Based on cli_permissions.conf configuration file, we are able to permit or deny
cli commands based on some patterns and the local user and group running rasterisk.
(Sorry if I missed some of the testers).
Reviewboard: http://reviewboard.digium.com/r/11/
(closes issue #11123)
Reported by: eliel
Tested by: eliel, IgorG, Laureano, otherwiseguy, mvanbaak
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@160062 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Add CLI aliases module to asterisk.
- Remove all deprecated CLI commands from the code
Initial work done by file.
Junk-Y and lmadsen did a lot of work and testing to
get the list of deprecated commands into the configuration file.
Deprecated CLI commands are now handled by this new module,
see cli_aliases.conf for more info about that.
ok russellb@ via reviewboard
(closes issue #13735)
Reported by: mvanbaak
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@156120 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prodded on IRC by Russell and fixed by eliel
(closes issue #13730)
Reported by: eliel
Patches:
main_cli.patch uploaded by eliel (license 64)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@150664 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: nickpeirson
Patches:
pbx.c.patch uploaded by nickpeirson (license 579)
replace_bzero+bcopy.patch uploaded by nickpeirson (license 579)
Tested by: nickpeirson, murf
1. replaced all refs to bzero and bcopy to memset and memmove instead.
2. added a note to the CODING-GUIDELINES
3. add two macros to asterisk.h to prevent bzero, bcopy from creeping
back into the source
4. removed bzero from configure, configure.ac, autoconfig.h.in
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@147807 65c4cc65-6c06-0410-ace0-fbb531ad65f3
the first item in the CLI entry list. This was preventing '!' from
showing up in either 'help' or in tab completion.
(closes issue #13578)
Reported by: mvanbaak
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@146198 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This work is done by lmadsen, junky and mvanbaak
during AstriDevCon.
This is the second audit the CLI got, and
this time lmadsen made sure he had _ALL_ modules
loaded that have CLI commands in them.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@145121 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Changes applied by this patch:
- Fix autocompletion in 'sip prune realtime', sip peers where never auto completed. Now we complete this command with:
'sip prune realtime peer' -> all | like | sip peers
Also I have modified the syntax in the usage, was wrong...
- Pass ast_cli_args->argv and ast_cli_args->argc while running autocompletion on CLI commands (CLI_GENERATE).
With this we avoid comparisons on ast_cli_args->line like this:
strcasestr(a->line, " description")
strcasestr(a->line, "descriptions ")
strcasestr(a->line, "realtime peer"), and so on..
Making the code more confusing (check the spaces in description!).
The only thing we must be sure is to first check a->pos or a->argc.
- Fix 'iax2 prune realtime' autocompletion, now we autocomplete this command with 'all' & 'iax2 peers', check a look that iax2 peers where all the peers, now only the ones in the cache..
(closes issue #13133)
Reported by: eliel
Patches:
clichanges.patch uploaded by eliel (license 64)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@141464 65c4cc65-6c06-0410-ace0-fbb531ad65f3
AMI commands can display that a channel is under control of an AGI.
Work inspired by work at customer site, but paid for by Edvina AB
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@128240 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r118551 | tilghman | 2008-05-27 14:15:27 -0500 (Tue, 27 May 2008) | 6 lines
When showing an error message for a command, don't shorten the command output,
as it tends to confuse the user (it's fine for suggesting other commands,
however).
Reported by: seanbright (on #asterisk-dev)
Fixed by: me
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@118554 65c4cc65-6c06-0410-ace0-fbb531ad65f3
actual problems, per se. I also added format attributes to any printf wrapper functions I found that didn't have them. -Wsecurity and -Wmissing-format-attribute added to --enable-dev-mode.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@109447 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Restructure other changes to UPGRADE.txt and CHANGES
We're still looking for scripts that replace
asterisk -rx "show shannels concise"
by using the manager interface, but still produces the same output.
Anyone?
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89606 65c4cc65-6c06-0410-ace0-fbb531ad65f3
build times - tested, there is no measureable difference before and
after this commit.
In this change:
use asterisk/compat.h to include a small set of system headers:
inttypes.h, unistd.h, stddef.h, stddint.h, sys/types.h, stdarg.h,
stdlib.h, alloca.h, stdio.h
Where available, the inclusion is conditional on HAVE_FOO_H as determined
by autoconf.
Normally, source files should not include any of the above system headers,
and instead use either "asterisk.h" or "asterisk/compat.h" which does it
better.
For the time being I have left alone second-level directories
(main/db1-ast, etc.).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89333 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- the *_CURRENT macros no longer need the list head pointer argument
- add AST_LIST_MOVE_CURRENT to encapsulate the remove/add operation when moving entries between lists
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89106 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r85532 | russell | 2007-10-13 00:24:33 -0500 (Sat, 13 Oct 2007) | 8 lines
Properly handle the case where read() may return the text for more than one
CLI command at once for a remote console.
(closes issue #10888)
Reported by: jamesgolovich
Patches:
asterisk-climultiple.diff.txt uploaded by jamesgolovich (license 176)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@86585 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r85533 | russell | 2007-10-13 01:48:10 -0400 (Sat, 13 Oct 2007) | 12 lines
Fix an issue with console verbosity when running asterisk -rx to execute a command
and retrieve its output. The issue was that there was no way for the main Asterisk
process to know that the remote console was connecting in the -rx mode. The way that
James has fixed this is to have all remote consoles muted by default. Then, regular
remote consoles automatically execute a CLI command to unmute themselves when they
first start up.
(closes issue #10847)
Reported by: atis
Patches:
asterisk-consolemute.diff.txt uploaded by jamesgolovich (license 176)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@85534 65c4cc65-6c06-0410-ace0-fbb531ad65f3
another CLI command with the same command text registered. This prevents
a crash if someone accidentally calls ast_cli_register() on the same CLI
command data twice. This also fixes a small bug where the helpers list
would get unlocked without being locked if building the full command failed.
(closes issue #10858, reported by jamesgolovich, patched by me)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@84169 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: bbryant
Patches:
20070720__core_debug_by_file.patch uploaded by bbryant (license 36)
(with some modifications by me)
Tested by: russell, bbryant
This set of changes introduces the ability to set the core debug or verbose
levels on a per-file basis. Interestingly enough, in 1.4, you have the ability
to set core debug for a single file, but that functionality was accidentally
lost in the conversion of the CLI commands to the new format.
This patch improves upon what was in 1.4 by letting you set it for more than 1
file, and by also supporting verbose.
*** Janitor Project ***
This patch also introduces a new macro, ast_verb(), which is similar
to ast_debug(). Setting the per file verbose value only works for messages that
use this macro. Converting existing uses of ast_verbose() can be done like:
if (option_debug > 2)
ast_verbose(VERBOSE_PREFIX_3 "Something useful\n");
...
ast_verb(3, "Something useful\n");
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@76555 65c4cc65-6c06-0410-ace0-fbb531ad65f3
for extracting application, function, manager, and agi documentation is the wrong
one to take. The most severe problem is that the output depends on which modules
are loaded as well as compile time options, which both determine which parts are
available.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@72986 65c4cc65-6c06-0410-ace0-fbb531ad65f3