Previously, I had added the ast_sched_thread stuff that was a generic scheduler
thread implementation. However, if you used it, it required using different
functions for modifying scheduler contents. This patch reworks how this is
done and just allows you to optionally start a thread on the original scheduler
context structure that has always been there. This makes it trivial to switch
to the generic scheduler thread implementation without having to touch any of
the other code that adds or removes scheduler entries.
In passing, I made some naming tweaks to add ast_ prefixes where they were not
there before.
Review: https://reviewboard.asterisk.org/r/1007/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@299091 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r298960 | tilghman | 2010-12-17 17:52:04 -0600 (Fri, 17 Dec 2010) | 20 lines
Merged revisions 298957 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r298957 | tilghman | 2010-12-17 17:30:55 -0600 (Fri, 17 Dec 2010) | 13 lines
Merged revisions 298905 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r298905 | tilghman | 2010-12-17 15:40:56 -0600 (Fri, 17 Dec 2010) | 6 lines
Let Asterisk find better backtrace information with libbfd.
The menuselect option BETTER_BACKTRACES, if enabled, will use libbfd to search
for better symbol information within both the Asterisk binary, as well as
loaded modules, to assist when using inline backtraces to track down problems.
Review: https://reviewboard.asterisk.org/r/1055/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@298961 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Already had the pthread ID which is not the same. The most obvious enhancement
is in the "core show threads" output. As stated in the utils header, if the
platform isn't supported -1 is reported (instead of the process ID previously).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@298137 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r297157 | mnicholson | 2010-12-01 13:47:33 -0600 (Wed, 01 Dec 2010) | 2 lines
Changed some NOTICE and WARNING messages to DEBUG messages.
........
r297486 | mnicholson | 2010-12-02 15:30:47 -0600 (Thu, 02 Dec 2010) | 6 lines
Add support for reserving a fax session before answering the channel.
Note: this change breaks ABI compatibility.
FAX-217
........
r297495 | mnicholson | 2010-12-03 09:21:52 -0600 (Fri, 03 Dec 2010) | 4 lines
Print a DEBUG message instead of a WARNING message when the selected fax tech does not support reserving sessions.
Answer the channel before quering it for t.38 support. This is necessary for the query to work properly over local channels.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@297496 65c4cc65-6c06-0410-ace0-fbb531ad65f3
by splitting up devices from hints into an own ao2_container the callback to
get these devices for statechange handling is faster.
with this changes the length of a device used in a hint isnt longer restricted
to 80 characters.
Tests showed that calling handle_statechange is 40 times faster if no hints
are used and 25 times faster if there are any hints.
(closes issue #17928)
Reported by: mdu113
Tested by: schmidts
Review: https://reviewboard.asterisk.org/r/1003/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@296752 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r296534 | tilghman | 2010-11-29 01:28:44 -0600 (Mon, 29 Nov 2010) | 20 lines
Merged revisions 296533 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r296533 | tilghman | 2010-11-29 01:27:09 -0600 (Mon, 29 Nov 2010) | 13 lines
I love standards. There are so many to choose from. Except when there isn't one.
Linux and *BSD disagree on the elements within the ucred structure. Detect
which one is in use on the system.
(closes issue #18384)
Reported by: bjm
Patches:
cred-diffs uploaded by bjm (license 473)
20101127__issue18384__1.6.2.diff.txt uploaded by tilghman (license 14)
20101127__issue18384__1.8.diff.txt uploaded by tilghman (license 14)
Tested by: tilghman, bjm
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@296535 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r295866 | rmudgett | 2010-11-22 13:36:10 -0600 (Mon, 22 Nov 2010) | 60 lines
Merged revisions 295843 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r295843 | rmudgett | 2010-11-22 13:28:23 -0600 (Mon, 22 Nov 2010) | 53 lines
Merged revisions 295790 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r295790 | rmudgett | 2010-11-22 12:46:26 -0600 (Mon, 22 Nov 2010) | 46 lines
The channel redirect function (CLI or AMI) hangs up the call instead of redirecting the call.
To recreate the problem:
1) Party A calls Party B
2) Invoke CLI "channel redirect" command to redirect channel call leg
associated with A.
3) All associated channels are hung up.
Note that if the CLI command were done on the channel call leg associated
with B it works.
This regression was a result of the fix for issue #16946
(https://reviewboard.asterisk.org/r/740/).
The regression affects all features that use an async goto to execute the
dialplan because of an external event: Channel redirect, AMI redirect, SIP
REFER, and FAX detection.
The struct ast_channel._softhangup code is a mess. The variable is used
for several purposes that do not necessarily result in the call being hung
up. I have added doxygen comments to describe how the various _softhangup
bits are used. I have corrected all the places where the variable was
tested in a non-bit oriented manner.
