Move the call to ast_sip_location_prune_boot_contacts() *after* the call
to ast_res_pjsip_init_options_handling() so that
res/res_pjsip/pjsip_options.c is informed about the contact deletion and
updates its sip_options_contact_statuses list. This allows for an AMI
event to be sent by res/res_pjsip/pjsip_options.c if the endpoint
registers again from the same remote address and port (i.e., same URI)
as used before the Asterisk restart.
ASTERISK-30109
Reported-by: Michael Neuhauser
Change-Id: I1ba4478019e4931a7085f62708d9b66837e901a8
There are several things wrong with analog Caller ID
handling that are fixed by this commit:
callerid.c's Caller ID generation function contains the
logic to use the presentation to properly send the proper
Caller ID. However, currently, DAHDI does not pass any
presentation information to the Caller ID module, which
means that presentation is completely ignored on all calls.
This means that lines could be getting Caller ID information
they aren't supposed to.
Part of the reason this has been obscured is because the
simple switch logic for handling the built in *67 and *82
is completely wrong. Rather than modifying the presentation
for the call accordingly (which is what it's supposed to do),
it simply blanks out the Caller ID or fills it in. This is
wrong, so wrong that it makes a mockery of the specification.
Additionally, it would leave to the "UNAVAILABLE" disposition
being used for Caller ID generation as opposed to the "PRIVATE"
disposition that it should have been using. This is now fixed
to only update the presentation and not modify the number and
name, so that the simple switch *67/*82 work correctly.
Next, sig_analog currently only copies over the name and number,
nothing else, when it is filling in a duplicated caller id
structure. Thus, we also now copy over the presentation
information so that is available for the Caller ID spill.
Additionally, this meant that "valid" was implicitly 0,
and as such presentation would always fail to "Unavailable".
The validity is therefore also copied over so it can be used
by ast_party_id_presentation.
As part of this fix, new API is added so that all the relevant
Caller ID information can be passed in to the Caller ID generation
functions. Parameters that are also completely missing from the
Caller ID spill have also been added, to enhance the compatibility,
correctness, and completeness of the Asterisk Caller ID implementation.
ASTERISK-29991 #close
Change-Id: Icc44a5e09979916f4c18a440f96e10dc1c76ae15
Adds a POLARITY function which can be used to
retrieve the current polarity of an FXS channel
as well as set the polarity of an FXS channel
to idle or reverse at any point during a call.
ASTERISK-30000 #close
Change-Id: If6f50998f723e4484bf68e2473f5cedfeaf9b8f1
make_version now silently checks if the required git commands will
fail. If they do, then return UNKNOWN__git_check_fail to
distinguish this failure from other UNKNOWN__ version failures
Makefile checks for this value on install and exits out with
instructions
ASTERISK-30029
Change-Id: If8f10cac8f509c08981120f17555762342020221
Currently, if multiple video-enabled ConfBridges are
conferenced together, we immediately get into a scenario
where an infinite sequence of video updates fills up
the taskprocessor queue and causes memory consumption
to climb unabated until Asterisk is killed. This is due
to the core bridging mechanism that provides video updates
(softmix_bridge_write_control in bridge_softmix.c)
continously updating all the channels in the bridge with
video updates.
The logic to do so in the core is that the video updates
should be provided if the video_update_discard property
for the bridge is 0, or if enough time has elapsed since
the last video update. Thus, we already have a safeguard
built in to ensure the scenario described above does not
happen. Currently, however, this safeguard is not being
adequately ensured.
In app_confbridge, the video_update_discard property
defaults to 2000, which is a healthy value that should
completely prevent this issue. However, this value is
only set onto the bridge in the SFU video mode. This
leaves video modes such as follow_talker completely
vulnerable, since video_update_discard will actually
be 0, since the default or set value was never applied.
As a result, the core bridging mechanism will always
try to provide video updates regardless of when the last
one was sent.
