ast_channel_search_locked need to be made. Specifically, the caller needs to be able to
pass arbitrary data which in turn is passed to the callback. This patch addresses all
of the nested functions currently in asterisk trunk.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@155590 65c4cc65-6c06-0410-ace0-fbb531ad65f3
channel list calling a caller-defined callback. The callback returns non-zero
if a match is found. This should speed up some of the code that I committed
earlier today in chan_sip (which is also updated by this commit).
Reviewed by russellb and kpfleming via ReviewBoard:
http://reviewboard.digium.com/r/28/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@154429 65c4cc65-6c06-0410-ace0-fbb531ad65f3
or when calling ast_waitfor(). These are inappropriate times to hold the channel
lock. This is what has caused "could not get the channel lock" messages from
chan_sip and has likely caused a negative impact on performance results of SIP
in Asterisk 1.6. Thanks to file for pointing out this section of code.
(closes issue #13287)
(closes issue #13115)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@141949 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r140690 | murf | 2008-09-02 16:40:13 -0600 (Tue, 02 Sep 2008) | 1 line
After reconsidering, with respect to 13409, ast_cdr_detach should be OK, better in fact, than ast_cdr_free, which generates lots of useless warnings that will undoubtably generate complaints.
Hmmm. It doesn't hush the useless warnings, but it does allow control of posting via the detach and post routines, for those possible situations,
where you'd want to post single-channel cdrs.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@140692 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r140670 | murf | 2008-09-02 16:15:57 -0600 (Tue, 02 Sep 2008) | 14 lines
(closes issue #13409)
Reported by: tomaso
Patches:
asterisk-1.6.0-rc2-cdrmemleak.patch uploaded by tomaso (license 564)
I basically spent the day, verifying that this patch
solves the problem, and doesn't hurt in non-problem
cases. Why valgrind did not plainly reveal this leak
absolutely mystifies and stuns me.
Many, many thanks to tomaso for finding and providing the fix.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@140691 65c4cc65-6c06-0410-ace0-fbb531ad65f3
would reset to 500 ms every time a non-voice frame
was received. The total time we poll should be 500 ms, so
now we save the amount of time left after the poll returned
and use that as our argument for the next call to poll
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@136633 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Instead, poll the channel until receiving a voice frame. The
cap on this poll is 500 ms.
The optional delay is still allowable in the Answer() application,
but the delay has been moved back to its original position, after
the call to the channel's answer callback. The poll for the voice
frame will not happen if a delay is specified when calling Answer().
(closes issue #12708)
Reported by: kactus
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@136631 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r135841 | mmichelson | 2008-08-05 19:25:10 -0500 (Tue, 05 Aug 2008) | 27 lines
Merging the issue11259 branch.
The purpose of this branch was to take into account
"burps" which could cause jitterbuffers to misbehave.
One such example is if the L option to Dial() were used
to inject audio into a bridged conversation at regular
intervals. Since the audio here was not passed through
the jitterbuffer, it would cause a gap in the jitterbuffer's
timestamps which would cause a frames to be dropped for a
brief period.
Now ast_generic_bridge will empty and reset the jitterbuffer
each time it is called. This causes injected audio to be handled
properly.
ast_generic_bridge also will empty and reset the jitterbuffer
if it receives an AST_CONTROL_SRCUPDATE frame since the change
in audio source could negatively affect the jitterbuffer.
All of this was made possible by adding a new public API call
to the abstract_jb called ast_jb_empty_and_reset.
(closes issue #11259)
Reported by: plack
Tested by: putnopvut
........
r135847 | mmichelson | 2008-08-05 19:27:54 -0500 (Tue, 05 Aug 2008) | 4 lines
Revert inadvertent changes to app_skel that occurred when
I was testing for a memory leak
........
r135850 | mmichelson | 2008-08-05 19:29:54 -0500 (Tue, 05 Aug 2008) | 3 lines
Remove properties that should not be here
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@135851 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r135799 | murf | 2008-08-05 17:13:20 -0600 (Tue, 05 Aug 2008) | 34 lines
(closes issue #12982)
Reported by: bcnit
Tested by: murf
I discovered that also, in the previous bug fixes and changes,
the cdr.conf 'unanswered' option is not being obeyed, so
I fixed this.
And, yes, there are two 'answer' times involved in this
scenario, and I would agree with you, that the first
answer time is the time that should appear in the CDR.
(the second 'answer' time is the time that the bridge
was begun).
I made the necessary adjustments, recording the first
answer time into the peer cdr, and then using that to
override the bridge cdr's value.
To get the 'unanswered' CDRs to appear, I purposely
output them, using the dial cmd to mark them as
DIALED (with a new flag), and outputting them if
they bear that flag, and you are in the right mode.
I also corrected one small mention of the Zap device
to equally consider the dahdi device.
I heavily tested 10-sec-wait macros in dial, and
without the macro call; I tested hangups while the
macro was running vs. letting the macro complete
and the bridge form. Looks OK. Removed all the
instrumentation and debug.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@135821 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r133649 | tilghman | 2008-07-25 12:19:39 -0500 (Fri, 25 Jul 2008) | 8 lines
Fix some errant device states by making the devicestate API more strict in
terms of the device argument (only without the unique identifier appended).
(closes issue #12771)
Reported by: davidw
Patches:
20080717__bug12771.diff.txt uploaded by Corydon76 (license 14)
Tested by: davidw, jvandal, murf
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@133665 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r127663 | murf | 2008-07-02 18:16:25 -0600 (Wed, 02 Jul 2008) | 30 lines
The CDRfix4/5/6 omnibus cdr fixes.