The primary fix is the new AST_CONTROL_END_OF_Q frame. It acts as a weak
hangup request so the soft hangup requests that do not normally result in
a hangup do not hangup.
JIRA SWP-2470
JIRA SWP-2489
(closes issue #18171)
Reported by: SantaFox
(closes issue #18185)
Reported by: kwemheuer
(closes issue #18211)
Reported by: zahir_koradia
(closes issue #18230)
Reported by: vmarrone
(closes issue #18299)
Reported by: mbrevda
(closes issue #18322)
Reported by: nerbos
Review: https://reviewboard.asterisk.org/r/1013/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@295867 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r295711 | russell | 2010-11-19 18:50:00 -0600 (Fri, 19 Nov 2010) | 36 lines
Merged revisions 295710 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r295710 | russell | 2010-11-19 18:45:51 -0600 (Fri, 19 Nov 2010) | 29 lines
Fix cache of device state changes for multiple servers.
This patch addresses a regression where device states across multiple servers
were not being processing completely correctly. The code works to determine
the overall state by looking at the last known state of a device on each
server. However, there was a regression due to some invasive rewrites of how
the cache works that led to the cache only storing the last device state change
for a device, regardless of which server it was on.
The code is set up to cache device state change events by ensuring that each
event in the cache has a unique device name + entity ID (server ID). The code
that was responsible for comparing raw information elements (which EID is)
always returned a match due to a memcmp() with a length of 0.
There isn't much code to fix the actual bug. This patch also introduces a new
CLI command that was very useful for debugging this problem. The command
allows you to dump the contents of the event cache.
(closes issue #18284)
Reported by: klaus3000
Patches:
issue18284.rev1.txt uploaded by russell (license 2)
Tested by: russell, klaus3000
(closes issue #18280)
Reported by: klaus3000
Review: https://reviewboard.asterisk.org/r/1012/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@295712 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r294349 | rmudgett | 2010-11-09 10:55:32 -0600 (Tue, 09 Nov 2010) | 17 lines
Analog lines do not transfer CONNECTED LINE or execute the interception macros.
Add connected line update for sig_analog transfers and simplify the
corresponding sig_pri and chan_misdn transfer code.
Note that if you create a three-way call in sig_analog before transferring
the call, the distinction of the caller/callee interception macros make
little sense. The interception macro writer needs to be prepared for
either caller/callee macro to be executed. The current implementation
swaps which caller/callee interception macro is executed after a three-way
call is created.
Review: https://reviewboard.asterisk.org/r/996/
JIRA ABE-2589
JIRA SWP-2372
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@294351 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r294278 | jpeeler | 2010-11-08 15:59:45 -0600 (Mon, 08 Nov 2010) | 23 lines
Merged revisions 294277 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r294277 | jpeeler | 2010-11-08 15:58:13 -0600 (Mon, 08 Nov 2010) | 16 lines
Fix playback failure when using IAX with the timerfd module.
To fix this issue the alert pipe will now be used when the timerfd module is
in use. There appeared to be a race that was not solved by adding locking in the
timerfd module, but needed to be there anyway. The race was between the timer
being put in non-continuous mode in ast_read on the channel thread and the IAX
frame scheduler queuing a frame which would enable continuous mode before the
non-continuous mode event was read. This race for now is simply avoided.
(closes issue #18110)
Reported by: tpanton
Tested by: tpanton
I put tested by tpanton because it was tested on his hardware. Thanks for the
remote access to debug this issue!
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@294279 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r293803 | twilson | 2010-11-03 11:05:14 -0700 (Wed, 03 Nov 2010) | 25 lines
Avoid valgrind warnings for ast_rtp_instance_get_xxx_address
The documentation for ast_rtp_instance_get_(local/remote)_address stated that
they returned 0 for success and -1 on failure. Instead, they returned 0 if the
address structure passed in was already equivalent to the address instance
local/remote address or 1 otherwise. 90% of the calls to these functions
completely ignored the return address and passed in an uninitialized struct,
which would make valgrind complain even though the operation was technically
safe.
This patch fixes the documentation and converts the get_xxx_address functions
to void since all they really do is copy the address and cannot fail.
Additionally two new functions
(ast_rtp_instance_get_and_cmp_(local/remote)_address) are created for the 3
times where the return value was actually checked. The
get_and_cmp_local_address function is currently unused, but exists for the sake
of symmetry.
The only functional change as a result of this change is that we will not do an
ast_sockaddr_cmp() on (mostly uninitialized) addresses before doing the
ast_sockaddr_copy() in the get_*_address functions. So, even though it is an
API change, it shouldn't have a noticeable change in behavior.