To prevent this issue from happening, we now always
set the video_update_discard property on the bridge
with the value from the bridge profile. The app_confbridge
defaults will thus ensure that infinite video updates
no longer happen in any video mode.
ASTERISK-29907 #close
Change-Id: I4accb2536ac62797950468e9930f12ef7dd486b2
Allocate all of the ast_context's character data in the structure's
flexible array member and eliminate the clunky fake_context. This will
simplify future changes to ast_context.
Change-Id: I98357de75d8ac2b3c4c9f201223632e6901021ea
line 196: loc_src = '\0';
should have been
line 196: *loc_src = '\0';
The issue was caught by the gcc optimizer complaining that
loc_src had a zero length because the pointer itself was being
set to NULL instead of the _contents_ of the pointer being set
to the NULL terminator.
ASTERISK-30138
Reported-by: Sean Bright
Change-Id: Id247be113cc8510f043ca053d5b4f5f3d32acd29
This commit adds res_pjsip_geolocation which gives chan_pjsip
the ability to use the core geolocation capabilities.
This commit message is intentionally short because this isn't
a simple capability. See the documentation at
https://wiki.asterisk.org/wiki/display/AST/Geolocation
for more information.
THE CAPABILITIES IMPLEMENTED HERE MAY CHANGE BASED ON
USER FEEDBACK!
ASTERISK-30128
Change-Id: Ie2e2bcd87243c2cfabc43eb823d4427c7086f4d9
This commit adds res_geolocation which creates the core capabilities
to manipulate Geolocation information on SIP INVITEs.
An upcoming commit will add res_pjsip_geolocation which will
allow the capabilities to be used with the pjsip channel driver.
This commit message is intentionally short because this isn't
a simple capability. See the documentation at
https://wiki.asterisk.org/wiki/display/AST/Geolocation
for more information.
THE CAPABILITIES IMPLEMENTED HERE MAY CHANGE BASED ON
USER FEEDBACK!
ASTERISK-30127
Change-Id: Ibfde963121b1ecf57fd98ee7060c4f0808416303
ASTERISK_30007 accidentally made OpenSSL a
required depdendency. This adds an ifdef so
the relevant code is compiled only if OpenSSL
is available, since it only needs to be executed
if OpenSSL is available anyways.
ASTERISK-30083 #close
Change-Id: Iad05c1a9a8bd2a48e7edf8d234eaa9f80779e34d
A sporadic test failure was happening when executing the AEAP
Websocket transport tests. It was originally thought this was
due to things not getting cleaned up fast enough, but upon further
investigation I determined the underlying cause was poll()
getting interrupted and this not being handled in all places.
This change adds EINTR and EAGAIN handling to the Websocket
client connect code as well as the AEAP Websocket transport code.
If either occur then the code will just go back to waiting
for data.
The originally disabled failure test case has also been
re-enabled.
ASTERISK-30099
Change-Id: I1711a331ecf5d35cd542911dc6aaa9acf1e172ad
Adds a CLI command similar to "dialplan eval function" except for
applications: "dialplan exec application", useful for quickly
testing certain application behavior directly from the CLI
without writing any dialplan.
ASTERISK-30062 #close
Change-Id: I42e9fa9b60746c21450d40f99a026d48d2486dde
The current documentation is out of date and does not reflect actual
behaviour. This change makes documentation clearer and accurately
reflect the purpose of relevant channel variables.
ASTERISK-30123
Change-Id: I160d0b01fce862477ad55ac1aa708a730473eb6f
* Added ast_variable_list_from_quoted_string()
Parse a quoted string into an ast_variable list.
* Added ast_str_substitute_variables_full2()
Perform variable/function/expression substitution on an ast_str.
* Added ast_strsep_quoted()
Like ast_strsep except you can specify a specific quote character.
Also added unit test.
* Added ast_xml_find_child_element()
Find a direct child element by name.
* Added ast_xml_doc_dump_memory()
Dump the specified document to a buffer
* ast_datastore_free() now checks for a NULL datastore
before attempting to destroy it.
