtp to save the generated msid
to the stream so it can be re-used. This allows participant A's video
stream to appear as the same label to all other participants.
Change-Id: I26420aa9f101f0b2387dc9e2fd10733197f1318e
There was no real reason to limit the conteny type to text/plain other
than that's what it was limited to before. Now any text/* content
type will be allowed for channel drivers that don't support enhanced
messaging and any type will be allowed for channel drivers that do
support enhanced messaging.
Change-Id: I94a90cfee98b4bc8e22aa5c0b6afb7b862f979d9
When an AMI client connects, it cannot determine if a user was talking
prior to a transition in the user speaking state (which would generate
a ConfbridgeTalking event). This patch causes app_confbridge to track the
talking state and make this state available via ConfBridgeList.
ASTERISK-27877 #close
Change-Id: I19b5284f34966c3fda94f5b99a7e40e6b89767c6
The MeetmeJoin, MeetmeLeave, MeetmeEnd, MeetmeMute, MeetmeTalking, and
MeetmeTalkRequest AMI events were documented with sending out a Usernum
header when the User header was actually output.
* Change the online documentation to match reality.
ASTERISK-27873
ASTERISK-25261
Change-Id: I437bc70618d07c183c9624b7069c2fcae7f17a39
Fix data-type mismatch between app_voicemail and database columns
exposed by new version of MariaDB
ASTERISK-27760
Change-Id: I8543ad480a08c98be78bde1ee870e6e6c84b2c5b
Correct the log warning message shown when ODBC voicemail
retrieve_file is called and there is a null value in the category
column.
A more meaningfull message is now written at debug level.
ASTERISK-27853
Change-Id: Ic36e97d5eb070a23a12ba45972f6b53e2182a3f4
This fixes build warnings found by GCC 8. In some cases format
truncation is intentional so the warning is just suppressed.
ASTERISK-27824 #close
Change-Id: I724f146cbddba8b86619d4c4a9931ee877995c84
Use AST_PBX_MAX_STACK to escape if we recurse 128 times. This will
prevent crash if dialplan contains an include loop. Log an error when
this occurs, at most one message per call to Macro() so we avoid logger
spam.
ASTERISK-26570 #close
Change-Id: I6c71b76998c31434391b150de055ae9a531e31da
Fixes a bug on the "confbridge show profile bridge" cli command
that showed "video_mode=no video" when video_mode was set
to "sfu"
ASTERISK-27418 #close
Change-Id: I481e3172c7f872664c7ac7809879d541c9f031e9
This change adds the ability for multiple REMB reports in
bridge_softmix to be combined according to a configured
behavior into a single report. This single report is sent
back to the sender of video, which adjusts the encoding bitrate
to be at or below the bitrate of the report. The available
behaviors are: lowest, highest, and average. Lowest uses the
lowest received bitrate. Highest uses the highest received
bitrate. Average goes through the received bitrates adding
them to the previous average and creates a new average.
Other behaviors can be added in the future and the existing
average one may be adjusted, but this provides the foundation
to do so.
Support for configuring which behavior to use has been
added to app_confbridge.
ASTERISK-27804
Change-Id: I9eafe4e7c1f72d67074a8d6acb26bfcf19322b66
SendText now accepts new channel variables that can be used
to override the To and From display names and set the Content-Type
of a message. Since you can now set Content-Type, other text/*
content types are now valid.
Change-Id: I648b4574478119f95de09d9f08e9595831b02830
This change adds a configuration option to app_confbridge which can be
used to set the interval at which we will send a combined REMB (remote
estimated maximum bitrate) frame to sources of video. The bridging API
has also been extended slightly to allow setting this so bridge_softmix
can use it.
ASTERISK-27786
Change-Id: I0e49eae60f369c86434414f3cb8278709c793c82
Add an option to make app_originate not wait for the created channel
to answer.
Change-Id: I7fc2facd77079abc6321f44e8bcd4e39298de2ae
Requested-by: Frederic Steinfels <fst@highdefinition.ch>
Signed-off-by: Russell Bryant <russell@russellbryant.net>
Asterisk does not need the development package of libltdl, because it does not
use any symbol of -lltdl directly. Instead, it uses the runtime package via the
shared library -lodbc. On the supported platforms, that shared library declares
its dependency on -lltdl correctly, otherwise AST_EXT_LIB_CHECK would have
failed.
