Adds the macro DTMF_MATRIX_SIZE to replace
the magic number 4 sprinkled throughout
dsp.c.
ASTERISK-29815 #close
Change-Id: Ie3bddb92c6b16204ece0f758009e9490eb33b9ba
dsp.c contains arbitrary tone detection functionality
which is currently only used for fax tone recognition.
This change makes this functionality publicly
accessible so that other modules can take advantage
of this.
Additionally, a WaitForTone and TONE_DETECT app and
function are included to allow users to do their
own tone detection operations in the dialplan.
ASTERISK-29546
Change-Id: Ie38c395000f4fd4d04e942e8658e177f8f499b26
With the new module loader it was missed that built-in modules never
parsed dependencies from mod->info into vectors of mod. This caused
manager to be initialized before acl (named_acl). If manager.conf
used any named ACL's they would not be found and result in no ACL being
applied to the AMI user.
In addition to the manager ACL fix this adds "extconfig" to all builtin
modules which support realtime configuration. This only matters if one
of the builtin modules is configured with 'preload', depending on
"extconfig" will cause config.c to automatically be initialize during
the preload stage.
Change-Id: I482ed6bca6c1064b05bb538d7861cd7a4f02d9fc
* acl (named_acl.c)
* cdr
* cel
* ccss
* dnsmgr
* dsp
* enum
* extconfig (config.c)
* features
* http
* indications
* logger
* manager
* plc
* sounds
* udptl
These modules are now loaded at appropriate time by the module loader.
Unlike loadable modules these use AST_MODULE_LOAD_FAILURE on error so
the module loader will abort startup on failure of these modules.
Some of these modules are still initialized or shutdown from outside the
module loader. logger.c is initialized very early and shutdown very
late, manager.c is initialized by the module loader but is shutdown by
the Asterisk core (too much uses it without holding references).
Change-Id: I371a9a45064f20026c492623ea8062d02a1ab97f
When built-in components of Asterisk fail to start they cause the
Asterisk startup to abort. In these cases only the most critical
cleanup should be performed - closing databases and terminating
proceses. These cleanups are registered using ast_register_atexit, all
other cleanups should not be run during startup abort.
The main reason for this change is that these cleanup procedures are
untestable from the partially initialized states, if they fail it could
prevent us from ever running the critical cleanup with ast_run_atexits.
Create separate initialization for dns_core.c to be run unconditionally
during startup instead of being initialized by the first dns resolver to
be registered. This ensures that 'sched' is initialized before it can be
potentially used.
Replace ast_register_atexit with ast_register_cleanup in media_cache.c.
There is no reason for this cleanup to happen unconditionally.
Change-Id: Iecc2df98008b21509925ff16740bd5fa29527db3
The dsp_talking_threshold does not represent time in milliseconds. It
represents the average magnitude per sample in the audio packets. This is
what the DSP uses to determine if a packet is silence or talking/noise.
Change-Id: If6f939c100eb92a5ac6c21236559018eeaf58443
ASTERISK_REGISTER_FILE no longer has any purpose so this commit removes
all traces of it.
Previously exported symbols removed:
* __ast_register_file
* __ast_unregister_file
* ast_complete_source_filename
This also removes the mtx_prof static variable that was declared when
MTX_PROFILE was enabled. This variable was only used in lock.c so it
is now initialized in that file only.
ASTERISK-26480 #close
Change-Id: I1074af07d71f9e159c48ef36631aa432c86f9966
The Goertzel calculations get less accurate the lower the signal level
being worked with becomes because there is less resolution remaining.
If it is too low we can erroneously detect a tone where none really
exists. The searched for fax frequencies not only need to be so much
stronger than the background noise they must also be a minimum strength.
* Add needed minimum threshold test to tone_detect().
* Set TONE_THRESHOLD to allow low volume frequency spread detection.
ASTERISK-26237 #close
Reported by: Richard Mudgett
Change-Id: I84dbba7f7628fa13720add6a88eae3b129e066fc
Git does not support the ability to replace a token with a version
string during check-in. While it does have support for replacing a
token on clone, this is somewhat sub-optimal: the token is replaced
with the object hash, which is not particularly easy for human
consumption. What's more, in practice, the source file version was often
not terribly useful. Generally, when triaging bugs, the overall version
of Asterisk is far more useful than an individual SVN version of a file. As a
result, this patch removes Asterisk's support for showing source file
versions.