(closes issue #10927)
Reported by: murf
Tested by: murf, deeperror
(closes issue #12907)
Reported by: falves11
Tested by: murf, falves11
(closes issue #11849)
Reported by: greyvoip
As to 11849, I think these changes fix the core problems
brought up in that bug, but perhaps not the more global
problems created by the limitations of CDR's themselves
not being oriented around transfers.
Reopen if necc, but bug reports are not the best
medium for enhancement discussions. We need to start
a second-generation CDR standardization effort to cover
transfers.
(closes issue #11093)
Reported by: rossbeer
Tested by: greyvoip, murf
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@127793 65c4cc65-6c06-0410-ace0-fbb531ad65f3
callback. This change differs from commit 127113 in that now the
channel is not set to AST_STATE_UP until after the answer callback.
(closes issue #12924)
Reported by: snyfer
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@127157 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- change ast_settimeout() to honor max rate in edge cases of file playback
(this will make some warning messages go away at the end of playing back
a file)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@125332 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r125132 | kpfleming | 2008-06-25 17:21:30 -0500 (Wed, 25 Jun 2008) | 10 lines
allow tonezone to live in a different place than DAHDI/Zaptel, since dahdi-tools and dahdi-linux are now separate packages and can be installed in different places
don't include tonezone.h in dahdi_compat.h, because only a couple of modules need it
get app_rpt building again after the DAHDI changes
(closes issue #12911)
Reported by: tzafrir
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@125138 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Convert the last part of channel.c over to use the timing API. This would
not have made a difference when using the dahdi timing module. I noticed
it when trying to use another timing source. Oops. :)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@122923 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Convert chan_iax2 to use the timing API
- Convert usage of timing in the core to use the timing API instead of
using DAHDI directly
- Make a change to the timing API to add the set_rate() function
- change the timing core to use a rwlock
- merge a timing implementation, res_timing_dahdi
Basic testing was successful using res_timing_dahdi
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@122523 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r122130 | tilghman | 2008-06-12 10:11:30 -0500 (Thu, 12 Jun 2008) | 4 lines
Occasionally, the alertpipe loses its nonblocking status, so detect and correct
that situation before it causes a deadlock. (Reported and tested by ctooley
via #asterisk-dev)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@122131 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r121280 | russell | 2008-06-09 11:35:40 -0500 (Mon, 09 Jun 2008) | 10 lines
Do not attempt to do emulation if an END digit is received and the length is
less than the defined minimum digit length, and the other end only wants END
digits (SIP INFO, for example).
(closes issue #12778)
Reported by: tsearle
Patches:
12778.rev1.txt uploaded by russell (license 2)
Tested by: tsearle
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@121282 65c4cc65-6c06-0410-ace0-fbb531ad65f3
hold tracking information for mutexes. Now, the "core show locks" output
will output information about who is holding a rwlock when a thread is
waiting on it.
(closes issue #11279)
Reported by: ys
Patches:
trunk_lock_utils.v8.diff uploaded by ys (license 281)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@120064 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- make data member of the ast_frame struct a named union instead of a void
Recently the ast_queue_hangup function got a new parameter, the hangupcause
Feedback came in that this is no good and that instead a new function should be created.
This I did.
The hangupcause was stored in the seqno member of the ast_frame struct. This is not very
elegant, and since there's already a data member that one should be used.
Problem is, this member was a void *.
Now it's a named union so it can hold a pointer, an uint32 and there's a padding in case someone
wants to store another type in there in the future.
This commit is so massive, because all ast_frame.data uses have to be
altered to ast_frame.data.data
Thanks russellb and kpfleming for the feedback.
(closes issue #12674)
Reported by: mvanbaak
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@117802 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r116088 | mmichelson | 2008-05-13 18:47:49 -0500 (Tue, 13 May 2008) | 12 lines
A change to the way channel locks are handled when DEBUG_CHANNEL_LOCKS is defined.
After debugging a deadlock, it was noticed that when DEBUG_CHANNEL_LOCKS
is enabled in menuselect, the actual origin of channel locks is obscured
by the fact that all channel locks appear to happen in the function
ast_channel_lock(). This code change redefines ast_channel_lock to be a
macro which maps to __ast_channel_lock(), which then relays the proper
file name, line number, and function name information to the core lock
functions so that this information will be displayed in the case that
there is some sort of locking error or core show locks is issued.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@116089 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r114117 | mmichelson | 2008-04-14 12:41:03 -0500 (Mon, 14 Apr 2008) | 11 lines
Increase the retry count when attempting to show channels. This apparently
cleared an issue someone was seeing when attempting to show channels when
the load was high.
(closes issue #11667)
Reported by: falves11
Patches:
11677.txt uploaded by russell (license 2)
Tested by: falves11
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114118 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r114106 | mmichelson | 2008-04-14 09:58:02 -0500 (Mon, 14 Apr 2008) | 5 lines
Save a local copy of the generate callback prior to unlocking the channel in
case the generate callback goes NULL on us after the channel is unlocked. Thanks
to Russell for pointing this need out to me.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114107 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r113065 | mmichelson | 2008-04-07 11:08:45 -0500 (Mon, 07 Apr 2008) | 13 lines
This fix prevents a deadlock that was experienced in chan_local. There was
deadlock prevention in place in chan_local, but it would not work in a specific
case because the channel was recursively locked. By unlocking the channel prior
to calling the generator's generate callback in ast_read_generator_actions(), we
prevent the recursive locking, and therefore the deadlock.
(closes issue #12307)
Reported by: callguy
Patches:
12307.patch uploaded by putnopvut (license 60)
Tested by: callguy
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@113066 65c4cc65-6c06-0410-ace0-fbb531ad65f3