ASTERISK-27745
Change-Id: Icd315809b8e7978203431f3afb66240dd3a040ba
Certain applications (e.g. door-phone) require that also video is transmitted
before a call is accepted.
Change-Id: I9842e1dc2f6e1c2c49dc33fe615255007d2f821e
When app_voicemail calls ast_test_suite_notify with the results of
a user keypress, it formats the keypress as '%c'. If the user hung up
or some other error occurrs, the result of the keypress is a non
printable character. This ultimately causes json_vpack_ex to think
it's being passed a non utf-8 string and return an error.
* Keypress results passed to ast_test_suite_notify are now checked with
isprint() and a '?' is substituted if the check fails.
Change-Id: I78ee188916bbac840f3d03f40201b692347ea865
* acl (named_acl.c)
* cdr
* cel
* ccss
* dnsmgr
* dsp
* enum
* extconfig (config.c)
* features
* http
* indications
* logger
* manager
* plc
* sounds
* udptl
These modules are now loaded at appropriate time by the module loader.
Unlike loadable modules these use AST_MODULE_LOAD_FAILURE on error so
the module loader will abort startup on failure of these modules.
Some of these modules are still initialized or shutdown from outside the
module loader. logger.c is initialized very early and shutdown very
late, manager.c is initialized by the module loader but is shutdown by
the Asterisk core (too much uses it without holding references).
Change-Id: I371a9a45064f20026c492623ea8062d02a1ab97f
The menuselect comment was updated to deprecate these modules but the
AST_MODULE_INFO block at the end of file was missed.
ASTERISK-27671
Change-Id: I63070b5c4d4f08af010c6034acd4793c1bcef839
Checking option_debug directly is incorrect as it ignores file/module
specific debug settings. This system-wide change replaces nearly all
direct checks for option_debug with the DEBUG_ATLEAST macro.
Change-Id: Ic342d4799a945dbc40ac085ac142681094a4ebf0
astosp.h is leftover from when logic was split between app_osplookup and
res_osp. All logic was moved into app_osplookup by 109737eb1c in 2006,
but astosp.h remained. This moves the remaining defines into
app_osplookup and deletes astosp.h.
Change-Id: I0a6c4debd7c9543b608520b1765abfa4fab7b2fd
Between Asterisk 11 and Asterisk 13 there was a significant increase
in the number of AST_FRAME_NULL frames being processed by app_amd.c's
main loop. Each AST_FRAME_NULL frame was being counted as 100ms
towards the total time and silence. This may have been accurate
when app_amd.c was orginally added, but it is not in Asterisk 13.
As such the total analysis time and silence calculations were way
off effectively breaking app_amd.c
* Additional debug messages were added
* AST_FRAME_NULL are now ignored
ASTERISK-27610
Change-Id: I18aca01af98f87c1e168e6ae0d85c136d1df5ea9
* app_fax (replaced by res_fax).
* res_config_sqlite (replaced by res_config_sqlite3).
* res_monitor (replaced by app_mixmonitor).
This is related to ASTERISK~23657 but does not resolve that ticket.
Resolving that ticket would require complete removal of res_monitor.
ASTERISK-27671 #close
Change-Id: I16a3edd61fc1abd4a7b2e9357693ed663f62dd49
* Made the AMI ConfbridgeList action's ConfbridgeList events output all
the standard channel snapshot headers instead of a few hand-coded channel
snapshot headers. The benefit is that the CallerIDName gets disruptive
characters like CR, LF, Tab, and a few others escaped. However, an empty
CallerIDName is now output as "<unknown>" instead of "<no name>".
ASTERISK-27651
Change-Id: Iaf7d54a9d40194c2db060bc9b4979fab6720d977
The dsp_talking_threshold does not represent time in milliseconds. It
represents the average magnitude per sample in the audio packets. This is
what the DSP uses to determine if a packet is silence or talking/noise.
Change-Id: If6f939c100eb92a5ac6c21236559018eeaf58443
This removes references that are no longer needed due to automatic
references created by module dependencies.
In addition this removes most calls to ast_module_check as they were
checking modules which are listed as dependencies.
Change-Id: I332a6e8383d4c72c8e89d988a184ab8320c4872e
I've audited all modules that include any header which includes
asterisk/optional_api.h. All modules which use OPTIONAL_API now declare
those dependencies in AST_MODULE_INFO using requires or optional_modules
as appropriate.