Specifically, it does the following:
* Rename ASTERISK_FILE_VERSION macro to ASTERISK_REGISTER_FILE, and
remove passing the version in with the macro. Other facilities
than 'core show file version' make use of the file names, such as
setting a debug level only on a specific file. As such, the act of
registering source files with the Asterisk core still has use. The
macro rename now reflects the new macro purpose.
* main/asterisk:
- Refactor the file_version structure to reflect that it no longer
tracks a version field.
- Remove the "core show file version" CLI command. Without the file
version, it is no longer useful.
- Remove the ast_file_version_find function. The file version is no
longer tracked.
- Rename ast_register_file_version/ast_unregister_file_version to
ast_register_file/ast_unregister_file, respectively.
* main/manager: Remove value from the Version key of the ModuleCheck
Action. The actual key itself has not been removed, as doing so would
absolutely constitute a backwards incompatible change. However, since
the file version is no longer tracked, there is no need to attempt to
include it in the Version key.
* UPGRADE: Add notes for:
- Modification to the ModuleCheck AMI Action
- Removal of the "core show file version" CLI command
Change-Id: I6cf0ff280e1668bf4957dc21f32a5ff43444a40e
This patch adds support for automatically detecting the type of DTMF that a
PJSIP endpoint supports. When the 'dtmf_mode' endpoint option is set to 'auto',
the channel created for an endpoint will attempt to determine if RFC 4733
DTMF is supported. If so, it will use that DTMF type. If not, the DTMF type
for the channel will be set to inband.
Review: https://reviewboard.asterisk.org/r/4438
ASTERISK-24706 #close
Reported by: yaron nahum
patches:
yaron_patch_3_Feb.diff submitted by yaron nahum (License 6676)
........
Merged revisions 434637 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434638 65c4cc65-6c06-0410-ace0-fbb531ad65f3
These are fixes for compilation under gcc 5.0...
chan_sip.c: In parse_request needed to make 'lim' unsigned.
inline_api.h: Needed to add a check for '__GNUC_STDC_INLINE__' to detect C99
inline semantics (same as clang).
ccss.c: In ast_cc_set_parm, needed to fix weird comparison.
dsp.c: Needed to work around a possible compiler bug. It was throwing
an array-bounds error but neither
sgriepentrog, rmudgett nor I could figure out why.
manager.c: In action_atxfer, needed to correct an array allocation.
This patch will go to 11, 13, trunk.
Review: https://reviewboard.asterisk.org/r/4581/
Reported-by: Jeffrey Ollie
Tested-by: George Joseph
ASTERISK-24932 #close
........
Merged revisions 434113 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 434114 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434115 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Update and extend the configuration_file group and enable linking. Commit other cleanups from multi-version Doxygen testing. Update title that was left behind many years ago.
(issue ASTERISK-20259)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375182 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk's DTMF Specifications are based on AT&T specs, which may not be compatible in other countries.
Various countries have different specifications for the maximum power level differences
between the DTMF low group and high group of frequencies.
Power level difference between frequencies for different Administrations/RPOAs
NTT = Max. 5 dB
AT&T = 4dB(reverse) to 8dB(normal)
Danish = Max. 6 dB
Australian = Max. 10 dB
Brazilian = Max. 9 dB
ETSI = Max. 6 dB from ETSI ES 201 235-3 V1.3.1 (2006-03)
Now allow 4 variables to be individually configured in dsp.conf, with reasonable min/max of 2dB to 20dB.
Default is AT&T specifications
Add's the following variables to dsp.conf
;dtmf_normal_twist=6.31
;dtmf_reverse_twist=2.51
;relax_dtmf_normal_twist=6.31
;relax_dtmf_reverse_twist=3.98
(closes issue ASTERISK-20442)
Reported by: tbsky
Tested by: tbsky,alecdavis
alecdavis (license 585)
Review https://reviewboard.asterisk.org/r/2141/
........
Merged revisions 374384 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 374385 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 374386 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@374387 65c4cc65-6c06-0410-ace0-fbb531ad65f3
janitor cleanup. No functional change.
1). ast_dsp_call_progress: use 'short samp' instead of s[x] inside loop.
apply same casting as other _init, dsp->energy = (int32_t) samp * (int32_t) samp
2). ast_dtmf_detect_init: move repeated setting of s->energy to outside of loop.
do goertzel_init loop first before setting s->lasthit and s->current_hit, consistant with ast_dsp_digitreset()
3). ast_mf_detect_init:
do goertzel_init loop first before setting s->hits[] and s->current_hit, consistant with ast_dsp_digitreset()
4). Don't chain init different variables, as the type may change
Review https://reviewboard.asterisk.org/r/2107/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373275 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r369001 | kpfleming | 2012-06-15 10:56:08 -0500 (Fri, 15 Jun 2012) | 11 lines
Add support-level indications to many more source files.
