Replace usage of ao2_container_alloc with ao2_container_alloc_hash or
ao2_container_alloc_list. Remove ao2_container_alloc macro.
Change-Id: I0907d78bc66efc775672df37c8faad00f2f6c088
* acl (named_acl.c)
* cdr
* cel
* ccss
* dnsmgr
* dsp
* enum
* extconfig (config.c)
* features
* http
* indications
* logger
* manager
* plc
* sounds
* udptl
These modules are now loaded at appropriate time by the module loader.
Unlike loadable modules these use AST_MODULE_LOAD_FAILURE on error so
the module loader will abort startup on failure of these modules.
Some of these modules are still initialized or shutdown from outside the
module loader. logger.c is initialized very early and shutdown very
late, manager.c is initialized by the module loader but is shutdown by
the Asterisk core (too much uses it without holding references).
Change-Id: I371a9a45064f20026c492623ea8062d02a1ab97f
fopencookie/funclose is a non-standard API and should not be used
in portable software. Additionally, the way FILE's fd is used in
non-blocking mode is undefined behaviour and cannot be relied on.
This introduces internal abstraction for io streams, that allows
implementing the desired virtualization of read/write operations
with necessary timeout handling.
ASTERISK-24515 #close
ASTERISK-24517 #close
Change-Id: Id916aef418b665ced6a7489aef74908b6e376e85
ASTERISK_REGISTER_FILE no longer has any purpose so this commit removes
all traces of it.
Previously exported symbols removed:
* __ast_register_file
* __ast_unregister_file
* ast_complete_source_filename
This also removes the mtx_prof static variable that was declared when
MTX_PROFILE was enabled. This variable was only used in lock.c so it
is now initialized in that file only.
ASTERISK-26480 #close
Change-Id: I1074af07d71f9e159c48ef36631aa432c86f9966
* heap-use-after-free happens when we free "cfg"
but then use "value" which refers to it
* A memory leak occurs because in some cases
it is not released "defaults"
ASTERISK-25721 #close
Reported by: Badalyan Vyacheslav
Tested by: Badalyan Vyacheslav
Change-Id: I3807d3f4726df6864430ec144cf6265d3f538469
test_dlinklists doesn't need to NOTICE everyone that every macro worked.
res_phoneprov doesn't need to VERBOSE everyone that a phoneprov extension or
provider was registered.
res_odbc was missing a newline at the end of one message.
Change-Id: I6c06361518ef3711821795e535acd439782a995e
Git does not support the ability to replace a token with a version
string during check-in. While it does have support for replacing a
token on clone, this is somewhat sub-optimal: the token is replaced
with the object hash, which is not particularly easy for human
consumption. What's more, in practice, the source file version was often
not terribly useful. Generally, when triaging bugs, the overall version
of Asterisk is far more useful than an individual SVN version of a file. As a
result, this patch removes Asterisk's support for showing source file
versions.
Specifically, it does the following:
* Rename ASTERISK_FILE_VERSION macro to ASTERISK_REGISTER_FILE, and
remove passing the version in with the macro. Other facilities
than 'core show file version' make use of the file names, such as
setting a debug level only on a specific file. As such, the act of
registering source files with the Asterisk core still has use. The
macro rename now reflects the new macro purpose.
* main/asterisk:
- Refactor the file_version structure to reflect that it no longer
tracks a version field.
- Remove the "core show file version" CLI command. Without the file
version, it is no longer useful.
- Remove the ast_file_version_find function. The file version is no
longer tracked.
- Rename ast_register_file_version/ast_unregister_file_version to
ast_register_file/ast_unregister_file, respectively.
* main/manager: Remove value from the Version key of the ModuleCheck
Action. The actual key itself has not been removed, as doing so would
absolutely constitute a backwards incompatible change. However, since
the file version is no longer tracked, there is no need to attempt to
include it in the Version key.
* UPGRADE: Add notes for:
- Modification to the ModuleCheck AMI Action
- Removal of the "core show file version" CLI command
Change-Id: I6cf0ff280e1668bf4957dc21f32a5ff43444a40e
res_pjsip_phoneprov_provider was leaking references to phoneprov objects due to
a missing OBJ_NODATA in an ao2_callback in load_users(). Rather than adding the
OBJ_NODATA, I changed load_users to use a more straightforward ao2_iterator.
This plugged the leak but exposed an unload order issue between
res_pjsip_phoneprov_provider, res_phoneprov and res_pjsip.
res_pjsip_phoneprov_provider unloads first, then res_phoneprov, then res_pjsip.