In addition ARI dependency declarations have been reworked. Instead of
declaring additional required modules in res/ari/resource_*.c we now add
them to an optional array "requiresModules" in api-docs for each module.
This allows the AST_MODULE_INFO dependencies to include those missing
modules.
Change-Id: Ia0c70571f5566784f63605e78e1ceccb4f79c606
This patch adds the ability to configure a prompt which will be read
to the "winner" who pressed 1 (or the configured value) and received
the call.
ASTERISK-24372 #close
Change-Id: I6ec1c6c883347f7d1e1f597189544993c8d65272
* Declare 'requires' and 'enhances' text fields on module info structure.
* Rename 'nonoptreq' to 'optional_modules'.
* Update doxygen comments.
Still need to investigate dependencies among modules I cannot compile.
Change-Id: I3ad9547a0a6442409ff4e352a6d897bef2cc04bf
The check for last_user == NULL needs to happen before we dereference
the variable, previously it was possible for us to check flags of a NULL
last_user.
Change-Id: I274f737aa8af9d2d53e4a78cdd7ad57561003945
Fix instances of:
* Retreive
* Recieve
* other then
* different then
* Repeated words ("the the", "an an", "and and", etc).
* othterwise, teh
ASTERISK-24198 #close
Change-Id: I3809a9c113b92fd9d0d9f9bac98e9c66dc8b2d31
* mwi_sub_event_cb: mwist leaked on separate_mailbox failure.
* add_email_attachment: A reference to sox_gain_tmpdir was used
after the storage was out of scope.
Change-Id: I6282c542ff7b82fa091177a912d11234a8b00a30
This patch adds the ability to set the wrapuptime on the queue member
config.
When the option is set the wrapuptime on the queue member is used instead
of the queue's wrapuptime.
ASTERISK-27483 #close
Change-Id: I11c85809537f974eb44dc5bbf82bcedd8a458902
The Local channel has never supported app_transfer
from what I can see so remove it from the documentation.
ASTERISK-25649
Change-Id: Icbcfe297f6f866285a26b3e9fd5c6d00fa22e0e9
Remove nearly all use of regex from ACO users. Still remaining:
* app_confbridge has a legitamate use of option name regex.
* ast_sorcery_object_fields_register is implemented with regex, all
callers use simple prefix based regex. I haven't decided the best
way to fix this in both 13/15 and master.
Change-Id: Ib5ed478218d8a661ace4d2eaaea98b59a897974b
Currently, to figure out specified voicemail's status, there's only one
way to do it, which is use a VoicemailUserEntry AMI message.
But it consumed it too much resource(it check everything).
So, added new AMI action.
ASTERISK-27470
Change-Id: Ie4eba1424a142e5fbd1d9fb1821a3fc1a1e238b7
The approach with having a single global subscription to all extension
state changes has one issue: dynamically created hints don't have any
watchers and are therefore garbage collected on the first dialplan
reload.
This change creates a state subscription for every queue member with a
hint as state_interface, thus increasing the count of watches for
hints, so they are not destroyed prematurely anymore.
There are 2 side effects:
1. The state change callback in app_queue is not executed when
there are no members referring to the extension.
2. The callback is called multiple times for the same hint if it's
associated with more than one queue member.
Reported by: Steven T. Wheeler
ASTERISK-18411 #close
Change-Id: I4956af2136ea2a7f110ac9272eae5f6e676d8f89
There are many places in the code base where we ignore the return value
of fcntl() when getting/setting file descriptior flags. This patch
introduces a convenience function that allows setting or clearing file
descriptor flags and will also log an error on failure for later
analysis.
Change-Id: I8b81901e1b1bd537ca632567cdb408931c6eded7
Currently, when the app_voicemail sending VoicemailUserEntry AMI event, there's
no OldMessageCount info for default.
To check the OldMessageCount info, it required IMAP_STORAGE define, but this is
not correct.
Added OldMessageCount item as a default.
ASTERISK-27456
Change-Id: I5c71521c2d1daf8b7b161e31c34d28cca6aea4c7
Instead of specifying AST_MODFLAG_LOAD_ORDER with load_pri
AST_MODPRI_DEFAULT just use AST_MODFLAG_DEFAULT.