Since we now have tools that scan through the source tree looking for files
with specific support levels, we need to ensure that every file that is
a component of a 'core' or 'extended' module (or the main Asterisk binary)
is explicitly marked with its support level. This patch adds support-level
indications to many more source files in tree, but avoids adding them to
third-party libraries that are included in the tree and to source files
that don't end up involved in Asterisk itself.
........
r369002 | kpfleming | 2012-06-15 10:57:14 -0500 (Fri, 15 Jun 2012) | 3 lines
Add a script to enable finding source files without support-levels defined.
........
Merged revisions 369001-369002 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 369005 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369013 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Everything still compiled after making these changes, so I assume these
whitespace-only changes didn't break anything (and shouldn't have).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@360190 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There are many benefits to making the ast_channel an opaque handle, from
increasing maintainability to presenting ways to kill masquerades. This patch
kicks things off by taking things a field at a time, renaming the field to
'__do_not_use_${fieldname}' and then writing setters/getters and converting the
existing code to using them. When all fields are done, we can move ast_channel
to a C file from channel.h and lop off the '__do_not_use_'.
This patch sets up main/channel_interal_api.c to be the only file that actually
accesses the ast_channel's fields directly. The intent would be for any API
functions in channel.c to use the accessor functions. No more monkeying around
with channel internals. We should use our own APIs.
The interesting changes in this patch are the addition of
channel_internal_api.c, the moving of the AST_DATA stuff from channel.c to
channel_internal_api.c (note: the AST_DATA stuff will have to be reworked to
use accessor functions when ast_channel is really opaque), and some re-working
of the way channel iterators/callbacks are handled so as to avoid creating fake
ast_channels on the stack to pass in matching data by directly accessing fields
(since "name" is a stringfield and the fake channel doesn't init the
stringfields, you can't use the ast_channel_name_set() function). I went with
ast_channel_name(chan) for a getter, and ast_channel_name_set(chan, name) for a
setter.
The majority of the grunt-work for this change was done by writing a semantic
patch using Coccinelle ( http://coccinelle.lip6.fr/ ).
Review: https://reviewboard.asterisk.org/r/1655/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@350223 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When receiving calls from a mobile phone into a DISA system on a connection with
significant interference, the reporter's Asterisk system would interpret DTMF incorrectly
and replicate digits received. This patch resolves that by increasing the number of
frames a mismatch has to be detected before assuming the DTMF is over by 1 frame and
adjusts dtmf_detect function to reset hits and misses only when an edge is detected.
(closes issue ASTERISK-17493)
Reported by: Alec Davis
Patches:
bug18904-refactor.diff.txt uploaded by Alec Davis (license 5546)
Review: https://reviewboard.asterisk.org/r/1130/
........
Merged revisions 349728 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 349729 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@349730 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit removes the V.21 preamble detection code previously added to the
generic DSP implementation in Asterisk, and instead enhances the res_fax module
to be able to utilize V.21 preamble detection functionality made available by
FAX technology modules. This commit also adds such support to res_fax_spandsp,
which uses the Spandsp modem tone detection code to do the V.21 preamble
detection.
There should be no functional change here, other than much more reliable V.21
preamble detection (and thus T.38 gateway initiation).
........
Merged revisions 349248 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@349249 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In chan_dahdi.conf, the user can now use length 4 patterns in addition to the usual length 2 patterns. The s
ntax remains the same and the method used to track the pattern history will only change when using the length
4 patterns.
(closes issue SWP-3250)
Code:
jrose
rmudgett
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@312384 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is the foundation of an entire new way of looking at media in Asterisk.
The code present in this patch is everything required to complete phase1 of my
Media Architecture proposal. For more information about this project visit the link below.
https://wiki.asterisk.org/wiki/display/AST/Media+Architecture+Proposal
The primary function of this patch is to convert all the usages of format
bitfields in Asterisk to use the new format and format_cap APIs. Functionally
no change in behavior should be present in this patch. Thanks to twilson
and russell for all the time they spent reviewing these changes.
Review: https://reviewboard.asterisk.org/r/1083/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306010 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Naveen Albert
Josh Soref
Sean Bright
Corey Farrell
Richard Mudgett
Matt Jordan
George Joseph
Kinsey Moore
Andrew Latham
Alec L Davis
Kevin P. Fleming
Terry Wilson
Jonathan Rose
Matthew Nicholson
Paul Belanger
Gregory Nietsky
David Vossel
Russell Bryant