Change-Id: I5dcefed2f5f93a109e8b489e18d80d42e45244ec
These new functions allow retrieving information from headers on 200 OK
INVITE response.
ASTERISK-29999
Change-Id: I264a610a9333359297a0825feb29a1bb4f4ad144
Switched res_pjsip_outbound_registration.so dep to optional. Added
module loaded check before using it.
ASTERISK-30101 #close
Change-Id: Ia34f1684d984e821fbdd4de8911f930337703666
ASTERISK_28638 caused a regression by incorrectly aborting
early and overwriting the status on certain calls.
This was exhibited by certain technologies such as DAHDI,
where DAHDI returns NULL for the request if a line is busy.
This caused the BUSY condition to be incorrectly treated
as CHANUNAVAIL because the DIALSTATUS was getting incorrectly
overwritten and call handling was aborted early.
This is fixed by instead checking if any valid peers have been
specified, as opposed to checking the list size of successful
requests. This is because the latter could be empty but this
does not indicate any kind of problem. This restores the
previous working behavior.
ASTERISK-29989 #close
Change-Id: I4d4b209b967816b1bc791534593ababa2b99bb88
Currently, if using the CLI to delete a DB entry,
"Database entry removed" is always returned,
regardless of whether or not the entry actually
existed in the first place. This meant that users
were never told if entries did not exist.
The same issue occurs if trying to delete a DB key
using AMI.
To address this, new API is added that is more stringent
in deleting values from AstDB, which will not return
success if the value did not exist in the first place,
and will print out specific error details if available.
ASTERISK-30001 #close
Change-Id: Ic84e3eddcd66c7a6ed7fea91cdfd402568378b18
A corner case exists in CLI parsing where if
a CLI user in a remote console ends with
a backslash and then invokes command completion
(using TAB or ?), then the console will freeze
forever until a SIGQUIT signal is sent to the
process, due to getting blocked forever
reading the command completion. CTRL+C
and other key combinations have no impact on
the CLI session.
This occurs because, in such cases, the CLI
process is waiting for AST_CLI_COMPLETE_EOF
to appear in the buffer from the main process,
but instead the main process is confused by
the funny syntax and thus prints out the CLI help.
As a result, the CLI process is stuck on the
read call, waiting for the completion that
will never come.
This prevents blocking forever by checking
if the data from the main process starts with
"Usage:". If it does, that means that CLI help
was sent instead of the tab complete vector,
and thus the CLI should bail out and not wait
any longer.
ASTERISK-29822 #close
Change-Id: I9810ac59304fec162da701653c9c834f0ec8f670
The Dial application currently stops hook flashes
dead in their tracks from propagating through on
outbound calls. This fixes that so they can go
down the wire.
ASTERISK-30115 #close
Change-Id: Id4e78b29a049f35c5b1e7520eaa10d0eb5b7f97c
Microsoft recently began rejecting all requests for
ICS calendars on Office 365 with 400 errors if
the request doesn't contain a user agent. See:
https://docs.microsoft.com/en-us/answers/questions/883904/34the-remote-server-returned-an-error-400-bad-requ.html
Accordingly, we now send a user agent on requests for
ICS files so that requests to Office 365 will work as
they did before.
ASTERISK-30106
Change-Id: Ie9dcaef12ae8adf37533c684499eb11005fac8f7
If the caller has hung up, break out of the play loop so we don't try
to play remaining files and fail to do so.
ASTERISK-30075 #close
Change-Id: I55e85be28ee90b48c0fe4ce20ac136a7dbb49f14
Rightly the use of wildcards in certificates is disallowed in accordance
with RFC5922. However, RFC2818 does make some allowances with regards to
their use when using subject alt names with DNS name types.
As such this patch creates a new setting for TLS transports called
'allow_wildcard_certs', which when it and 'verify_server' are both enabled
allows DNS name types, as well as the common name that start with '*.'
to match as a wildcard.