Review: https://reviewboard.asterisk.org/r/995/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@293809 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r291758 | pabelanger | 2010-10-14 11:15:12 -0400 (Thu, 14 Oct 2010) | 11 lines
Add the ability for ast_find_ourip to return IPv4, IPv6 or both.
While testing chan_gtalk I noticed jabber was using my IPv6 address
and not IPv4. When using bindaddr=0.0.0.0 it is possible for ast_find_ourip()
to return both IPv6 and IPv4 results. Adding a family parameter gives you
the ablility to choose.
Since jabber/gtalk/h323 do not support IPv6, we should only return IPv4 results.
Review: https://reviewboard.asterisk.org/r/973/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@291760 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r291192 | dvossel | 2010-10-11 16:38:39 -0500 (Mon, 11 Oct 2010) | 19 lines
Gtalk enhancements and general code cleanup.
This patch includes several chan_gtalk enhancements.
Two new gtalk.conf options have been added, externip
and stunadd. Setting externip allows us to
manually specify what the external IP address is
outside of a NAT environment. Setting the stunaddr
option to a valid stun server allows for that external
ip to be retrieved via a STUN server automatically. This
external IP is then advertised during call setup as
a possible candidate.
I have also attempted to clean up chan_gtalk's code
so it meets our coding guidelines. During this cleanup
I noticed several things that need to be done in the
code and made a TODO section at the top of the file.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@291193 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r289840 | jpeeler | 2010-10-01 21:43:45 -0500 (Fri, 01 Oct 2010) | 29 lines
Merged revisions 289798 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r289798 | jpeeler | 2010-10-01 18:01:31 -0500 (Fri, 01 Oct 2010) | 22 lines
Merged revisions 289797 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r289797 | jpeeler | 2010-10-01 17:58:38 -0500 (Fri, 01 Oct 2010) | 15 lines
Change RFC2833 DTMF event duration on end to report actual elapsed time.
The scenario here is with a non P2P early media session. The reported time
length of DTMF presses are coming up short when sending to the remote side.
Currently the event duration is a running total that is incremented when sending
continuation packets. These continuation packets are only triggered upon
incoming media from the remote side, which means that the running total probably
is not going to end up matching the actual length of time Asterisk received
DTMF. This patch changes the end event duration to be lengthened if it is
detected that the end event is going to come up short.
Review: https://reviewboard.asterisk.org/r/957/
ABE-2476
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@289841 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r287647 | dvossel | 2010-09-20 17:09:16 -0500 (Mon, 20 Sep 2010) | 21 lines
Addition of the FrameHook API (AKA AwesomeHooks)
So far all our tools for viewing and manipulating media streams
within Asterisk have been entirely focused on audio. That made
sense then, but is not scalable now. The FrameHook API lets us
tap into and manipulate _ANY_ type of media or signaling passed
on a channel present today or in the future. This tool is a step
in the direction of expanding Asterisk's boundaries and will help
generate some rather interesting applications in the future.
In addition to the FrameHook API, a simple dialplan function
exercising the api has been included as well. This function
is called FRAME_TRACE(). FRAME_TRACE() allows for the internal
ast_frames read and written to a channel to be output. Filters
can be placed on this function to debug only certain types of frames.
This function could be thought of as an internal way of doing
ast_frame packet captures.
Review: https://reviewboard.asterisk.org/r/925/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@287648 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r286931 | jpeeler | 2010-09-15 14:22:15 -0500 (Wed, 15 Sep 2010) | 16 lines
Add parking extension for non-default parking lots.
This is a new feature that allows for parking to custom parking lots to be
accessed directly, rather than with channel variables or by changing the
default parking lot. The extension is set with the parkext option just as the
default parking lot is done. Also, the manager action has been updated to
optionally allow a specified parking lot.
(closes issue #14882)
Reported by: vmikhnevych
Patches:
patch_14882.txt uploaded by mnick (license 874)
modified by me
Review: https://reviewboard.asterisk.org/r/884/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@286939 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r286189 | twilson | 2010-09-10 17:04:53 -0500 (Fri, 10 Sep 2010) | 30 lines
Merged revisions 286115 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r286115 | twilson | 2010-09-10 15:35:25 -0500 (Fri, 10 Sep 2010) | 23 lines
Merged revisions 286059 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r286059 | twilson | 2010-09-10 14:25:08 -0500 (Fri, 10 Sep 2010) | 16 lines
Inherit CHANNEL() writes to both sides of a Local channel
Having Local (/n) channels as queue members and setting the language in the
extension with Set(CHANNEL(language)=fr) sets the language on the Local/...,2
channel. Hold time report playbacks happen on the Local/...,1 channel and
therefor do not play in the specified language.