Since res_pjsip_phoneprov_provider uses res_pjsip's sorcery instance, when it
unloads, it's objects are still in the sorcery instance. When res_pjsip
unloads, it destroys all its objects including res_pjsip_phoneprov_provider's.
The phoneprov destructor then attempts to unregister the extension from
res_phoneprov but because res_phoneprov is already cleaned up, its users
container is gone and we get a FRACK.
Simple solution, check for the NULL users container before attempting to remove
the entry. Duh.
Ran tests/res_phoneprov/res_phoneprov_provider. No leaks in
res_pjsip_phoneprov_provider and no FRACKs.
Reported-by: Corey Farrell
Tested-by: George Joseph
Review: https://reviewboard.asterisk.org/r/4608/
ASTERISK-24935 #close
........
Merged revisions 434545 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@434547 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In res_phoneprov, unloading the module first destroys the http_routes
container, followed by the users. However, users may have a route in
the http_routes container; the validity of this container is not checked
in the users destructor. Hence, we hit an assert as the container has already
been set to NULL.
This patch does two things:
(1) It adds a sanity check in the user destructor (because why not)
(2) It switches the order of destruction, so that users are disposed of prior
to the HTTP routes they may hold a reference to.
Note that this crash was caught by the Test Suite (go go testing!)
........
Merged revisions 426174 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 426176 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@426179 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If res_phoneprov failed to fully load (due to not being configured), the
providers container will be NULL. If a module attempts to register a phone
provisioning provider, it should check for the presence of the container.
If there is no providers container, it should return an error.
This patch makes the ast_phoneprov_provider_register function do that...
otherwise this would be a silly commit message.
........
Merged revisions 425220 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 425221 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425222 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch makes res_phoneprov more modular so other modules (like pjsip)
can provide configuration information instead of res_phoneprov relying solely
on users.conf and sip.conf. To accomplish this a new ast_phoneprov public API
is now exposed which allows config providers to register themselves, set
defaults (server profile, etc) and add user extensions.
* ast_phoneprov_provider_register registers the provider and provides callbacks
for loading default settings and loading users.
* ast_phoneprov_provider_unregister clears the defaults and users.
* ast_phoneprov_add_extension should be called once for each user/extension
by the provider's load_users callback to add them.
* ast_phoneprov_delete_extension deletes one extension.
* ast_phoneprov_delete_extensions deletes all extensions for the provider.
Tested-by: George Joseph
Review: https://reviewboard.asterisk.org/r/3970/
........
Merged revisions 424963 from http://svn.asterisk.org/svn/asterisk/branches/12
........
Merged revisions 424964 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@424965 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This gets rid of most old libc free/malloc/realloc and replaces them
with ast_free and friends. When compiling with MALLOC_DEBUG you'll
notice it when you're mistakenly using one of the libc variants. For
the legacy cases you can define WRAP_LIBC_MALLOC before including
asterisk.h.
Even better would be if the errors were also enabled when compiling
without MALLOC_DEBUG, but that's a slightly more invasive header
file change.
Those compiling addons/format_mp3 will need to rerun
./contrib/scripts/get_mp3_source.sh.
ASTERISK-24348 #related
Review: https://reviewboard.asterisk.org/r/4015/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423978 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Persistent HTTP connection support is needed due to the increased usage of
the Asterisk core HTTP transport and the frequency at which REST API calls
are going to be issued.
* Add http.conf session_keep_alive option to enable persistent
connections.
* Parse and discard optional chunked body extension information and
trailing request headers.
* Increased the maximum application/json and
application/x-www-form-urlencoded body size allowed to 4k. The previous
1k was kind of small.
* Removed a couple inlined versions of ast_http_manid_from_vars() by
calling the function. manager.c:generic_http_callback() and
res_http_post.c:http_post_callback()
* Add missing va_end() in ast_ari_response_error().
* Eliminated unnecessary RAII_VAR() use in http.c:auth_create().
ASTERISK-23552 #close
Reported by: Scott Griepentrog
Review: https://reviewboard.asterisk.org/r/3691/
........
Merged revisions 417880 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417901 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Update and extend the configuration_file group and enable linking to the resource. Update title that was left behind many years ago.
(issue ASTERISK-20259)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375003 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r310240 | twilson | 2011-03-10 10:05:45 -0600 (Thu, 10 Mar 2011) | 13 lines
Add \r\n to remaining http headers passed to ast_http_send
r309204 changed the behavior of ast_http_send. It now requires headers
to be passed with trailing \r\n. This change updates the remaining
instances in the code that did not pass the \r\n.