Change-Id: I0123258eafce324249433a69df15a85cc16e509f
Declare 'res' initialized to -1 to deal with earlier error paths that
could cause 'res' to be returned uninitialized.
Change-Id: I8ac2a5755bf4174d89ef893e924c940f702b104e
We've been calling pbx_builtin_setvar_helper to set the
RECORD_STATUS variable before actually closing the recorded file.
If a client is watching VarSet events and tries to do something with
the file when a RECORD_STATUS event is seen, they might attempt to
do so while the file it's still open.
We now delay calling pbx_builtin_setvar_helper until after we close
the file.
ASTERISK-27423
Change-Id: I7fe9de99953e46b4bafa2b38cf151fe8f6488254
When (v)asprintf() fails, the state of the allocated buffer is undefined.
The library had better not leave an allocated buffer as a result or no one
will know to free it. The most likely way it can return failure is for an
allocation failure. If the printf conversion fails then you actually have
a threading problem which is much worse because another thread modified
the parameter values.
* Made __ast_asprintf()/__ast_vasprintf() set the returned buffer to NULL
on failure. That is much more useful than either an uninitialized pointer
or a pointer that has already been freed. Many uses won't have to check
for failure to ensure that the buffer won't be double freed or prevent an
attempt to free an uninitialized pointer.
* stasis.c: Fixed memory leak in multi_object_blob_to_ami() allocated by
ast_asprintf().
* ari/resource_bridges.c:ari_bridges_play_helper(): Remove assignment to
the wrong thing which is now not needed even if assigning to the right
thing.
Change-Id: Ib5252fb8850ecf0f78ed0ee2ca0796bda7e91c23
* Stop using ast_module_helper to check if a module is loaded, use
ast_module_check instead (app_confbridge and app_meetme).
* Stop ast_module_helper from listing reload classes when needsreload
was not requested.
ASTERISK-27378
Change-Id: Iaed8c1e4fcbeb242921dbac7929a0fe75ff4b239
Fix typo, that specify usage wrong option 'dtmf-features' for CHANNEL() function
instead of correct 'dtmf_features'
ASTERISK-27377 #close
Change-Id: I15ecc829c1035b359584673e12cdb5c9291ac930
* Mark the module deprecated.
* Disable the module by default.
* Produce a warning the first time a macro is used.
* Note deprecation related options in app_dial and app_queue.
ASTERISK-27350
Change-Id: I560ea043bacdbc5534a17d97854273d52c2f1bdc
We were ignoring the return value from ast_pbx_outgoing_exten() and
ast_pbx_outgoing_app() which could fail before setting the reason code.
This resulted in failures being reported as success.
ASTERISK-25266 #close
Reported by: Allen Ford
Change-Id: Idf16237b7e41b527d2c69c865829128686beeb3b
The previous patch for ASTERISK-27216 made it so you wouldn't get any
position or periodic announcements unless you had announce-to-first-user
enabled. The announce-to-first-user feature was added by ASTERISK_21782
as a result of the patch which introduced the redundant announcements that
ASTERISK-27216 removes.
* By noting that the makeannouncement variable is used to suppresses the
first user announcement, we set its initial value to the
announce-to-first-user enable setting.
ASTERISK-27216
Change-Id: Ieaeb7dbea8ae7073086b775fbafe0625b000b10a
This patch reverts the change by patch 2263 from old reviewboard.
Note that reverting that 2263-patch still preserves the behaviour that
the commit log of the 2263-patch claimed to add. The reason for this is:
The function wait_for_answer is only called from try_calling which
in turn is only called from the main for loop in queue_exec, and
earlier in that loop we already check the things that's removed by
this patch. There's no need to check those things twice each loop
iteration, and I think the proper place to check it is before each
ringing cycle. By checking it in wait_for_answer, you allow the issue
explained in the jira - that the head caller hears announcements while
the agents' sip phones are actively ringing.
Reported-by: Stefan Engström
Tested-by: Stefan Engström
ASTERISK-27216 #close
Change-Id: Ic4290dc75256f9743900c6762ee1bb915f672db0
Discovered while experimenting with Cyber Mega Phone 2K Ultimate Dynamic
Edition after accepting the audio request but declining the video one.