This patch modifies func_channel_write to call the setoption callback and pass
the CHANNEL() write info to the callback. chan_local uses this information to
look up the other side of the channel and apply the same changes to it.
(closes issue #17673)
Reported by: Guggemand
Review: https://reviewboard.asterisk.org/r/903/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@286190 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r285962 | tilghman | 2010-09-10 00:32:18 -0500 (Fri, 10 Sep 2010) | 13 lines
Merged revisions 285961 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r285961 | tilghman | 2010-09-10 00:31:31 -0500 (Fri, 10 Sep 2010) | 6 lines
Another fix for Mac OS X.
While trying to fix this the "right" way, I wandered into dependency hell. Two
hours later, I backed out, and just removed the offending code. ast_inline_api
only goes one level deep and then it breaks. Ouch.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@285963 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r285931 | tilghman | 2010-09-09 20:25:50 -0500 (Thu, 09 Sep 2010) | 21 lines
Merged revisions 285930 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r285930 | tilghman | 2010-09-09 20:16:32 -0500 (Thu, 09 Sep 2010) | 14 lines
Merged revisions 285889 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r285889 | tilghman | 2010-09-09 19:13:45 -0500 (Thu, 09 Sep 2010) | 7 lines
Fix Mac OS X build.
This also fixes a rather grievous calculation error for the offset of
ast_fdset, which was masked on Linux and FreeBSD, because these platforms
check the first 256 FDs regardless of the bitmask setting (due to backwards
compatibility).
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@285932 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r284477 | twilson | 2010-09-01 13:44:36 -0500 (Wed, 01 Sep 2010) | 17 lines
Fix SRTP for changing SSRC and multiple a=crypto SDP lines
Adding code to Asterisk that changed the SSRC during bridges and masquerades
broke SRTP functionality. Also broken was handling the situation where an
incoming INVITE had more than one crypto offer. This patch caches the SRTP
policies the we use so that we can change the ssrc and inform libsrtp of the
new streams. It also uses the first acceptable a=crypto line from the incoming
INVITE.
(closes issue #17563)
Reported by: Alexcr
Patches:
srtp.diff uploaded by twilson (license 396)
Tested by: twilson
Review: https://reviewboard.asterisk.org/r/878/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@284479 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r283230 | russell | 2010-08-23 08:23:12 -0500 (Mon, 23 Aug 2010) | 7 lines
Make the AST_CEL_AMA enum match up with the AST_CDR_ ama flag values.
Really, having 2 enums for this is silly and error prone, demonstrated by
the crash that I hit because there was an assumption in the code that the
values in each matched up. However, this is a quick fix to get them to
match up so it will work.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@283232 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r282098 | rmudgett | 2010-08-12 17:06:06 -0500 (Thu, 12 Aug 2010) | 7 lines
Separate call completion config parameter allocation and default initialization.
If you ever have a need to reset the call completion config parameters
to defaults, now you can.
And no Virginia, C++ idioms do not always work in C.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@282099 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r282047 | dvossel | 2010-08-12 15:15:41 -0500 (Thu, 12 Aug 2010) | 35 lines
improved translation paths for wideband codecs
The problem I'm addressing is that Asterisk's current
method of building the least cost translation paths
between codecs does not take into account sample rate.
For instance, it was possible for siren14 (a 32khz codec),
to contain the a translation path to siren7 (a 16khz
audio codec) that goes through slin at 8khz. In this
case Asterisk takes a 32khz codec, down samples it to
8khz and then up samples it to 16khz which is terrible
regardless if it is computationally less expensive. This
patch now builds translation paths that give priority to
maintaining the best possible sample rate before taking
into consideration computational cost. This patch also
adds cli commands to expose what translation paths are
actually being used.
Changes:
1. Translation paths will never contain a step that changes
the sample rate unless absolutely necessary.
2. When choosing the best codec to make two channels compatible.
Shared codecs with the highest sample rate are given priority.
3. A new cli command to show all translation paths available
for a specific codec 'core show translation paths [codec name]'
has been added.
4. 'core show translation' which displays the translation
matrix now includes the new higher bit audio codecs in the table.
5. 'core show channel [channel name]' now displays the
translation paths if translation is used.
(closes issue #16841)
Reported by: dvossel
Review: https://reviewboard.asterisk.org/r/842/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@282048 65c4cc65-6c06-0410-ace0-fbb531ad65f3
David Vossel
Russell Bryant
Tilghman Lesher
Jeff Peeler
Matthew Nicholson
Stefan Schmidt
Richard Mudgett
Paul Belanger
Terry Wilson
Jason Parker
Jan Kalab
Olle Johansson