(closes issue #18186)
Reported by: nivaldomjunior
Patches:
res_phoneprov.c.diff uploaded by lathama (license 1028)
manager.diff.txt uploaded by twilson (license 396)
Tested by: lathama
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@310241 65c4cc65-6c06-0410-ace0-fbb531ad65f3
After the manager http auth changes, we forgot to remove the manual
sending of the file. Also, ast_http_send adds two \r\n to the header that
is passed to it, so a trailing \r\n is removed from the Content-type
header. It might be better to change ast_http_send, but I don't like changing
the behavior of an API function.
(closes issue #17239)
Reported by: cjacobsen
Patches:
patch2.diff uploaded by cjacobsen (license 1029)
Tested by: lathama, cjacobsen
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@270660 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r222152 | kpfleming | 2009-10-05 20:16:36 -0500 (Mon, 05 Oct 2009) | 20 lines
Fix ao2_iterator API to hold references to containers being iterated.
See Mantis issue for details of what prompted this change.
Additional notes:
This patch changes the ao2_iterator API in two ways: F_AO2I_DONTLOCK
has become an enum instead of a macro, with a name that fits our
naming policy; also, it is now necessary to call
ao2_iterator_destroy() on any iterator that has been
created. Currently this only releases the reference to the container
being iterated, but in the future this could also release other
resources used by the iterator, if the iterator implementation changes
to use additional resources.
(closes issue #15987)
Reported by: kpfleming
Review: https://reviewboard.asterisk.org/r/383/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@222176 65c4cc65-6c06-0410-ace0-fbb531ad65f3
gcc 4.4 has more strict rules for aliasing. It doesn't like a
struct sockaddr_in pointer pointing to a struct sockaddr. So we make it
a union.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@217445 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Move function PP_EACH_USER and PP_EACH_EXTENSION documentation to the new
AstXML form.
(issue #15245)
Reported by: eliel
Patches:
res_phoneprov_static_conversion.txt uploaded by lmadsen (license 10)
(with PP_EACH_USER add by me)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@199411 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This branch adds additional methods to dialplan functions, whereby the result
buffers are now dynamic buffers, which can be expanded to the size of any
result. No longer are variable substitutions limited to 4095 bytes of data.
In addition, the common case of needing buffers much smaller than that will
enable substitution to only take up the amount of memory actually needed.
The existing variable substitution routines are still available, but users
of those API calls should transition to using the dynamic-buffer APIs.
Reviewboard: http://reviewboard.digium.com/r/174/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@191140 65c4cc65-6c06-0410-ace0-fbb531ad65f3
it would be best to maintain API compatibility. Instead, this commit introduces
ao2_callback_data() which is functionally identical to ao2_callback() except
that it allows you to pass arbitrary data to the callback.
Reviewed by Mark Michelson via ReviewBoard:
http://reviewboard.digium.com/r/64
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@158959 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ao2_callback and ao2_find). Currently, passing OBJ_POINTER to either
of these mandates that the passed 'arg' is a hashable object, making
searching for an ao2 object based on outside criteria difficult.
Reviewed by Russell and Mark M. via ReviewBoard:
http://reviewboard.digium.com/r/36/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@155401 65c4cc65-6c06-0410-ace0-fbb531ad65f3
when a file is invalid from when a file is missing. This is most important when
we have two configuration files. Consider the following example:
Old system:
sip.conf users.conf Old result New result
======== ========== ========== ==========
Missing Missing SIP doesn't load SIP doesn't load
Missing OK SIP doesn't load SIP doesn't load
Missing Invalid SIP doesn't load SIP doesn't load
OK Missing SIP loads SIP loads
OK OK SIP loads SIP loads
OK Invalid SIP loads incompletely SIP doesn't load
Invalid Missing SIP doesn't load SIP doesn't load
Invalid OK SIP doesn't load SIP doesn't load
Invalid Invalid SIP doesn't load SIP doesn't load
So in the case when users.conf doesn't load because there's a typo that
disrupts the syntax, we may only partially load users, instead of failing with
an error, which may cause some calls not to get processed. Worse yet, the old
system would do this with no indication that anything was even wrong.
(closes issue #10690)
Reported by: dtyoo
Patches:
20080716__bug10690.diff.txt uploaded by Corydon76 (license 14)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@142992 65c4cc65-6c06-0410-ace0-fbb531ad65f3