Change-Id: Iaa86d41fccfbc1b559a30ccf740d78a3b5f8a98c
This change makes it so that the conference recorder channel
that is created only contains audio formats and an audio stream.
This is because the underlying application used by ConfBridge to
record, MixMonitor, only allows recording audio.
Having additional streams (and in particular a video stream) can
result in clients needlessly renegotiating to add a video stream
that will never receive video.
Change-Id: I89d38aedc9205eca7741d5435e73e73bb9de97a0
* WaitForSilence completes successfully if it receives no media in the
specified timeout, but when acting as WaitForNoise that logic needs
to be reversed.
* Use standard argument parsing macros and add some error checking for
invalid values.
* The documentation indicated that the first argument to both
WaitForSilence and WaitForNoise was required when it was not. Update
the documentation to reflect that.
* Wrap up some behavior in structs to avoid boolean checks all over the
place.
ASTERISK-24066 #close
Reported by: M vd S
Change-Id: I01d40adc5b63342bb5018a1bea2081a0aa191ef9
An admin can configure app_minivm with an externnotify program to be run
when a voicemail is received. The app_minivm application MinivmNotify
uses ast_safe_system() for this purpose which is vulnerable to command
injection since the Caller-ID name and number values given to externnotify
can come from an external untrusted source.
* Add ast_safe_execvp() function. This gives modules the ability to run
external commands with greater safety compared to ast_safe_system().
Specifically when some parameters are filled by untrusted sources the new
function does not allow malicious input to break argument encoding. This
may be of particular concern where CALLERID(name) or CALLERID(num) may be
used as a parameter to a script run by ast_safe_system() which could
potentially allow arbitrary command execution.
* Changed app_minivm.c:run_externnotify() to use the new ast_safe_execvp()
instead of ast_safe_system() to avoid command injection.
* Document code injection potential from untrusted data sources for other
shell commands that are under user control.
ASTERISK-27103
Change-Id: I7552472247a84cde24e1358aaf64af160107aef1
This prevents orphaned CBAnn channels from getting stuck in the bridge.
ASTERISK-26994 #close
Reported by: James Terhune
Change-Id: I5e43e832a9507ec3f2c59752cd900b41dab80457
mkstemp() returns a unique filename, but appending an extension to that
filename does not guarantee uniqueness. Instead, use mkdtemp() and we
can put whatever extension we want on the files that we create inside
the directory.
In the case of app_minivm, we also now properly clean up any temporary
files that we create.
ASTERISK-20858 #close
Reported by: Walter Doekes
Change-Id: I30ad04f0e115f0b11693ff678ba5184d8b938e43
If the Record() application is called with a relative filename that
includes directories, we were not properly creating the intermediate
directories and Record() would fail.
Secondarily, updated the documentation for RECORDED_FILE to mention
that it does not include a filename extension.
Finally, rewrote the '%d' functionality to be a bit more straight
forward and less noisy.
ASTERISK-16777 #close
Reported by: klaus3000
Change-Id: Ibc2640cba3a8c7f17d97b02f76b7608b1e7ffde2
Fixed to use correct initial value and fixed to use the
correct queue info to check the first value.
ASTERISK-27204
Change-Id: Ia9e36c828e566e1cc25c66f73307566e4acb8e73
GCC 7 has added capability to produce warnings, this fixes most of those
warnings. The specific warnings are disabled in a few places:
* app_voicemail.c: truncation of paths more than 4096 chars in many places.
* chan_mgcp.c: callid truncated to 80 chars.
* cdr.c: two userfields are combined to cdr copy, fix would break ABI.
* tcptls.c: ignore use of deprecated method SSLv3_client_method().
ASTERISK-27156 #close
Change-Id: I65f280e7d3cfad279d16f41823a4d6fddcbc4c88
Setting this option will cause the Queue application to only announce
the caller's position if it has improved since the last time that we
announced it.
Change-Id: I173a124121422209485b043e2bf784f54242fce6
The following testsuite voicemail tests were failing to re-enter the
mailbox after the first login attempt.
tests/apps/voicemail/authenticate_invalid_mailbox
tests/apps/voicemail/authenticate_invalid_password
The tests were noting the start of the vm-incorrect-mailbox prompt and
immediately sending the mailbox for the next login attempt. Since the
invalid message playback had to complete before the digits were
recognized, the test passed for the wrong reason and added approximately
20 seconds to the test times.