For instance: *.example.com
will match for: foo.example.com
Partial matching is not allowed, e.g. f*.example.com, foo.*.com, etc...
And the starting wildcard only matches for a single level.
For instance: *.example.com
will NOT match for: foo.bar.example.com
The new setting is disabled by default.
ASTERISK-30072 #close
Change-Id: If0be3fdab2e09c2a66bb54824fca406ebaac3da4
Finding an application and executing it if found is
a common task throughout Asterisk. This adds a helper
function around pbx_exec to do this, to eliminate
redundant code and make it easier for modules to
substitute variables and execute applications by name.
ASTERISK-30061 #close
Change-Id: Ifee4d2825df7545fb515d763d393065675140c84
A previous review fixing ASTERISK_22246 and ASTERISK_26582
got a couple of the options mixed up as to whether or not
they are compatible with the remote console. This fixes
those to the best of my knowledge.
ASTERISK-30097 #close
Change-Id: Id54166991aa79f04fb02699cc499bedda854253b
The 'transport_binary' test sporadically fails, but on a theory that the
problem is caused by a previously executed test, transport_connect_fail,
part of that test has been disabled until a solution is found.
ASTERISK_30099
Change-Id: I48ed74d696aa9b6159f59661f3d535cac4c909e1
Three-way calling for analog lines is currently broken.
If party A is on a call with party B and initiates a
three-way call to party C, the behavior differs depending
on whether the call is conferenced prior to party C
answering. The post-answer case is correct. However,
if A flashes before C answers, then the next flash
disconnects B rather than C, which is incorrect.
This error occurs because the subs are not swapped
in the misbehaving case. This is because the flash
handler only swaps the subs if C has answered already,
which is wrong. To fix this, we swap the subs regardless
of whether C has answered or not when the call is
conferenced. This ensures that C is disconnected
on the next hook flash, rather than B as can happen
currently.
ASTERISK-30043 #close
Change-Id: I96c5bf6c9b7eb2636136b716c677c82c079b6f06
Adds an option to VoiceMailMain that prevents the user
from deleting messages during that application invocation.
This can be useful for public or shared mailboxes, where
some users should be able to listen to messages but not
delete them.
ASTERISK-30063 #close
Change-Id: Icdfb8423ae8d1fce65a056b603eb84a672e80a26
An m option to Park and ParkAndAnnounce now allows
specifying a music on hold class override.
ASTERISK-30087
Change-Id: I03de8d97b100e451b2611b5a621d48750f5d6a9e
Currently, PJSIP will randomly wait up to 10 seconds for each
outbound registration's initial attempt. The reason for this
is to avoid having all outbound registrations attempt to register
simultaneously.
This can create limitations with the test suite where we need to
be able to receive inbound calls potentially within 10 seconds of
starting up. For instance, we might register to another server
and then try to receive a call through the registration, but if
the registration hasn't happened yet, this will fail, and hence
this inconsistent behavior can cause tests to fail. Ultimately,
this requires a smaller random value because there may be no good
reason to wait for up to 10 seconds in these circumstances.
To address this, a new config option is introduced which makes this
maximum delay configurable. This allows, for instance, this to be
set to a very small value in test systems to ensure that registrations
happen immediately without an unnecessary delay, and can be used more
generally to control how "tight" the initial outbound registrations
are.
ASTERISK-29965 #close
Change-Id: Iab989a8e94323e645f3a21cbb6082287c7b2f3fd
When a pjsip endpoint is defined with timers=always, this has been a
functional noop. This patch correctly sets the feature bitmap to both
enable support for session timers and to enable them even when the
endpoint itself does not request or support timers.
ASTERISK-29603
Reported-By: Ray Crumrine
Change-Id: I8b5eeaa9ec7f50cc6d96dd34c2b4aa9c53fb5440
If there is scheduled notification, we must delete it
to avoid using destroyed subscriptions.