* Allow the vm-incorrect-mailbox prompt to get interrupted by the mailbox
digits like the initial vm-login prompt so the tests are able to enter the
intended mailbox.
Change-Id: I1dc53fe917bfe03a4587b2c4cd24c94696a69df8
This change does a few things to improve packet loss and renegotiation:
1. On outgoing RTP streams we will now properly reflect out of order
packets and packet loss in the sequence number. This allows the
remote jitterbuffer to better reorder things.
2. Video updates can now be discarded for a period of time
after one has been sent to prevent flooding of clients.
3. For declined and removed streams we will now release any
media session resources associated with them. This was not
previously done and caused an issue where old state was being
used for a new stream.
4. RTP bundling was not actually removing bundled RTP instances
from the parent. This has been resolved by removing based on
the RTP instance itself and not the SSRC.
5. The code did not properly handle explicitly unbundling an
RTP instance from its parent. This now works as expected.
ASTERISK-27143
Change-Id: Ibd91362f0e4990b6129638e712bc8adf0899fd45
This commit fixes two possible scenarios:
* When recording name and if during recording you hangup, file is never
removed. This is due to the fact file location is nulled.
* When recording name and if you hangup during thank-you prompt, file
is never removed.
ASTERISK-27123 #close
Change-Id: I39b7271408b4b54ce880c5111a886aa8f28c2625
In say_date_generic the timezonename parameter is passed but never
used. Fix it by passing it to the ast_localtime function.
ASTERISK-27124
Change-Id: I63106b8db10426d417d7275f22554a616e92fae4
When performing the "Queues" action via AMI, it outputs the same
text that the Asterisk CLI outputs when running a "queue show"
command, which does not conform with the AMI spec. "QueueStatus"
already does what the "Queues" action should do, so instead of
correcting the output, the "Queues" action will be removed and
"QueueStatus" should be used instead.
ASTERISK-27073 #close
Reported by: Brian
Change-Id: Id11743859758255b69cc3a557750d7a56c6d16f8
This API was not actively maintained, was not added to new modules
(such as res_pjsip), and there exist better alternatives to acquire the
same information, such as the ARI.
Change-Id: I4b2185a83aeb74798b4ad43ff8f89f971096aa83
The primary focus of this patch is adding a missing call to
ast_odbc_release_obj(), but is also a general cleanup of the ODBC
related code in app_voicemail.
ASTERISK-27093 #close
Change-Id: I8e285142eaeb3146b4287a928276b70db76c902b
Fixed the following bugs:
* calls to stream_echo_write had the last two parameters swapped
* ast_read should have been ast_read_stream
* added a null check on the frame's subclass format
This also resets the update_sent flag upon receiving SRRCHANGE control frame.
This will then force a video update.
ASTERISK-26997
Change-Id: I6ad7c8253559b800800433c52339e7f5aa583566
The fix for ASTERISK-25665 introduced a regression.
The return value of queue_exec used to be 0 in case of leavewhenempty
but it was changed to -1 (returned from wait_our_turn and passed
transparently by queue_exec), thus leading to hangup instead of returning
back to dialplan.
This commit resets the value back to 0 in this case, restoring
original behavior.
ASTERISK-27065 #close
Reported by: Marek Cervenka
Change-Id: Id9c83b75aeda463250155e88c5004be52bbca5ac
A new global option "imap_poll_logout" was added to specify whether need to
disconnect from the IMAP server after polling of mailboxes.
ASTERISK-27068 #close
Closing IMAP connection after loading mailbox from voicemail.conf
ASTERISK-24052 #close
Change-Id: Ib7558ba04516240a32b65f42e9be64372a0ae12a
George Joseph
lvl
Rodrigo Ramírez Norambuena
Sean Bright
Ivan Poddubny
Joshua Colp
Robert Mordec
Kristian F. Høgh
Richard Mudgett
Jenkins2
Sam Wierema
William McCall
Nic Colledge
Corey Farrell
Chris-Savinovich
Russell Bryant
Alexander Traud
Florian Floimair
Kevin Harwell
Sungtae Kim
Michael Cargile
ghjm
Igor Goncharovskiy
Nathan Bruning
StefanEng86
Sergej Kasumovic
Holger Hans Peter Freyther
Benjamin Keith Ford
Niklas Larsson
Alexei Gradinari