ASTERISK-29906
Change-Id: I1c644e5e15a8fe43eed8e4f9112f113cbf87a40f
In function ast_say_date_with_format_de(), take special
care when the hour is one o'clock. In this case, the
German number "eins" must be inflected to its neutrum form,
"ein". This is achieved by playing "digits/1N" instead of
"digits/1". Fixes both 12- and 24-hour formats.
ASTERISK-30092
Change-Id: Ica9b80125c0b317e378d89c1ea786816e2635510
If a switch is invoked using chan_iax2, deadlock can result
because the PBX core is autoservicing the channel while chan_iax2
also then attempts to service it while waiting for the result
of the switch. This removes servicing of the channel to prevent
any conflicts.
ASTERISK-30064 #close
Change-Id: Ie92f206d32f9a36924af734ddde652b21106af22
If tab completion using ast_module_helper is attempted
during startup, deadlock will ensue because the CLI
will attempt to lock the module list while it is already
locked by the loader. This causes deadlock because when
the loader tries to acquire the CLI lock, they are blocked
on each other.
Waiting for startup to complete is not feasible because
the CLI lock is acquired while waiting, so deadlock will
ensure regardless of whether or not a lock on the module
list is attempted.
To prevent deadlock, we immediately abort if tab completion
is attempted on the module list before Asterisk is fully
booted.
ASTERISK-30039 #close
Change-Id: Idd468906c512bb196631e366a8f597a0e2e9271d
res_calendar will trigger an assertion currently
if the ending time is calculated to be in the past.
Unlike the reminder and start times, however, there
is currently no check to catch non-positive times
and set them to 1. As a result, if we get a negative
value by happenstance, this can cause a crash.
To prevent the assertion from begin triggered, we now
use the same logic as the reminder and start events
to catch this issue before it can cause a problem.
ASTERISK-29981 #close
Change-Id: Idfb3204d195f350d2575fb4bc72a54a597d6e93c
Emits a warning if the user has requested a parking spot that
is out of bounds for the requested parking lot.
ASTERISK-30086
Change-Id: I1080371e4f63e94724455003753014fbd3f95fbf
When a PJSIP channel is set on hold or off hold, all streams were set
on/off hold. This is not the desired behaviour and caused issues
when there were multiple streams in the topology.
Now, only the default audio stream is set on/off hold when a hold is
indicated.
ASTERISK-30051
Change-Id: I04f1110565fd05fea565f5539b534b54549d4f71
The change "Add LOCAL/REMOTE tags in dialog-info+xml" set both "local"
Identity Element URI and Target Element URI to the same value -
the channel Caller Number.
For Identity Element it's ok to set as Caller ID.
But Local Target URI should be set as local URI.
In this case the Local Target URI can be used for Directed Call Pickup
by Polycom ip-phones (parameter useLocalTargetUriforLegacyPickup).
Also XML sanitized Display names.
ASTERISK-24601
Change-Id: If130a2f2f3b2339b14dca0ec0ebeea3a87b34343
Agi commnad exec can now evaluate dialplan functions and
variables if variable AGIEXECFULL is set to yes. this can
be useful when executing Playback or Read from agi.
ASTERISK-30058 #close
Change-Id: I669991f540496e7bddd096fec82b52c083036832
This change exposes the channel driver's unique id (i.e. the Call-ID
for chan_sip/chan_pjsip based channels) to ARI channel resources
as `protocol_id`.
ASTERISK-30027
Reported by: Moritz Fain
Tested by: Moritz Fain
Change-Id: I7cc6e7a9d29efe74bc27811d788dac20fe559b87
Asterisk Development Team
Michael Neuhauser
Naveen Albert
Sam Banks
Mike Bradeen
Sean Bright
George Joseph
Kevin Harwell
Joshua C. Colp
Trevor Peirce
Boris P. Korzun
Jose Lopes
Stanislav Abramenkov
Alexei Gradinari
Christof Efkemann
Maximilian Fridrich
Shloime Rosenblum
Moritz Fain